Changeset 592 in xtideuniversalbios for trunk

Timestamp:

Jun 25, 2018, 10:29:27 PM (7 years ago)

Author:

Krister Nordvall

Message:

Changes:

• The problem with NASM in the previous revision (r591) has been fixed.
• The colors used by the boot menu and hotkey bar can now be customized by selecting one of a number of pre-defined color themes. Suggestions for additional themes are more than welcome!
• Large builds are now 10 KB. Small builds are still 8 KB with the exception of the Tiny build which is now 4 KB. In other words, builds are now as small as possible to make it easier to combine them with other BIOSes.
• Added code to the library to improve drive error handling. XTIDECFG can now handle "Drive Not Ready" errors.
• Fixed a couple of potential bugs in AtaID.asm (AtaID_GetMaxPioModeToAXandMinCycleTimeToCX); 1) ATA1.bPioMode was treated as a WORD variable. 2) ATA2.bPIOSupp was assumed to be non-zero which would result in PIO mode 3 being returned if the assumption was wrong.
• Made the same changes in the equivalent function used by BIOSDRVS (DisplayPioModeInformationUsingAtaInfoFromDSBX in AtaInfo.asm).
• Fixed a bug from r587 in PDC20x30.asm in PDC20x30_GetMaxPioModeToALandMinPioCycleTimeToBX.
• Fixed a bug from r523 in XTIDECFG where Auto Configure would only set the IRQ on one IDE interface on AT-builds.
• XTIDECFG will now restore the default settings for the "Serial port virtual device" when reselecting it in the list of device types. This makes it behave consistently for all device types.
• The eAAM macro is now used regardless if USE_UNDOC_INTEL is defined or not because it is apparently supported on all processors including the NEC V20/V30 CPUs.
• Renamed the EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS define to EXCLUDE_FROM_XUB.
• Added a define to exclude unused library code from BIOSDRVS (EXCLUDE_FROM_BIOSDRVS). This makes it a lot smaller than in previous revisions.
• All unnecessary CLD-instructions are now under a new define 'CLD_NEEDED' which is only enabled for the BIOS. It is disabled for XTIDECFG and BIOSDRVS but can be enabled if needed by adding this define to the respective makefile. This change was made because these unnecessary instructions are wasteful and should never be needed. In fact, they only serve to hide bugs (in other peoples code) which I strongly believe should be avoided. I recommend people making their own BIOSes from source to not use this define as it's extremely unlikely to be needed.
• Updated the copyright info in SerDrive and changed an URL to point to the new site.
• Updated the copyright info and version number in BIOSDRVS.
• Updated the copyright info in XTIDECFG.
• Optimizations in general.

Location:

trunk

Files:

• Assembly_Library/Inc/BiosFunctions.inc (modified) (1 diff)
• Assembly_Library/Inc/Debug.inc (modified) (3 diffs)
• Assembly_Library/Inc/Display.inc (modified) (4 diffs)
• Assembly_Library/Inc/DosFunctions.inc (modified) (2 diffs)
• Assembly_Library/Inc/Emulate.inc (modified) (16 diffs)
• Assembly_Library/Inc/Macros.inc (modified) (1 diff)
• Assembly_Library/Inc/Math.inc (modified) (10 diffs)
• Assembly_Library/Inc/Menu.inc (modified) (1 diff)
• Assembly_Library/Src/AssemblyLibrary.asm (modified) (3 diffs)
• Assembly_Library/Src/Display/CgaSnow.asm (modified) (1 diff)
• Assembly_Library/Src/Display/Display.asm (modified) (5 diffs)
• Assembly_Library/Src/Display/DisplayContext.asm (modified) (13 diffs)
• Assembly_Library/Src/Display/DisplayCursor.asm (modified) (2 diffs)
• Assembly_Library/Src/Display/DisplayFormat.asm (modified) (7 diffs)
• Assembly_Library/Src/Display/DisplayPage.asm (modified) (3 diffs)
• Assembly_Library/Src/Display/DisplayPrint.asm (modified) (5 diffs)
• Assembly_Library/Src/File/Directory.asm (modified) (2 diffs)
• Assembly_Library/Src/File/DosCritical.asm (modified) (5 diffs)
• Assembly_Library/Src/File/Drive.asm (modified) (2 diffs)
• Assembly_Library/Src/File/FileIO.asm (modified) (2 diffs)
• Assembly_Library/Src/Keyboard/Keyboard.asm (modified) (9 diffs)
• Assembly_Library/Src/LibSizeCheck.asm (modified) (1 diff)
• Assembly_Library/Src/Menu/Dialog/DialogFile.asm (modified) (5 diffs)
• Assembly_Library/Src/Menu/MenuAttributes.asm (modified) (2 diffs)
• Assembly_Library/Src/Menu/MenuBorders.asm (modified) (1 diff)
• Assembly_Library/Src/Menu/MenuInit.asm (modified) (9 diffs)
• Assembly_Library/Src/Menu/MenuLocation.asm (modified) (1 diff)
• Assembly_Library/Src/Menu/MenuText.asm (modified) (1 diff)
• Assembly_Library/Src/Serial/SerialServer.asm (modified) (1 diff)
• Assembly_Library/Src/String/Char.asm (modified) (11 diffs)
• Assembly_Library/Src/Time/TimerTicks.asm (modified) (6 diffs)
• Assembly_Library/Src/Util/Bit.asm (modified) (4 diffs)
• Assembly_Library/Src/Util/Math.asm (modified) (3 diffs)
• Assembly_Library/Src/Util/Memory.asm (modified) (6 diffs)
• Assembly_Library/Src/Util/Reboot.asm (modified) (1 diff)
• Assembly_Library/Src/Util/Registers.asm (modified) (2 diffs)
• Assembly_Library/Src/Util/Size.asm (modified) (2 diffs)
• Assembly_Library/Src/Util/Sort.asm (modified) (2 diffs)
• BIOS_Drive_Information_Tool/Src/AtaInfo.asm (modified) (6 diffs)
• BIOS_Drive_Information_Tool/Src/Print.asm (modified) (3 diffs)
• BIOS_Drive_Information_Tool/Src/Strings.asm (modified) (2 diffs)
• BIOS_Drive_Information_Tool/makefile (modified) (3 diffs)
• Serial_Server/library/Checksum.cpp (modified) (1 diff)
• Serial_Server/library/Image.cpp (modified) (1 diff)
• Serial_Server/win32/Win32.cpp (modified) (2 diffs)
• XTIDE_Universal_BIOS/Inc/BootVars.inc (modified) (3 diffs)
• XTIDE_Universal_BIOS/Inc/IdeIO.inc (modified) (1 diff)
• XTIDE_Universal_BIOS/Inc/RomVars.inc (modified) (2 diffs)
• XTIDE_Universal_BIOS/Inc/Version.inc (modified) (2 diffs)
• XTIDE_Universal_BIOS/Src/Device/IDE/IdeCommand.asm (modified) (1 diff)
• XTIDE_Universal_BIOS/Src/Device/IDE/IdeDPT.asm (modified) (1 diff)
• XTIDE_Universal_BIOS/Src/Device/IDE/JrIdeTransfer.asm (modified) (1 diff)
• XTIDE_Universal_BIOS/Src/Handlers/Int13h.asm (modified) (2 diffs)
• XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH0h_HReset.asm (modified) (2 diffs)
• XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH1Eh_XTCF.asm (modified) (1 diff)
• XTIDE_Universal_BIOS/Src/Handlers/Int13h/EBIOS/AH41h_CheckIfExtensionsPresent.asm (modified) (3 diffs)
• XTIDE_Universal_BIOS/Src/Handlers/Int13h/Tools/Address.asm (modified) (1 diff)
• XTIDE_Universal_BIOS/Src/Handlers/Int19h.asm (modified) (1 diff)
• XTIDE_Universal_BIOS/Src/Initialization/AdvancedAta/AdvAtaInit.asm (modified) (1 diff)
• XTIDE_Universal_BIOS/Src/Initialization/AdvancedAta/PDC20x30.asm (modified) (4 diffs)
• XTIDE_Universal_BIOS/Src/Initialization/AdvancedAta/Vision.asm (modified) (2 diffs)
• XTIDE_Universal_BIOS/Src/Initialization/AtaID.asm (modified) (7 diffs)
• XTIDE_Universal_BIOS/Src/Initialization/DetectPrint.asm (modified) (1 diff)
• XTIDE_Universal_BIOS/Src/Initialization/FloppyDrive.asm (modified) (1 diff)
• XTIDE_Universal_BIOS/Src/Initialization/Interrupts.asm (modified) (1 diff)
• XTIDE_Universal_BIOS/Src/Main.asm (modified) (7 diffs)
• XTIDE_Universal_BIOS/Src/Menus/BootMenu/BootMenuEvent.asm (modified) (1 diff)
• XTIDE_Universal_BIOS/Src/Menus/BootMenu/BootMenuPrint.asm (modified) (1 diff)
• XTIDE_Universal_BIOS/Src/Menus/BootMenu/BootMenuPrintCfg.asm (modified) (1 diff)
• XTIDE_Universal_BIOS/Src/Menus/HotkeyBar.asm (modified) (1 diff)
• XTIDE_Universal_BIOS/Src/VariablesAndDPTs/AtaGeometry.asm (modified) (5 diffs)
• XTIDE_Universal_BIOS/Src/VariablesAndDPTs/DrvDetectInfo.asm (modified) (3 diffs)
• XTIDE_Universal_BIOS/Src/VariablesAndDPTs/RamVars.asm (modified) (3 diffs)
• XTIDE_Universal_BIOS/makefile (modified) (7 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Inc/Variables.inc (modified) (2 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/AutoConfigure.asm (modified) (6 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/BiosFile.asm (modified) (2 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/Buffers.asm (modified) (13 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/Dialogs.asm (modified) (5 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/EEPROM.asm (modified) (9 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/Flash.asm (modified) (2 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/IdeAutodetect.asm (modified) (6 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/Main.asm (modified) (1 diff)
• XTIDE_Universal_BIOS_Configurator_v2/Src/MenuEvents.asm (modified) (6 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/Menuitem.asm (modified) (10 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/MenuitemPrint.asm (modified) (1 diff)
• XTIDE_Universal_BIOS_Configurator_v2/Src/Menupages/BootMenuSettingsMenu.asm (modified) (8 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/Menupages/ConfigurationMenu.asm (modified) (12 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/Menupages/FlashMenu.asm (modified) (4 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/Menupages/IdeControllerMenu.asm (modified) (18 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/Menupages/MainMenu.asm (modified) (6 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/Menupages/MasterSlaveMenu.asm (modified) (10 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/Src/Strings.asm (modified) (7 diffs)
• XTIDE_Universal_BIOS_Configurator_v2/makefile (modified) (2 diffs)

trunk/Assembly_Library/Inc/BiosFunctions.inc

@@ -6 +6 @@
 ; BIOS interrupts
 BIOS_VIDEO_INTERRUPT_10h        EQU     10h
+BIOS_EQUIPMENT_INTERRUPT_11h    EQU     11h
 BIOS_DISK_INTERRUPT_13h         EQU     13h
 BIOS_SYSTEM_INTERRUPT_15h       EQU     15h

trunk/Assembly_Library/Inc/Debug.inc

@@ -24 +24 @@
     mov     bl, %2
     CALL_DISPLAY_LIBRARY PrintWordFromAXWithBaseInBL
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     call    Keyboard_RemoveAllKeystrokesFromBuffer
 %endif
@@ -52 +52 @@
     mov     al, %1
     CALL_DISPLAY_LIBRARY PrintCharacterFromAL
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     call    Keyboard_RemoveAllKeystrokesFromBuffer
 %endif
@@ -95 +95 @@
 %macro WAIT_ANY_KEY_TO_CONTINUE 0
     push    ax
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     call    Keyboard_RemoveAllKeystrokesFromBuffer
 %endif

trunk/Assembly_Library/Inc/Display.inc

@@ -61 +61 @@
     .InitializeDisplayContext                       resb    2
 
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     .SetCharacterPointerFromBXAX                    resb    2
 %endif
@@ -74 +74 @@
     .SynchronizeDisplayContextToHardware            resb    2
 
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     .GetCharacterPointerToBXAX                      resb    2
 %endif
@@ -81 +81 @@
 
     .FormatNullTerminatedStringFromCSSI             resb    2
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     .PrintSignedWordFromAXWithBaseInBL              resb    2
 %endif
     .PrintWordFromAXWithBaseInBL                    resb    2
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS OR EXCLUDE_FROM_XTIDECFG
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_XTIDECFG
     .PrintQWordFromSSBPwithBaseInBX                 resb    2
 %endif
@@ -94 +94 @@
     .PrintCharacterFromAL                           resb    2
     .PrintNewlineCharacters                         resb    2
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     .ClearAreaWithHeightInAHandWidthInAL            resb    2
 %endif

trunk/Assembly_Library/Inc/DosFunctions.inc

@@ -6 +6 @@
 ; DOS interrupts
 DOS_INTERRUPT_21h                                   EQU     21h
+DOS_CTRL_C_CTRL_BREAK_HANDLER_23h                   EQU     23h
 DOS_CRITICAL_ERROR_HANDLER_24h                      EQU     24h
 DOS_TSR_MULTIPLEX_INTERRUPT_2Fh                     EQU     2Fh
@@ -31 +32 @@
 FIND_FIRST_MATCHING_FILE                            EQU     4Eh     ; DOS 2+
 FIND_NEXT_MATCHING_FILE                             EQU     4Fh     ; DOS 2+
+GET_EXTENDED_ERROR_INFORMATION                      EQU     59h     ; DOS 3.0+
 
 ; DOS errors

trunk/Assembly_Library/Inc/Emulate.inc

@@ -60 +60 @@
 
 ;--------------------------------------------------------------------
+; Find String In String
+;
+; FSIS
+;   Parameters:
+;       %1:     String to search for (case-insensitive)
+;       %2:     String to search in
+;   Returns:
+;   strpos:     Position of %1 in %2 if found, 0 if not found
+;--------------------------------------------------------------------
+%macro FSIS 2.nolist
+%defstr s1 %1
+%defstr s2 %2
+%strlen sl1 s1
+%strlen sl2 s2
+%assign strpos 0
+    %if sl1 <= sl2
+        %assign strpos sl2 - sl1 + 1
+        %rep strpos
+            %substr %%ss s2 strpos, sl1
+            %ifidni %%ss, s1
+                %exitrep
+            %else
+                %assign strpos strpos - 1
+            %endif
+        %endrep
+    %endif
+%endmacro
+
+
+;--------------------------------------------------------------------
 ; The undocumented instruction SALC (Set AL According to CF).
 ; Available on all Intel processors and truly compatible clones.
@@ -108 +138 @@
 ;--------------------------------------------------------------------
 ; The AAM instruction (ASCII Adjust after Multiplication).
-; Available on all Intel processors and truly compatible clones.
-; Does not work on the NEC V20/V30 or Sony CXQ70108 processors
-; unless %1 is 10 (0Ah).
 ;
 ; eAAM
@@ -152 +179 @@
 %macro eBSF 2
 %ifndef USE_386
-    push    cx
     cmp     WORD %2, BYTE 0     ; Source operand is zero?
     je      SHORT %%Return      ;  If so, return with ZF set
 
     ; Set destination to zero and load mask for bit 0
+    push    cx
     xor     %1, %1
     mov     cx, 1
@@ -163 +190 @@
 %%BitLoop:
     test    %2, cx              ; Bit set?
-    jnz     SHORT %%Return      ;  If so, return with ZF cleared
+    jnz     SHORT %%PopAndReturn;  If so, return with ZF cleared
     shl     cx, 1               ; Prepare to test next bit
     inc     %1                  ; Increment bit index
     jmp     SHORT %%BitLoop     ; Loop until bit found
-%%Return:
+%%PopAndReturn:
     pop     cx
+%%Return:
 ;-----------------------------------
 %else
@@ -193 +221 @@
 %macro eBSR 2
 %ifndef USE_386
-    push    cx
     cmp     WORD %2, BYTE 0     ; Source operand is zero?
     je      SHORT %%Return      ;  If so, return with ZF set
 
     ; Load mask for highest order bit
+    push    cx
     mov     cx, 1<<15
     mov     %1, 15
@@ -204 +232 @@
 %%BitLoop:
     test    %2, cx              ; Bit set?
-    jnz     SHORT %%Return      ;  If so, return with ZF cleared
+    jnz     SHORT %%PopAndReturn;  If so, return with ZF cleared
     shr     cx, 1               ; Prepare to test next bit
     dec     %1                  ; Decrement bit index
     jmp     SHORT %%BitLoop     ; Loop until bit found
-%%Return:
+%%PopAndReturn:
     pop     cx
+%%Return:
 ;-----------------------------------
 %else
@@ -260 +289 @@
 
 %macro eCMOVE 2
-    eCMOVZ %1, %2
+    eCMOVZ  %1, %2
 %endmacro
 
 %macro eCMOVNE 2
-    eCMOVNZ %1, %2
+    eCMOVNZ %1, %2
 %endmacro
 
 %macro eCMOVB 2
-    jnb     SHORT %%Return
-    mov     %1, %2
-%%Return:
+    eCMOVC  %1, %2
 %endmacro
 
@@ -289 +316 @@
 ; Conditional Set.
 ;
-; eCSETcc
+; eSETcc
 ;   Parameters:
 ;       %1:     Destination data
@@ -297 +324 @@
 ;       Flags
 ;--------------------------------------------------------------------
-%macro eCSETZ 1
+%macro eSETZ 1
     mov     %1, 0           ; Clear while preserving flags
     jnz     SHORT %%Return  ; Nothing to set
@@ -304 +331 @@
 %endmacro
 
-%macro eCSETNZ 1
+%macro eSETNZ 1
     mov     %1, 0           ; Clear while preserving flags
     jz      SHORT %%Return  ; Nothing to set
@@ -339 +366 @@
         xor     dh, dh
     %else   ; SI, DI, BP (all may be used in effective address)
-        push    ax
-        mov     al, %2
-        xor     ah, ah
-        xchg    ax, %1
-        pop     ax
+        FSIS    %1, %2
+        %if strpos
+            push    ax
+            mov     al, %2
+            xor     ah, ah
+            xchg    %1, ax
+            pop     ax
+        %else
+            xchg    %1, ax
+            mov     al, %2
+            xor     ah, ah
+            xchg    %1, ax
+        %endif
     %endif
 ;-----------------------------------
@@ -484 +519 @@
 ; eSEG_STR
 ;   Parameters:
-;       %1:     REP/REPNE or REPE prefix
+;       %1:     REP/REPE/REPZ or REPNE/REPNZ prefix
 ;       %2:     Source segment override (destination is always ES)
 ;       %3:     String instruction
@@ -491 +526 @@
 ;       FLAGS for cmps and scas only
 ;   Corrupts registers:
-;       Nothing
+;       FLAGS
 ;--------------------------------------------------------------------
 %macro eSEG_STR 3
@@ -499 +534 @@
         %2                      ; SEG is the prefix that won't be lost
         %3                      ; String instruction
+FSIS    cmps, %3
+%ifn strpos
+    FSIS    scas, %3
+%endif
+%if strpos                      ; Must preserve FLAGS
         jcxz    %%End           ; Jump to end if no repeats left (preserves FLAGS)
         jmp     SHORT %%Loop    ; Loop while repeats left
     %%End:
+%else                           ; No need to preserve FLAGS
+        inc     cx
+        loop    %%Loop
+%endif
 %else   ; No bug on V20/V30 and later, don't know about 188/186
     %2
@@ -556 +600 @@
 %ifdef USE_386
     %if %2 = 1
-        add     %1, %1  ; Same size but faster on 386 and 486. Fails if %1 is a memory operand.
+        FSIS    ], %1
+        %if strpos
+            eSHIFT_IM   %1, %2, shl
+        %else
+            add     %1, %1  ; Same size but faster on 386 and 486.
+        %endif
     %else
         eSHIFT_IM   %1, %2, shl
@@ -582 +631 @@
 %ifdef USE_386
     %if %2 = 1
-        adc     %1, %1  ; Same size but faster on 386 and 486. Fails if %1 is a memory operand.
+        FSIS    ], %1
+        %if strpos
+            eSHIFT_IM   %1, %2, rcl
+        %else
+            adc     %1, %1  ; Same size but faster on 386 and 486.
+        %endif
     %else
         eSHIFT_IM   %1, %2, rcl

trunk/Assembly_Library/Inc/Macros.inc

@@ -18 +18 @@
 ;       %1
 ;--------------------------------------------------------------------
-%macro SKIP2B 1
+%macro SKIP2B 1.nolist
     %ifidni     %1, f
         db  03Dh                    ; Opcode byte for CMP AX, <immed>

trunk/Assembly_Library/Inc/Math.inc

@@ -23 +23 @@
     jb      %%Return            ;  If so, return
     mov     %1, %2              ; Copy %2 to %1
-ALIGN JUMP_ALIGN
 %%Return:
 %endmacro
@@ -31 +30 @@
     jl      %%Return            ;  If so, return
     mov     %1, %2              ; Copy %2 to %1
-ALIGN JUMP_ALIGN
 %%Return:
 %endmacro
@@ -51 +49 @@
     ja      %%Return            ;  If so, return
     mov     %1, %2              ; Copy %2 to %1
-ALIGN JUMP_ALIGN
 %%Return:
 %endmacro
@@ -59 +56 @@
     jg      %%Return            ;  If so, return
     mov     %1, %2              ; Copy %2 to %1
-ALIGN JUMP_ALIGN
 %%Return:
 %endmacro
@@ -67 +63 @@
 ; SHL_DXAX
 ;   Parameters:
-;       %1:     Number of bits to shift
+;       %1:     Number of bits to shift. Can be (in preferred order) CX, CL or an immediate value.
 ;   Returns:
 ;       DX:AX   Shifted value
@@ -74 +70 @@
 ;--------------------------------------------------------------------
 %macro SHL_DXAX 1
+%ifdef USE_386
     %ifnidni %1, cx
+        ; %1 is CL or an immediate
+        shld    dx, ax, %1
+        shl     ax, %1
+    %else
+        ; %1 is CX
+        shld    dx, ax, cl
+        shl     ax, cl
+    %endif
+%else
+    %ifidni %1, cl
+        ; %1 is CL
+        xor     ch, ch
+    %elifnidni %1, cx
+        ; %1 is an immediate
         mov     cx, %1
     %endif
@@ -82 +93 @@
     eRCL_IM dx, 1
     loop    .ShiftNextBit
+%endif
 %endmacro
 
@@ -88 +100 @@
 ; SHR_DXAX
 ;   Parameters:
-;       %1:     Number of bits to shift
+;       %1:     Number of bits to shift. Can be (in preferred order) CX, CL or an immediate value.
 ;   Returns:
 ;       DX:AX   Shifted value
@@ -95 +107 @@
 ;--------------------------------------------------------------------
 %macro SHR_DXAX 1
+%ifdef USE_386
     %ifnidni %1, cx
+        ; %1 is CL or an immediate
+        shrd    ax, dx, %1
+        shr     dx, %1
+    %else
+        ; %1 is CX
+        shrd    ax, dx, cl
+        shr     dx, cl
+    %endif
+%else
+    %ifidni %1, cl
+        ; %1 is CL
+        xor     ch, ch
+    %elifnidni %1, cx
+        ; %1 is an immediate
         mov     cx, %1
     %endif
@@ -103 +130 @@
     rcr     ax, 1
     loop    .ShiftNextBit
+%endif
 %endmacro
 

trunk/Assembly_Library/Inc/Menu.inc

@@ -159 +159 @@
 SCROLL_THUMB_CHARACTER              EQU     BLOCK_FULL_FOREGROUND
 
-NO_ITEM_SELECTED                    EQU     -1
+;NO_ITEM_SELECTED                   EQU     -1
 NO_ITEM_HIGHLIGHTED                 EQU     -1
 NO_TIMEOUT_USED                     EQU     0

trunk/Assembly_Library/Src/AssemblyLibrary.asm

@@ -90 +90 @@
   %endif
     %include "Char.asm"
-    %ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+    %ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
         %include "String.asm"
         %include "StringProcess.asm"
@@ -106 +106 @@
 
 %ifdef INCLUDE_TIME_LIBRARY
-    %ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+    %ifndef EXCLUDE_FROM_XUB
         %include "Delay.asm"
         %ifndef EXCLUDE_FROM_XTIDECFG
@@ -119 +119 @@
     %define UTIL_SIZE_JUMP_ALIGN 1
   %endif
-    %ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
-        %include "Bit.asm"
+    %ifndef EXCLUDE_FROM_XUB
+        %ifndef EXCLUDE_FROM_BIOSDRVS
+            %include "Bit.asm"
+        %endif
+        %include "Math.asm"
     %endif
-    %include "Math.asm"
-    %include "Registers.asm"
-    %include "Reboot.asm"
-    %include "Memory.asm"
+    %ifndef EXCLUDE_FROM_BIOSDRVS
+        %include "Registers.asm"
+        %include "Reboot.asm"
+        %include "Memory.asm"
+    %endif
     %include "Size.asm"
-    %ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+    %ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
         %include "Sort.asm"
     %endif

trunk/Assembly_Library/Src/Display/CgaSnow.asm

@@ -106 +106 @@
 ;       AX, CX, DX
 ;--------------------------------------------------------------------
-%ifdef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifdef EXCLUDE_FROM_XUB
     %ifdef MODULE_STRINGS_COMPRESSED
         %define EXCLUDE

trunk/Assembly_Library/Src/Display/Display.asm

@@ -38 +38 @@
     push    dx
 
+%ifdef CLD_NEEDED
     cld
+%endif
     LOAD_BDA_SEGMENT_TO ds, dx
     mov     dx, di
@@ -76 +78 @@
     %define InitializeDisplayContext                        DisplayContext_Initialize
 
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     %define SetCharacterPointerFromBXAX                     DisplayContext_SetCharacterPointerFromBXAX
 %endif
@@ -89 +91 @@
     %define SynchronizeDisplayContextToHardware             DisplayContext_SynchronizeToHardware
 
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     %define GetCharacterPointerToBXAX                       DisplayContext_GetCharacterPointerToBXAX
 %endif
@@ -96 +98 @@
 
     %define FormatNullTerminatedStringFromCSSI              Display_FormatNullTerminatedStringFromCSSI
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     %define PrintSignedWordFromAXWithBaseInBL               DisplayPrint_SignedWordFromAXWithBaseInBL
 %endif
     %define PrintWordFromAXWithBaseInBL                     DisplayPrint_WordFromAXWithBaseInBL
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS OR EXCLUDE_FROM_XTIDECFG
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_XTIDECFG
     %define PrintQWordFromSSBPwithBaseInBX                  DisplayPrint_QWordFromSSBPwithBaseInBX
 %endif
@@ -109 +111 @@
     %define PrintCharacterFromAL                            DisplayPrint_CharacterFromAL
     %define PrintNewlineCharacters                          DisplayPrint_Newline
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     %define ClearAreaWithHeightInAHandWidthInAL             DisplayPrint_ClearAreaWithHeightInAHandWidthInAL
 %endif

trunk/Assembly_Library/Src/Display/DisplayContext.asm

@@ -110 +110 @@
 ;       AX, DI
 ;--------------------------------------------------------------------
-%ifdef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifdef EXCLUDE_FROM_XUB
     %ifndef MODULE_BOOT_MENU
         %define EXCLUDE
@@ -116 +116 @@
 %endif
 
-%ifndef EXCLUDE
+%ifndef EXCLUDE OR EXCLUDE_FROM_BIOSDRVS
 ALIGN DISPLAY_JUMP_ALIGN
 DisplayContext_Push:
@@ -170 +170 @@
     mov     ds, di                  ; Restore DS
     ret
-%endif ; EXCLUDE
+%endif ; EXCLUDE OR EXCLUDE_FROM_BIOSDRVS
 %undef EXCLUDE
 
@@ -184 +184 @@
 ;       AX, DI
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN DISPLAY_JUMP_ALIGN
 DisplayContext_PrepareOffScreenBufferInESBXwithLengthInCX:
@@ -202 +202 @@
     pop     ds
     ret
-%endif ; EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%endif ; EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 
 
@@ -215 +215 @@
 ;       AX
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN DISPLAY_JUMP_ALIGN
 DisplayContext_SetCharacterPointerFromBXAX:
@@ -235 +235 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN DISPLAY_JUMP_ALIGN
 DisplayContext_GetCharacterPointerToBXAX:
@@ -244 +244 @@
 
 
-%ifdef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifdef EXCLUDE_FROM_XUB
     %ifndef MODULE_BOOT_MENU
         %define EXCLUDE
@@ -282 +282 @@
 ;--------------------------------------------------------------------
 %ifndef EXCLUDE ; 2 of 3
+%ifndef EXCLUDE_FROM_BIOSDRVS
 ALIGN DISPLAY_JUMP_ALIGN
 DisplayContext_SetCharacterAttributeFromAL:
@@ -287 +288 @@
     ret
 %endif
+%endif
 
 
@@ -300 +302 @@
 ;--------------------------------------------------------------------
 %ifndef EXCLUDE ; 3 of 3
+%ifndef EXCLUDE_FROM_BIOSDRVS
 ALIGN DISPLAY_JUMP_ALIGN
 DisplayContext_SetCharacterOutputParameterFromAX:
@@ -305 +308 @@
     ret
 %endif
+%endif
 
 %undef EXCLUDE
@@ -318 +322 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS OR EXCLUDE_FROM_XTIDECFG
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_XTIDECFG OR EXCLUDE_FROM_BIOSDRVS
 ALIGN DISPLAY_JUMP_ALIGN
 DisplayContext_GetCharacterOutputParameterToDX:

trunk/Assembly_Library/Src/Display/DisplayCursor.asm

@@ -48 +48 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifdef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifdef EXCLUDE_FROM_XUB
     %ifndef MODULE_BOOT_MENU
         %define EXCLUDE
@@ -54 +54 @@
 %endif
 
-%ifndef EXCLUDE
+%ifndef EXCLUDE OR EXCLUDE_FROM_BIOSDRVS
 ALIGN DISPLAY_JUMP_ALIGN
 DisplayCursor_SetShapeFromAX:

trunk/Assembly_Library/Src/Display/DisplayFormat.asm

@@ -142 +142 @@
 
 .rgcFormatCharToLookupIndex:
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     db      "aIAduxsSctz-+%"
 %else
@@ -150 +150 @@
 ALIGN WORD_ALIGN
 .rgfnFormatSpecifierParser:
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     dw      a_FormatAttributeForNextCharacter
 %endif
     dw      I_FormatDashForZero
     dw      A_FormatAttributeForRemainingString
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     dw      d_FormatSignedDecimalWord
 %endif
@@ -161 +161 @@
     dw      x_FormatHexadecimalWord
     dw      s_FormatStringFromSegmentCS
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     dw      S_FormatStringFromFarPointer
 %endif
     dw      c_FormatCharacter
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     dw      t_FormatRepeatCharacter
 %endif
     dw      z_FormatStringFromSegmentZero
     dw      PrepareToPrependParameterWithSpaces
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     dw      PrepareToAppendSpacesAfterParameter
     dw      percent_FormatPercent
@@ -308 +308 @@
 ;       AX, BX, DX
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
 ALIGN DISPLAY_JUMP_ALIGN
 a_FormatAttributeForNextCharacter:
@@ -330 +330 @@
     ret
 
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
 ALIGN DISPLAY_JUMP_ALIGN
 d_FormatSignedDecimalWord:
@@ -391 +391 @@
     ret
 
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
 ALIGN DISPLAY_JUMP_ALIGN
 S_FormatStringFromFarPointer:
@@ -408 +408 @@
     jmp     DisplayPrint_CharacterFromAL
 
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
 ALIGN DISPLAY_JUMP_ALIGN
 t_FormatRepeatCharacter:

trunk/Assembly_Library/Src/Display/DisplayPage.asm

@@ -31 +31 @@
 ;       AX, DX
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS OR EXCLUDE_FROM_XTIDECFG
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_XTIDECFG OR EXCLUDE_FROM_BIOSDRVS
 ALIGN DISPLAY_JUMP_ALIGN
 DisplayPage_SetFromAL:
@@ -41 +41 @@
 
 
-%ifdef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifdef EXCLUDE_FROM_XUB
     %define EXCLUDE
     %ifdef MODULE_HOTKEYS OR MODULE_BOOT_MENU
@@ -48 +48 @@
 %endif
 
-%ifndef EXCLUDE
+%ifndef EXCLUDE OR EXCLUDE_FROM_BIOSDRVS
 ;--------------------------------------------------------------------
 ; DisplayPage_GetColumnsToALandRowsToAH

trunk/Assembly_Library/Src/Display/DisplayPrint.asm

@@ -94 +94 @@
 ;       AX, BH, DX
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
 ALIGN DISPLAY_JUMP_ALIGN
 DisplayPrint_SignedWordFromAXWithBaseInBL:
@@ -163 +163 @@
 ;       AX, DX, [SS:BP]
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS OR EXCLUDE_FROM_XTIDECFG
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_XTIDECFG
 ALIGN DISPLAY_JUMP_ALIGN
 DisplayPrint_QWordFromSSBPwithBaseInBX:
@@ -194 +194 @@
 ;       AX, DX
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN DISPLAY_JUMP_ALIGN
 DisplayPrint_CharacterBufferFromBXSIwithLengthInCX:
@@ -261 +261 @@
 ;       AX, DX
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN DISPLAY_JUMP_ALIGN
 DisplayPrint_ClearAreaWithHeightInAHandWidthInAL:
@@ -292 +292 @@
 %endif
 
-%ifdef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifdef EXCLUDE_FROM_XUB
     %define EXCLUDE
     %ifndef MODULE_STRINGS_COMPRESSED

trunk/Assembly_Library/Src/File/Directory.asm

@@ -99 +99 @@
 ;       Nothing
 ;--------------------------------------------------------------------
+%ifndef EXCLUDE_FROM_XTIDECFG
 ALIGN JUMP_ALIGN
 Directory_GetMatchCountToAXforSearchStringInDSSIwithAttributesInCX:
@@ -115 +116 @@
     pop     dx
     ret
+%endif
 
 

trunk/Assembly_Library/Src/File/DosCritical.asm

@@ -1 @@
-; File name     :   DosCritical.asm
 ; Project name  :   Assembly Library
-; Created date  :   1.9.2010
-; Last update   :   2.9.2010
-; Author        :   Tomi Tilli
 ; Description   :   DOS Critical Error Handler (24h) replacements.
 
@@ -22 +18 @@
 ;
 
+; Note! Only DOS functions 01h - 0Ch, 30h and 59h can be called from a Critical Error Handler.
 
 ; DOS Critical Error Handler return values
@@ -28 +25 @@
     .retryOperation                             resb    1
     .terminateProgramAsThoughInt21hAH4ChCalled  resb    1
-    .failSystemCallInProgress                   resb    1
+    .failSystemCallInProgress                   resb    1   ; Needs DOS 3.1+
 endstruc
 
@@ -83 +80 @@
 
 ;--------------------------------------------------------------------
+; DosCritical_CustomHandler
+;   Parameters:
+;       Nothing
+;   Returns:
+;       Nothing
+;   Corrupts registers:
+;       Nothing
+;--------------------------------------------------------------------
+ALIGN JUMP_ALIGN
+DosCritical_CustomHandler:
+    add     sp, 6   ; Remove the INT 24h return address and flags from stack
+
+    mov     ah, GET_EXTENDED_ERROR_INFORMATION  ; Requires DOS 3.0+
+    xor     bx, bx
+    int     DOS_INTERRUPT_21h
+    mov     [cs:bLastCriticalError], al
+
+    pop     ax
+    pop     bx
+    pop     cx
+    pop     dx
+    pop     si
+    pop     di
+    pop     bp
+    pop     ds
+    pop     es
+    iret            ; Return from the INT 21h call
+
+bLastCriticalError:     db  0
+
+
+;--------------------------------------------------------------------
 ; DosCritical_HandlerToIgnoreAllErrors
 ;   Parameters:
@@ -95 +124 @@
     mov     al, CRITICAL_ERROR_ACTION.ignoreErrorAndContinueProcessingRequest
     iret
+

trunk/Assembly_Library/Src/File/Drive.asm

@@ -30 +30 @@
 ;       Nothing
 ;--------------------------------------------------------------------
+%ifndef EXCLUDE_FROM_XTIDECFG
 ALIGN JUMP_ALIGN
 Drive_GetNumberOfAvailableDrivesToAX:
@@ -42 +43 @@
     pop     dx
     ret
+%endif
 
 

trunk/Assembly_Library/Src/File/FileIO.asm

@@ -35 +35 @@
 ;       AX, BX
 ;--------------------------------------------------------------------
+%ifndef EXCLUDE_FROM_XTIDECFG
 ALIGN JUMP_ALIGN
 FileIO_CreateWithPathInDSSIandAttributesInCX:
@@ -40 +41 @@
     SKIP2B  bx
     ; Fall to FileIO_OpenWithPathInDSSIandFileAccessInAL
+%endif
 
 ;--------------------------------------------------------------------

trunk/Assembly_Library/Src/Keyboard/Keyboard.asm

@@ -37 +37 @@
 ;       DX
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN KEYBOARD_JUMP_ALIGN
 Keyboard_ReadUserInputtedWordWhilePrinting:
@@ -87 +87 @@
 ;       AX
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN KEYBOARD_JUMP_ALIGN
 Keyboard_ReadUserInputtedStringToESDIWhilePrinting:
@@ -98 +98 @@
     xor     bx, bx                              ; Zero character counter
     dec     cx                                  ; Decrement buffer size for NULL
+%ifdef CLD_NEEDED
     cld
+%endif
 ALIGN KEYBOARD_JUMP_ALIGN
 .GetCharacterFromUser:
@@ -197 +199 @@
     xor     al, al                              ; Set ZF and clear CF
     ret
-%endif ; EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%endif ; EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 
 
@@ -209 +211 @@
 ;       AX
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN KEYBOARD_JUMP_ALIGN
 Keyboard_PrintBackspace:
@@ -230 +232 @@
 ;       AX
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN KEYBOARD_JUMP_ALIGN
 Keyboard_PlayBellForUnwantedKeystroke:
@@ -246 +248 @@
 ;       AX
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN KEYBOARD_JUMP_ALIGN
 Keyboard_PrintInputtedCharacter:
@@ -266 +268 @@
 ;       AX
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS   ; Only used when debugging
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS               ; Only used when debugging
 ALIGN KEYBOARD_JUMP_ALIGN
 Keyboard_RemoveAllKeystrokesFromBuffer:
@@ -289 +291 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifdef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifdef EXCLUDE_FROM_XUB
     %define EXCLUDE
     %ifdef MODULE_HOTKEYS OR MODULE_BOOT_MENU

trunk/Assembly_Library/Src/LibSizeCheck.asm

@@ -20 +20 @@
 
 ; Include .inc files
-%define EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%define EXCLUDE_FROM_XUB
 ;%define INCLUDE_DISPLAY_LIBRARY
 ;%define INCLUDE_FILE_LIBRARY

trunk/Assembly_Library/Src/Menu/Dialog/DialogFile.asm

@@ -249 +249 @@
 ALIGN JUMP_ALIGN
 AppendFileFromDTAinDSSItoOffScreenBuffer:
-    call    .FilterCurrentDirectory         ; We never want "."
-    call    .FilterUpDirectoryWhenInRoot    ; No ".." when in root directory
+    cmp     WORD [si+DTA.szFile], CURRENTDIR_CHARACTERS
+    je      SHORT .Return                   ; We never want "."
+    test    dl, dl
+    jnz     SHORT .NotInRootDirectory
+    cmp     WORD [si+DTA.szFile], UPDIR_CHARACTERS
+    je      SHORT .Return                   ; No ".." when in root directory
+.NotInRootDirectory:
     inc     cx                              ; Nothing filtered so increment files/directories
 
@@ -262 +267 @@
     pop     si
     pop     bp
-    ret
-
-;--------------------------------------------------------------------
-; .FilterCurrentDirectory
-; .FilterUpDirectoryWhenInRoot
-;   Parameters:
-;       DL:     Zero if root directory selected
-;       DS:SI:  Ptr to DTA containing file information
-;   Returns:
-;       Nothing
-;       Returns from AppendFileToBufferInESDIfromDtaInDSSI when filtering
-;   Corrupts registers:
-;       AX
-;--------------------------------------------------------------------
-ALIGN JUMP_ALIGN
-.FilterCurrentDirectory:
-    cmp     WORD [si+DTA.szFile], CURRENTDIR_CHARACTERS
-    je      SHORT .DoFilter
-    ret
-
-ALIGN JUMP_ALIGN
-.FilterUpDirectoryWhenInRoot:
-    test    dl, dl          ; Set ZF if root directory selected
-    jnz     SHORT .ReturnWithoutFiltering
-    cmp     WORD [si+DTA.szFile], UPDIR_CHARACTERS
-    jne     SHORT .ReturnWithoutFiltering
-.DoFilter:
-    add     sp, BYTE 2      ; Remove return address from stack
-ALIGN JUMP_ALIGN, ret
-.ReturnWithoutFiltering:
+.Return:
     ret
 
@@ -473 +449 @@
 ALIGN JUMP_ALIGN
 GetInfoLinesToCXandDialogFlagsToAX:
-    xor     ax, ax
-    call    GetDialogFlagsToAL
-    jmp     Bit_GetSetCountToCXfromAX
+    ePUSH_T ax, Bit_GetSetCountToCXfromAX
+    xor     ah, ah
+    ; Fall to GetDialogFlagsToAL
 
 ;--------------------------------------------------------------------
@@ -696 +672 @@
     call    .ChangeDriveToUserSelectionFromIoInDSSI
     add     sp, BYTE DRIVE_DIALOG_IO_size
+.UserCancelledDriveChange:
     ret
 
@@ -729 +706 @@
     jne     SHORT .UserCancelledDriveChange
 
+    ; Install our Custom Critical Error Handler to catch "Drive Not Ready" errors. This handler only works on DOS 3.0+ systems
+    ; but that should be OK because only DOS 3.1+ will trigger it. Under older DOS versions drives are enumerated using
+    ; GET_DOS_DRIVE_PARAMETER_BLOCK_FOR_SPECIFIC_DRIVE which will access the drive so we know it is available at this point.
+    mov     dx, DosCritical_CustomHandler
+    call    DosCritical_InstallNewHandlerFromCSDX
+
+    ; Save the current drive on stack in case the selected drive is not ready and the user decides to cancel the change.
+    call    Drive_GetDefaultToAL
+    xchg    dx, ax
+
+.RetryDrive:
+    push    dx                                  ; Save the previous current drive to stack
+
     mov     dl, [si+DRIVE_DIALOG_IO.bReturnDriveNumber]
     call    Drive_SetDefaultFromDL
+
+    ; Now we must try to force a media access to catch "Drive Not Ready".
+    push    ds
+    push    ss
+    pop     ds
+    ePUSH_T ax, CURRENTDIR_CHARACTERS
+    mov     cx, FLG_FILEATTR_DIRECTORY
+    mov     dx, sp
+    mov     ax, FIND_FIRST_MATCHING_FILE<<8
+    int     DOS_INTERRUPT_21h
+    pop     ax
+    pop     ds
+
+    pop     dx                                  ; Restore the previous current drive from stack
+
+    xchg    ah, [cs:bLastCriticalError]         ; Zero bLastCriticalError and fetch error code to AH
+    cmp     ah, ERR_DOS_DRIVE_NOT_READY
+    jne     SHORT .DriveIsReady
+
+    mov     bx, g_szDlgDriveNotReady
+    call    Dialogs_DisplayYesNoResponseDialogWithTitleStringInBX
+    jz      SHORT .RetryDrive
+    ; The user cancelled the drive change. Restore current drive to what it was previously.
+    call    Drive_SetDefaultFromDL
+    jmp     DosCritical_RestoreDosHandler
+
+.DriveIsReady:
+    call    DosCritical_RestoreDosHandler
     jmp     RefreshFilesToDisplay
-.UserCancelledDriveChange:
-    ret
 
 

trunk/Assembly_Library/Src/Menu/MenuAttributes.asm

@@ -91 +91 @@
 
 .rgcColorAttributes:
+; Classic (default theme)
 istruc ATTRIBUTE_CHARS
     at  ATTRIBUTE_CHARS.cBordersAndBackground,  db  COLOR_ATTRIBUTE(COLOR_YELLOW, COLOR_BLUE)
@@ -100 +101 @@
     at  ATTRIBUTE_CHARS.cNormalTimeout,         db  COLOR_ATTRIBUTE(COLOR_GREEN, COLOR_BLUE)
 iend
+ColorTheme  equ     MenuAttribute_GetToAXfromTypeInSI.rgcColorAttributes
 
 .rgcBlackAndWhiteAttributes:    ; Only COLOR_WHITE, COLOR_BRIGHT_WHITE and COLOR_BLACK should be used

trunk/Assembly_Library/Src/Menu/MenuBorders.asm

@@ -87 +87 @@
 ;       AX, BX, CX, DX, SI, DI
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_XTIDECFG
 ALIGN MENU_JUMP_ALIGN
 MenuBorders_RefreshItemBorders:

trunk/Assembly_Library/Src/Menu/MenuInit.asm

@@ -114 +114 @@
 ;       AX, BX, DX
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
 ALIGN MENU_JUMP_ALIGN
 MenuInit_CloseMenuIfExitEventAllows:
@@ -138 +138 @@
 
 
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
 ;--------------------------------------------------------------------
 ; MenuInit_HighlightItemFromAX
@@ -168 +168 @@
     mov     ax, [bp+MENUINIT.wHighlightedItem]
     ret
-%endif ; EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%endif ; EXCLUDE_FROM_XUB
 
 
@@ -183 +183 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
+%ifndef EXCLUDE_FROM_XTIDECFG
 ALIGN MENU_JUMP_ALIGN
 MenuInit_SetTitleHeightFromAL:
@@ -193 +194 @@
     mov     [bp+MENUINIT.bInfoLines], al
     ret
+%endif ; EXCLUDE_FROM_XTIDECFG
 
 ALIGN MENU_JUMP_ALIGN
@@ -198 +200 @@
     mov     [bp+MENUINIT.wItems], ax
     ret
-%endif
+%endif ; EXCLUDE_FROM_XUB
 
 
@@ -212 +214 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
+%ifndef EXCLUDE_FROM_XTIDECFG
 ALIGN MENU_JUMP_ALIGN
 MenuInit_SetUserDataFromDSSI:
@@ -218 +221 @@
     mov     [bp+MENU.dwUserData+2], ds
     ret
+%endif ; EXCLUDE_FROM_XTIDECFG
 
 ALIGN MENU_JUMP_ALIGN
@@ -223 +227 @@
     lds     si, [bp+MENU.dwUserData]
     ret
-%endif
+%endif ; EXCLUDE_FROM_XUB

trunk/Assembly_Library/Src/Menu/MenuLocation.asm

@@ -55 +55 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
 MenuLocation_GetItemBordersTopLeftCoordinatesToAX:
 %endif

trunk/Assembly_Library/Src/Menu/MenuText.asm

@@ -32 +32 @@
 ;       AX, BX, CX, DX, SI, DI
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_XTIDECFG
 ALIGN MENU_JUMP_ALIGN
 MenuText_ClearTitleArea:

trunk/Assembly_Library/Src/Serial/SerialServer.asm

@@ -61 +61 @@
         push    ax              ; working copy on the top of the stack
 
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS   ; DF already cleared in Int13h.asm
+%ifndef EXCLUDE_FROM_XUB        ; DF already cleared in Int13h.asm
+%ifdef CLD_NEEDED
         cld
+%endif
 %endif
 

trunk/Assembly_Library/Src/String/Char.asm

@@ -51 +51 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifdef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifdef EXCLUDE_FROM_XUB
     %ifndef MODULE_HOTKEYS
         %define EXCLUDE
@@ -57 +57 @@
 %endif
 
-%ifndef EXCLUDE
+%ifndef EXCLUDE OR EXCLUDE_FROM_BIOSDRVS
 ALIGN STRING_JUMP_ALIGN
 Char_IsLowerCaseLetterInAL:
@@ -76 +76 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN STRING_JUMP_ALIGN
 Char_IsUpperCaseLetterInAL:
@@ -95 +95 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN STRING_JUMP_ALIGN
 Char_IsHexadecimalDigitInAL:
@@ -136 +136 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN STRING_JUMP_ALIGN
 Char_ConvertIntegerToALfromDigitInALwithBaseInBX:
@@ -166 +166 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN STRING_JUMP_ALIGN
 Char_CharIsValid:
@@ -174 +174 @@
 
 
-%ifdef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifdef EXCLUDE_FROM_XUB
     %ifndef MODULE_HOTKEYS
         %define EXCLUDE
@@ -201 +201 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN STRING_JUMP_ALIGN
 Char_ALtoLowerCaseLetter:
@@ -218 +218 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN STRING_JUMP_ALIGN
 Char_ALtoUpperCaseLetter:
@@ -237 +237 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 Char_ChangeCaseInAL:
     xor     al, 32
@@ -254 +254 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_BIOSDRVS
 ALIGN STRING_JUMP_ALIGN
 Char_GetFilterFunctionToDXforNumericBaseInBX:

trunk/Assembly_Library/Src/Time/TimerTicks.asm

@@ -48 +48 @@
 ;       CX
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
 %ifndef EXCLUDE_FROM_XTIDECFG
 ALIGN JUMP_ALIGN
@@ -64 +64 @@
     div     cx      ; Divide DX:AX by CX, Minutes to AX, remainder ticks to DX
     ret
-%endif ; EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
-
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS OR EXCLUDE_FROM_XTIDECFG
+%endif ; EXCLUDE_FROM_XUB
+
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_XTIDECFG
 ALIGN JUMP_ALIGN
 TimerTicks_GetSecondsToAXandRemainderTicksToDXfromTicksInDX:
@@ -80 +80 @@
 
 
-%ifdef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifdef EXCLUDE_FROM_XUB
     %ifndef MODULE_BOOT_MENU
         %define EXCLUDE
@@ -164 +164 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_XTIDECFG
 ALIGN JUMP_ALIGN
 TimerTicks_GetElapsedToAXandResetDSBX:
@@ -184 +184 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_XTIDECFG
 ALIGN JUMP_ALIGN
 TimerTicks_GetElapsedToAXfromDSBX:
@@ -202 +202 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifdef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifdef EXCLUDE_FROM_XUB
     %ifndef MODULE_BOOT_MENU OR MODULE_HOTKEYS
         %define EXCLUDE

trunk/Assembly_Library/Src/Util/Bit.asm

@@ -24 +24 @@
 ; Bit_GetSetCountToCXfromDXAX
 ;   Parameters
-;       DX:AX:      Source DWORD
+;       DX:AX:  Source DWORD
 ;   Returns:
 ;       CX:     Number of bits set in DX:AX
@@ -58 +58 @@
     push    ax
 
-    xor     cx, cx
+    mov     cx, -1
 ALIGN JUMP_ALIGN
-.BitScanLoop:
+.IncrementCX:
+    inc     cx
+.ShiftLoop:
     shr     ax, 1
-    jz      SHORT .LastBitInCF
-    adc     cl, ch
-    jmp     SHORT .BitScanLoop
-ALIGN JUMP_ALIGN
-.LastBitInCF:
-    adc     cl, ch
+    jc      SHORT .IncrementCX
+    jnz     SHORT .ShiftLoop
 
     pop     ax
@@ -95 +93 @@
     ret
 
+
 ;--------------------------------------------------------------------
 ; Bit_SetToAXfromIndexInCL
@@ -115 +114 @@
     pop     dx
     ret
+

trunk/Assembly_Library/Src/Util/Math.asm

@@ -33 +33 @@
 ;       AX
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS OR EXCLUDE_FROM_XTIDECFG
+%ifndef EXCLUDE_FROM_XTIDECFG
 ALIGN JUMP_ALIGN
 Math_DivQWatSSBPbyCX:
-%if 1
-    xor     dx, dx
-    mov     ax, [bp+6]      ; Load highest divident WORD to DX:AX
-    div     cx
-    mov     [bp+6], ax      ; Store quotient
-
-    mov     ax, [bp+4]
-    div     cx
-    mov     [bp+4], ax
-
-    mov     ax, [bp+2]
-    div     cx
-    mov     [bp+2], ax
-
-    mov     ax, [bp]
-    div     cx
-    mov     [bp], ax
-    ret
-%else ; ~1
-; This is about half the size compared to the above code but it's not tested which is why it's commented away.
     push    di
     mov     di, 6
@@ -65 +45 @@
     dec     di
     dec     di
-    jns     .Next
+    jns     SHORT .Next
     pop     di
     ret
-%endif ; 1
 %endif
 
@@ -83 +62 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDECFG
+%ifndef EXCLUDE_FROM_XTIDECFG OR EXCLUDE_FROM_BIOSDRVS
 ALIGN JUMP_ALIGN
 Math_DivDXAXbyCX:

trunk/Assembly_Library/Src/Util/Memory.asm

@@ -24 +24 @@
 ; OPTIMIZE_STRING_OPERATION
 ;   Parameters
-;       %1:     Repeat instruction
-;       %2:     String instruction without size (for example MOVS and not MOVSB or MOVSW)
+;       %1:     String instruction without size (only MOVS and STOS is supported)
 ;       CX:     Number of BYTEs to operate
-;       DS:SI:  Ptr to source data
+;       DS:SI:  Ptr to source data (for MOVS)
 ;       ES:DI:  Ptr to destination
 ;   Returns:
+;       CF:     Cleared
+;       CX:     Zero
 ;       SI, DI: Updated by number of bytes operated
 ;   Corrupts registers:
 ;       Nothing
 ;--------------------------------------------------------------------
-%macro OPTIMIZE_STRING_OPERATION 2
-    push    cx
-
-    shr     cx, 1           ; Operate with WORDs for performance
-    jz  %%HandleRemainingByte
-    %1      %2w
-%%HandleRemainingByte:
-    jnc     SHORT %%OperationCompleted
-    %2b
-
-ALIGN JUMP_ALIGN
-%%OperationCompleted:
-    pop     cx
+%macro OPTIMIZE_STRING_OPERATION 1
+    shr     cx, 1
+    rep     %1w
+    eRCL_IM cx, 1
+    rep     %1b
 %endmacro
 
@@ -57 +50 @@
 ;       ES:DI:  Ptr to destination buffer
 ;   Returns:
+;       CF:     Cleared
 ;       SI, DI: Updated by number of bytes copied
 ;   Corrupts registers:
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
 ALIGN JUMP_ALIGN
 Memory_CopyCXbytesFromDSSItoESDI:
-    OPTIMIZE_STRING_OPERATION rep, movs
+    push    cx
+    OPTIMIZE_STRING_OPERATION movs
+    pop     cx
     ret
 %endif
@@ -77 +73 @@
 ;       Nothing
 ;   Corrupts registers:
-;       Nothing
+;       CX
 ;--------------------------------------------------------------------
 %ifdef INCLUDE_MENU_LIBRARY
@@ -102 +98 @@
 ;       DI:     Updated by number of BYTEs stored
 ;   Corrupts registers:
-;       AX
+;       AX, CX
 ;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
@@ -118 +114 @@
 ;       DI:     Updated by number of BYTEs stored
 ;   Corrupts registers:
-;       Nothing
+;       CX
 ;--------------------------------------------------------------------
-ALIGN JUMP_ALIGN
 Memory_StoreCXbytesFromAccumToESDI:
-    OPTIMIZE_STRING_OPERATION rep, stos
+    OPTIMIZE_STRING_OPERATION stos
     ret
 
@@ -135 +130 @@
 ;       AX
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
 ALIGN JUMP_ALIGN
 Memory_ReserveCXbytesFromStackToDSSI:

trunk/Assembly_Library/Src/Util/Reboot.asm

@@ -44 +44 @@
     mov     al, 0FEh                ; System reset (AT+ keyboard controller)
     out     64h, al                 ; Reset computer (AT+)
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
     %ifdef INCLUDE_TIME_LIBRARY
         mov     ax, 10

trunk/Assembly_Library/Src/Util/Registers.asm

@@ -59 +59 @@
 %endif
 
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifndef EXCLUDE_FROM_XUB
 ALIGN JUMP_ALIGN
 Registers_CopySSBPtoDSSI:
@@ -91 +91 @@
 ;
 ;--------------------------------------------------------------------
-%ifndef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS OR EXCLUDE_FROM_XTIDECFG
+%ifndef EXCLUDE_FROM_XUB OR EXCLUDE_FROM_XTIDECFG
 ALIGN JUMP_ALIGN
 Registers_NormalizeESSI:
     mov         cx, si
-    and         si, byte 0fh
-    jmp         Registers_NormalizeFinish
+    and         si, BYTE 0Fh
+    jmp         SHORT Registers_NormalizeFinish
 
 ALIGN JUMP_ALIGN
 Registers_NormalizeESDI:
     mov         cx, di
-    and         di, byte 0fh
+    and         di, BYTE 0Fh
 ;;; fall-through
 

trunk/Assembly_Library/Src/Util/Size.asm

@@ -70 +70 @@
     jae     SHORT Size_DivideSizeInBXDXAXby1024andIncrementMagnitudeInCX
     add     sp, BYTE 2                  ; Clean return address from stack
-    xchg    si, cx                      ; CX = Remainder (0...1023), SI = Magnitude
 
     ; Convert remainder to tenths
-    xchg    bx, ax                      ; Store AX
-    mov     al, 5                       ; AH = 0
-    mul     cx                          ; DX:AX = remainder * (10 / 2)
-%ifdef USE_186
-    shr     ax, 9                       ; Divide AX by (1024 / 2)
-%else
-    shr     ax, 1
-    mov     al, ah
-    cbw
-%endif
-    xchg    cx, ax                      ; CX = tenths
-    xchg    ax, bx
+    mov     bx, 640
+    xchg    bx, ax                      ; BX = Size, AX = (10 / 1024) * 65536
+    mul     si                          ; DX = Remainder * (10 / 1024)
+    xchg    dx, ax
+    xchg    cx, ax                      ; CX = Tenths, AX = Magnitude
+    xchg    bx, ax                      ; AX = Size, BX = Magnitude
 
     ; Convert magnitude to character
-    mov     dl, [cs:si+.rgbMagnitudeToChar]
+    mov     dl, [cs:bx+.rgbMagnitudeToChar]
 
     pop     si
@@ -154 +147 @@
 ;       Nothing
 ;--------------------------------------------------------------------
-%ifdef EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS
+%ifdef EXCLUDE_FROM_XUB
     %ifdef USE_386
         %define EXCLUDE

trunk/Assembly_Library/Src/Util/Sort.asm

@@ -63 +63 @@
     push    cx
 
+%ifdef CLD_NEEDED
     cld
+%endif
     mov     cx, di                      ; Restore item size to CX
     xor     ax, ax                      ; Zero starting index
@@ -191 +193 @@
 
     cmp     ax, dx  ; If (left <= right)
-    jg      SHORT ArrangeItemsInRangeAXtoDXtoBothSidesOfPivotInESDI
+    jg      SHORT .BreakLoopSinceAllItemsExamined
     call    SwapItemsFromIndexesAXandDX
     inc     ax

trunk/BIOS_Drive_Information_Tool/Src/AtaInfo.asm

@@ -71 +71 @@
 
     ; Print L-CHS generated by XTIDE Universal BIOS
-    call    DisplayXTUBcompatibilityInfoUsingAtaInfoFromDSBX
+    call    DisplayXUBcompatibilityInfoUsingAtaInfoFromDSBX
 
 .SkipAtaInfoSinceError:
@@ -80 +80 @@
 
 ;--------------------------------------------------------------------
-; DisplayXTUBcompatibilityInfoUsingAtaInfoFromDSBX
+; DisplayPCHSusingAtaInfoFromDSBX
 ;   Parameters:
 ;       BX:     Offset to ATA Information
@@ -193 +193 @@
 DisplayPioModeInformationUsingAtaInfoFromDSBX:
     ; Load standard timings (up to PIO-2)
-    mov     ax, [bx+ATA1.bPioMode]
+    mov     al, [bx+ATA1.bPioMode]
+    cbw
     mov     si, ax
-    shl     si, 1       ; Shift for WORD lookup
+    eSHL_IM si, 1       ; Shift for WORD lookup
     mov     dx, [si+.rgwStandardPioTimings] ; Load min cycle time
     mov     cx, -1      ; IORDY not supported
@@ -203 +204 @@
     jz      SHORT .NoAdvancedPioModesSupported
 
-    mov     si, [bx+ATA2.bPIOSupp]  ; Advanced mode flags
+    mov     si, 0FFh
+    and     si, [bx+ATA2.bPIOSupp]  ; Advanced mode flags
+    jz      SHORT .NoAdvancedPioModesSupported
 .IncrementPioMode:
     inc     ax
@@ -222 +225 @@
 
 ;--------------------------------------------------------------------
-; DisplayXTUBcompatibilityInfoUsingAtaInfoFromDSBX
+; DisplayXUBcompatibilityInfoUsingAtaInfoFromDSBX
 ;   Parameters:
 ;       BX:     Offset to ATA Information
@@ -230 +233 @@
 ;       AX, BX, CX, DX, BP, SI, DI
 ;--------------------------------------------------------------------
-DisplayXTUBcompatibilityInfoUsingAtaInfoFromDSBX:
+DisplayXUBcompatibilityInfoUsingAtaInfoFromDSBX:
     ; Display header
-    mov     ax, g_szXTUBversion
-    mov     si, g_szXTUB
+    mov     ax, g_szXUBversion
+    mov     si, g_szXUB
     call    Print_FormatStringFromSIwithParameterInAX
 

trunk/BIOS_Drive_Information_Tool/Src/Print.asm

@@ -149 +149 @@
     xor     dh, dh
     mov     si, dx
-    shl     si, 1       ; Shift for WORD lookup
+    eSHL_IM si, 1       ; Shift for WORD lookup
     push    WORD [si+.rgszXlateModeToString]
 
@@ -197 +197 @@
 ;--------------------------------------------------------------------
 Print_NameFromAtaInfoInBX:
+%ifdef CLD_NEEDED
     cld
+%endif
+    mov     bp, sp
     lea     si, [bx+ATA1.strModel]
+    push    si
     mov     di, si
     mov     cx, A1_MODEL_NUMBER_LENGTH/2
@@ -211 +215 @@
     stosb               ; Terminate with NULL
 
-    mov     bp, sp
-    lea     si, [bx+ATA1.strModel]
-    push    si
     mov     si, g_szFormatDrvName
     jmp     SHORT JumpToFormatNullTerminatedStringFromSI

trunk/BIOS_Drive_Information_Tool/Src/Strings.asm

@@ -21 +21 @@
 SECTION .data
 
-g_szProgramName:    db  "BIOS Drive Information Tool v1.0.2",CR,LF
-                    db  "(C) 2012-2016 by XTIDE Universal BIOS Team",CR,LF
+g_szProgramName:    db  "BIOS Drive Information Tool v1.0.3",CR,LF
+                    db  "(C) 2012-2018 by XTIDE Universal BIOS Team",CR,LF
                     db  "Released under GNU GPL v2",CR,LF
                     db  "http://xtideuniversalbios.org/",CR,LF,NULL
@@ -42 +42 @@
 g_szBlockMode:      db  " Block mode   : Set to %u from max %u sectors",CR,LF,NULL
 g_szPIO:            db  " PIO mode     : Max %u, Min cycle times: %u ns, with IORDY %d ns",CR,LF,NULL
-g_szXTUB:           db  "XTIDE Universal BIOS %s generates following L-CHS...",CR,LF,NULL
-g_szXTUBversion:    db  ROM_VERSION_STRING  ; This one is NULL terminated
+g_szXUB:            db  "XTIDE Universal BIOS %s generates following L-CHS...",CR,LF,NULL
+g_szXUBversion:     db  ROM_VERSION_STRING  ; This one is NULL terminated
 
 g_szOldInfoHeader:  db  "Old INT 13h information from AH=08h and AH=15h...",CR,LF,NULL

trunk/BIOS_Drive_Information_Tool/makefile

@@ -52 +52 @@
 # Assembler preprocessor defines.                               #
 #################################################################
-DEFINES = 
+DEFINES = EXCLUDE_FROM_BIOSDRVS
 DEFINES_XT = ELIMINATE_CGA_SNOW
 DEFINES_XTPLUS = USE_186 ELIMINATE_CGA_SNOW
@@ -98 +98 @@
 ASFLAGS += $(IHEADERS)          # Set header file directory paths
 ASFLAGS += -Worphan-labels      # Warn about labels without colon
-ASFLAGS += -O9                  # Optimize operands to their shortest forms
+ASFLAGS += -Ox                  # Optimize operands to their shortest forms
 
 
@@ -130 +130 @@
     @upx -qq --8086 --ultra-brute $(TARGET).$(EXTENSION)
     @echo Done! XT version is ready for release.
+
+xt_unused: xt
+    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_xt_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
+    @perl ..\Tools\unused.pl $(TARGET)_xt.lst $(TARGET)_xt_unused.asm
+

trunk/Serial_Server/library/Checksum.cpp

@@ -343 +343 @@
             }
 
-            bbuff[ rand() % 512 ] ^= bit[ rand() % 8 ];
+            bbuff[ rand() & 511 ] ^= bit[ rand() & 7 ];
 
             if( b > 0 )

trunk/Serial_Server/library/Image.cpp

@@ -131 +131 @@
             sect = 63;
         }
-        else if( (totallba % 16) != 0 || ((totallba/16) % 63) != 0 )
+        else if( (totallba & 15) != 0 || ((totallba/16) % 63) != 0 )
         {
             log( -1, "'%s', file size does not match standard CHS geometry (x:16:63), please specify geometry explicitly with -g", name );

trunk/Serial_Server/win32/Win32.cpp

@@ -37 +37 @@
 char *bannerStrings[] = {
     "SerDrive - XTIDE Universal BIOS Serial Drive Server",
-    "Copyright (C) 2012-2013 by XTIDE Universal BIOS Team",
+    "Copyright (C) 2012-2018 by XTIDE Universal BIOS Team",
     "Released under GNU GPL v2, with ABSOLUTELY NO WARRANTY",
     ROM_VERSION_STRING,
@@ -49 +49 @@
     "http://www.gnu.org/licenses/gpl-2.0.html",
     "",
-    "Visit the wiki on http://code.google.com/p/xtideuniversalbios for detailed",
-    "serial drive usage directions.",
+    "Visit the wiki on http://xtideuniversalbios.org for detailed usage directions.",
     "",
     "Usage: SerDrive [options] imagefile [[slave-options] slave-imagefile]",

trunk/XTIDE_Universal_BIOS/Inc/BootVars.inc

@@ -28 +28 @@
 ; Number of times to retry booting before accepting error
 BOOT_READ_RETRY_TIMES       EQU     3
-
-
 
 ; Pre-boot variables. These do not exist after successful boot to OS.
@@ -69 +67 @@
 %endif ; MODULE_HOTKEYS
 
+; MAX_HARD_DISK_NAME_LENGTH must be defined ahead of the DRVDETECTINFO structure to avoid problems with NASM
+MAX_HARD_DISK_NAME_LENGTH   EQU     30      ; Bytes reserved for drive name
+
 struc DRVDETECTINFO
     .StartOfDrvDetectInfo:
@@ -79 +80 @@
 endstruc
 
-; Boot Menu Information Table. These are generated for all XTIDE Universal
-; BIOS drives. Available only until boot is successful.
-MAX_HARD_DISK_NAME_LENGTH           EQU     30      ; Bytes reserved for drive name
 DPT_DRVDETECTINFO_SIZE_MULTIPLIER   EQU     DRVDETECTINFO_size / LARGEST_DPT_SIZE
 
-
 %ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
-
 %if MAX_HARD_DISK_NAME_LENGTH % 2 <> 0
     %error "MAX_HARD_DISK_NAME_LENGTH needs to be a multiple of 2, memory is moved with word operations."
 %endif
-
-%if DRVDETECTINFO_size % LARGEST_DPT_SIZE <> 0
-    %error "DRVDETECTINFO's size must be an even multiple of DPT's size.  Add or remove padding at the bottom of DRVDETECTINFO to bring the two sizes into alignment.  As DRVDETECTINFO is only used at boot time, with plenty of memory to consume, it is OK to waste some space here."
-%endif
-
-%if DRVDETECTINFO.szDrvName <> 0
-    %error "DRVDETECTINFO.szDrvName is assumed to be the first member of struc DRVDETECTINFO, in BootMenuPrint_RefreshItem"
-%endif
-
 %endif
 

trunk/XTIDE_Universal_BIOS/Inc/IdeIO.inc

@@ -57 +57 @@
 %ifndef MODULE_8BIT_IDE ; Standard IDE controllers only
 
+    eMOVZX  bx, [di+DPT.bIdevarsOffset]
     %ifnidni %1, dx
         mov     dx, %1
     %endif
-    eMOVZX  bx, BYTE [di+DPT.bIdevarsOffset]
     add     dx, [cs:bx+IDEVARS.wControlBlockPort]
     out     dx, al

trunk/XTIDE_Universal_BIOS/Inc/RomVars.inc

@@ -35 +35 @@
     .wDisplayMode       resb    2   ; Display mode for boot menu
     .wBootTimeout       resb    2   ; Boot Menu selection timeout in system timer ticks
+    .pColorTheme        resb    2   ; Ptr to the color attribute struc used by the boot menu and hotkey bar
     .bIdeCnt            resb    1   ; Number of available IDE controllers
     .bBootDrv           resb    1   ; Default drive to boot from
@@ -182 +183 @@
 endstruc
 
-; Bit defines for DRVPARAMS.wFlags
+; Bit defines for DRVPARAMS.wFlags - these flags are accessed as bytes so changes here might require changes elsewhere
 MASK_DRVPARAMS_WRITECACHE       EQU (3<<0)  ; Bits 0...1, Drive internal write cache settings (must start at bit 0)
     DEFAULT_WRITE_CACHE             EQU 0   ; Must be 0

trunk/XTIDE_Universal_BIOS/Inc/Version.inc

@@ -20 +20 @@
 
 ; Flash signature revisions:
+; XTIDE206  Added support for Color Themes
 ; XTIDE205  Added DEVICE_8BIT_XTCF_PIO16_WITH_BIU_OFFLOAD after other XT-CF
 ;           PIO modes (prevents empty indexes in PIO jump tables)
@@ -48 +49 @@
 %define TITLE_STRING            TITLE_STRING_START, TITLE_STRING_END
 %define ROM_VERSION_STRING      "v2.0.0",BETA,"3+ (",__DATE__,")",NULL
-%define FLASH_SIGNATURE         "XTIDE205"  ; Do not terminate with NULL
+%define FLASH_SIGNATURE         "XTIDE206"  ; Do not terminate with NULL
 
 

trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeCommand.asm

@@ -200 +200 @@
 %ifdef MODULE_IRQ
     test    BYTE [bp+IDEPACK.bDeviceControl], FLG_DEVCONTROL_nIEN
+%ifdef USE_386
+    jnz     IdeWait_IRQorStatusFlagInBLwithTimeoutInBH
+%else
     jz      SHORT .PollStatusFlagInsteadOfWaitIrq
     jmp     IdeWait_IRQorStatusFlagInBLwithTimeoutInBH
 .PollStatusFlagInsteadOfWaitIrq:
 %endif
+%endif ; MODULE_IRQ
     jmp     IdeWait_PollStatusFlagInBLwithTimeoutInBH
 

trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeDPT.asm

@@ -121 +121 @@
     jnz     SHORT .ChangeTo32bitDevice
 
-    and     BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_IORDY   ; No IORDY supported if need to limit
+    and     [di+DPT.bFlagsHigh], ah     ; Mask off FLGH_DPT_IORDY if IORDY not supported
     MIN_U   [di+DPT_ADVANCED_ATA.bPioMode], al
     mov     [di+DPT_ADVANCED_ATA.wMinPioCycleTime], bx

trunk/XTIDE_Universal_BIOS/Src/Device/IDE/JrIdeTransfer.asm

@@ -147 +147 @@
     lds     di, [bp+MEMPIOVARS.fpDPT]           ; DPT now in DS:DI
 %ifdef USE_386
-    movzx   cx, BYTE [bp+MEMPIOVARS.bSectorsDone]
+    movzx   cx, [bp+MEMPIOVARS.bSectorsDone]
 %else
     mov     ch, 0                               ; Preserve CF

trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h.asm

@@ -97 +97 @@
     sti                                 ; Enable interrupts
 %endif
+%ifdef CLD_NEEDED
     cld                                 ; String instructions to increment pointers
+%endif
     ePUSHA
     push    ds
@@ -193 +195 @@
 
     ; Push old INT 13h handler and restore registers
+%ifdef USE_386
+    push    DWORD [RAMVARS.fpOldI13h]
+%else
     push    WORD [RAMVARS.fpOldI13h+2]
     push    WORD [RAMVARS.fpOldI13h]
+%endif
     mov     bx, [bp+IDEPACK.intpack+INTPACK.bx]
     mov     di, [bp+IDEPACK.intpack+INTPACK.di]

trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH0h_HReset.asm

@@ -126 +126 @@
     mov     cx, NUMBER_OF_IDEVARS
 
-.loop:
+.Loop:
     call    FindDPT_MasterOrSingleForIdevarsOffsetInDL
     jc      SHORT .ControllerNotAvailable
@@ -162 +162 @@
 .ControllerNotAvailable:
     add     dl, IDEVARS_size                            ; move Idevars pointer forward
-    loop    .loop
+    loop    .Loop
     ret

trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH1Eh_XTCF.asm

@@ -121 +121 @@
     ;
     ; Also note that some machines, noteably the Olivetti M24 (also known as
-    ; the AT&T PC6300 and Xerox 6060), have hardware errors in the BIU logic,
-    ; resulting in reversed byte ordering.  Therefore, XTCF_8BIT_PIO_MODE is
-    ; the default transfer mode for best system compatibility.
+    ; the AT&T PC6300 or Xerox 6060 or Logabax Persona 1600), have hardware errors
+    ; in the BIU logic, resulting in reversed byte ordering.  Therefore,
+    ; XTCF_8BIT_PIO_MODE is the default transfer mode for best system compatibility.
 
 

trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/EBIOS/AH41h_CheckIfExtensionsPresent.asm

@@ -46 +46 @@
 
     mov     BYTE [bp+IDEPACK.intpack+INTPACK.ah], EBIOS_VERSION
-    mov     WORD [bp+IDEPACK.intpack+INTPACK.bx], 0AA55h
+    not     WORD [bp+IDEPACK.intpack+INTPACK.bx]    ; 55AAh = AA55h
 
 %ifdef MODULE_COMPATIBLE_TABLES
@@ -75 +75 @@
 ;--------------------------------------------------------------------
 AH41h_GetSupportBitsToCX:
+%ifdef USE_AT   ; Always in Full mode
+%ifndef MODULE_8BIT_IDE OR MODULE_SERIAL
+    mov     cx, ENHANCED_DRIVE_ACCESS_SUPPORT | ENHANCED_DISK_DRIVE_SUPPORT
+%else
+    mov     cx, ENHANCED_DRIVE_ACCESS_SUPPORT
+    cmp     BYTE [di+DPT_ATA.bDevice], DEVICE_8BIT_ATA
+    jae     SHORT .DoNotSetEDDflag
+    or      cl, ENHANCED_DISK_DRIVE_SUPPORT
+%endif
+%else ; ~USE_AT
     mov     cx, ENHANCED_DRIVE_ACCESS_SUPPORT
 
     ; DPTE needs buffer from RAM so do not return it in lite mode
-%ifndef USE_AT
     test    BYTE [cs:ROMVARS.wFlags], FLG_ROMVARS_FULLMODE
     jz      SHORT .DoNotSetEDDflag
-%endif
 
 %ifdef MODULE_8BIT_IDE OR MODULE_SERIAL
@@ -91 +99 @@
 
     or      cl, ENHANCED_DISK_DRIVE_SUPPORT ; AH=48h returns DPTE
+%endif ; USE_AT
 .DoNotSetEDDflag:
     ret

trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/Tools/Address.asm

@@ -110 +110 @@
     and     al, MASKL_DPT_TRANSLATEMODE
 
-;;; 0: ADDRESSING_MODE_NORMAL
+;;; 0: TRANSLATEMODE_NORMAL
     jz      SHORT DoNotConvertLCHS
 
-;;; 1: ADDRESSING_MODE_LARGE
+;;; 1: TRANSLATEMODE_LARGE
     test    al, FLGL_DPT_ASSISTED_LBA
     jz      SHORT ConvertLargeModeLCHStoPCHS
 
-;;; 2: ADDRESSING_MODE_ASSISTED_LBA
+;;; 2: TRANSLATEMODE_ASSISTED_LBA
     ; Fall to ConvertAssistedLBAModeLCHStoLBARegisterValues
 

trunk/XTIDE_Universal_BIOS/Src/Handlers/Int19h.asm

@@ -30 +30 @@
 Int19h_BootLoaderHandler:
     sti                                         ; Enable interrupts
+%ifdef CLD_NEEDED
     cld                                         ; String instructions to increment pointers
+%endif
 %ifdef MODULE_VERY_LATE_INIT
     LOAD_BDA_SEGMENT_TO ds, ax                  ; Load BDA segment (zero) to DS

trunk/XTIDE_Universal_BIOS/Src/Initialization/AdvancedAta/AdvAtaInit.asm

@@ -60 +60 @@
 ;       AX:     ID WORD specific for detected controller
 ;   Returns:
-;       AL:     Max supported PIO mode
-;       AH:     FLGH_DPT_IORDY if IORDY supported, zero otherwise
+;       AL:     Max supported PIO mode (only if ZF set)
+;       AH:     ~FLGH_DPT_IORDY if IORDY not supported, -1 otherwise (only if ZF set)
 ;       BX:     Min PIO cycle time (only if ZF set)
 ;       ZF:     Set if PIO limit necessary

trunk/XTIDE_Universal_BIOS/Src/Initialization/AdvancedAta/PDC20x30.asm

@@ -127 +127 @@
 
     ; PDC20230C and PDC20630 clears the bit we set at the beginning
-    in      al, dx
+    in      al, dx  ; 1F2h
     dec     dx
     dec     dx      ; Base port
@@ -139 +139 @@
 ;       AX:     ID WORD specific for detected controller
 ;   Returns:
-;       AL:     Max supported PIO mode
-;       AH:     FLGH_DPT_IORDY if IORDY supported, zero otherwise
+;       AL:     Max supported PIO mode (only if ZF set)
+;       AH:     ~FLGH_DPT_IORDY if IORDY not supported, -1 otherwise (only if ZF set)
 ;       BX:     Min PIO cycle time (only if ZF set)
 ;       ZF:     Set if PIO limit necessary
@@ -148 +148 @@
 ;--------------------------------------------------------------------
 PDC20x30_GetMaxPioModeToALandMinPioCycleTimeToBX:
-    cmp     ah, ID_PDC20630
-    je      SHORT .Return       ; No need to limit anything
-    mov     ax, 2               ; Limit PIO to 2 for ID_PDC20230
+    cmp     ah, ID_PDC20230
+    jne     SHORT .Return                           ; No need to limit anything for ID_PDC20630
+    mov     ax, (~FLGH_DPT_IORDY & 0FFh) << 8 | 2   ; Limit PIO to 2 for ID_PDC20230
     mov     bx, PIO_2_MIN_CYCLE_TIME_NS
-    stc
 .Return:
     ret
@@ -206 +205 @@
 ;--------------------------------------------------------------------
 SetSpeedForDriveInCX:
-    eMOVZX  bx, BYTE [di+DPT_ADVANCED_ATA.bPioMode]
-    MIN_U   bl, 2   ; Limit to PIO2
-    mov     bl, [cs:bx+.rgbPioModeToPDCspeedValue]
+    mov     bx, .rgbPioModeToPDCspeedValue
+    mov     al, [di+DPT_ADVANCED_ATA.bPioMode]
+    MIN_U   al, 2   ; Limit to PIO2
+    cs xlat
+    xchg    bx, ax
 
     add     dx, BYTE SECTOR_NUMBER_REGISTER

trunk/XTIDE_Universal_BIOS/Src/Initialization/AdvancedAta/Vision.asm

@@ -131 +131 @@
 ;       AH:     QDI Vision Controller ID
 ;   Returns:
-;       AL:     Max supported PIO mode
-;       AH:     FLGH_DPT_IORDY if IORDY supported, zero otherwise
+;       AL:     Max supported PIO mode (only if ZF set)
+;       AH:     ~FLGH_DPT_IORDY if IORDY not supported, -1 otherwise (only if ZF set)
 ;       BX:     Min PIO Cycle Time (only if ZF set)
 ;       ZF:     Set if PIO limit necessary
@@ -142 +142 @@
     cmp     ah, ID_QD6500
     jne     SHORT .NoNeedToLimitForQD6580
-
-    mov     ax, 2   ; Limit to PIO 2 because QD6500 does not support IORDY
+    mov     ax, (~FLGH_DPT_IORDY & 0FFh) << 8 | 2   ; Limit to PIO 2 because QD6500 does not support IORDY
     mov     bx, PIO_2_MIN_CYCLE_TIME_NS
 .NoNeedToLimitForQD6580:

trunk/XTIDE_Universal_BIOS/Src/Initialization/AtaID.asm

@@ -104 +104 @@
 ;       DX:     User defined P-CHS to L-CHS translate mode
 ;   Corrupts registers:
-;       AX, BX, CX
+;       AX, BX
 ;--------------------------------------------------------------------
 AtaID_ModifyESSIforUserDefinedLimitsAndReturnTranslateModeInDX:
@@ -113 +113 @@
     pop     ds
 
-    ; Load User Defined CHS or LBA to CX:AX
-    mov     dx, [bx+DRVPARAMS.wFlags]
+    ; Load User Defined CHS or LBA to BX:AX
+    mov     dl, [bx+DRVPARAMS.wFlags]           ; Only load the flags we actually need
     mov     ax, [bx+DRVPARAMS.wCylinders]       ; Or .dwMaximumLBA
-    mov     cx, [bx+DRVPARAMS.wHeadsAndSectors] ; Or .dwMaximumLBA+2
+    mov     bx, [bx+DRVPARAMS.wHeadsAndSectors] ; Or .dwMaximumLBA+2
 
     push    es
@@ -127 +127 @@
     ; Apply new CHS and disable LBA (we also want to set CHS addressing)
     mov     [si+ATA1.wCylCnt], ax
-    eMOVZX  ax, cl
+    eMOVZX  ax, bl
     mov     [si+ATA1.wHeadCnt], ax
-    mov     al, ch
+    mov     al, bh
     mov     [si+ATA1.wSPT], ax
     and     BYTE [si+ATA1.wCaps+1], ~(A1_wCaps_LBA>>8)
@@ -140 +140 @@
 
     ; Apply new LBA and disable LBA48
-    cmp     cx, [si+ATA1.dwLBACnt+2]
+    cmp     bx, [si+ATA1.dwLBACnt+2]
     ja      SHORT .NoUserDefinedLBA     ; Do not set larger than drive
     jb      SHORT .StoreNewLBA
@@ -147 +147 @@
 .StoreNewLBA:
     mov     [si+ATA1.dwLBACnt], ax
-    mov     [si+ATA1.dwLBACnt+2], cx
+    mov     [si+ATA1.dwLBACnt+2], bx
     and     BYTE [si+ATA6.wSetSup83+1], ~(A6_wSetSup83_LBA48>>8)
 .NoUserDefinedLBA:
@@ -173 +173 @@
 AtaID_GetMaxPioModeToAXandMinCycleTimeToCX:
     ; Get PIO mode and cycle time for PIO 0...2
-    mov     bx, [es:si+ATA1.bPioMode]
-    mov     ax, bx                  ; AH = 0, AL = PIO mode 0, 1 or 2
-    eSHL_IM bx, 1                   ; Shift for WORD lookup
+%ifdef USE_386
+    movzx   ax, [es:si+ATA1.bPioMode]   ; AH = 0, AL = PIO mode 0, 1 or 2
+%else
+    mov     al, [es:si+ATA1.bPioMode]
+    cbw
+%endif
+    mov     bx, ax
+    eSHL_IM bx, 1                       ; Shift for WORD lookup
     mov     cx, [cs:bx+.rgwPio0to2CycleTimeInNanosecs]
 
     ; Check if IORDY is supported
     test    BYTE [es:si+ATA2.wCaps+1], A2_wCaps_IORDY >> 8
-    jz      SHORT .ReturnPioTimings ; No PIO 3 or higher if no IORDY
-    mov     ah, FLGH_DPT_IORDY
+    jz      SHORT .ReturnPioTimings     ; No PIO 3 or higher if no IORDY
+    mov     ah, FLGH_DPT_IORDY          ; *FIXME* Actually, CF specification v4.1 says that use of IORDY is invalid for PIO modes 5 and 6.
 
     ; Check if Advanced PIO modes are supported (3 and above)
@@ -187 +192 @@
     jz      SHORT .ReturnPioTimings
 
-    ; Get Advanced PIO mode
-    ; (Hard Disks supports up to 4 but CF cards can support 5 and 6)
-    mov     bl, [es:si+ATA2.bPIOSupp]
+    ; Get Advanced PIO mode (Hard Disks supports up to 4 but CF cards can support 5 and 6)
+    or      bh, [es:si+ATA2.bPIOSupp]
+    jz      SHORT .ReturnPioTimings
 .CheckNextFlag:
     inc     ax
-    shr     bl, 1
+    shr     bh, 1
     jnz     SHORT .CheckNextFlag
     MIN_U   al, 6                       ; Make sure not above lookup tables

trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectPrint.asm

@@ -150 +150 @@
     push    bp
     mov     bp, sp
+%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
+%if DRVDETECTINFO.szDrvName = 0
+    push    bx
+%else
     lea     si, [bx+DRVDETECTINFO.szDrvName]
     push    si
+%endif
+%endif
     mov     si, g_szDriveName
     jmp     SHORT DetectPrint_FormatCSSIfromParamsInSSBP

trunk/XTIDE_Universal_BIOS/Src/Initialization/FloppyDrive.asm

@@ -190 +190 @@
     LOAD_BDA_SEGMENT_TO ds, ax
     mov     al, [BDA.wEquipment]    ; Load Equipment WORD low byte
+    and     al, 0C1h                ; Leave bits 7..6 and 0
+    eAAM    64
+    add     al, ah                  ; AL = Floppy Drive count
     pop     ds
-
-%ifdef USE_UNDOC_INTEL
-    and     al, 0C1h
-    eAAM    64
-%else
-    mov     ah, al                  ; Copy it to AH
-    and     ax, 0C001h              ; Leave bits 15..14 and 0
-    eROL_IM ah, 2                   ; EW low byte bits 7..6 to 1..0
-%endif ; USE_UNDOC_INTEL
-
-    add     al, ah                  ; AL = Floppy Drive count
 %endif ; USE_AT
 

trunk/XTIDE_Universal_BIOS/Src/Initialization/Interrupts.asm

@@ -239 +239 @@
 .ClearBitFrom8259MaskRegister:
     push    cx
-    xchg    ax, cx              ; IRQ index to CL
+    xchg    cx, ax              ; IRQ index to CL
+    in      al, dx              ; Read Interrupt Mask Register
     mov     ch, ~1              ; Load bit mask to be rotated
     rol     ch, cl              ; Rotate mask to correct position for clearing
-    in      al, dx              ; Read Interrupt Mask Register
     and     al, ch              ; Clear wanted bit
     out     dx, al              ; Write modified Interrupt Mask Register

trunk/XTIDE_Universal_BIOS/Src/Main.asm

@@ -32 +32 @@
 
     ; We must define included libraries before including "AssemblyLibrary.inc".
-%define EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS   ; Exclude unused library functions
+%define EXCLUDE_FROM_XUB                    ; Exclude unused library functions
 %ifdef MODULE_BOOT_MENU
     %define MENUEVENT_INLINE_OFFSETS        ; Only one menu required, save space and inline offsets
@@ -81 +81 @@
 %ifdef MODULE_BOOT_MENU
     at  ROMVARS.wBootTimeout,   dw  BOOT_MENU_DEFAULT_TIMEOUT
+    at  ROMVARS.pColorTheme,    dw  ColorTheme              ; Offset to the ATTRIBUTE_CHARS struc that holds the color theme
 %endif
     at  ROMVARS.bIdeCnt,        db  2                       ; Number of supported controllers
@@ -105 +106 @@
     at  ROMVARS.ideVars2+IDEVARS.wControlBlockPort, dw  DEVICE_ATA_TERTIARY_PORTCTRL
     at  ROMVARS.ideVars2+IDEVARS.bDevice,           db  DEVICE_16BIT_ATA
-    at  ROMVARS.ideVars2+IDEVARS.bIRQ,              db  0
+    at  ROMVARS.ideVars2+IDEVARS.bIRQ,              db  0   ; Should be 11 on the GSI Inc. Model 2C
     at  ROMVARS.ideVars2+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
     at  ROMVARS.ideVars2+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
@@ -112 +113 @@
     at  ROMVARS.ideVars3+IDEVARS.wControlBlockPort, dw  DEVICE_ATA_QUATERNARY_PORTCTRL
     at  ROMVARS.ideVars3+IDEVARS.bDevice,           db  DEVICE_16BIT_ATA
-    at  ROMVARS.ideVars3+IDEVARS.bIRQ,              db  0
+    at  ROMVARS.ideVars3+IDEVARS.bIRQ,              db  0   ; Should be 10 on the GSI Inc. Model 2C
     at  ROMVARS.ideVars3+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
     at  ROMVARS.ideVars3+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
@@ -127 +128 @@
 %ifdef MODULE_BOOT_MENU
     at  ROMVARS.wBootTimeout,   dw  BOOT_MENU_DEFAULT_TIMEOUT
+    at  ROMVARS.pColorTheme,    dw  ColorTheme              ; Offset to the ATTRIBUTE_CHARS struc that holds the color theme
 %endif
     at  ROMVARS.bIdeCnt,        db  1
@@ -301 +303 @@
 
 
+%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
 ; Although it's very unlikely to happen, we give warnings for builds that cannot be automatically checksummed due to the size being too large.
 ; In some cases it's theoretically possible to checksum the build anyway (manually) which is why these are warnings and not errors.
@@ -309 +312 @@
         %endif
     %endif
-%elif ($-$$) = BIOS_SIZE            ; A large build.
+%elif ($-$$) = BIOS_SIZE            ; A large or tiny build.
     %warning "This build is too large to be auto-checksummed!"
 %endif
+%endif

trunk/XTIDE_Universal_BIOS/Src/Menus/BootMenu/BootMenuEvent.asm

@@ -141 +141 @@
 
     ; Store default Menuitem (=default drive to boot from)
-    eMOVZX  dx, BYTE [cs:ROMVARS.bBootDrv]
+    eMOVZX  dx, [cs:ROMVARS.bBootDrv]
     call    GetMenuitemToDXforDriveInDL
     mov     [bp+MENUINIT.wHighlightedItem], dx

trunk/XTIDE_Universal_BIOS/Src/Menus/BootMenu/BootMenuPrint.asm

@@ -54 +54 @@
     test    dl, dl
     js      SHORT .go
-    mov     bl, ((g_szFloppyDrv)-$$ & 0xff)         ; and revisit the earlier assumption...
+    mov     bl, (g_szFloppyDrv - $$) & 0xff         ; and revisit the earlier assumption...
 
 .go:

trunk/XTIDE_Universal_BIOS/Src/Menus/BootMenu/BootMenuPrintCfg.asm

@@ -63 +63 @@
     ;; with AL clear, and so we exchange AL and AH after the multiply for the final result.
     ;;
+%ifdef USE_186
+    imul    ax, g_szAddressingModes_Displacement << (8-TRANSLATEMODE_FIELD_POSITION)
+%else
     mov     cx, g_szAddressingModes_Displacement << (8-TRANSLATEMODE_FIELD_POSITION)
     mul     cx
+%endif
     xchg    al, ah      ; AL = always zero after above multiplication
     add     ax, g_szAddressingModes

trunk/XTIDE_Universal_BIOS/Src/Menus/HotkeyBar.asm

@@ -407 +407 @@
     sbb     di, BYTE 1              ; Sub CF if Floppy Drive
     xchg    ax, cx
-    mov     [es:di], al
+    stosb
     stc                             ; Valid hotkey scancode returned in AL
 

trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/AtaGeometry.asm

@@ -114 +114 @@
     ; slower. The speed difference doesn't matter on AT systems.
 .UseAssistedLBA:
-    call    GetSectorCountToDXAXfromCHSinAXBLBH
-    call    ConvertChsSectorCountFromDXAXtoLbaAssistedLCHSinAXBLBH
-    xor     cx, cx      ; No bits to shift
+    ; Fall to GetSectorCountToDXAXfromCHSinAXBLBH
+
+
+;--------------------------------------------------------------------
+; GetSectorCountToDXAXfromCHSinAXBLBH
+;   Parameters:
+;       AX:     Number of cylinders (1...16383)
+;       BL:     Number of heads (1...255)
+;       BH:     Number of sectors per track (1...63)
+;   Returns:
+;       DX:AX:  Total number of CHS addressable sectors
+;   Corrupts registers:
+;       BX
+;--------------------------------------------------------------------
+GetSectorCountToDXAXfromCHSinAXBLBH:
+    xchg    ax, bx
+    mul     ah          ; AX = Heads * Sectors per track
+    mul     bx
+    ; Fall to ConvertChsSectorCountFromDXAXtoLbaAssistedLCHSinAXBLBH
+
+
+;--------------------------------------------------------------------
+; LBA assist calculation (or Assisted LBA)
+;
+; This algorithm translates P-CHS sector count up to largest possible
+; L-CHS sector count (1024, 255, 63). Note that INT 13h interface allows
+; 256 heads but DOS supports up to 255 head. That is why BIOSes never
+; use 256 heads.
+;
+; L-CHS parameters generated here require the drive to use LBA addressing.
+;
+; Here is the algorithm:
+; If cylinders > 8192
+;  Variable CH = Total CHS Sectors / 63
+;  Divide (CH - 1) by 1024 and add 1
+;  Round the result up to the nearest of 16, 32, 64, 128 and 255. This is the value to be used for the number of heads.
+;  Divide CH by the number of heads. This is the value to be used for the number of cylinders.
+;
+; ConvertChsSectorCountFromDXAXtoLbaAssistedLCHSinAXBLBH:
+;   Parameters:
+;       DX:AX:  Total number of P-CHS sectors for CHS addressing
+;               (max = 16383 * 16 * 63 = 16,514,064)
+;   Returns:
+;       AX:     Number of cylinders (?...1027)
+;       BL:     Number of heads (16, 32, 64, 128 or 255)
+;       BH:     Number of sectors per track (always 63)
+;       CX:     Number of bits shifted (0)
+;       DL:     TRANSLATEMODE_ASSISTED_LBA
+;   Corrupts registers:
+;       DH
+;--------------------------------------------------------------------
+ConvertChsSectorCountFromDXAXtoLbaAssistedLCHSinAXBLBH:
+    ; Value CH = Total sector count / 63
+    ; Max = 16,514,064 / 63 = 262128
+    mov     cx, LBA_ASSIST_SPT          ; CX = 63
+
+    ; --- Math_DivDXAXbyCX inlined (and slightly modified) since it's only used here
+    xor     bx, bx
+    xchg    bx, ax
+    xchg    dx, ax
+    div     cx
+    xchg    ax, bx
+    div     cx
+    mov     dx, bx
+    ; ---
+
+    push    ax
+    push    dx                          ; Value CH stored for later use
+
+    ; BX:DX:AX = Value CH - 1
+    ; Max = 262128 - 1 = 262127
+    xor     bx, bx
+    sub     ax, BYTE 1
+    sbb     dx, bx
+
+    ; AX = Number of heads = ((Value CH - 1) / 1024) + 1
+    ; Max = (262127 / 1024) + 1 = 256
+    call    Size_DivideSizeInBXDXAXby1024   ; Preserves CX and returns with BH cleared
+    pop     dx
+    inc     ax                          ; + 1
+
+    ; Heads must be 16, 32, 64, 128 or 255 (round up to the nearest)
+    ; Max = 255
+    mov     bl, 16                      ; Min number of heads
+.CompareNextValidNumberOfHeads:
+    cmp     ax, bx
+    jbe     SHORT .NumberOfHeadsNowInBX
+    eSHL_IM bx, 1                       ; Double number of heads
+    jpo     SHORT .CompareNextValidNumberOfHeads    ; Reached 256 heads?
+    dec     bx                          ;  If so, limit heads to 255
+.NumberOfHeadsNowInBX:
+
+    ; DX:AX = Number of cylinders = Value CH (without - 1) / number of heads
+    ; Max = 262128 / 255 = 1027
+    pop     ax                          ; Value CH back to DX:AX
+    div     bx
+
+    xchg    bh, cl                      ; Sectors per Track to BH, zero to CL (CX)
     mov     dl, TRANSLATEMODE_ASSISTED_LBA
+ReturnLCHSinAXBLBH:
     ret
 
@@ -136 +232 @@
     mov     bl, [es:si+ATA1.wHeadCnt]   ; Heads (1...16)
     mov     bh, [es:si+ATA1.wSPT]       ; Sectors per Track (1...63)
-    ret
-
-
-;--------------------------------------------------------------------
-; GetSectorCountToDXAXfromCHSinAXBLBH
-;   Parameters:
-;       AX:     Number of cylinders (1...16383)
-;       BL:     Number of heads (1...255)
-;       BH:     Number of sectors per track (1...63)
-;   Returns:
-;       DX:AX:  Total number of CHS addressable sectors
-;   Corrupts registers:
-;       BX
-;--------------------------------------------------------------------
-GetSectorCountToDXAXfromCHSinAXBLBH:
-    xchg    ax, bx
-    mul     ah          ; AX = Heads * Sectors per track
-    mul     bx
     ret
 
@@ -175 +253 @@
 ;  Do a standard ECHS translation
 ;
+; *FIXME* The above algorithm seems to be conflicting with info found here
+; https://web.archive.org/web/20000817071418/http://www.firmware.com:80/support/bios/over4gb.htm
+; which says that Revised ECHS is used when the cylinder count is > 8191.
+;
 ; ConvertPCHfromAXBLtoRevisedEnhancedCHinAXBL:
 ;   Parameters:
@@ -183 +265 @@
 ;       BL:     Number of L-CHS heads (?...240)
 ;       CX:     Number of bits shifted (0...3)
-;       DX:     ADDRESSING_MODE_NORMAL or ADDRESSING_MODE_LARGE
+;       DX:     TRANSLATEMODE_NORMAL or TRANSLATEMODE_LARGE
 ;   Corrupts registers:
 ;       Nothing
@@ -271 +353 @@
     ret
 
-
-;--------------------------------------------------------------------
-; LBA assist calculation (or Assisted LBA)
-;
-; This algorithm translates P-CHS sector count up to largest possible
-; L-CHS sector count (1024, 255, 63). Note that INT 13h interface allows
-; 256 heads but DOS supports up to 255 head. That is why BIOSes never
-; use 256 heads.
-;
-; L-CHS parameters generated here require the drive to use LBA addressing.
-;
-; Here is the algorithm:
-; If cylinders > 8192
-;  Variable CH = Total CHS Sectors / 63
-;  Divide (CH – 1) by 1024 and add 1
-;  Round the result up to the nearest of 16, 32, 64, 128 and 255. This is the value to be used for the number of heads.
-;  Divide CH by the number of heads. This is the value to be used for the number of cylinders.
-;
-; ConvertChsSectorCountFromDXAXtoLbaAssistedLCHSinAXBLBH:
-;   Parameters:
-;       DX:AX:  Total number of P-CHS sectors for CHS addressing
-;               (max = 16383 * 16 * 63 = 16,514,064)
-;   Returns:
-;       AX:     Number of cylinders (?...1027)
-;       BL:     Number of heads (16, 32, 64, 128 or 255)
-;       BH:     Number of sectors per track (always 63)
-;   Corrupts registers:
-;       CX, DX
-;--------------------------------------------------------------------
-ConvertChsSectorCountFromDXAXtoLbaAssistedLCHSinAXBLBH:
-    ; Value CH = Total sector count / 63
-    ; Max = 16,514,064 / 63 = 262128
-    mov     cx, LBA_ASSIST_SPT          ; CX = 63
-    call    Math_DivDXAXbyCX            ; Preserves CX
-    push    dx
-    push    ax                          ; Value CH stored for later use
-
-    ; BX:DX:AX = Value CH - 1
-    ; Max = 262128 - 1 = 262127
-    xor     bx, bx
-    sub     ax, BYTE 1
-    sbb     dx, bx
-
-    ; AX = Number of heads = ((Value CH - 1) / 1024) + 1
-    ; Max = (262127 / 1024) + 1 = 256
-    call    Size_DivideSizeInBXDXAXby1024   ; Preserves CX
-    inc     ax                          ; + 1
-
-    ; Heads must be 16, 32, 64, 128 or 255 (round up to the nearest)
-    ; Max = 255
-    mov     cl, 16                      ; Min number of heads
-.CompareNextValidNumberOfHeads:
-    cmp     ax, cx
-    jbe     SHORT .NumberOfHeadsNowInCX
-    eSHL_IM cx, 1                       ; Double number of heads
-    jpo     SHORT .CompareNextValidNumberOfHeads    ; Reached 256 heads?
-    dec     cx                          ;  If so, limit heads to 255
-.NumberOfHeadsNowInCX:
-    mov     bx, cx                      ; Number of heads are returned in BL
-    mov     bh, LBA_ASSIST_SPT          ; Sectors per Track
-
-    ; DX:AX = Number of cylinders = Value CH (without - 1) / number of heads
-    ; Max = 262128 / 255 = 1027
-    pop     ax
-    pop     dx                          ; Value CH back to DX:AX
-    div     cx
-
-    ; Return L-CHS
-ReturnLCHSinAXBLBH:
-    ret

trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/DrvDetectInfo.asm

@@ -46 +46 @@
 
     add     si, BYTE ATA1.strModel              ; DS:SI now points drive name (Clears CF)
+%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
 %if DRVDETECTINFO.szDrvName = 0
     mov     di, bx
 %else
     lea     di, [bx+DRVDETECTINFO.szDrvName]    ; ES:DI now points to name destination
+%endif
 %endif
     mov     cx, MAX_HARD_DISK_NAME_LENGTH / 2   ; Max number of WORDs allowed
@@ -78 +80 @@
 ;--------------------------------------------------------------------
 DriveDetectInfo_ConvertDPTtoBX:
+%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
 %if DPT_DRVDETECTINFO_SIZE_MULTIPLIER = 2
 %if BOOTVARS.rgDrvDetectInfo & 1                    ; Should never be odd but better safe than sorry
-    lea     ax, [di-RAMVARS_size]
-    eSHL_IM ax, 1
-    add     ax, BOOTVARS.rgDrvDetectInfo
+    lea     bx, [di-RAMVARS_size]
+    eSHL_IM bx, 1
+    add     bx, BOOTVARS.rgDrvDetectInfo
 %else
-    lea     ax, [di-RAMVARS_size+(BOOTVARS.rgDrvDetectInfo/2)]
-;   eSHL_IM ax, 1                                   ; *FIXME* For some reason this will cause NASM to crap itself.
-    shl     ax, 1                                   ; So this will have to suffice for now.
+    lea     bx, [di-RAMVARS_size+(BOOTVARS.rgDrvDetectInfo/2)]
+    eSHL_IM bx, 1
 %endif
+%else
+%ifdef USE_186
+    lea     bx, [di-RAMVARS_size]
+    imul    bx, DPT_DRVDETECTINFO_SIZE_MULTIPLIER
+    add     bx, BOOTVARS.rgDrvDetectInfo
 %else
     lea     ax, [di-RAMVARS_size]                   ; subtract off base of DPTs
@@ -93 +100 @@
     mul     bl
     add     ax, BOOTVARS.rgDrvDetectInfo            ; add base of DRVDETECTINFO
+    xchg    bx, ax
 %endif
-    xchg    bx, ax
+%endif
+%endif
     ret

trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/RamVars.asm

@@ -31 +31 @@
 ;       DS:     RAMVARS segment
 ;   Corrupts registers:
-;       AX, CX, DI
+;       AX, CX, DX, DI
 ;--------------------------------------------------------------------
 RamVars_Initialize:
     push    es
-    ; Fall to .StealMemoryForRAMVARS
 
-;--------------------------------------------------------------------
-; .StealMemoryForRAMVARS
-;   Parameters:
-;       Nothing
-;   Returns:
-;       DS:     RAMVARS segment
-;   Corrupts registers:
-;       AX, CL
-;--------------------------------------------------------------------
-.StealMemoryForRAMVARS:
 %ifndef USE_AT
     mov     ax, LITE_MODE_RAMVARS_SEGMENT
@@ -56 +45 @@
     mov     al, [cs:ROMVARS.bStealSize]
     sub     [BDA.wBaseMem], ax
-    mov     ax, [BDA.wBaseMem]
 %ifdef USE_186
-    shl     ax, 6                       ; Segment to first stolen kB (*=40h)
+    imul    ax, [BDA.wBaseMem], 64
 %else
-    mov     cl, 6
-    shl     ax, cl
+    mov     al, 64
+    mul     WORD [BDA.wBaseMem]
 %endif
-    ; Fall to .InitializeRamvars
 
-;--------------------------------------------------------------------
-; .InitializeRamvars
-;   Parameters:
-;       AX:     RAMVARS segment
-;   Returns:
-;       DS:     RAMVARS segment
-;   Corrupts registers:
-;       AX, CX, DI, ES
-;--------------------------------------------------------------------
 .InitializeRamvars:
+    xor     di, di
     mov     ds, ax
     mov     es, ax
     mov     cx, RAMVARS_size
-    xor     di, di
     call    Memory_ZeroESDIwithSizeInCX
     mov     WORD [RAMVARS.wDrvDetectSignature], RAMVARS_DRV_DETECT_SIGNATURE
@@ -121 +99 @@
 .GetStolenSegmentToDS:
     LOAD_BDA_SEGMENT_TO ds, di
+;%ifdef USE_186
+;   imul    di, [BDA.wBaseMem], 64  ; 2 bytes less but slower, especially on 386/486 processors
+;%else
     mov     di, [BDA.wBaseMem]      ; Load available base memory size in kB
     eSHL_IM di, 6                   ; Segment to first stolen kB (*=40h)
+;%endif
 ALIGN JUMP_ALIGN
 .LoopStolenKBs:

trunk/XTIDE_Universal_BIOS/makefile

@@ -41 +41 @@
 # USE_AT                      Use features supported on AT and later systems (not available on XT) #
 # USE_UNDOC_INTEL             Optimizations for Intel CPU:s - do NOT use on NEC V20/V30/Sony CPU:s #
+# CLD_NEEDED                  Only needed for compatibility with buggy software/BIOSes             #
 #                                                                                                  #
 # ** AT Builds only (when USE_AT is defined)                                                       #
@@ -103 +104 @@
 # Assembler preprocessor defines.                               #
 #################################################################
-DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_EBIOS MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_POWER_MANAGEMENT RESERVE_DIAGNOSTIC_CYLINDER NO_ATAID_VALIDATION
+DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_EBIOS MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_POWER_MANAGEMENT RESERVE_DIAGNOSTIC_CYLINDER NO_ATAID_VALIDATION CLD_NEEDED
 DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE_ADVANCED MODULE_COMPATIBLE_TABLES
 
@@ -114 +115 @@
 DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
 
-DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE NO_ATAID_VALIDATION
+DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE NO_ATAID_VALIDATION CLD_NEEDED
 DEFINES_386_8K = $(DEFINES_AT) USE_386 MODULE_ADVANCED_ATA
 
@@ -125 +126 @@
 ###################
 
-# Target size of the ROM, used in main.asm for number of 512B blocks and by checksum Perl script below
-BIOS_SIZE = 8192        # For BIOS header (use even multiplier!)
-ROMSIZE = $(BIOS_SIZE)  # Size of binary to build when building with make checksum
-BIOS_SIZE_LARGE = 12288
-ROMSIZE_LARGE = $(BIOS_SIZE_LARGE)
+# Target size of the BIOS, used in main.asm for number of 512B blocks (CNT_ROM_BLOCKS) and by checksum Perl script below ('make checksum').
+# Note! The size must be a multiple of 2 KB for compatibility reasons.
+BIOS_SIZE_TINY = 4096
+BIOS_SIZE_SMALL = 8192
+BIOS_SIZE_LARGE = 10240
 
 # Add -D in front of every preprocessor define declaration
-DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
-DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
-DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
+DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
+DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
+DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
 DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
 DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
 DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
-DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
-DEFS_386_8K = $(DEFINES_386_8K:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
+DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_TINY)
+DEFS_386_8K = $(DEFINES_386_8K:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
 DEFS_ALL_FEATURES = $(DEFINES_ALL_FEATURES:%=-D%)
 
@@ -220 +221 @@
 strings: src\Strings.asm
     @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
-    @perl ..\tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
+    @perl ..\Tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
     @echo StringsCompressed.asm updated!
 
@@ -228 +229 @@
 
 checksum: all
-    @perl ..\tools\checksum.pl $(TARGET)_tiny.bin $(ROMSIZE)
-    @perl ..\tools\checksum.pl $(TARGET)_xt.bin $(ROMSIZE)
-    @perl ..\tools\checksum.pl $(TARGET)_xtp.bin $(ROMSIZE)
-    @perl ..\tools\checksum.pl $(TARGET)_at.bin $(ROMSIZE)
-    @perl ..\tools\checksum.pl $(TARGET)_xtl.bin $(ROMSIZE_LARGE)
-    @perl ..\tools\checksum.pl $(TARGET)_xtpl.bin $(ROMSIZE_LARGE)
-    @perl ..\tools\checksum.pl $(TARGET)_atl.bin $(ROMSIZE_LARGE)
-    @perl ..\tools\checksum.pl $(TARGET)_386.bin $(ROMSIZE)
+    @perl ..\Tools\checksum.pl $(TARGET)_tiny.bin $(BIOS_SIZE_TINY)
+    @perl ..\Tools\checksum.pl $(TARGET)_xt.bin $(BIOS_SIZE_SMALL)
+    @perl ..\Tools\checksum.pl $(TARGET)_xtp.bin $(BIOS_SIZE_SMALL)
+    @perl ..\Tools\checksum.pl $(TARGET)_at.bin $(BIOS_SIZE_SMALL)
+    @perl ..\Tools\checksum.pl $(TARGET)_xtl.bin $(BIOS_SIZE_LARGE)
+    @perl ..\Tools\checksum.pl $(TARGET)_xtpl.bin $(BIOS_SIZE_LARGE)
+    @perl ..\Tools\checksum.pl $(TARGET)_atl.bin $(BIOS_SIZE_LARGE)
+    @perl ..\Tools\checksum.pl $(TARGET)_386.bin $(BIOS_SIZE_SMALL)
 
 unused:
@@ -241 +242 @@
     @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -l"$(TARGET)_unused.lst"
     @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
-    @perl ..\tools\unused.pl $(TARGET)_unused.lst $(TARGET)_unused.asm
+    @perl ..\Tools\unused.pl $(TARGET)_unused.lst $(TARGET)_unused.asm
     @echo "XT Small"
     @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst"
     @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
-    @perl ..\tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm
+    @perl ..\Tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm
     @echo "XT Large"
     @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst"
     @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
-    @perl ..\tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm
+    @perl ..\Tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm
     @echo "AT Small"
     @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst"
     @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
-    @perl ..\tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm
+    @perl ..\Tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm
     @echo "AT Large"
     @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst"
     @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
-    @perl ..\tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm
-
-
+    @perl ..\Tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm
+
+

trunk/XTIDE_Universal_BIOS_Configurator_v2/Inc/Variables.inc

@@ -34 +34 @@
 struc CFGVARS
     .pMenupage          resb    2           ; Offset to MENUPAGE to display
-    .wFlags             resb    2           ; Program flags
+    .wFlags             resb    2           ; Program flags - Only the low byte is used currently and code depend on this
     .wImageSizeInWords  resb    2           ; Size in words for loaded ROM or FILE
     .wEepromSegment     resb    2           ; Segment where EEPROM is located
@@ -44 +44 @@
 endstruc
 
-; Bit defines for CFGVARS.wFlags
+; Bit defines for CFGVARS.wFlags (changes here might require changes elsewhere)
 FLG_CFGVARS_FILELOADED  EQU     (1<<0)  ; BIOS is loaded from file
 FLG_CFGVARS_ROMLOADED   EQU     (1<<1)  ; BIOS is loaded from EEPROM

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/AutoConfigure.asm

@@ -43 +43 @@
     call    ResetIdevarsToDefaultValues
     call    DetectIdePortsAndDevices
-    call    EnableInterruptsForPrimaryAndSecondaryControllers
+    call    EnableInterruptsForAllStandardControllers
     call    StoreAndDisplayNumberOfControllers
 
@@ -55 +55 @@
 ;   Parameters:
 ;       DS:DI:  Ptr to ROMVARS
+;       ES:DI:  Ptr to ROMVARS
 ;   Returns:
 ;       Nothing
@@ -123 +124 @@
 
 ;--------------------------------------------------------------------
-; EnableInterruptsForPrimaryAndSecondaryControllers
+; EnableInterruptsForAllStandardControllers
 ;   Parameters:
 ;       DS:DI:  Ptr to ROMVARS
@@ -130 +131 @@
 ;       Nothing
 ;   Corrupts registers:
-;       AX, ES
-;--------------------------------------------------------------------
-ALIGN JUMP_ALIGN
-EnableInterruptsForPrimaryAndSecondaryControllers:
+;       AX
+;--------------------------------------------------------------------
+ALIGN JUMP_ALIGN
+EnableInterruptsForAllStandardControllers:
     jcxz    .NoControllersDetected
     call    Buffers_IsXTbuildLoaded
@@ -148 +149 @@
     inc     ax  ; 15
     cmp     WORD [di+IDEVARS.wBasePort], DEVICE_ATA_SECONDARY_PORT
+
+%if 0
+    je      SHORT .EnableIrqAL
+
+    ; Defaults on the GSI Inc. Model 2C EIDE controller
+    mov     al, 11
+    cmp     WORD [di+IDEVARS.wBasePort], DEVICE_ATA_TERTIARY_PORT
+    je      SHORT .EnableIrqAL
+
+    dec     ax  ; 10
+    cmp     WORD [di+IDEVARS.wBasePort], DEVICE_ATA_QUATERNARY_PORT
+%endif
+
     jne     SHORT .DoNotEnableIRQ
 
@@ -153 +167 @@
     mov     [di+IDEVARS.bIRQ], al
 .DoNotEnableIRQ:
+    add     di, IDEVARS_size
     loop    .CheckNextController
     pop     cx

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/BiosFile.asm

@@ -44 +44 @@
     call    FileIO_CloseUsingHandleFromBX
     call    DisplayFileLoadedSuccessfully
-    jmp     SHORT .Return
+    pop     ds
+    ret
 
 .DisplayErrorMessage:
     call    FileIO_CloseUsingHandleFromBX
     call    DisplayFailedToLoadFile
-ALIGN JUMP_ALIGN
-.Return:
     pop     ds
     ret
@@ -117 +116 @@
     pop     es
     mov     di, g_cfgVars+CFGVARS.szOpenedFile
+%ifdef CLD_NEEDED
     cld
+%endif
     call    String_CopyDSSItoESDIandGetLengthToCX
     clc

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Buffers.asm

@@ -49 +49 @@
 ALIGN JUMP_ALIGN
 Buffers_IsXtideUniversalBiosLoaded:
-    test    WORD [cs:g_cfgVars+CFGVARS.wFlags], FLG_CFGVARS_FILELOADED | FLG_CFGVARS_ROMLOADED
+    test    BYTE [cs:g_cfgVars+CFGVARS.wFlags], FLG_CFGVARS_FILELOADED | FLG_CFGVARS_ROMLOADED
     jnz     SHORT .FileOrBiosLoaded
-    or      cl, 1       ; Clear ZF
+    test    sp, sp      ; Clear ZF
     ret
 
@@ -76 +76 @@
     add     di, BYTE ROMVARS.rgbSign
     mov     cx, XTIDE_SIGNATURE_LENGTH / 2
+%ifdef CLD_NEEDED
     cld
+%endif
     eSEG_STR repe, cs, cmpsw
 
@@ -91 +93 @@
 ;               Cleared if some other (AT, 386) build is loaded
 ;   Corrupts registers:
-;       DI, ES
+;       Nothing
 ;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
 Buffers_IsXTbuildLoaded:
 %strlen BUILD_TYPE_OFFSET   TITLE_STRING_START
+    push    es
+    push    di
     call    Buffers_GetFileBufferToESDI
     cmp     WORD [es:di+ROMVARS.szTitle+BUILD_TYPE_OFFSET+1], 'XT'  ; +1 is for '('
+    pop     di
+    pop     es
     ret
 %undef BUILD_TYPE_OFFSET
@@ -105 +111 @@
 ; Buffers_NewBiosWithSizeInDXCXandSourceInAXhasBeenLoadedForConfiguration
 ;   Parameters:
-;       AX:     EEPROM source (FLG_CFGVARS_FILELOADED or FLG_CFGVARS_ROMLOADED)
+;       AL:     EEPROM source (FLG_CFGVARS_FILELOADED or FLG_CFGVARS_ROMLOADED)
 ;       DX:CX:  EEPROM size in bytes
 ;   Returns:
 ;       Nothing
 ;   Corrupts registers:
-;       AX, CX, DX
+;       CX, DX
 ;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
 Buffers_NewBiosWithSizeInDXCXandSourceInAXhasBeenLoadedForConfiguration:
-    and     WORD [cs:g_cfgVars+CFGVARS.wFlags], ~(FLG_CFGVARS_FILELOADED | FLG_CFGVARS_ROMLOADED | FLG_CFGVARS_UNSAVED)
-    or      WORD [cs:g_cfgVars+CFGVARS.wFlags], ax
+    and     BYTE [cs:g_cfgVars+CFGVARS.wFlags], ~(FLG_CFGVARS_FILELOADED | FLG_CFGVARS_ROMLOADED | FLG_CFGVARS_UNSAVED)
+    or      [cs:g_cfgVars+CFGVARS.wFlags], al
     shr     dx, 1
     rcr     cx, 1
@@ -135 +141 @@
 ALIGN JUMP_ALIGN
 Buffers_SetUnsavedChanges:
-    or      WORD [cs:g_cfgVars+CFGVARS.wFlags], FLG_CFGVARS_UNSAVED
+    or      BYTE [cs:g_cfgVars+CFGVARS.wFlags], FLG_CFGVARS_UNSAVED
     ret
 
 ALIGN JUMP_ALIGN
 Buffers_ClearUnsavedChanges:
-    and     WORD [cs:g_cfgVars+CFGVARS.wFlags], ~FLG_CFGVARS_UNSAVED
+    and     BYTE [cs:g_cfgVars+CFGVARS.wFlags], ~FLG_CFGVARS_UNSAVED
     ret
 
@@ -155 +161 @@
 ALIGN JUMP_ALIGN
 Buffers_SaveChangesIfFileLoaded:
-    mov     ax, [cs:g_cfgVars+CFGVARS.wFlags]
-    and     ax, BYTE (FLG_CFGVARS_FILELOADED | FLG_CFGVARS_UNSAVED)
-    cmp     ax, BYTE (FLG_CFGVARS_FILELOADED | FLG_CFGVARS_UNSAVED)
-    jne     SHORT .NothingToSave
-    call    Dialogs_DisplaySaveChangesDialog
+    mov     al, [cs:g_cfgVars+CFGVARS.wFlags]
+    and     al, FLG_CFGVARS_FILELOADED | FLG_CFGVARS_UNSAVED
+    jz      SHORT .NothingToSave
+    jpo     SHORT .NothingToSave
+    mov     bx, g_szDlgSaveChanges
+    call    Dialogs_DisplayYesNoResponseDialogWithTitleStringInBX
     jnz     SHORT .NothingToSave
     jmp     BiosFile_SaveUnsavedChanges
@@ -181 +188 @@
 
     eMOVZX  di, [cs:g_cfgVars+CFGVARS.bEepromType]
-    mov     cx, [cs:di+g_rgwEepromTypeToSizeInWords]
+;%if g_rgwEepromTypeToSizeInWords = 0   ; *FIXME* It really is but NASM won't accept this.
+    mov     cx, [cs:di]
+;%else
+;   mov     cx, [cs:di+g_rgwEepromTypeToSizeInWords]
+;%endif
     sub     cx, [cs:g_cfgVars+CFGVARS.wImageSizeInWords]    ; CX = WORDs to append
     jbe     SHORT .NoNeedToAppendZeroes
@@ -187 +198 @@
     call    Buffers_GetFileBufferToESDI
     mov     ax, [cs:g_cfgVars+CFGVARS.wImageSizeInWords]
-    shl     ax, 1
+    eSHL_IM ax, 1
     add     di, ax          ; ES:DI now point first unused image byte
     xor     ax, ax
+%ifdef CLD_NEEDED
     cld
+%endif
     rep stosw
 ALIGN JUMP_ALIGN
@@ -214 +227 @@
     call    Buffers_GetFileBufferToESDI
     call    EEPROM_GetXtideUniversalBiosSizeFromESDItoDXCX
+%ifdef CLD_NEEDED
+    cld
+%endif
 
 ; Compatibility fix for 3Com 3C503 cards where the ASIC returns 8080h as the last two bytes of the ROM.
@@ -223 +239 @@
     jne     SHORT .BiosSizeIsNot8K
     ; The BIOS size is 8K and therefore a potential candidate for a 3Com 3C503 card.
-    dec     cx
-    dec     cx
+    mov     cl, (8192 - 3) & 0FFh
     mov     ah, 3
 ALIGN JUMP_ALIGN
@@ -230 +245 @@
 .SumNextByte:
     add     al, [es:di]
-.NextChecksumByte:
     inc     di
     loop    .SumNextByte
+.NextChecksumByte:
     neg     al
-    mov     [es:di], al
-    inc     cx
+    stosb
     dec     ah
     jnz     SHORT .NextChecksumByte
@@ -306 +320 @@
 
 ;--------------------------------------------------------------------
-; Buffers_GetFileBufferToESDI
 ; Buffers_GetFlashComparisonBufferToESDI
 ; Buffers_GetFileDialogItemBufferToESDI
+; Buffers_GetFileBufferToESDI
 ;   Parameters:
 ;       Nothing
@@ -320 +334 @@
 Buffers_GetFileDialogItemBufferToESDI:
     call    Buffers_GetFileBufferToESDI
-    push    di
     mov     di, es
-    add     di, 1000h       ; Third 64k page
-    mov     es, di
-    pop     di
-    ret
-ALIGN JUMP_ALIGN
+    SKIP2B  f
 Buffers_GetFileBufferToESDI:
     mov     di, cs

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Dialogs.asm

@@ -41 +41 @@
     mov     cx, DIALOG_INPUT_size
     call    Memory_ReserveCXbytesFromStackToDSSI
-    call    InitializeDialogInputFromDSSI
     mov     [si+DIALOG_INPUT.fszTitle], di
     jmp     SHORT DisplayMessageDialogWithMessageInCSDXandDialogInputInDSSI
@@ -65 +64 @@
     mov     cx, DIALOG_INPUT_size
     call    Memory_ReserveCXbytesFromStackToDSSI
-    call    InitializeDialogInputFromDSSI
     mov     WORD [si+DIALOG_INPUT.fszTitle], g_szNotificationDialog
     jmp     SHORT DisplayMessageDialogWithMessageInCSDXandDialogInputInDSSI
@@ -123 +121 @@
 
 ;--------------------------------------------------------------------
-; Dialogs_DisplayQuitDialog
-; Dialogs_DisplaySaveChangesDialog
+; Dialogs_DisplayYesNoResponseDialogWithTitleStringInBX
 ;   Parameters:
+;       BX:     Offset to dialog title string
 ;       SS:BP:  Menu handle
 ;   Returns:
@@ -134 +132 @@
 ;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
-Dialogs_DisplayQuitDialog:
+Dialogs_DisplayYesNoResponseDialogWithTitleStringInBX:
     push    ds
 
@@ -140 +138 @@
     call    Memory_ReserveCXbytesFromStackToDSSI
     call    InitializeDialogInputFromDSSI
-    mov     WORD [si+DIALOG_INPUT.fszTitle], g_szDlgExitToDos
-    jmp     Dialogs_DisplayQuitAndSaveChangesDialogsSharedEnding
-
-
-ALIGN JUMP_ALIGN
-Dialogs_DisplaySaveChangesDialog:
-    push    ds
-
-    mov     cx, DIALOG_INPUT_size
-    call    Memory_ReserveCXbytesFromStackToDSSI
-    call    InitializeDialogInputFromDSSI
-    mov     WORD [si+DIALOG_INPUT.fszTitle], g_szDlgSaveChanges
-Dialogs_DisplayQuitAndSaveChangesDialogsSharedEnding:
+    mov     [si+DIALOG_INPUT.fszTitle], bx
     mov     WORD [si+DIALOG_INPUT.fszItems], g_szMultichoiceBooleanFlag
     CALL_MENU_LIBRARY GetSelectionToAXwithInputInDSSI
     add     sp, BYTE DIALOG_INPUT_size
-    cmp     ax, BYTE 1      ; 1 = YES
+    dec     ax              ; -1 = NO, 0 = YES
 
     pop     ds

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/EEPROM.asm

@@ -50 +50 @@
 ;       DX:CX:  BIOS size in bytes
 ;   Corrupts registers:
-;       AX, BX, SI, DI
+;       BX, SI, DI
 ;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
@@ -61 +61 @@
     call    LoadBytesFromRomToRamBuffer
 
-    call    EEPROM_GetXtideUniversalBiosSizeFromESDItoDXCX
     pop     es
     ret
@@ -90 +89 @@
 ;       Nothing
 ;   Returns:
-;       CF:     Set if EEPROM was found
-;               Cleared if EEPROM not found
-;   Corrupts registers:
-;       AX, BX, CX, SI, DI
+;       CF:     Cleared if EEPROM was found
+;               Set if EEPROM not found
+;   Corrupts registers:
+;       BX, CX, SI
 ;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
@@ -107 +106 @@
 ;       SI:     Offset to first byte to load
 ;   Returns:
-;       CF:     Set if EEPROM was found
-;               Cleared if EEPROM not found
-;   Corrupts registers:
-;       AX, BX, CX, SI
+;       CF:     Cleared if EEPROM was found
+;               Set if EEPROM not found
+;   Corrupts registers:
+;       BX, SI
 ;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
@@ -119 +118 @@
 
     call    EEPROM_FindXtideUniversalBiosROMtoESDI
-    jnc     SHORT .XtideUniversalBiosNotFound
+    jc      SHORT .XtideUniversalBiosNotFound
     push    es
     pop     ds                                          ; DS:SI points to ROM
@@ -126 +125 @@
     mov     di, si                                      ; ES:DI points to RAM buffer
 
+%ifdef CLD_NEEDED
     cld
-    call    Memory_CopyCXbytesFromDSSItoESDI
-    stc
+%endif
+    call    Memory_CopyCXbytesFromDSSItoESDI            ; Clears CF
 
 .XtideUniversalBiosNotFound:
@@ -143 +143 @@
 ;   Returns:
 ;       ES:DI:  EEPROM segment
-;       CF:     Set if EEPROM was found
-;               Cleared if EEPROM not found
-;   Corrupts registers:
-;       AX, BX
+;       CF:     Cleared if EEPROM was found
+;               Set if EEPROM not found
+;   Corrupts registers:
+;       BX
 ;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
@@ -159 +159 @@
     mov     es, bx                  ; Possible ROM segment to ES
     call    Buffers_IsXtideUniversalBiosSignatureInESDI
-    je      SHORT .RomFound
+    je      SHORT .RomFound         ; If equal, CF=0
     add     bx, 80h                 ; Increment by 2kB (minimum possible distance from the beginning of one option ROM to the next)
     jnc     SHORT .SegmentLoop      ; Loop until segment overflows
-    clc
-    jmp     SHORT .ReturnWithoutUpdatingCF
-ALIGN JUMP_ALIGN
 .RomFound:
-    stc
-.ReturnWithoutUpdatingCF:
     pop     cx
     pop     si
@@ -191 +186 @@
     call    Buffers_GetFlashComparisonBufferToESDI
     eMOVZX  bx, [cs:g_cfgVars+CFGVARS.bEepromType]
-    mov     cx, [cs:bx+g_rgwEepromTypeToSizeInWords]
+%ifdef CLD_NEEDED
     cld
+%endif
+;%if g_rgwEepromTypeToSizeInWords = 0   ; *FIXME* It really is but NASM won't accept this.
+    mov     cx, [cs:bx]
+;%else
+;   mov     cx, [cs:bx+g_rgwEepromTypeToSizeInWords]
+;%endif
     rep movsw
 

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Flash.asm

@@ -78 +78 @@
 ALIGN JUMP_ALIGN
 Flash_SinglePageWithFlashvarsInSSBP:
+%ifdef CLD_NEEDED
     cld
+%endif
     call    AreSourceAndDestinationPagesEqualFromFlashvarsInSSBP
     je      SHORT .NoNeedToFlashThePage ; CF cleared
@@ -305 +307 @@
 ALIGN JUMP_ALIGN
 WaitUntilEepromPageWriteHasCompleted:
-    call    .InitializeTimeoutCounterForEepromPollingWithFlashvarsInSSBP
-    mov     es, [bp+FLASHVARS.fpNextDestinationPage+2]
-    mov     di, [bp+FLASHVARS.wLastOffsetWritten]
-ALIGN JUMP_ALIGN
-.PollEeprom:
-    call    .HasWriteCycleCompleted
-    je      SHORT .PageWriteCompleted   ; CF cleared
-    call    TimerTicks_GetTimeoutTicksLeftToAXfromDSBX
-    jnc     SHORT .PollEeprom
-ALIGN JUMP_ALIGN
-.PageWriteCompleted:
-    ret
-
-;--------------------------------------------------------------------
-; .InitializeTimeoutCounterForEepromPollingWithFlashvarsInSSBP
-;   Parameters:
-;       SS:BP:  Ptr to FLASHVARS
-;   Returns:
-;       DS:BX:  Ptr to timeout counter variable
-;   Corrupts registers:
-;       AX
-;--------------------------------------------------------------------
-ALIGN JUMP_ALIGN
-.InitializeTimeoutCounterForEepromPollingWithFlashvarsInSSBP:
     push    ss
     pop     ds
     lea     bx, [bp+FLASHVARS.wTimeoutCounter]
     mov     ax, EEPROM_POLLING_TIMEOUT_TICKS
-    jmp     TimerTicks_InitializeTimeoutFromAX
-
-;--------------------------------------------------------------------
-; .HasWriteCycleCompleted
-;   Parameters:
-;       ES:DI:  Ptr to last written byte in EEPROM
-;       SS:BP:  Ptr to FLASHVARS
-;   Returns:
-;       ZF:     Set if write cycle has completed
-;               Cleared if write cycle in progress
-;   Corrupts registers:
-;       AX
-;--------------------------------------------------------------------
-ALIGN JUMP_ALIGN
-.HasWriteCycleCompleted:
-    mov     ah, [es:di]     ; Load byte from EEPROM
-    mov     al, [bp+FLASHVARS.bLastByteWritten]
-    and     ax, 8080h       ; Clear all but bit 7 from both bytes
-    cmp     al, ah          ; Set ZF if high bits are the same
-    ret
-
+    call    TimerTicks_InitializeTimeoutFromAX
+    mov     es, [bp+FLASHVARS.fpNextDestinationPage+2]
+    mov     di, [bp+FLASHVARS.wLastOffsetWritten]
+ALIGN JUMP_ALIGN
+.PollEeprom:
+    mov     al, [es:di]                         ; Load byte from EEPROM
+    xor     al, [bp+FLASHVARS.bLastByteWritten] ; Clear SF if the most significant bits are the same
+    jns     SHORT .PageWriteCompleted           ; With CF cleared
+    call    TimerTicks_GetTimeoutTicksLeftToAXfromDSBX
+    jnc     SHORT .PollEeprom
+ALIGN JUMP_ALIGN, ret
+.PageWriteCompleted:
+    ret
 
 ;--------------------------------------------------------------------

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/IdeAutodetect.asm

@@ -118 +118 @@
     ; example Promise FloppyMAX has Control Block at STANDARD_CONTROL_BLOCK_OFFSET but Sound Blaster 16 (CT2290)
     ; use DEVICE_ATA_SECONDARY_PORTCTRL for Tertiary and Quaternary even though only Secondary should use that.
-    call    ChangeDifferentControlBlockAddressToSI
-    je      SHORT .RedetectTertiaryOrQuaternaryWithDifferentControlBlockAddress
+    call    ChangeControlBlockAddressInSI
+    jz      SHORT .RedetectTertiaryOrQuaternaryWithDifferentControlBlockAddress
 
 
@@ -130 +130 @@
     mov     si, dx
     add     si, BYTE XTCF_CONTROL_BLOCK_OFFSET
-    shl     bx, 1                       ; SHL 1 register offsets for XT-CF
+    eSHL_IM bx, 1                       ; SHL 1 register offsets for XT-CF
     call    DetectIdeDeviceFromPortsDXandSIwithOffsetsInBLandBH
     mov     al, DEVICE_8BIT_XTCF_PIO8
@@ -233 +233 @@
 
 ;--------------------------------------------------------------------
-; ChangeDifferentControlBlockAddressToSI
+; ChangeControlBlockAddressInSI
 ;   Parameters:
 ;       DX:     IDE Base Port address
@@ -241 +241 @@
 ;               Cleared if different control block address is not possible
 ;   Corrupts registers:
-;       AH
-;--------------------------------------------------------------------
-ChangeDifferentControlBlockAddressToSI:
+;       Nothing
+;--------------------------------------------------------------------
+ChangeControlBlockAddressInSI:
     cmp     si, 368h
     je      SHORT .TrySecondAlternative
@@ -252 +252 @@
     je      SHORT .TryLastAlternative
     cmp     si, 3E0h
-    je      SHORT .TryLastAlternative
-    ret     ; Return with ZF cleared
+    jne     SHORT .Return   ; With ZF cleared
 
 .TryLastAlternative:
@@ -260 +259 @@
 .TrySecondAlternative:
     sub     si, BYTE 8h     ; 368h to 360h, 3E8h to 3E0h
-    xor     ah, ah          ; Set ZF
+    cmp     sp, sp          ; Set ZF
+.Return:
     ret
 

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Main.asm

@@ -132 +132 @@
     call    Buffers_Clear
     call    EEPROM_FindXtideUniversalBiosROMtoESDI
-    jnc     SHORT .InitializationCompleted
+    jc      SHORT .InitializationCompleted
     mov     [CFGVARS.wEepromSegment], es
 .InitializationCompleted:

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/MenuEvents.asm

@@ -84 +84 @@
     pop     ds
 
-    mov     WORD [si+MENUINIT.wItems], ax
-    mov     WORD [si+MENUINIT.bTitleLines], TITLE_LINES_IN_MENU
-    mov     WORD [si+MENUINIT.bInfoLines], INFO_LINES_IN_MENU
+    mov     [si+MENUINIT.wItems], ax
+    mov     WORD [si+MENUINIT.wTitleAndInfoLines], INFO_LINES_IN_MENU << 8 | TITLE_LINES_IN_MENU
     mov     BYTE [si+MENUINIT.bWidth], MENU_WIDTH
     CALL_DISPLAY_LIBRARY GetColumnsToALandRowsToAH
@@ -112 +111 @@
 ALIGN JUMP_ALIGN
 .QuitProgram:
-    call    Dialogs_DisplayQuitDialog
+    mov     bx, g_szDlgExitToDos
+    call    Dialogs_DisplayYesNoResponseDialogWithTitleStringInBX
     jz      SHORT .ExitToDOS
     clc
@@ -169 +169 @@
 ALIGN JUMP_ALIGN
 .RefreshItemFromCX:
-    cmp     cx, NO_ITEM_HIGHLIGHTED
-    je      SHORT .NothingToRefresh
+    inc     cx                  ; NO_ITEM_HIGHLIGHTED ?
+    jz      SHORT .NothingToRefresh
+    dec     cx
     call    Menupage_GetActiveMenupageToDSDI
     call    Menupage_GetCXthVisibleMenuitemToDSSIfromDSDI
@@ -185 +186 @@
 ALIGN JUMP_ALIGN
 .RefreshInformation:
-    cmp     cx, NO_ITEM_HIGHLIGHTED
-    je      SHORT .NothingToRefresh
+    inc     cx                  ; NO_ITEM_HIGHLIGHTED ?
+    jz      SHORT .NothingToRefresh
+    dec     cx
     call    Menupage_GetActiveMenupageToDSDI
     call    Menupage_GetCXthVisibleMenuitemToDSSIfromDSDI
@@ -213 +215 @@
 ALIGN JUMP_ALIGN
 .PrintLoadStatus:
-    mov     ax, [g_cfgVars+CFGVARS.wFlags]
-    test    ax, FLG_CFGVARS_FILELOADED
+    mov     al, [g_cfgVars+CFGVARS.wFlags]
+    test    al, FLG_CFGVARS_FILELOADED
     jnz     SHORT .PrintNameOfLoadedFile
-    test    ax, FLG_CFGVARS_ROMLOADED
+    test    al, FLG_CFGVARS_ROMLOADED
     mov     si, g_szEEPROM
     jnz     SHORT .PrintNameOfLoadedFileOrEeprom
@@ -253 +255 @@
 ALIGN JUMP_ALIGN
 .PrintStatusOfUnsavedChanges:
-    test    WORD [g_cfgVars+CFGVARS.wFlags], FLG_CFGVARS_UNSAVED
+    test    BYTE [g_cfgVars+CFGVARS.wFlags], FLG_CFGVARS_UNSAVED
     jz      SHORT .ReturnSinceNothingToPrint
     mov     si, g_szUnsaved

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Menuitem.asm

@@ -53 +53 @@
     call    Memory_ReserveCXbytesFromStackToDSSI
     call    InitializeDialogInputInDSSIfromMenuitemInESDI
-    mov     ax, [es:di+MENUITEM.itemValue + ITEM_VALUE.szMultichoice]
+    mov     ax, [es:di+MENUITEM.itemValue+ITEM_VALUE.szMultichoice]
     mov     [si+DIALOG_INPUT.fszItems], ax
     push    di
@@ -59 +59 @@
     pop     di
 
-    cmp     ax, BYTE NO_ITEM_SELECTED
-    je      SHORT .NothingToChange
+    inc     ax              ; NO_ITEM_SELECTED ?
+    jz      SHORT .NothingToChange
+    dec     ax
     call    Registers_CopyESDItoDSSI
     call    Menuitem_StoreValueFromAXtoMenuitemInDSSI
@@ -70 +71 @@
 ;--------------------------------------------------------------------
 ; Menuitem_ActivateHexInputForMenuitemInDSSI
-;   Parameters:
-;       DS:SI:  Ptr to MENUITEM
-;   Returns:
-;       Nothing
+; Menuitem_ActivateUnsignedInputForMenuitemInDSSI
+;   Parameters:
+;       DS:SI:  Ptr to MENUITEM
+;   Returns:
+;       CF:     Cleared if value inputted
+;               Set if user cancellation
 ;   Corrupts registers:
 ;       AX, BX, CX, SI, DI, ES
 ;--------------------------------------------------------------------
-ALIGN JUMP_ALIGN
 Menuitem_ActivateHexInputForMenuitemInDSSI:
+    mov     bl, 16
+    SKIP2B  ax
+Menuitem_ActivateUnsignedInputForMenuitemInDSSI:
+    mov     bl, 10
+
     call    Registers_CopyDSSItoESDI
-
     mov     cx, WORD_DIALOG_IO_size
     call    Memory_ReserveCXbytesFromStackToDSSI
     call    InitializeDialogInputInDSSIfromMenuitemInESDI
-    mov     BYTE [si+WORD_DIALOG_IO.bNumericBase], 16
-    jmp     SHORT ContinueWordInput
-
-;--------------------------------------------------------------------
-; Menuitem_ActivateUnsignedInputForMenuitemInDSSI
-;   Parameters:
-;       DS:SI:  Ptr to MENUITEM
-;   Returns:
-;       CF:     Cleared if value inputted
-;               Set if user cancellation
-;   Corrupts registers:
-;       AX, BX, CX, SI, DI, ES
-;--------------------------------------------------------------------
-ALIGN JUMP_ALIGN
-Menuitem_ActivateUnsignedInputForMenuitemInDSSI:
-    call    Registers_CopyDSSItoESDI
-
-    mov     cx, WORD_DIALOG_IO_size
-    call    Memory_ReserveCXbytesFromStackToDSSI
-    call    InitializeDialogInputInDSSIfromMenuitemInESDI
-    mov     BYTE [si+WORD_DIALOG_IO.bNumericBase], 10
-ContinueWordInput:
-    mov     ax, [es:di+MENUITEM.itemValue + ITEM_VALUE.wMinValue]
+    mov     [si+WORD_DIALOG_IO.bNumericBase], bl
+    mov     ax, [es:di+MENUITEM.itemValue+ITEM_VALUE.wMinValue]
     mov     [si+WORD_DIALOG_IO.wMin], ax
-    mov     ax, [es:di+MENUITEM.itemValue + ITEM_VALUE.wMaxValue]
+    mov     ax, [es:di+MENUITEM.itemValue+ITEM_VALUE.wMaxValue]
     mov     [si+WORD_DIALOG_IO.wMax], ax
     push    di
@@ -138 +123 @@
 ALIGN JUMP_ALIGN
 InitializeDialogInputInDSSIfromMenuitemInESDI:
-    mov     ax, [es:di+MENUITEM.itemValue + ITEM_VALUE.szDialogTitle]
+    mov     ax, [es:di+MENUITEM.itemValue+ITEM_VALUE.szDialogTitle]
     mov     [si+DIALOG_INPUT.fszTitle], ax
     mov     [si+DIALOG_INPUT.fszTitle+2], cs
@@ -162 +147 @@
 ALIGN JUMP_ALIGN
 Menuitem_StoreValueFromAXtoMenuitemInDSSI:
+%if 0
+    ; 3 bytes more but this will always invoke the Writer, even if it's an invalid item type (which might be useful).
     eMOVZX  bx, [si+MENUITEM.bType]
     cmp     bl, TYPE_MENUITEM_HEX
+%else
+    ; This will only invoke the Writer for valid item types.
+    mov     bx, -TYPE_MENUITEM_MULTICHOICE & 0FFh
+    add     bl, [si+MENUITEM.bType]
+    jnc     SHORT .InvalidItemType
+    cmp     bl, TYPE_MENUITEM_HEX - TYPE_MENUITEM_MULTICHOICE
+%endif
     ja      SHORT .InvalidItemType
 
@@ -169 +163 @@
     add     di, [si+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
 
-    push    bx
-    mov     bx,[si+MENUITEM.itemValue+ITEM_VALUE.fnValueWriter]
-    test    bx,bx
-    jz      SHORT .NoWriter
-    call    bx
-.NoWriter:
+    push    WORD [cs:bx+.rgfnJumpToStoreValueBasedOnItemType]
+    mov     bx, [si+MENUITEM.itemValue+ITEM_VALUE.fnValueWriter]
+    test    bx, bx
+    jnz     SHORT .InvokeWriter
+.InvalidItemType:
     pop     bx
-
-    jmp     [cs:bx+.rgfnJumpToStoreValueBasedOnItemType]
-.InvalidItemType:
-    ret
+.InvokeWriter:
+    jmp     bx              ; The Writer can freely corrupt BX
 
 ALIGN WORD_ALIGN
 .rgfnJumpToStoreValueBasedOnItemType:
-    dw      .InvalidItemType                                    ; TYPE_MENUITEM_PAGEBACK
-    dw      .InvalidItemType                                    ; TYPE_MENUITEM_PAGENEXT
-    dw      .InvalidItemType                                    ; TYPE_MENUITEM_ACTION
+;   dw      .InvalidItemType                                    ; TYPE_MENUITEM_PAGEBACK
+;   dw      .InvalidItemType                                    ; TYPE_MENUITEM_PAGENEXT
+;   dw      .InvalidItemType                                    ; TYPE_MENUITEM_ACTION
     dw      .StoreMultichoiceValueFromAXtoESDIwithItemInDSSI    ; TYPE_MENUITEM_MULTICHOICE
     dw      .StoreByteOrWordValueFromAXtoESDIwithItemInDSSI     ; TYPE_MENUITEM_UNSIGNED
@@ -237 +228 @@
     jz      .StoreByteOrWordValueFromAXtoESDIwithItemInDSSI
 
-    shl     ax, 1           ; Shift for WORD lookup
+    eSHL_IM ax, 1           ; Shift for WORD lookup
     add     bx, ax
     mov     ax, [bx]        ; Lookup complete
@@ -317 +308 @@
 ;       AX:     Menuitem value
 ;   Corrupts registers:
-;       BX
+;       Nothing
 ;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
@@ -330 +321 @@
     test    BYTE [si+MENUITEM.bFlags], FLG_MENUITEM_BYTEVALUE
     jz      SHORT .NoConvertWordToByteValue
-    xor     ah, ah              ; conversion needs to happen before call to the reader,
-                                ; in case the reader unpacks the byte to a word
+    xor     ah, ah          ; conversion needs to happen before call to the reader,
+                            ; in case the reader unpacks the byte to a word
 
 .NoConvertWordToByteValue:
@@ -338 +329 @@
     jz      SHORT .NoReader
 
-    call    bx
+    call    bx              ; The Reader can freely corrupt BX, DI and ES
 
 .NoReader:

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/MenuitemPrint.asm

@@ -168 +168 @@
 MenuitemPrint_WriteLookupValueStringToBufferInESDIfromUnshiftedItemInDSSI:
     call    Menuitem_GetValueToAXfromMenuitemInDSSI
-    shl     ax, 1
+    eSHL_IM ax, 1
     jmp     SHORT PrintLookupValueFromAXtoBufferInESDI
 

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Menupages/BootMenuSettingsMenu.asm

@@ -1 +1 @@
 ; Project name  :   XTIDE Universal BIOS Configurator v2
-; Description   :   "Boot Menu Settings" menu structs and functions.
+; Description   :   "Boot settings" menu structs and functions.
 
 ;
@@ -26 +26 @@
     at  MENUPAGE.fnEnter,           dw  BootMenuSettingsMenu_EnterMenuOrModifyItemVisibility
     at  MENUPAGE.fnBack,            dw  ConfigurationMenu_EnterMenuOrModifyItemVisibility
-    at  MENUPAGE.wMenuitems,        dw  6
+    at  MENUPAGE.wMenuitems,        dw  7
 iend
 
@@ -55 +55 @@
 iend
 
+g_MenuitemBootMnuStngsColorTheme:
+istruc MENUITEM
+    at  MENUITEM.fnActivate,        dw  Menuitem_ActivateMultichoiceSelectionForMenuitemInDSSI
+    at  MENUITEM.fnFormatValue,     dw  MenuitemPrint_WriteLookupValueStringToBufferInESDIfromUnshiftedItemInDSSI
+    at  MENUITEM.szName,            dw  g_szItemColorTheme
+    at  MENUITEM.szQuickInfo,       dw  g_szNfoColorTheme
+    at  MENUITEM.szHelp,            dw  g_szHelpColorTheme
+    at  MENUITEM.bFlags,            db  FLG_MENUITEM_VISIBLE | FLG_MENUITEM_MODIFY_MENU
+    at  MENUITEM.bType,             db  TYPE_MENUITEM_MULTICHOICE
+    at  MENUITEM.itemValue + ITEM_VALUE.wRomvarsValueOffset,        dw  ROMVARS.pColorTheme     ; Only ever read - never modified
+    at  MENUITEM.itemValue + ITEM_VALUE.szDialogTitle,              dw  g_szDlgColorTheme
+    at  MENUITEM.itemValue + ITEM_VALUE.szMultichoice,              dw  g_szMultichoiceColorTheme
+    at  MENUITEM.itemValue + ITEM_VALUE.rgwChoiceToValueLookup,     dw  NULL
+    at  MENUITEM.itemValue + ITEM_VALUE.rgszValueToStringLookup,    dw  g_rgszValueToStringLookupForColorTheme
+    at  MENUITEM.itemValue + ITEM_VALUE.fnValueReader,              dw  ReadColorTheme
+    at  MENUITEM.itemValue + ITEM_VALUE.fnValueWriter,              dw  WriteColorTheme
+iend
+
 g_MenuitemBootMnuStngsFloppyDrives:
 istruc MENUITEM
@@ -116 +134 @@
     at  MENUITEM.itemValue + ITEM_VALUE.wMaxValue,                  dw  1092
 iend
-
-
-g_rgwChoiceToValueLookupForEnableBootMenu:
-    dw  FALSE
-    dw  BOOT_MENU_DEFAULT_TIMEOUT
 
 g_rgwChoiceToValueLookupForDisplayModes:
@@ -146 +159 @@
     dw  g_szValueBootFloppyDrvs4
 
+g_rgszValueToStringLookupForColorTheme:
+    dw  g_szValueColorTheme0
+    dw  g_szValueColorTheme1
+    dw  g_szValueColorTheme2
+    dw  g_szValueColorTheme3
+    dw  g_szValueColorTheme4
+    dw  g_szValueColorTheme5
+
+ColorThemeTable:
+    ; Classic (default)
+    db  COLOR_ATTRIBUTE(COLOR_YELLOW, COLOR_BLUE)                           ; .cBordersAndBackground
+    db  COLOR_ATTRIBUTE(COLOR_GRAY, COLOR_BLACK)                            ; .cShadow
+    db  COLOR_ATTRIBUTE(COLOR_BRIGHT_WHITE, COLOR_BLUE)                     ; .cTitle
+    db  COLOR_ATTRIBUTE(COLOR_WHITE, COLOR_BLUE)                            ; .cItem
+    db  COLOR_ATTRIBUTE(COLOR_BRIGHT_WHITE, COLOR_CYAN)                     ; .cHighlightedItem
+    db  COLOR_ATTRIBUTE(COLOR_RED, COLOR_BLUE) | FLG_COLOR_BLINK            ; .cHurryTimeout
+    db  COLOR_ATTRIBUTE(COLOR_GREEN, COLOR_BLUE)                            ; .cNormalTimeout
+    ; Argon Blue
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_BLUE, COLOR_BLACK)                      ; .cBordersAndBackground
+    db  COLOR_ATTRIBUTE(COLOR_GRAY, COLOR_BLACK)                            ; .cShadow
+    db  COLOR_ATTRIBUTE(COLOR_BRIGHT_WHITE, COLOR_BLACK)                    ; .cTitle
+    db  COLOR_ATTRIBUTE(COLOR_WHITE, COLOR_BLACK)                           ; .cItem
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_BLUE, COLOR_BLACK)                      ; .cHighlightedItem
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_BLUE, COLOR_BLACK) | FLG_COLOR_BLINK    ; .cHurryTimeout
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_BLUE, COLOR_BLACK)                      ; .cNormalTimeout
+    ; Neon Red
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_RED, COLOR_BLACK)                       ; .cBordersAndBackground
+    db  COLOR_ATTRIBUTE(COLOR_GRAY, COLOR_BLACK)                            ; .cShadow
+    db  COLOR_ATTRIBUTE(COLOR_BRIGHT_WHITE, COLOR_BLACK)                    ; .cTitle
+    db  COLOR_ATTRIBUTE(COLOR_WHITE, COLOR_BLACK)                           ; .cItem
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_RED, COLOR_BLACK)                       ; .cHighlightedItem
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_RED, COLOR_BLACK) | FLG_COLOR_BLINK     ; .cHurryTimeout
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_RED, COLOR_BLACK)                       ; .cNormalTimeout
+    ; Phosphor Green
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_GREEN, COLOR_BLACK)                     ; .cBordersAndBackground
+    db  COLOR_ATTRIBUTE(COLOR_GRAY, COLOR_BLACK)                            ; .cShadow
+    db  COLOR_ATTRIBUTE(COLOR_BRIGHT_WHITE, COLOR_BLACK)                    ; .cTitle
+    db  COLOR_ATTRIBUTE(COLOR_WHITE, COLOR_BLACK)                           ; .cItem
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_GREEN, COLOR_BLACK)                     ; .cHighlightedItem
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_GREEN, COLOR_BLACK) | FLG_COLOR_BLINK   ; .cHurryTimeout
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_GREEN, COLOR_BLACK)                     ; .cNormalTimeout
+    ; Moon Surface
+    db  COLOR_ATTRIBUTE(COLOR_GRAY, COLOR_BLACK)                            ; .cBordersAndBackground
+    db  COLOR_ATTRIBUTE(COLOR_GRAY, COLOR_BLACK)                            ; .cShadow
+    db  COLOR_ATTRIBUTE(COLOR_BRIGHT_WHITE, COLOR_BLACK)                    ; .cTitle
+    db  COLOR_ATTRIBUTE(COLOR_WHITE, COLOR_BLACK)                           ; .cItem
+    db  COLOR_ATTRIBUTE(COLOR_BROWN, COLOR_BLACK)                           ; .cHighlightedItem
+    db  COLOR_ATTRIBUTE(COLOR_BRIGHT_WHITE, COLOR_BLACK) | FLG_COLOR_BLINK  ; .cHurryTimeout
+    db  COLOR_ATTRIBUTE(COLOR_WHITE, COLOR_BLACK)                           ; .cNormalTimeout
+    ; Toxic Waste
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_GREEN, COLOR_BLACK)                     ; .cBordersAndBackground
+    db  COLOR_ATTRIBUTE(COLOR_GRAY, COLOR_BLACK)                            ; .cShadow
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_GREEN, COLOR_BLACK)                     ; .cTitle
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_CYAN, COLOR_BLACK)                      ; .cItem
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_CYAN, COLOR_BLUE)                       ; .cHighlightedItem
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_RED, COLOR_BLACK) | FLG_COLOR_BLINK     ; .cHurryTimeout
+    db  COLOR_ATTRIBUTE(COLOR_LIGHT_RED, COLOR_BLACK)                       ; .cNormalTimeout
+EndOfColorThemeTable:
+CountOfThemes   equ     (EndOfColorThemeTable-ColorThemeTable) / ATTRIBUTE_CHARS_size
+
 
 ; Section containing code
@@ -166 +239 @@
     call    .EnableOrDisableScanForSerialDrives
     call    .EnableOrDisableDefaultBootDrive
+    call    .EnableOrDisableColorThemeSelection
     call    .EnableOrDisableBootMenuSelectionTimeout
     mov     si, g_MenupageForBootMenuSettingsMenu
@@ -202 +276 @@
     mov     bx, g_MenuitemBootMnuStngsDefaultBootDrive
     test    ax, FLG_ROMVARS_MODULE_HOTKEYS | FLG_ROMVARS_MODULE_BOOT_MENU
+    jmp     SHORT .DisableMenuitemFromCSBXifZFset
+
+
+;--------------------------------------------------------------------
+; .EnableOrDisableColorThemeSelection
+;   Parameters:
+;       AX:     ROMVARS.wFlags
+;       SS:BP:  Menu handle
+;   Returns:
+;       Nothing
+;   Corrupts registers:
+;       BX
+;--------------------------------------------------------------------
+ALIGN JUMP_ALIGN
+.EnableOrDisableColorThemeSelection:
+    mov     bx, g_MenuitemBootMnuStngsColorTheme
+    test    ax, FLG_ROMVARS_MODULE_BOOT_MENU
     jmp     SHORT .DisableMenuitemFromCSBXifZFset
 
@@ -244 +335 @@
 
 ;--------------------------------------------------------------------
-; MENUITEM value reader functions
-;   Parameters:
-;       AX:     Value from MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset
-;       DS:SI:  Ptr to MENUITEM
-;       ES:DI:  Ptr to value variable
-;   Returns:
-;       AX:     Value with possible modifications
-;   Corrupts registers:
-;       Nothing
-;--------------------------------------------------------------------
-ALIGN JUMP_ALIGN
-ValueReaderForEnableBootMenu:
-    test    ax, ax
-    jz      SHORT .NoNeedToModify
-    mov     ax, TRUE<<1
-.NoNeedToModify:
+; ReadColorTheme
+;   Parameters:
+;       AX:     Value read from the ROMVARS location
+;       ES:DI:  ROMVARS location where the value was just read from
+;       DS:SI:  MENUITEM pointer
+;   Returns:
+;       AX:     Value that the MENUITEM system will interact with and display
+;   Corrupts registers:
+;       BX, DI, ES
+;--------------------------------------------------------------------
+ALIGN JUMP_ALIGN
+ReadColorTheme:
+    push    ds
+
+    push    es                          ; ES -> DS
+    pop     ds
+    push    cs                          ; CS -> ES
+    pop     es
+
+    mov     di, EndOfColorThemeTable-1  ; ES:DI now points to the end of the last theme in the table of available themes in XTIDECFG
+    xor     bx, bx
+
+    push    si
+    push    cx
+    mov     cx, CountOfThemes
+    std
+.NextTheme:
+    push    cx
+    mov     cl, ATTRIBUTE_CHARS_size
+    mov     si, ax                      ; [ROMVARS.pColorTheme] to SI
+    dec     si
+    add     si, cx                      ; DS:SI now points to the end of the ColorTheme in the loaded BIOS
+    sub     di, bx                      ; Update the pointer to the end of the next theme in the table
+
+    ; We verify that the theme in the loaded BIOS exists in our table. If it doesn't exist then that most likely means
+    ; the loaded BIOS doesn't contain MODULE_BOOT_MENU and the theme actually isn't a theme - it's code. Either way,
+    ; we don't trust it enough to copy it over as corrupt/invalid settings could render the UI in XTIDECFG unreadable.
+    repe    cmpsb
+    mov     bx, cx
+    pop     cx
+    loopne  .NextTheme
+    cld
+    mov     ax, cx
+    jne     SHORT .SkipCopy
+
+    ; Copy the color theme fron the loaded BIOS overwriting XTIDECFG's own theme
+    inc     si
+    mov     di, ColorTheme              ; ES:DI now points to ColorTheme in XTIDECFG
+
+    mov     cl, ATTRIBUTE_CHARS_size
+    call    Memory_CopyCXbytesFromDSSItoESDI
+
+.SkipCopy:
+    pop     cx
+    pop     si
+    pop     ds
     ret
+
+
+;--------------------------------------------------------------------
+; WriteColorTheme
+;   Parameters:
+;       AX:     Value that the MENUITEM system was interacting with
+;       ES:DI:  ROMVARS location where the value is to be stored
+;       DS:SI:  MENUITEM pointer
+;   Returns:
+;       AX:     Value to actually write to ROMVARS
+;   Corrupts registers:
+;       Nothing
+;--------------------------------------------------------------------
+ALIGN JUMP_ALIGN
+WriteColorTheme:
+    push    cx
+    push    si
+    push    di
+
+    mov     cx, ATTRIBUTE_CHARS_size
+    mul     cl                          ; Multiply with the menu choice index
+    mov     si, ColorThemeTable
+    add     si, ax
+    mov     ax, [es:di]                 ; Fetch the ptr to ColorTheme
+    mov     di, ax
+
+    call    Memory_CopyCXbytesFromDSSItoESDI
+
+    pop     di
+    pop     si
+    pop     cx
+    ret
+

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Menupages/ConfigurationMenu.asm

@@ -245 +245 @@
 ;       Nothing
 ;   Corrupts registers:
-;       BX, DI, ES
+;       BX
 ;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
@@ -262 +262 @@
 ;       Nothing
 ;   Corrupts registers:
-;       AX, BX, CX
+;       AX, BX
 ;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
@@ -268 +268 @@
     call    Buffers_GetRomvarsFlagsToAX
     mov     bx, g_MenuitemConfigurationKiBtoStealFromRAM
-    test    ax, FLG_ROMVARS_FULLMODE
+    test    al, FLG_ROMVARS_FULLMODE
     jz      SHORT .DisableMenuitemFromCSBX
     jmp     SHORT .EnableMenuitemFromCSBX
@@ -319 +319 @@
 ;       All, except segments
 ;--------------------------------------------------------------------
+%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
+%if (ROMVARS.ideVars0 | ROMVARS.ideVars1 | ROMVARS.ideVars2 | ROMVARS.ideVars3) & 0FF00h = 0
+PrimaryIdeController:
+    mov     bl, ROMVARS.ideVars0 & 0FFh
+    SKIP2B  f
+SecondaryIdeController:
+    mov     bl, ROMVARS.ideVars1 & 0FFh
+    SKIP2B  f
+TertiaryIdeController:
+    mov     bl, ROMVARS.ideVars2 & 0FFh
+    SKIP2B  f
+QuaternaryIdeController:
+    mov     bl, ROMVARS.ideVars3 & 0FFh
+    xor     bh, bh
+    ; Fall to DisplayIdeControllerMenu
+%else
 ALIGN JUMP_ALIGN
 PrimaryIdeController:
@@ -338 +354 @@
     mov     bx, ROMVARS.ideVars3
     ; Fall to DisplayIdeControllerMenu
+%endif
+%endif
 
 ALIGN JUMP_ALIGN
@@ -383 +401 @@
 ;       Nothing
 ;   Corrupts registers:
-;       All
+;       AX, BX, CX, DX
 ;----------------------------------------------------------------------
 ConfigurationMenu_CheckAndMoveSerialDrivesToBottom:
@@ -428 +446 @@
 ; move serial to end of list, others up
 ;
+%ifdef CLD_NEEDED
     cld
-
+%endif
     mov     ax, di                      ; save end pointer of list after scan
-
     sub     sp, IDEVARS_size            ; copy serial to temporary space on stack
-
     mov     di, sp
 
@@ -439 +456 @@
     pop     es
 
+%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
 %if IDEVARS_size & 1
     mov     cl, IDEVARS_size
@@ -446 +464 @@
     rep movsw
 %endif
+%endif
 
     lea     di, [si-IDEVARS_size]       ; move up all the idevars below the serial, by one slot
-
     mov     cx, ax                      ; restore end pointer of list, subtract off end of serial idevars
     sub     cx, si
@@ -462 +480 @@
     ; di is already at last IDEVARS position
 
+%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
 %if IDEVARS_size & 1
     mov     cl, IDEVARS_size
@@ -469 +488 @@
     rep movsw
 %endif
+%endif
 
     add     sp, IDEVARS_size
@@ -476 +496 @@
 
     mov     dh, 1                       ; set flag that we have done a relocation
-
     jmp     SHORT .outerLoop
 

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Menupages/FlashMenu.asm

@@ -185 +185 @@
     pop     ds
 
-    cmp     WORD [cs:g_cfgVars+CFGVARS.wEepromSegment], 0
-    jne     .alreadySet
+    cmp     WORD [g_cfgVars+CFGVARS.wEepromSegment], 0
+    jne     SHORT .AlreadySet
 
     push    es
     push    di
     call    EEPROM_FindXtideUniversalBiosROMtoESDI
-    push    es
-    pop     ax
+    mov     ax, es
     pop     di
     pop     es
-    jc      .storeEepromSegment
+    jnc     SHORT .StoreEepromSegment
     mov     ax, DEFAULT_EEPROM_SEGMENT
-.storeEepromSegment:
-    mov     WORD [cs:g_cfgVars+CFGVARS.wEepromSegment], ax
-
-.alreadySet:
-
+.StoreEepromSegment:
+    mov     [g_cfgVars+CFGVARS.wEepromSegment], ax
+
+.AlreadySet:
     mov     si, g_MenupageForFlashMenu
     jmp     Menupage_ChangeToNewMenupageInDSSI
@@ -256 +254 @@
 ALIGN JUMP_ALIGN, ret
 .ImageFitsInSelectedEeprom:
+.DoNotGenerateChecksumByte:
     ret
 
@@ -271 +270 @@
     call    EEPROM_LoadFromRomToRamComparisonBuffer
     call    Buffers_AppendZeroesIfNeeded
-    test    WORD [cs:g_cfgVars+CFGVARS.wFlags], FLG_CFGVARS_CHECKSUM
+    test    BYTE [cs:g_cfgVars+CFGVARS.wFlags], FLG_CFGVARS_CHECKSUM
     jz      SHORT .DoNotGenerateChecksumByte
     jmp     Buffers_GenerateChecksum
-.DoNotGenerateChecksumByte:
-    ret
 
 ;--------------------------------------------------------------------
@@ -349 +346 @@
 .GetSelectedEepromSizeInWordsToAX:
     eMOVZX  bx, [cs:g_cfgVars+CFGVARS.bEepromType]
-    mov     ax, [cs:bx+g_rgwEepromTypeToSizeInWords]
+;%if g_rgwEepromTypeToSizeInWords = 0   ; *FIXME* It really is but NASM won't accept this.
+    mov     ax, [cs:bx]
+;%else
+;   mov     ax, [cs:bx+g_rgwEepromTypeToSizeInWords]
+;%endif
     ret
 

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Menupages/IdeControllerMenu.asm

@@ -135 +135 @@
     at  MENUITEM.itemValue + ITEM_VALUE.szDialogTitle,              dw  g_szDlgIdeCmdPort
     at  MENUITEM.itemValue + ITEM_VALUE.wMinValue,                  dw  8h
-    at  MENUITEM.itemValue + ITEM_VALUE.wMaxValue,                  dw  3f8h
+    at  MENUITEM.itemValue + ITEM_VALUE.wMaxValue,                  dw  3F8h
     at  MENUITEM.itemValue + ITEM_VALUE.fnValueReader,              dw  IdeControllerMenu_SerialReadPort
     at  MENUITEM.itemValue + ITEM_VALUE.fnValueWriter,              dw  IdeControllerMenu_SerialWritePort
@@ -306 +306 @@
     mov     [cs:g_MenuitemIdeControllerDevice+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
 
+%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
+%if IDEVARS.wBasePort = 0
+    mov     [cs:g_MenuitemIdeControllerCommandBlockAddress+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], bx
+%else
     lea     ax, [bx+IDEVARS.wBasePort]
     mov     [cs:g_MenuitemIdeControllerCommandBlockAddress+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
-
+%endif
+
+%if IDEVARS.bSerialPort = 0
+    mov     [cs:g_MenuitemIdeControllerSerialPort+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], bx
+%else
     lea     ax, [bx+IDEVARS.bSerialPort]
     mov     [cs:g_MenuitemIdeControllerSerialPort+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
+%endif
+%endif
 
     lea     ax, [bx+IDEVARS.bSerialBaud]
@@ -361 +371 @@
 ALIGN JUMP_ALIGN
 .EnableOrDisableCommandBlockPort:
-    mov     bx, [cs:g_MenuitemIdeControllerDevice+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
+    mov     bx, [g_MenuitemIdeControllerDevice+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
     call    Buffers_GetRomvarsValueToAXfromOffsetInBX
     mov     bx, g_MenuitemIdeControllerCommandBlockAddress
@@ -380 +390 @@
 ALIGN JUMP_ALIGN
 .EnableOrDisableControlBlockPort:
-    mov     bx, [cs:g_MenuitemIdeControllerDevice+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
+    mov     bx, [g_MenuitemIdeControllerDevice+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
     call    Buffers_GetRomvarsValueToAXfromOffsetInBX
     mov     bx, g_MenuitemIdeControllerControlBlockAddress
@@ -404 +414 @@
     jz      SHORT .DisableMenuitemFromCSBX
 
-    mov     bx, [cs:g_MenuitemIdeControllerDevice+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
+    mov     bx, [g_MenuitemIdeControllerDevice+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
     call    Buffers_GetRomvarsValueToAXfromOffsetInBX
     mov     bx, g_MenuitemIdeControllerEnableInterrupt
@@ -424 +434 @@
 ALIGN JUMP_ALIGN
 .EnableOrDisableIRQchannelSelection:
-    mov     bx, [cs:g_MenuitemIdeControllerEnableInterrupt+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
+    mov     bx, [g_MenuitemIdeControllerEnableInterrupt+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
     call    Buffers_GetRomvarsValueToAXfromOffsetInBX
     mov     bx, g_MenuitemIdeControllerIdeIRQ
@@ -453 +463 @@
 
 
+;--------------------------------------------------------------------
+; .EnableOrDisableSerial
+;   Parameters:
+;       SS:BP:  Menu handle
+;   Returns:
+;       Nothing
+;   Corrupts registers:
+;       AX, BX
+;--------------------------------------------------------------------
 .EnableOrDisableSerial:
     mov     bx, g_MenuitemIdeControllerSerialBaud
@@ -463 +482 @@
     call    DisableMenuitemFromCSBX
 
-    mov     bx, [cs:g_MenuitemIdeControllerDevice+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
+    mov     bx, [g_MenuitemIdeControllerDevice+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
     call    Buffers_GetRomvarsValueToAXfromOffsetInBX
     cmp     al, DEVICE_SERIAL_PORT
-    jne     .DisableAllSerial
+    jne     SHORT .DisableAllSerial
 
     mov     bx, g_MenuitemIdeControllerSerialCOM
@@ -474 +493 @@
     call    EnableMenuitemFromCSBX
 
-    mov     bx, [cs:g_MenuitemIdeControllerSerialCOM+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
+    mov     bx, [g_MenuitemIdeControllerSerialCOM+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
     call    Buffers_GetRomvarsValueToAXfromOffsetInBX
     mov     bx, g_MenuitemIdeControllerSerialPort
@@ -483 +502 @@
     ret
 
+
 ;--------------------------------------------------------------------
 ; MENUITEM activation functions (.fnActivate)
@@ -531 +551 @@
     jmp     MasterSlaveMenu_EnterMenuOrModifyItemVisibility
 
-;------------------------------------------------------------------------------------------
-;
-; Reader/Writer Routines
-;
-; For serial drives, we pack the port number and baud rate into a single byte, and thus
-; we need to take care to properly read/write just the bits we need.  In addition, since
-; we use the Port/PortCtrl bytes in a special way for serial drives, we need to properly
-; default the values stored in both these words when switching in and out of the Serial
-; device choice.
-;
-; Writers:
-;   Parameters:
-;       AX:     Value that the MENUITEM system was interacting with
-;       ES:DI:  ROMVARS location where the value is to be stored
+
+;--------------------------------------------------------------------
+; IdeControllerMenu_WriteDevice
+;
+; Sets default values to ports and other device dependent stuff
+;
+;   Parameters:
+;       AX:     IDE controller/Device type menu choice index
+;       ES:DI:  Ptr to IDEVARS.bDevice
 ;       DS:SI:  MENUITEM pointer
 ;   Returns:
-;       AX:     Value to actually write to ROMVARS
-;   Corrupts registers:
-;       AX
-;
-; Readers:
-;   Parameters:
-;       AX:     Value read from the ROMVARS location
-;       ES:DI:  ROMVARS location where the value was just read from
-;       DS:SI:  MENUITEM pointer
-;   Returns:
-;       AX:     Value that the MENUITEM system will interact with and display
-;   Corrupts registers:
-;       AX
-;
-ALIGN JUMP_ALIGN
-WriterForXTCFwindow:
-    xor     al, al
-    SKIP2B  f
-ReaderForXTCFwindow:
-    xor     ah, ah
-    xchg    al, ah
-    ret
-
-
+;       AX:     IDE controller/Device type menu choice index
+;   Corrupts registers:
+;       BX, DX
+;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
 IdeControllerMenu_WriteDevice:
-    push    bx
     push    di
     push    ax
@@ -581 +575 @@
 
     ; Note! AL is the choice index, not device code
-    shl     al, 1                               ; Selection to device code
-
-    ; Restore ports and other stuff to default values
+    eSHL_IM al, 1                               ; Selection to device code
     jz      SHORT .StandardIdeDevice            ; DEVICE_16BIT_ATA
 
@@ -603 +595 @@
     div     bl
     mov     bx, .rgbLowByteOfStdIdeInterfacePorts
-    xlat
+    xlat                                        ; DS=CS so no segment override needed
     mov     ah, 1                               ; DEVICE_ATA_*_PORT >> 8
     mov     bh, 3                               ; DEVICE_ATA_*_PORTCTRL >> 8
@@ -622 +614 @@
 
 .SupportForDeviceNotAvailable:
-    push    dx
     mov     dx, g_szUnsupportedDevice
     call    Dialogs_DisplayErrorFromCSDX
-    pop     dx
 
     ; Restore device type to the previous value
@@ -631 +621 @@
     mov     al, bl                              ; Previous device type to AL
     shr     al, 1                               ; Device code to choice index
-    jmp     SHORT .DoneWithNoChangeOfDevice
+    pop     di
+    ret
 
 .NotSerialDevice:
@@ -670 +661 @@
 
 .ChangingToSerial:
-    cmp     bl, DEVICE_SERIAL_PORT
-    je      SHORT .Done                         ; if we were already serial, nothing to do
-
+;
+; For serial drives, we pack the port number and baud rate into a single byte, and thus
+; we need to take care to properly read/write just the bits we need.  In addition, since
+; we use the Port/PortCtrl bytes in a special way for serial drives, we need to properly
+; default the values stored in both these words when switching in and out of the Serial
+; device choice.
+;
+    mov     al, SERIAL_DEFAULT_COM
     mov     BYTE [es:di+IDEVARS.bSerialBaud-IDEVARS.wBasePort], SERIAL_DEFAULT_BAUD
-    mov     BYTE [es:di+IDEVARS.bIRQ-IDEVARS.wBasePort], 0  ; Clear .bIRQ to keep the boot menu from printing it
-
-    mov     al, SERIAL_DEFAULT_COM
+    mov     [es:di+IDEVARS.bIRQ-IDEVARS.wBasePort], ah  ; Clear .bIRQ to keep the boot menu from printing it
+
     sub     di, IDEVARS.wBasePort - IDEVARS.bSerialCOMPortChar
     call    IdeControllerMenu_SerialWriteCOM
@@ -683 +678 @@
 .Done:
     pop     ax
-.DoneWithNoChangeOfDevice:
-    pop     di          ; IDEVARS.bDevice
-    pop     bx
+    pop     di
     ret
 
-;
-; Doesn't modify COM character (unless it is not recognized, which would be an error case),
-; But does update the port address based on COM port selection
-;
+
+;--------------------------------------------------------------------
+; IdeControllerMenu_SerialWriteCOM
+;
+; Updates the port address based on COM port selection
+;
+;   Parameters:
+;       AL:     COM port
+;       ES:DI:  Ptr to IDEVARS.bSerialCOMPortChar
+;       DS:SI:  MENUITEM pointer
+;   Returns:
+;       Nothing
+;   Corrupts registers:
+;       BX
+;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
 IdeControllerMenu_SerialWriteCOM:
     push    ax
-    push    bx
     push    si
 
-    mov     si, g_rgbChoiceToValueLookupForCOM
-    mov     bx, PackedCOMPortAddresses
-
-.loop:
-    mov     ah, [bx]
-
-    cmp     ah, (SERIAL_DEFAULT_CUSTOM_PORT >> 2)
-    je      .notFound
-
-    cmp     al, [si]
-    je      .found
-
+    mov     bx, PackedCOMPortAddresses - 1
+    mov     si, g_rgbChoiceToValueLookupForCOM - 2
+
+.Loop:
+    inc     bx
     inc     si
     inc     si
-    inc     bx
-
-    jmp     .loop
-
-.notFound:
-    mov     al, 'x'
-
-.found:
+
+    mov     ah, [bx]
+    cmp     ah, SERIAL_DEFAULT_CUSTOM_PORT >> 2
+    je      SHORT .NotFound
+
+    cmp     al, [si]
+    jne     SHORT .Loop
+
+.NotFound:
     mov     [es:di+IDEVARS.bSerialPort-IDEVARS.bSerialCOMPortChar], ah
 
     pop     si
-    pop     bx
     pop     ax
-
     ret
 
 
+;--------------------------------------------------------------------
+; IdeControllerMenu_SerialReadPort
 ;
 ; Packed Port (byte) -> Numeric Port (word)
 ;
+;   Parameters:
+;       AX:     Value read from the ROMVARS location
+;       ES:DI:  ROMVARS location where the value was just read from
+;       DS:SI:  MENUITEM pointer
+;   Returns:
+;       AX:     Value that the MENUITEM system will interact with and display
+;   Corrupts registers:
+;       Nothing
+;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
 IdeControllerMenu_SerialReadPort:
@@ -738 +744 @@
     ret
 
+
+;--------------------------------------------------------------------
+; IdeControllerMenu_SerialWritePort
 ;
 ; Numeric Port (word) -> Packed Port (byte)
-; And convert from Custom to a defined COM port if we match one of the pre-defined COM port numbers
-;
+;
+; And convert from Custom to a defined COM port if we
+; match one of the pre-defined COM port numbers
+;
+;   Parameters:
+;       AX:     Value that the MENUITEM system was interacting with
+;       ES:DI:  ROMVARS location where the value is to be stored
+;       DS:SI:  MENUITEM pointer
+;   Returns:
+;       AX:     Value to actually write to ROMVARS
+;   Corrupts registers:
+;       BX
+;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
 IdeControllerMenu_SerialWritePort:
-    push    bx
     push    si
 
     eSHR_IM ax, 2
-    and     al, 0feh            ; force 8-byte boundary
-
-    mov     si, g_rgbChoiceToValueLookupForCOM
-    mov     bx, PackedCOMPortAddresses          ; loop, looking for port address in known COM address list
-
-.loop:
-    mov     ah, [si]
-    cmp     ah, 'x'
-    je      .found
-
-    cmp     al, [bx]
-    je      .found
-
+    and     al, 0FEh                            ; Force 8-byte boundary
+
+    mov     si, g_rgbChoiceToValueLookupForCOM - 2
+    mov     bx, PackedCOMPortAddresses - 1      ; Loop, looking for port address in known COM address list
+
+.Loop:
     inc     si
     inc     si
     inc     bx
 
-    jmp     .loop
-
-.found:
+    mov     ah, [si]
+    cmp     ah, 'x'
+    je      SHORT .Found
+
+    cmp     al, [bx]
+    jne     SHORT .Loop
+
+.Found:
     mov     [es:di+IDEVARS.bSerialCOMPortChar-IDEVARS.bSerialPort], ah
 
     pop     si
-    pop     bx
-
     ret
 

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Menupages/MainMenu.asm

@@ -155 +155 @@
 .EnableOrDisableXtideRomItems:
     call    EEPROM_FindXtideUniversalBiosROMtoESDI
-    jnc     SHORT .DisableAllRomItems
+    jc      SHORT .DisableAllRomItems
     or      BYTE [g_MenuitemMainMenuLoadXtideUniversalBiosFromRom+MENUITEM.bFlags], FLG_MENUITEM_VISIBLE
     call    Buffers_IsXtideUniversalBiosLoaded
@@ -201 +201 @@
 ALIGN JUMP_ALIGN
 .EnableOrDisableFlashEeprom:
-    test    WORD [g_cfgVars+CFGVARS.wFlags], FLG_CFGVARS_FILELOADED | FLG_CFGVARS_ROMLOADED
+    test    BYTE [g_cfgVars+CFGVARS.wFlags], FLG_CFGVARS_FILELOADED | FLG_CFGVARS_ROMLOADED
     jz      SHORT .DisableFlashEeprom
     or      BYTE [g_MenuitemMainMenuFlashEeprom+MENUITEM.bFlags], FLG_MENUITEM_VISIBLE
@@ -222 +222 @@
 ALIGN JUMP_ALIGN
 .EnableOrDisableSave:
-    test    WORD [g_cfgVars+CFGVARS.wFlags], FLG_CFGVARS_FILELOADED
+    test    BYTE [g_cfgVars+CFGVARS.wFlags], FLG_CFGVARS_FILELOADED
     jz      SHORT .DisableSave
     or      BYTE [g_MenuitemMainMenuSaveFile+MENUITEM.bFlags], FLG_MENUITEM_VISIBLE
@@ -257 +257 @@
     add     si, BYTE FILE_DIALOG_IO.szFile
     call    BiosFile_LoadFileFromDSSItoRamBuffer
+    call    LoadColorTheme
+    ; *FIXME* Will load themes even from unrecognized versions of the BIOS which isn't really a problem but still 'unexpected behaviour' and therefore a bug.
     call    MainMenu_EnterMenuOrModifyItemVisibility
 .CancelFileLoading:
@@ -272 +274 @@
     mov     dx, g_szDlgMainLoadROM
     call    Dialogs_DisplayNotificationFromCSDX
+    call    LoadColorTheme
     jmp     MainMenu_EnterMenuOrModifyItemVisibility
 
@@ -281 +284 @@
     call    Buffers_SetUnsavedChanges
     mov     dx, g_szDlgMainLoadStngs
-    jmp     Dialogs_DisplayNotificationFromCSDX
-
+    call    Dialogs_DisplayNotificationFromCSDX
+    call    EEPROM_FindXtideUniversalBiosROMtoESDI
+    call    LoadColorTheme.FromROM
+    jmp     MainMenu_EnterMenuOrModifyItemVisibility
+
+
+;--------------------------------------------------------------------
+; LoadColorTheme
+;   Parameters:
+;       ES:     ROMVARS segment (only when loading theme from ROM)
+;   Returns:
+;       Nothing
+;   Corrupts registers:
+;       AX, BX, DI, ES
+;--------------------------------------------------------------------
+ALIGN JUMP_ALIGN
+LoadColorTheme:
+    call    Buffers_GetFileBufferToESDI
+.FromROM:
+    mov     ax, [es:ROMVARS.pColorTheme]
+    jmp     ReadColorTheme
+

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Menupages/MasterSlaveMenu.asm

@@ -196 +196 @@
     dw  DISABLE_WRITE_CACHE
     dw  ENABLE_WRITE_CACHE
-
 g_rgszChoiceToStringLookupForWriteCache:
     dw  g_szValueBootDispModeDefault
@@ -207 +206 @@
     dw  TRANSLATEMODE_ASSISTED_LBA
     dw  TRANSLATEMODE_AUTO
-
 g_rgszChoiceToStringLookupForXlateMode:
     dw  g_szValueDrvXlateNormal
@@ -229 +227 @@
 ALIGN JUMP_ALIGN
 MasterSlaveMenu_InitializeToDrvparamsOffsetInBX:
+    push    ds
+
+    push    cs
+    pop     ds
+
+%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
+%if DRVPARAMS.wFlags = 0
+    mov     ax, bx
+%else
     lea     ax, [bx+DRVPARAMS.wFlags]
-    mov     [cs:g_MenuitemMasterSlaveBlockModeTransfers+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
-    mov     [cs:g_MenuitemMasterSlaveChsTranslateMode+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
-    mov     [cs:g_MenuitemMasterSlaveWriteCache+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
-    mov     [cs:g_MenuitemMasterSlaveUserCHS+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
-    mov     [cs:g_MenuitemMasterSlaveUserLBA+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
+%endif
+%endif
+    mov     [g_MenuitemMasterSlaveBlockModeTransfers+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
+    mov     [g_MenuitemMasterSlaveChsTranslateMode+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
+    mov     [g_MenuitemMasterSlaveWriteCache+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
+    mov     [g_MenuitemMasterSlaveUserCHS+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
+    mov     [g_MenuitemMasterSlaveUserLBA+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
 
     lea     ax, [bx+DRVPARAMS.wCylinders]
-    mov     [cs:g_MenuitemMasterSlaveCylinders+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
+    mov     [g_MenuitemMasterSlaveCylinders+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
 
     lea     ax, [bx+DRVPARAMS.bHeads]
-    mov     [cs:g_MenuitemMasterSlaveHeads+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
+    mov     [g_MenuitemMasterSlaveHeads+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
 
     lea     ax, [bx+DRVPARAMS.bSect]
-    mov     [cs:g_MenuitemMasterSlaveSectors+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
+    mov     [g_MenuitemMasterSlaveSectors+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
 
     lea     ax, [bx+DRVPARAMS.dwMaximumLBA]
-    mov     [cs:g_MenuitemMasterSlaveUserLbaValue+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
+    mov     [g_MenuitemMasterSlaveUserLbaValue+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset], ax
+
+    pop     ds
     ret
 
@@ -283 +294 @@
     mov     bx, [g_MenuitemMasterSlaveUserLBA+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
     call    Buffers_GetRomvarsValueToAXfromOffsetInBX
-    test    ax, FLG_DRVPARAMS_USERLBA
+    test    al, FLG_DRVPARAMS_USERLBA
     jnz     SHORT .DisableCHSandEnableLBA
-    test    ax, FLG_DRVPARAMS_USERCHS
+    test    al, FLG_DRVPARAMS_USERCHS
     jnz     SHORT .EnableCHSandDisableLBA
 
@@ -320 +331 @@
 ALIGN JUMP_ALIGN
 .EnableOrDisableCHandS:
-    mov     bx, [cs:g_MenuitemMasterSlaveUserCHS+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
+    mov     bx, [g_MenuitemMasterSlaveUserCHS+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
     call    Buffers_GetRomvarsValueToAXfromOffsetInBX
-    test    ax, FLG_DRVPARAMS_USERCHS
+    test    al, FLG_DRVPARAMS_USERCHS
     jz      SHORT .DisableCHandS
-    test    ax, FLG_DRVPARAMS_USERLBA
+    test    al, FLG_DRVPARAMS_USERLBA
     jnz     SHORT .DisableCHandS
 
@@ -355 +366 @@
 ALIGN JUMP_ALIGN
 .EnableOrDisableUserLbaValue:
-    mov     bx, [cs:g_MenuitemMasterSlaveUserLBA+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
+    mov     bx, [g_MenuitemMasterSlaveUserLBA+MENUITEM.itemValue+ITEM_VALUE.wRomvarsValueOffset]
     call    Buffers_GetRomvarsValueToAXfromOffsetInBX
     mov     bx, g_MenuitemMasterSlaveUserLbaValue
-    test    ax, FLG_DRVPARAMS_USERCHS
+    test    al, FLG_DRVPARAMS_USERCHS
     jnz     SHORT .DisableMenuitemFromCSBX
-    test    ax, FLG_DRVPARAMS_USERLBA
+    test    al, FLG_DRVPARAMS_USERLBA
     jz      SHORT .DisableMenuitemFromCSBX
     ; Fall to .EnableMenuitemFromCSBX
@@ -443 +454 @@
 ALIGN JUMP_ALIGN
 MasterSlaveMenu_WriteCHSFlag:
-    test    word [es:di], FLG_DRVPARAMS_USERCHS
-    jnz     .alreadySet
+    test    BYTE [es:di], FLG_DRVPARAMS_USERCHS
+    jnz     SHORT .AlreadySet
 
     push    ax
@@ -466 +477 @@
     pop     ax
 
-.alreadySet:
+.AlreadySet:
     ret
 
@@ -475 +486 @@
 ALIGN JUMP_ALIGN
 MasterSlaveMenu_WriteLBAFlag:
-    test    word [es:di], FLG_DRVPARAMS_USERLBA
-    jnz     .alreadySet
+    test    BYTE [es:di], FLG_DRVPARAMS_USERLBA
+    jnz     SHORT .AlreadySet
 
     push    ax
@@ -490 +501 @@
     pop     ax
 
-.alreadySet:
+.AlreadySet:
     ret
+

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Strings.asm

@@ -42 +42 @@
 g_szYes:                            db  "Yes",NULL
 
-; Exit messages
+; General Yes/No response type dialog messages
 g_szDlgExitToDos:       db  "Exit to DOS?",NULL
 g_szDlgSaveChanges:     db  "Do you want to save changes to XTIDE Universal BIOS image file?",NULL
-
+g_szDlgDriveNotReady:   db  "Drive not ready! Retry?",NULL
 
 ; Generic dialog strings
@@ -92 +92 @@
 g_szNfoMainFlash:       db  "Flash loaded BIOS image to EEPROM.",NULL
 g_szNfoMainSave:        db  "Save BIOS changes back to original file from which it was loaded.",NULL
-g_szNfoMainLicense:     db  "XTIDE Universal BIOS and XTIDECFG Copyright (C) 2009-2010 by Tomi Tilli, 2011-2016 by XTIDE Universal BIOS Team."
+g_szNfoMainLicense:     db  "XTIDE Universal BIOS and XTIDECFG Copyright (C) 2009-2010 by Tomi Tilli, 2011-2018 by XTIDE Universal BIOS Team."
                         db  " Released under GNU GPL v2, with ABSOLUTELY NO WARRANTY. Press ENTER for more details...",NULL
 g_szNfoMainHomePage:    db  "Visit http://xtideuniversalbios.org (home page) and http://vcfed.org/forum (support)",NULL
 
 g_szHelpMainLicense:    db  "XTIDE Universal BIOS and XTIDECFG Configuration program are Copyright 2009-2010 by Tomi Tilli,"
-                        db  " 2011-2016 by XTIDE Universal BIOS Team. Released under GNU GPL v2. This software comes with ABSOLUTELY NO WARRANTY."
+                        db  " 2011-2018 by XTIDE Universal BIOS Team. Released under GNU GPL v2. This software comes with ABSOLUTELY NO WARRANTY."
                         db  " This is free software, and you are welcome to redistribute it under certain conditions."
                         db  " See the LICENSE.TXT file that was included with this distribution,"
@@ -423 +423 @@
 g_szItemBootDrive:      db  "Default boot drive",NULL
 g_szItemBootDispMode:   db  "Display Mode",NULL
+g_szItemColorTheme:     db  "Color Theme",NULL
 g_szItemBootFloppyDrvs: db  "Number of Floppy Drives",NULL
 g_szItemSerialDetect:   db  "Scan for Serial Drives",NULL
@@ -429 +430 @@
 g_szDlgBootDrive:       db  "Enter default drive number (0xh for Floppy Drives, 8xh for Hard Disks).",NULL
 g_szDlgBootDispMode:    db  "Select display mode.",NULL
+g_szDlgColorTheme:      db  "Select color theme.",NULL
 g_szDlgBootFloppyDrvs:  db  "Select number of Floppy Drives in system.",NULL
 g_szDlgSerialDetect:    db  "Scan for serial drives?",NULL
@@ -435 +437 @@
 g_szNfoBootDrive:       db  "Default boot drive.",NULL
 g_szNfoDispMode:        db  "Display mode to set when booting.",NULL
+g_szNfoColorTheme:      db  "Color theme used by the boot menu and the hotkey bar.",NULL
 g_szNfoBootFloppyDrvs:  db  "Number of Floppy Drives in system.",NULL
 g_szNfoSerialDetect:    db  "Scans all standard COM ports for serial drives."
@@ -442 +445 @@
                         db  " When timer goes to zero, currently selected drive will be booted automatically."
                         db  " Timeout can be disabled by setting this to 0.",NULL
-
 g_szHelpBootDrive:      db  "Drive to be set selected by default when Boot Menu is displayed.",NULL
-
+g_szHelpColorTheme:     db  "Pick a theme from a list of several pre-defined themes to customize the colors used by the boot menu and, if"
+                        db  " available, the hotkey bar. Selecting a theme or loading a BIOS, or its settings, from file or from ROM will"
+                        db  " make XTIDECFG apply the theme to itself for easy preview. The ability to preview themes requires that"
+                        db  " XTIDECFG is running in a display mode that can display colors. In other words, you may configure the"
+                        db  " BIOS on a machine with a monochrome graphics adapter and not be able to preview the theme but the BIOS will"
+                        db  " still use the selected theme when installed in a machine with a color graphics adapter.",NULL
 g_szHelpBootFloppyDrvs: db  "Detecting the correct number of floppy drives might fail when using a floppy controller with its own BIOS."
                         db  " A minimum number of floppy drives can be specified to force non-detected drives to appear on boot menu.",NULL
-
 g_szHelpSerialDetect:   db  "Set to Yes, at the end of normal drive detection, COM ports 1-7 (in reverse order) will be scanned for a connection"
                         db  " to a serial drive server. This option provides flexibility with the COM port and baud rate to be used,"
@@ -468 +474 @@
 g_szValueBootDispModeCO80:      db  "CO80",NULL
 g_szValueBootDispModeMono:      db  "Mono",NULL
+
+g_szMultichoiceColorTheme:      db  "Classic (default)",LF
+                                db  "Argon Blue",LF
+                                db  "Neon Red",LF
+                                db  "Phosphor Green",LF
+                                db  "Moon Surface",LF
+                                db  "Toxic Waste",NULL
+g_szValueColorTheme0:           db  "Classic",NULL
+g_szValueColorTheme1:           db  "Argon",NULL
+g_szValueColorTheme2:           db  "Neon",NULL
+g_szValueColorTheme3:           db  "Phosphor",NULL
+g_szValueColorTheme4:           db  "Moon",NULL
+g_szValueColorTheme5:           db  "Toxic",NULL
 
 g_szMultichoiceBootFloppyDrvs:  db  "Autodetect",LF

trunk/XTIDE_Universal_BIOS_Configurator_v2/makefile

@@ -100 +100 @@
 ASFLAGS += $(IHEADERS)          # Set header file directory paths
 ASFLAGS += -Worphan-labels      # Warn about labels without colon
-ASFLAGS += -O9                  # Optimize operands to their shortest forms
+ASFLAGS += -Ox                  # Optimize operands to their shortest forms
 
 
@@ -135 +135 @@
 xt_unused: xt
     @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_xt_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
-    @perl ..\tools\unused.pl $(TARGET)_xt.lst $(TARGET)_xt_unused.asm
+    @perl ..\Tools\unused.pl $(TARGET)_xt.lst $(TARGET)_xt_unused.asm