Context Navigation

source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 622

Visit:

Last change on this file since 622 was 622, checked in by Tomi Tilli, 3 years ago
Supported VLB controllers are now forced to 32-bit mode on 386 builds only. AT builds use 16-bit transfers unless configured to 32-bit from xtidecfg Partially fixed support for PDC 20230C VLB IDE controller. PIO-1 drives stay at PIO-0 but PIO-2, 3 and 4 drives are set to maximum speed that PDC2030C supports Large 386 build is now 12k instead of 10k (did not fit to 10k because of the fixes)
File size: 15.1 KB

Rev	Line
[445]	1	####################################################################################################
	2	# Makefile to build XTIDE Universal BIOS. #
	3	# #
	4	# Valid makefile targets are: #
[618]	5	# all Removes existing files and builds binary files in \Build (without checksums) #
	6	# small Builds only binaries smaller than or equal to 8 kiB (without checksums) #
	7	# large Builds only binaries larger than 8 kiB (without checksums) #
	8	# custom Builds custom binary without checksum (change DEFINES_CUSTOM / BIOS_SIZE_CUSTOM first) #
[445]	9	# clean Removes all files from \Build #
[618]	10	# checksum* Same as 'all' but also applies checksums to the binaries #
[445]	11	# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
[511]	12	# unused* Checks if there are any unused functions that can be removed to save space #
[445]	13	# #
	14	# * at the end of target name means that Perl is required for the job. #
	15	# Build directory must be created manually if it does not exist. #
	16	# #
	17	# #
	18	# Following modules can be included or excluded: #
	19	# MODULE_8BIT_IDE Support for 8-BIT IDE cards like XTIDE #
[505]	20	# MODULE_8BIT_IDE_ADVANCED Support for memory mapped and DMA based cards like JRIDE and XTCF #
[589]	21	# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers (requires USE_386) #
[550]	22	# MODULE_COMPATIBLE_TABLES Support for ill behaving software that tries to access DPT directly #
[445]	23	# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
	24	# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
	25	# MODULE_HOTKEYS Hotkey Bar to boot from any drive #
	26	# MODULE_IRQ IDE IRQ support #
	27	# MODULE_SERIAL Virtual hard disks using serial port #
	28	# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
	29	# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
[567]	30	# MODULE_VERY_LATE_INIT Initialize on INT 13h if our INT 19h handler is not called #
	31	# MODULE_POWER_MANAGEMENT Power Management support #
[605]	32	# MODULE_WIN9X_CMOS_HACK Hack for Windows 9x compatibility #
[594]	33	# MODULE_MFM_COMPATIBILITY Restores BDA drive count for MFM controllers that expect to be the #
	34	# only hard drive controller on the system #
[445]	35	# #
	36	# Not modules but these affect the assembly: #
	37	# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
[522]	38	# RELOCATE_INT13H_STACK ** Relocates INT 13h stack to beginning of stolen conventional memory #
[580]	39	# NO_ATAID_VALIDATION *** Excludes code that tries to ensure proper communication with drives #
[618]	40	# NO_ATAID_CORRECTION Excludes code that corrects illegal CHS values from some CF cards #
[445]	41	# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
[511]	42	# USE_286 Use instructions supported by 286 and later (defines USE_UNDOC_INTEL)#
	43	# USE_386 Use instructions supported by 386 and later (defines USE_286) #
[445]	44	# USE_AT Use features supported on AT and later systems (not available on XT) #
[491]	45	# USE_UNDOC_INTEL Optimizations for Intel CPU:s - do NOT use on NEC V20/V30/Sony CPU:s #
[593]	46	# USE_NEC_V Optimizations for use with NEC V20/V30 processors only #
[592]	47	# CLD_NEEDED Only needed for compatibility with buggy software/BIOSes #
[445]	48	# #
[522]	49	# ** AT Builds only (when USE_AT is defined) #
[580]	50	# *** Use this only when certain known good drives are not being detected (eg WD Caviars) #
[445]	51	####################################################################################################
[3]	52
	53	###########################################
	54	# Source files and destination executable #
	55	###########################################
	56
	57	# Assembly source code file (*.asm):
	58	SRC_ASM = Src/Main.asm
	59
	60	# Program executable file name without extension:
	61	PROG = ide
	62
	63
	64	#######################################
	65	# Destination and include directories #
	66	#######################################
	67
	68	# Directory where binary file will be compiled to
	69	BUILD_DIR = Build
	70
	71	# Subdirectories where included files are:
	72	HEADERS = Inc/
[363]	73	HEADERS += Inc/Controllers/
[3]	74	HEADERS += Src/
	75	HEADERS += Src/Handlers/
	76	HEADERS += Src/Handlers/Int13h/
[165]	77	HEADERS += Src/Handlers/Int13h/EBIOS/
	78	HEADERS += Src/Handlers/Int13h/Tools/
[392]	79	HEADERS += Src/Handlers/Int19h/
[150]	80	HEADERS += Src/Device/
	81	HEADERS += Src/Device/IDE/
[238]	82	HEADERS += Src/Device/MemoryMappedIDE/
[150]	83	HEADERS += Src/Device/Serial/
[3]	84	HEADERS += Src/Initialization/
[392]	85	HEADERS += Src/Initialization/AdvancedAta/
	86	HEADERS += Src/Menus/
	87	HEADERS += Src/Menus/BootMenu/
[3]	88	HEADERS += Src/Libraries/
	89	HEADERS += Src/VariablesAndDPTs/
	90
[88]	91	# Subdirectories where library files are:
	92	LIBS = ../Assembly_Library/Inc/
	93	LIBS += ../Assembly_Library/Src/
	94	LIBS += ../Assembly_Library/Src/Display/
	95	LIBS += ../Assembly_Library/Src/File/
	96	LIBS += ../Assembly_Library/Src/Keyboard/
	97	LIBS += ../Assembly_Library/Src/Menu/
	98	LIBS += ../Assembly_Library/Src/Menu/Dialog/
	99	LIBS += ../Assembly_Library/Src/String/
	100	LIBS += ../Assembly_Library/Src/Time/
	101	LIBS += ../Assembly_Library/Src/Util/
[277]	102	LIBS += ../Assembly_Library/Src/Serial/
[88]	103	LIBS += ../XTIDE_Universal_BIOS/Inc/
	104	HEADERS += $(LIBS)
[3]	105
[88]	106
[618]	107	##################################
	108	# Assembler preprocessor defines #
	109	##################################
[606]	110	DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_EBIOS MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_POWER_MANAGEMENT NO_ATAID_VALIDATION CLD_NEEDED
[550]	111	DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE_ADVANCED MODULE_COMPATIBLE_TABLES
[389]	112
[567]	113	DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE_ADVANCED
[580]	114	DEFINES_XTPLUS = $(DEFINES_XT) USE_186
[589]	115	DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 MODULE_IRQ MODULE_COMPATIBLE_TABLES
[618]	116	DEFINES_386 = $(DEFINES_AT) USE_386 MODULE_ADVANCED_ATA MODULE_WIN9X_CMOS_HACK
[389]	117
[397]	118	DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE)
	119	DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE)
[482]	120	DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
[598]	121	DEFINES_386_LARGE = $(DEFINES_386) $(DEFINES_COMMON_LARGE)
[3]	122
[618]	123	DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE NO_ATAID_VALIDATION NO_ATAID_CORRECTION CLD_NEEDED
[3]	124
[618]	125	DEFINES_CUSTOM = ?
	126
	127
[3]	128	###################
	129	# Other variables #
	130	###################
	131
[603]	132	# Target size of the BIOS, used in Main.asm for number of 512B blocks (CNT_ROM_BLOCKS) and by checksum Perl script below ('make checksum').
[592]	133	# Note! The size must be a multiple of 2 KB for compatibility reasons.
	134	BIOS_SIZE_TINY = 4096
	135	BIOS_SIZE_SMALL = 8192
[622]	136	BIOS_SIZE_LARGE = 12288
[618]	137	BIOS_SIZE_CUSTOM = ?
[239]	138
[3]	139	# Add -D in front of every preprocessor define declaration
[592]	140	DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
	141	DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
	142	DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
[506]	143	DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
	144	DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
	145	DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
[592]	146	DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_TINY)
[593]	147	DEFS_386 = $(DEFINES_386:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
	148	DEFS_386_LARGE = $(DEFINES_386_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
[618]	149	DEFS_CUSTOM = $(DEFINES_CUSTOM:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_CUSTOM)
[3]	150
	151	# Add -I in front of all header directories
	152	IHEADERS = $(HEADERS:%=-I%)
	153
[145]	154	# Path + target file to be built
[3]	155	TARGET = $(BUILD_DIR)/$(PROG)
	156
[618]	157
[3]	158	#########################
	159	# Compilers and linkers #
	160	#########################
	161
	162	# Make
	163	MAKE = mingw32-make.exe
	164
	165	# Assembler
[188]	166	AS = nasm.exe
[3]	167
	168	# use this command to erase files.
	169	RM = -del /Q
	170
	171
	172	#############################
	173	# Compiler and linker flags #
	174	#############################
	175
	176	# Assembly compiler flags
	177	ASFLAGS = -f bin # Produce binary object files
	178	ASFLAGS += $(IHEADERS) # Set header file directory paths
	179	ASFLAGS += -Worphan-labels # Warn about labels without colon
[379]	180	ASFLAGS += -Ox # Optimize operands to their shortest forms
[3]	181
	182
	183	############################################
	184	# Build process. Actual work is done here. #
	185	############################################
	186
[272]	187	all: clean small large
[145]	188	@echo All done!
[3]	189
[593]	190	small: xt_tiny xt xtplus at 386
[506]	191	@echo All small binaries built!
[272]	192
[593]	193	large: xt_large xtplus_large at_large 386_large
[506]	194	@echo All large binaries built!
[272]	195
[3]	196	at:
[80]	197	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
[506]	198	@echo * Small AT version "$(TARGET)_at.bin" built.
[3]	199
[238]	200	at_large:
	201	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
[558]	202	@echo * Large AT version "$(TARGET)_atl.bin" built.
[238]	203
[3]	204	xtplus:
[80]	205	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
[506]	206	@echo * Small XT Plus version "$(TARGET)_xtp.bin" built.
[3]	207
[238]	208	xtplus_large:
	209	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
[558]	210	@echo * Large XT Plus version "$(TARGET)_xtpl.bin" built.
[238]	211
[3]	212	xt:
[80]	213	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
[506]	214	@echo * Small XT version "$(TARGET)_xt.bin" built.
[3]	215
[238]	216	xt_large:
	217	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
[558]	218	@echo * Large XT version "$(TARGET)_xtl.bin" built.
[277]	219
[397]	220	xt_tiny:
	221	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin"
	222	@echo * Tiny XT version "$(TARGET)_tiny.bin" built.
[238]	223
[593]	224	386:
	225	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
[506]	226	@echo * Small 386 version "$(TARGET)_386.bin" built.
[366]	227
[593]	228	386_large:
	229	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -l"$(TARGET)_386l.lst" -o"$(TARGET)_386l.bin"
	230	@echo * Large 386 version "$(TARGET)_386l.bin" built.
	231
[618]	232	custom:
[621]	233	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_CUSTOM) -l"$(TARGET)_cstm.lst" -o"$(TARGET)_cstm.bin"
	234	@echo * Custom version "$(TARGET)_cstm.bin" built.
[618]	235
[322]	236	strings: src\Strings.asm
[415]	237	@$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
[592]	238	@perl ..\Tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
[322]	239	@echo StringsCompressed.asm updated!
[252]	240
[3]	241	clean:
	242	@$(RM) $(BUILD_DIR)\.
	243	@echo Deleted "(.)" from "$(BUILD_DIR)/"
[186]	244
[294]	245	checksum: all
[592]	246	@perl ..\Tools\checksum.pl $(TARGET)_tiny.bin $(BIOS_SIZE_TINY)
	247	@perl ..\Tools\checksum.pl $(TARGET)_xt.bin $(BIOS_SIZE_SMALL)
	248	@perl ..\Tools\checksum.pl $(TARGET)_xtp.bin $(BIOS_SIZE_SMALL)
	249	@perl ..\Tools\checksum.pl $(TARGET)_at.bin $(BIOS_SIZE_SMALL)
	250	@perl ..\Tools\checksum.pl $(TARGET)_xtl.bin $(BIOS_SIZE_LARGE)
	251	@perl ..\Tools\checksum.pl $(TARGET)_xtpl.bin $(BIOS_SIZE_LARGE)
	252	@perl ..\Tools\checksum.pl $(TARGET)_atl.bin $(BIOS_SIZE_LARGE)
	253	@perl ..\Tools\checksum.pl $(TARGET)_386.bin $(BIOS_SIZE_SMALL)
[593]	254	@perl ..\Tools\checksum.pl $(TARGET)_386l.bin $(BIOS_SIZE_LARGE)
[203]	255
[491]	256	unused:
[596]	257	@echo "XT Tiny"
	258	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -o"$(TARGET)_unused_tiny.asm" -l"$(TARGET)_unused_tiny.lst"
	259	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -o"$(TARGET)_unused_tiny.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
	260	@perl ..\Tools\unused.pl $(TARGET)_unused_tiny.lst $(TARGET)_unused_tiny.asm
[489]	261	@echo "XT Small"
	262	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst"
	263	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]	264	@perl ..\Tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm
[489]	265	@echo "XT Large"
	266	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst"
	267	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]	268	@perl ..\Tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm
[596]	269	@echo "XT Plus Small"
	270	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -o"$(TARGET)_unused_xtp.asm" -l"$(TARGET)_unused_xtp.lst"
	271	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -o"$(TARGET)_unused_xtp.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
	272	@perl ..\Tools\unused.pl $(TARGET)_unused_xtp.lst $(TARGET)_unused_xtp.asm
	273	@echo "XT Plus Large"
	274	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -o"$(TARGET)_unused_xtpl.asm" -l"$(TARGET)_unused_xtpl.lst"
	275	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -o"$(TARGET)_unused_xtpl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
	276	@perl ..\Tools\unused.pl $(TARGET)_unused_xtpl.lst $(TARGET)_unused_xtpl.asm
[489]	277	@echo "AT Small"
	278	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst"
	279	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]	280	@perl ..\Tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm
[489]	281	@echo "AT Large"
	282	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst"
	283	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]	284	@perl ..\Tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm
[596]	285	@echo "386 Small"
	286	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -o"$(TARGET)_unused_386.asm" -l"$(TARGET)_unused_386.lst"
	287	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -o"$(TARGET)_unused_386.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
	288	@perl ..\Tools\unused.pl $(TARGET)_unused_386.lst $(TARGET)_unused_386.asm
	289	@echo "386 Large"
	290	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -o"$(TARGET)_unused_386l.asm" -l"$(TARGET)_unused_386l.lst"
	291	@$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -o"$(TARGET)_unused_386l.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
	292	@perl ..\Tools\unused.pl $(TARGET)_unused_386l.lst $(TARGET)_unused_386l.asm
[194]	293

Note: See TracBrowser for help on using the repository browser.

Download in other formats: