1 | ; Project name : XTIDE Universal BIOS
|
---|
2 | ; Authors : Tomi Tilli
|
---|
3 | ; : aitotat@gmail.com
|
---|
4 | ; :
|
---|
5 | ; : Krister Nordvall
|
---|
6 | ; : krille_n_@hotmail.com
|
---|
7 | ; :
|
---|
8 | ; Description : Main file for BIOS. This is the only file that needs
|
---|
9 | ; to be compiled since other files are included to this
|
---|
10 | ; file (so no linker needed, Nasm does it all).
|
---|
11 |
|
---|
12 | ORG 000h ; Code start offset 0000h
|
---|
13 |
|
---|
14 |
|
---|
15 | ; Included .inc files
|
---|
16 | %include "AssemblyLibrary.inc" ; Assembly Library. Must be included first!
|
---|
17 | %include "BiosData.inc" ; For BIOS Data area equates
|
---|
18 | %include "Interrupts.inc" ; For interrupt equates
|
---|
19 | %include "ATA_ID.inc" ; For ATA Drive Information structs
|
---|
20 | %include "IdeRegisters.inc" ; For ATA Registers, flags and commands
|
---|
21 | %include "Int13h.inc" ; Equates for INT 13h functions
|
---|
22 | %include "CustomDPT.inc" ; For Disk Parameter Table
|
---|
23 | %include "RomVars.inc" ; For ROMVARS and IDEVARS structs
|
---|
24 | %include "RamVars.inc" ; For RAMVARS struct
|
---|
25 | %include "BootVars.inc" ; For BOOTVARS and BOOTNFO structs
|
---|
26 | %include "BootMenu.inc" ; For Boot Menu
|
---|
27 | %include "IDE_8bit.inc" ; For IDE 8-bit data port macros
|
---|
28 |
|
---|
29 |
|
---|
30 | ; Section containing code
|
---|
31 | SECTION .text
|
---|
32 |
|
---|
33 | ; ROM variables (must start at offset 0)
|
---|
34 | CNT_ROM_BLOCKS EQU 16 ; 16 * 512B = 8kB BIOS
|
---|
35 | istruc ROMVARS
|
---|
36 | at ROMVARS.wRomSign, dw 0AA55h ; PC ROM signature
|
---|
37 | at ROMVARS.bRomSize, db CNT_ROM_BLOCKS ; ROM size in 512B blocks
|
---|
38 | at ROMVARS.rgbJump, jmp Initialize_FromMainBiosRomSearch
|
---|
39 | at ROMVARS.rgbSign, db "XTIDE120" ; Signature for flash program
|
---|
40 | at ROMVARS.szTitle
|
---|
41 | db "-=XTIDE Universal BIOS"
|
---|
42 | %ifdef USE_AT
|
---|
43 | db " (AT)=-",NULL
|
---|
44 | %elifdef USE_186
|
---|
45 | db " (XT+)=-",NULL
|
---|
46 | %else
|
---|
47 | db " (XT)=-",NULL
|
---|
48 | %endif
|
---|
49 | at ROMVARS.szVersion, db "v1.2.0_wip (",__DATE__,")",NULL
|
---|
50 |
|
---|
51 | ;---------------------------;
|
---|
52 | ; AT Build default settings ;
|
---|
53 | ;---------------------------;
|
---|
54 | %ifdef USE_AT
|
---|
55 | at ROMVARS.wFlags, dw FLG_ROMVARS_FULLMODE | FLG_ROMVARS_DRVXLAT
|
---|
56 | at ROMVARS.bIdeCnt, db 3 ; Number of supported controllers
|
---|
57 | at ROMVARS.bBootDrv, db 80h ; Boot Menu default drive
|
---|
58 | at ROMVARS.bBootDelay, db 30 ; Boot Menu selection delay (secs)
|
---|
59 | at ROMVARS.bMinFddCnt, db 0 ; Do not force minimum number of floppy drives
|
---|
60 | at ROMVARS.bStealSize, db 1 ; Steal 1kB from base memory
|
---|
61 |
|
---|
62 | at ROMVARS.ideVars0+IDEVARS.wPort, dw 1F0h ; Controller Command Block base port
|
---|
63 | at ROMVARS.ideVars0+IDEVARS.wPortCtrl, dw 3F0h ; Controller Control Block base port
|
---|
64 | at ROMVARS.ideVars0+IDEVARS.bBusType, db BUS_TYPE_16 ; Bus type
|
---|
65 | at ROMVARS.ideVars0+IDEVARS.bIRQ, db 14 ; IRQ
|
---|
66 | at ROMVARS.ideVars0+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
|
---|
67 | at ROMVARS.ideVars0+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
|
---|
68 |
|
---|
69 | at ROMVARS.ideVars1+IDEVARS.wPort, dw 170h ; Controller Command Block base port
|
---|
70 | at ROMVARS.ideVars1+IDEVARS.wPortCtrl, dw 370h ; Controller Control Block base port
|
---|
71 | at ROMVARS.ideVars1+IDEVARS.bBusType, db BUS_TYPE_16 ; Bus type
|
---|
72 | at ROMVARS.ideVars1+IDEVARS.bIRQ, db 15 ; IRQ
|
---|
73 | at ROMVARS.ideVars1+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
|
---|
74 | at ROMVARS.ideVars1+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
|
---|
75 |
|
---|
76 | at ROMVARS.ideVars2+IDEVARS.wPort, dw 300h ; Controller Command Block base port
|
---|
77 | at ROMVARS.ideVars2+IDEVARS.wPortCtrl, dw 308h ; Controller Control Block base port
|
---|
78 | at ROMVARS.ideVars2+IDEVARS.bBusType, db BUS_TYPE_8_DUAL ; Bus type
|
---|
79 | at ROMVARS.ideVars2+IDEVARS.bIRQ, db 0 ; IRQ
|
---|
80 | at ROMVARS.ideVars2+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
|
---|
81 | at ROMVARS.ideVars2+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
|
---|
82 | %else
|
---|
83 | ;-----------------------------------;
|
---|
84 | ; XT and XT+ Build default settings ;
|
---|
85 | ;-----------------------------------;
|
---|
86 | at ROMVARS.wFlags, dw FLG_ROMVARS_DRVXLAT
|
---|
87 | at ROMVARS.bIdeCnt, db 1 ; Number of supported controllers
|
---|
88 | at ROMVARS.bBootDrv, db 80h ; Boot Menu default drive
|
---|
89 | at ROMVARS.bBootDelay, db 30 ; Boot Menu selection delay (secs)
|
---|
90 | at ROMVARS.bMinFddCnt, db 1 ; Assume at least 1 floppy drive present if autodetect fails
|
---|
91 | at ROMVARS.bStealSize, db 1 ; Steal 1kB from base memory in full mode
|
---|
92 |
|
---|
93 | at ROMVARS.ideVars0+IDEVARS.wPort, dw 300h ; Controller Command Block base port
|
---|
94 | at ROMVARS.ideVars0+IDEVARS.wPortCtrl, dw 308h ; Controller Control Block base port
|
---|
95 | at ROMVARS.ideVars0+IDEVARS.bBusType, db BUS_TYPE_8_DUAL ; Bus type
|
---|
96 | at ROMVARS.ideVars0+IDEVARS.bIRQ, db 0 ; IRQ
|
---|
97 | at ROMVARS.ideVars0+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
|
---|
98 | at ROMVARS.ideVars0+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
|
---|
99 | %endif
|
---|
100 | iend
|
---|
101 |
|
---|
102 |
|
---|
103 | ; Include .asm files (static data and libraries)
|
---|
104 | %include "AssemblyLibrary.asm"
|
---|
105 | %include "Strings.asm" ; For BIOS message strings
|
---|
106 |
|
---|
107 | ; Include .asm files (Initialization and drive detection)
|
---|
108 | %include "Initialize.asm" ; For BIOS initialization
|
---|
109 | %include "Interrupts.asm" ; For Interrupt initialization
|
---|
110 | %include "RamVars.asm" ; For RAMVARS initialization and access
|
---|
111 | %include "CreateDPT.asm" ; For creating DPTs
|
---|
112 | %include "FindDPT.asm" ; For finding DPTs
|
---|
113 | %include "AccessDPT.asm" ; For accessing DPTs
|
---|
114 | %include "BootInfo.asm" ; For creating BOOTNFO structs
|
---|
115 | %include "AtaID.asm" ; For ATA Identify Device information
|
---|
116 | %include "DetectDrives.asm" ; For detecting IDE drives
|
---|
117 | %include "DetectPrint.asm" ; For printing drive detection strings
|
---|
118 |
|
---|
119 | ; Include .asm files (boot menu)
|
---|
120 | %include "BootVars.asm" ; For accessing BOOTVARS struct
|
---|
121 | %include "BootMenu.asm" ; For Boot Menu operations
|
---|
122 | %include "BootMenuEvent.asm" ; For menu library event handling
|
---|
123 | %include "FloppyDrive.asm" ; Floppy Drive related functions
|
---|
124 | %include "BootSector.asm" ; For loading boot sector
|
---|
125 | %include "BootPrint.asm" ; For printing boot information
|
---|
126 | %include "BootMenuPrint.asm" ; For printing Boot Menu strings
|
---|
127 | %include "BootMenuPrintCfg.asm" ; For printing hard disk configuration
|
---|
128 |
|
---|
129 | ; Include .asm files (general drive accessing)
|
---|
130 | %include "DriveXlate.asm" ; For swapping drive numbers
|
---|
131 | %include "HAddress.asm" ; For sector address translations
|
---|
132 | %include "HCapacity.asm" ; For calculating drive capacity
|
---|
133 | %include "HError.asm" ; For error checking
|
---|
134 | %include "HPIO.asm" ; For PIO transfers
|
---|
135 | %include "HIRQ.asm" ; For IRQ handling
|
---|
136 | %include "HStatus.asm" ; For reading hard disk status
|
---|
137 | %include "HDrvSel.asm" ; For selecting drive to access
|
---|
138 | %include "HCommand.asm" ; For outputting command and parameters
|
---|
139 |
|
---|
140 | ; Include .asm files (Interrupt handlers)
|
---|
141 | %include "Int13h.asm" ; For Int 13h, Disk functions
|
---|
142 | %ifndef USE_AT
|
---|
143 | %include "Int19hLate.asm" ; For late initialization
|
---|
144 | %endif
|
---|
145 | %include "Int19hMenu.asm" ; For Int 19h, Boot Loader for Boot Menu
|
---|
146 |
|
---|
147 | ; Include .asm files (Hard Disk BIOS functions)
|
---|
148 | %include "AH0h_HReset.asm" ; Required by Int13h_Jump.asm
|
---|
149 | %include "AH1h_HStatus.asm" ; Required by Int13h_Jump.asm
|
---|
150 | %include "AH2h_HRead.asm" ; Required by Int13h_Jump.asm
|
---|
151 | %include "AH3h_HWrite.asm" ; Required by Int13h_Jump.asm
|
---|
152 | %include "AH4h_HVerify.asm" ; Required by Int13h_Jump.asm
|
---|
153 | %include "AH8h_HParams.asm" ; Required by Int13h_Jump.asm
|
---|
154 | %include "AH9h_HInit.asm" ; Required by Int13h_Jump.asm
|
---|
155 | %include "AHCh_HSeek.asm" ; Required by Int13h_Jump.asm
|
---|
156 | %include "AHDh_HReset.asm" ; Required by Int13h_Jump.asm
|
---|
157 | %include "AH10h_HReady.asm" ; Required by Int13h_Jump.asm
|
---|
158 | %include "AH11h_HRecal.asm" ; Required by Int13h_Jump.asm
|
---|
159 | %include "AH15h_HSize.asm" ; Required by Int13h_Jump.asm
|
---|
160 | %include "AH23h_HFeatures.asm" ; Required by Int13h_Jump.asm
|
---|
161 | %include "AH24h_HSetBlocks.asm" ; Required by Int13h_Jump.asm
|
---|
162 | %include "AH25h_HDrvID.asm" ; Required by Int13h_Jump.asm
|
---|
163 |
|
---|
164 |
|
---|
165 |
|
---|
166 | ; Fill with zeroes until size is what we want
|
---|
167 | ;times (CNT_ROM_BLOCKS*512)-($-$$) db 0
|
---|