Changeset 233 in xtideuniversalbios for trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectPrint.asm
- Timestamp:
- Feb 4, 2012, 6:21:22 PM (12 years ago)
- google:author:
- gregli@hotmail.com
- File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectPrint.asm
r203 r233 30 30 ; DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP 31 31 ; Parameters: 32 ; CS: AX: Ptr to "Master" or "Slave" string32 ; CS:CX: Ptr to "Master" or "Slave" string 33 33 ; CS:BP: Ptr to IDEVARS 34 34 ; SI: Ptr to template string … … 39 39 ;-------------------------------------------------------------------- 40 40 DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP: 41 push bp 42 mov di, [cs:bp+IDEVARS.wPort] 43 %ifdef MODULE_SERIAL 44 mov cx, [cs:bp+IDEVARS.wSerialPackedPrintBaud] 45 %endif 41 42 mov ax, [cs:bp+IDEVARS.wPort] ; for IDE: AX=port address, DH=.bDevice 43 mov dx, [cs:bp+IDEVARS.bDevice-1] ; for Serial: AL=port address>>2, AH=baud rate 44 ; DL=COM number character, DH=.bDevice 45 46 push bp ; setup stack for call to 47 mov bp, sp ; BootMenuPrint_FormatCSSIfromParamsInSSBP 48 49 push cx ; Push "Master" or "Slave" 46 50 47 mov bp, sp 51 mov cl, (g_szDetectPort-$$) & 0xff ; Setup print string for standard IDE 52 ; Note that we modify only the low order bits of CX a lot here, 53 ; saving code space rather than reloading CX completely. 54 ; This optimization requires that all the g_szDetect* strings are 55 ; on the same 256 byte page, which is checked in strings.asm. 48 56 49 push ax ; Push "Master" or "Slave" 57 cmp dx, DEVICE_SERIAL_PORT << 8 ; Check if this is a serial device, 58 ; And also check if DL is zero, check with the jz below 59 ; This optimization requires that DEVICE_SERIAL_PORT be 60 ; the highest value in the DEVICE_* series, ensuring that 61 ; anything less in the high order bits is a different device. 62 63 jl .pushAndPrint ; CX = string to print, AX = port address, DX won't be used 64 65 mov cl, (g_szDetectCOM-$$) & 0xff ; Setup print string for COM ports 66 push cx ; And push now. We use the fact that format strings can contain 67 ; themselves format strings. 68 69 push dx ; Push COM number character 70 71 mov cl, (g_szDetectCOMAuto-$$) & 0xff ; Setup secondary print string for "Auto" 50 72 51 push di ; Push Port address or COM port number 73 jz .pushAndPrint ; CX = string to print, AX and DX won't be used 74 75 mov cl, (g_szDetectCOMLarge-$$) & 0xff ; Setup secondary print string for "COMn/xx.yK" 52 76 53 %ifdef MODULE_SERIAL 54 ; 55 ; Print baud rate from .wSerialPackedPrintBaud, in two parts - %u and then %c 56 ; 57 mov ax,cx ; Unpack baud rate number 58 and ax,DEVICE_SERIAL_PRINTBAUD_NUMBERMASK 59 push ax 77 mov al,ah ; baud rate divisor to AL 78 cbw ; clear AH, AL will always be less than 128 79 xchg si,ax ; move AX to SI for divide 80 mov ax,1152 ; baud rate to displa is 115200/divisor, the "00" is handled 81 ; in the print strings 82 xor dx,dx ; clear top 16-bits of dividend 83 div si ; and divide... Now AX = baud rate/100, DX = 0 (always a clean divide) 84 85 mov si,10 ; Now separate the whole portion from the fractional for "K" display 86 div si ; and divide... Now AX = baud rate/1000, DX = low order digit 87 88 cmp ax,si ; <= 10: "2400", "9600", etc.; >10: "19.2K", "38.4K", etc. 89 jae .pushAndPrint 60 90 61 mov al,ch ; Unpack baud rate postfix ('0' or 'K') 62 eSHR_IM al,2 ; also effectively masks off the postfix 63 add al,DEVICE_SERIAL_PRINTBAUD_POSTCHARADD 64 push ax 65 %endif 66 91 mov cl, (g_szDetectCOMSmall-$$) & 0xff ; Setup secondary print string for "COMn/XXy00" 92 93 .pushAndPrint: 94 push cx ; Push print string 95 push ax ; Push high order digits, or port address, or N/A 96 push dx ; Push low order digit, or N/A 97 98 mov si, g_szDetectOuter ; Finally load SI with wrapper string "IDE %s at %s: " 99 67 100 jmp short DetectPrint_BootMenuPrint_FormatCSSIfromParamsInSSBP_Relay 68 101 … … 92 125 93 126 127
Note: See TracChangeset
for help on using the changeset viewer.