Changeset 547 in xtideuniversalbios for trunk/XTIDE_Universal_BIOS/Src/Device/Serial/SerialDPT.asm

Timestamp:

Apr 21, 2013, 3:47:11 PM (11 years ago)

Author:

aitotat@…

google:author:

aitotat@gmail.com

Message:

Changes to XTIDE Universal BIOS:

• Hotkeys were incorrectly initialized to use 'C' as first hard drive letter.
• All CHS translate modes should again work (incorrectly decremented DX instead of DL, it might or might not have caused problems).

File:

• trunk/XTIDE_Universal_BIOS/Src/Device/Serial/SerialDPT.asm (modified) (1 diff)

trunk/XTIDE_Universal_BIOS/Src/Device/Serial/SerialDPT.asm

@@ -48 +48 @@
 
 %ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
-    %if FLGH_DPT_SERIAL_DEVICE != 0x4 || FLGH_DPT_SERIAL_FLOPPY != 0x10 || FLGH_DPT_SERIAL_FLOPPY_TYPE_MASK != 0xe0 || FLGH_DPT_SERIAL_FLOPPY_TYPE_FIELD_POSITION != 5
-        %error "The serial server passes FLGH values into SerialDPT_Finalize directly.  If the flag positions are changed, corresponding changes will need to be made in the serial server, and likely a version check put in to deal with servers talking to incompatible clients"
-    %endif
+    %ifdef MODULE_SERIAL_FLOPPY
+        %if FLGH_DPT_SERIAL_DEVICE != 0x4 || FLGH_DPT_SERIAL_FLOPPY != 0x10 || FLGH_DPT_SERIAL_FLOPPY_TYPE_MASK != 0xe0 || FLGH_DPT_SERIAL_FLOPPY_TYPE_FIELD_POSITION != 5
+            %error "The serial server passes FLGH values into SerialDPT_Finalize directly.  If the flag positions are changed, corresponding changes will need to be made in the serial server, and likely a version check put in to deal with servers talking to incompatible clients"
+        %endif
+    %else
+        %if FLGH_DPT_SERIAL_DEVICE != 0x4
+            %error "The serial server passes FLGH values into SerialDPT_Finalize directly.  If the flag positions are changed, corresponding changes will need to be made in the serial server, and likely a version check put in to deal with servers talking to incompatible clients"
+        %endif
+    %endif ; MODULE_SERIAL_FLOPPY
 %endif