source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectPrint.asm@ 394

Last change on this file since 394 was 392, checked in by aitotat@…, 13 years ago

Changes to XTIDE Universal BIOS:

  • Greatly improved Hotkey Bar is displayed during drive detection.
  • 8k builds no longer include boot menu.
  • Boot menu is displayed only if F2 is pressed during drive detection.
  • Some changes to directory structure.


File size: 8.6 KB
RevLine 
[88]1; Project name : XTIDE Universal BIOS
[3]2; Description : Functions for printing drive detection strings.
3
[376]4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
[3]20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
[392]24; DetectPrint_InitializeDisplayContext
[386]25; Parameters:
26; Nothing
27; Returns:
28; Nothing
29; Corrupts registers:
30; AX, DI
31;--------------------------------------------------------------------
[392]32DetectPrint_InitializeDisplayContext:
33 CALL_DISPLAY_LIBRARY InitializeDisplayContext
[386]34 ret
35
36
37;--------------------------------------------------------------------
[392]38; DetectPrint_GetSoftwareCoordinatesToAX
39; Parameters:
40; Nothing
41; Returns:
42; Nothing
43; Corrupts registers:
44; AX, DI
45;--------------------------------------------------------------------
46DetectPrint_GetSoftwareCoordinatesToAX:
47 CALL_DISPLAY_LIBRARY GetSoftwareCoordinatesToAX
48 ret
49
50
51;--------------------------------------------------------------------
[3]52; Prints BIOS name and segment address where it is found.
53;
54; DetectPrint_RomFoundAtSegment
55; Parameters:
56; Nothing
57; Returns:
58; Nothing
59; Corrupts registers:
[120]60; AX, SI, DI
[3]61;--------------------------------------------------------------------
62DetectPrint_RomFoundAtSegment:
[88]63 push bp
[97]64 mov bp, sp
[3]65 mov si, g_szRomAt
[88]66 ePUSH_T ax, ROMVARS.szTitle ; Bios title string
67 push cs ; BIOS segment
[242]68
[386]69 jmp DetectPrint_FormatCSSIfromParamsInSSBP
[3]70
71
72;--------------------------------------------------------------------
[294]73; DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
[3]74; Parameters:
[233]75; CS:CX: Ptr to "Master" or "Slave" string
[3]76; CS:BP: Ptr to IDEVARS
[242]77; SI: Ptr to template string
[3]78; Returns:
79; Nothing
80; Corrupts registers:
[196]81; AX, SI, DI, CX
[3]82;--------------------------------------------------------------------
[294]83DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP:
[233]84 mov ax, [cs:bp+IDEVARS.wPort] ; for IDE: AX=port address, DH=.bDevice
85 mov dx, [cs:bp+IDEVARS.bDevice-1] ; for Serial: AL=port address>>2, AH=baud rate
86 ; DL=COM number character, DH=.bDevice
[285]87%ifdef MODULE_JRIDE
88 cmp dh, DEVICE_JRIDE_ISA
89 eCMOVE ax, cs ; Use segment address for JR-IDE/ISA
90%endif
91
[242]92 push bp ; setup stack for call to
[233]93 mov bp, sp ; BootMenuPrint_FormatCSSIfromParamsInSSBP
94
95 push cx ; Push "Master" or "Slave"
[242]96
[233]97 mov cl, (g_szDetectPort-$$) & 0xff ; Setup print string for standard IDE
98 ; Note that we modify only the low order bits of CX a lot here,
99 ; saving code space rather than reloading CX completely.
100 ; This optimization requires that all the g_szDetect* strings are
101 ; on the same 256 byte page, which is checked in strings.asm.
[3]102
[277]103%ifdef MODULE_SERIAL
[244]104 cmp dh, DEVICE_SERIAL_PORT ; Check if this is a serial device
[233]105
[244]106 jnz .pushAndPrint ; CX = string to print, AX = port address, DX won't be used
[233]107
108 mov cl, (g_szDetectCOM-$$) & 0xff ; Setup print string for COM ports
109 push cx ; And push now. We use the fact that format strings can contain
110 ; themselves format strings.
111
112 push dx ; Push COM number character
[242]113 ; If the string is going to be "Auto", we will push a NULL (zero)
114 ; here for the COM port number, which will be eaten by the
115 ; print routine (DisplayPrint_CharacterFromAL), resulting in
[235]116 ; just "COM" being printed without a character after it.
[242]117
[233]118 mov cl, (g_szDetectCOMAuto-$$) & 0xff ; Setup secondary print string for "Auto"
[242]119
[244]120 test dl, dl ; Check if serial port "Auto"
[262]121 jz .pushAndPrintSerial ; CX = string to print, AX and DX won't be used
[242]122
[233]123 mov cl, (g_szDetectCOMLarge-$$) & 0xff ; Setup secondary print string for "COMn/xx.yK"
[3]124
[233]125 mov al,ah ; baud rate divisor to AL
126 cbw ; clear AH, AL will always be less than 128
127 xchg si,ax ; move AX to SI for divide
[242]128 mov ax,1152 ; baud rate to display is 115200/divisor, the "00" is handled
[233]129 ; in the print strings
[242]130 cwd ; clear top 16-bits of dividend
[233]131 div si ; and divide... Now AX = baud rate/100, DX = 0 (always a clean divide)
[242]132
[233]133 mov si,10 ; Now separate the whole portion from the fractional for "K" display
134 div si ; and divide... Now AX = baud rate/1000, DX = low order digit
[242]135
136 cmp ax,si ; < 10: "2400", "9600", etc.; >= 10: "19.2K", "38.4K", etc.
[262]137 jae .pushAndPrintSerial
[196]138
[233]139 mov cl, (g_szDetectCOMSmall-$$) & 0xff ; Setup secondary print string for "COMn/XXy00"
[242]140
[294]141.pushAndPrintSerial:
[242]142.pushAndPrint:
[277]143%endif
[294]144
[233]145 push cx ; Push print string
146 push ax ; Push high order digits, or port address, or N/A
147 push dx ; Push low order digit, or N/A
148
[334]149 mov si, g_szDetectOuter ; Load SI with default wrapper string "IDE %s at %s: "
150
[386]151 jmp SHORT DetectPrint_FormatCSSIfromParamsInSSBP
[196]152
153
[3]154;--------------------------------------------------------------------
[98]155; DetectPrint_DriveNameFromBootnfoInESBX
[3]156; Parameters:
[254]157; ES:BX: Ptr to BOOTMENUINFO (if drive found)
[3]158; Returns:
159; Nothing
160; Corrupts registers:
[88]161; AX, SI
[3]162;--------------------------------------------------------------------
[98]163DetectPrint_DriveNameFromBootnfoInESBX:
[88]164 push di
165 push bx
166
[254]167 lea si, [bx+BOOTMENUINFO.szDrvName]
[88]168 mov bx, es
169 CALL_DISPLAY_LIBRARY PrintNullTerminatedStringFromBXSI
170 CALL_DISPLAY_LIBRARY PrintNewlineCharacters
171
172 pop bx
173 pop di
174 ret
[386]175
176;--------------------------------------------------------------------
177; DetectPrint_FailedToLoadFirstSector
178; Parameters:
179; AH: INT 13h error code
180; Returns:
181; Nothing
182; Corrupts registers:
183; AX, CX, SI, DI
184;--------------------------------------------------------------------
185DetectPrint_FailedToLoadFirstSector:
186 push bp
187 mov bp, sp
188 eMOVZX cx, ah
189 push cx ; Push INT 13h error code
190 mov si, g_szReadError
191 jmp SHORT DetectPrint_FormatCSSIfromParamsInSSBP
192
193
194;--------------------------------------------------------------------
195; DetectPrint_TryToBootFromDL
196; Parameters:
197; DL: Drive to boot from (translated, 00h or 80h)
198; DS: RAMVARS segment
199; Returns:
200; Nothing
201; Corrupts registers:
[392]202; AX, DH, SI, DI
[386]203;--------------------------------------------------------------------
204DetectPrint_TryToBootFromDL:
205 push bp
206 mov bp, sp
207
[392]208 call DriveXlate_ToOrBack ; DL = Untranslated Drive number
209 mov dh, dl
210 call DriveXlate_ToOrBack ; DL = Translated Drive number
[386]211
[392]212 call HotkeyBar_ConvertDriveNumberFromDLtoDriveLetter ; DL = Translated letter
213 xchg dl, dh
214 call HotkeyBar_ConvertDriveNumberFromDLtoDriveLetter ; DL = Untranslated letter
215 push dx
216 xchg dl, dh
217 push dx
[386]218
[392]219 call ConvertDriveLetterInDLtoDriveNumber ; Restore DL
220
[386]221 mov si, g_szTryToBoot
222 jmp SHORT DetectPrint_FormatCSSIfromParamsInSSBP
223
224
225;--------------------------------------------------------------------
226; DetectPrint_NullTerminatedStringFromCSSIandSetCF
227; Parameters:
228; CS:SI: Ptr to NULL terminated string to print
229; Returns:
230; CF: Set since menu event was handled successfully
231; Corrupts registers:
232; AX, DI
233;--------------------------------------------------------------------
234DetectPrint_NullTerminatedStringFromCSSIandSetCF:
235;
236; We send all CSSI strings through the Format routine for the case of
237; compressed strings, but this doesn't hurt in the non-compressed case either
238; (perhaps a little slower, but shouldn't be noticeable to the user)
239; and results in smaller code size.
240;
241 push bp
242 mov bp,sp
[392]243 ; Fall to DetectPrint_FormatCSSIfromParamsInSSBP
[386]244
245;--------------------------------------------------------------------
246; DetectPrint_FormatCSSIfromParamsInSSBP
247; Parameters:
248; CS:SI: Ptr to string to format
249; BP: SP before pushing parameters
250; Returns:
251; BP: Popped from stack
252; CF: Set since menu event was handled successfully
253; Corrupts registers:
254; AX, DI
255;--------------------------------------------------------------------
256DetectPrint_FormatCSSIfromParamsInSSBP:
257 CALL_DISPLAY_LIBRARY FormatNullTerminatedStringFromCSSI
258 stc ; Successful return from menu event
259 pop bp
260 ret
Note: See TracBrowser for help on using the repository browser.