Ignore:
Timestamp:
Feb 4, 2012, 6:21:22 PM (13 years ago)
Author:
gregli@…
google:author:
gregli@hotmail.com
Message:

Serial Port: split single byte port and baud into two bytes, taking advantage of the two bytes in DPT_SERIAL, which supports more serial baud rates and in particular fixed a bug where a 4x client machine couldn't talk to a 115.2K server machine. This is a wide change, touching lots of files, but most are shallow changes. DetectPrint.asm took the most significant changes, now it calculates the baud rate to display instead of using characters provided by the Configurator. The Configurator now has a new menu flag, FLG_MENUITEM_CHOICESTRINGS, for specifying that values are not linear and they should be lookedup rather than indexed. Finally, another important bug fixed here is that in some error cases, the serial port code could get into an infinite loop waiting ont the hardware; now it has a timeout.

File:
1 edited

Legend:

Unmodified
Added
Removed

  • trunk/XTIDE_Universal_BIOS_Configurator_v2/Inc/Help/IDE_SerialPort.txt

    r203 r233  
    1 Select a serial port by I/O address. Supported values are between 240h and 430h, and must be on an 8-byte boundary. If the entered value corresponds to one of the established COM port numbers, then the selection of serial port will use COM numbers instead.
     1Select a serial port by I/O address. Any port address is supported up to 3f8h, but must be on an 8-byte boundary. If the entered value corresponds to one of the established COM port numbers, then the selection will snap to that COM port and "COMx" must be selected again for custom I/O address entry.
Note: See TracChangeset for help on using the changeset viewer.