source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Main.asm @ 97

Last change on this file since 97 was 97, checked in by aitotat, 13 years ago

Changes to XTIDE Universal BIOS:

  • Inlined some initialization functions.
  • Removed alignment bytes from some initialization functions.
  • Removed creation of compatible DPTs.
File size: 7.7 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Authors       :   Tomi Tilli
3;               :   aitotat@gmail.com
4;               :
5;               :   Krister Nordvall
6;               :   krille_n_@hotmail.com
7;               :
8; Description   :   Main file for BIOS. This is the only file that needs
9;                   to be compiled since other files are included to this
10;                   file (so no linker needed, Nasm does it all).
11
12ORG 000h                        ; Code start offset 0000h
13
14
15; Included .inc files
16%include "AssemblyLibrary.inc"  ; Assembly Library. Must be included first!
17%include "macros.inc"           ; General purpose macros
18%include "BiosData.inc"         ; For BIOS Data area equates
19%include "Interrupts.inc"       ; For interrupt equates
20%include "ATA_ID.inc"           ; For ATA Drive Information structs
21%include "IdeRegisters.inc"     ; For ATA Registers, flags and commands
22%include "Int13h.inc"           ; Equates for INT 13h functions
23%include "CustomDPT.inc"        ; For Disk Parameter Table
24%include "RomVars.inc"          ; For ROMVARS and IDEVARS structs
25%include "RamVars.inc"          ; For RAMVARS struct
26%include "BootVars.inc"         ; For BOOTVARS and BOOTNFO structs
27%include "BootMenu.inc"         ; For Boot Menu
28%include "IDE_8bit.inc"         ; For IDE 8-bit data port macros
29
30
31; Section containing code
32SECTION .text
33
34; ROM variables (must start at offset 0)
35CNT_ROM_BLOCKS      EQU     16  ; 16 * 512B = 8kB BIOS
36istruc ROMVARS
37    at  ROMVARS.wRomSign,   dw  0AA55h          ; PC ROM signature
38    at  ROMVARS.bRomSize,   db  CNT_ROM_BLOCKS  ; ROM size in 512B blocks
39    at  ROMVARS.rgbJump,    jmp Initialize_FromMainBiosRomSearch
40    at  ROMVARS.rgbSign,    db  "XTIDE120"      ; Signature for flash program
41    at  ROMVARS.szTitle
42        db  "-=XTIDE Universal BIOS"
43%ifdef USE_AT
44        db  " (AT)=-",NULL
45%elifdef USE_186
46        db  " (XT+)=-",NULL
47%else
48        db  " (XT)=-",NULL
49%endif
50    at  ROMVARS.szVersion,  db  "v1.2.0_wip (",__DATE__,")",NULL
51
52;---------------------------;
53; AT Build default settings ;
54;---------------------------;
55%ifdef USE_AT
56    at  ROMVARS.wFlags,         dw  FLG_ROMVARS_FULLMODE | FLG_ROMVARS_DRVXLAT
57    at  ROMVARS.bIdeCnt,        db  3                       ; Number of supported controllers
58    at  ROMVARS.bBootDrv,       db  80h                     ; Boot Menu default drive
59    at  ROMVARS.bBootDelay,     db  30                      ; Boot Menu selection delay (secs)
60    at  ROMVARS.bMinFddCnt,     db  0                       ; Do not force minimum number of floppy drives
61    at  ROMVARS.bStealSize,     db  1                       ; Steal 1kB from base memory
62
63    at  ROMVARS.ideVars0+IDEVARS.wPort,         dw  1F0h            ; Controller Command Block base port
64    at  ROMVARS.ideVars0+IDEVARS.wPortCtrl,     dw  3F0h            ; Controller Control Block base port
65    at  ROMVARS.ideVars0+IDEVARS.bBusType,      db  BUS_TYPE_16     ; Bus type
66    at  ROMVARS.ideVars0+IDEVARS.bIRQ,          db  14              ; IRQ
67    at  ROMVARS.ideVars0+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  db  FLG_DRVPARAMS_BLOCKMODE
68    at  ROMVARS.ideVars0+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   db  FLG_DRVPARAMS_BLOCKMODE
69
70    at  ROMVARS.ideVars1+IDEVARS.wPort,         dw  170h            ; Controller Command Block base port
71    at  ROMVARS.ideVars1+IDEVARS.wPortCtrl,     dw  370h            ; Controller Control Block base port
72    at  ROMVARS.ideVars1+IDEVARS.bBusType,      db  BUS_TYPE_16     ; Bus type
73    at  ROMVARS.ideVars1+IDEVARS.bIRQ,          db  15              ; IRQ
74    at  ROMVARS.ideVars1+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  db  FLG_DRVPARAMS_BLOCKMODE
75    at  ROMVARS.ideVars1+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   db  FLG_DRVPARAMS_BLOCKMODE
76
77    at  ROMVARS.ideVars2+IDEVARS.wPort,         dw  300h            ; Controller Command Block base port
78    at  ROMVARS.ideVars2+IDEVARS.wPortCtrl,     dw  308h            ; Controller Control Block base port
79    at  ROMVARS.ideVars2+IDEVARS.bBusType,      db  BUS_TYPE_8_DUAL ; Bus type
80    at  ROMVARS.ideVars2+IDEVARS.bIRQ,          db  0               ; IRQ
81    at  ROMVARS.ideVars2+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  db  FLG_DRVPARAMS_BLOCKMODE
82    at  ROMVARS.ideVars2+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   db  FLG_DRVPARAMS_BLOCKMODE
83%else
84;-----------------------------------;
85; XT and XT+ Build default settings ;
86;-----------------------------------;
87    at  ROMVARS.wFlags,         dw  FLG_ROMVARS_DRVXLAT
88    at  ROMVARS.bIdeCnt,        db  1                       ; Number of supported controllers
89    at  ROMVARS.bBootDrv,       db  80h                     ; Boot Menu default drive
90    at  ROMVARS.bBootDelay,     db  30                      ; Boot Menu selection delay (secs)
91    at  ROMVARS.bMinFddCnt,     db  1                       ; Assume at least 1 floppy drive present if autodetect fails
92    at  ROMVARS.bStealSize,     db  1                       ; Steal 1kB from base memory in full mode
93
94    at  ROMVARS.ideVars0+IDEVARS.wPort,         dw  300h            ; Controller Command Block base port
95    at  ROMVARS.ideVars0+IDEVARS.wPortCtrl,     dw  308h            ; Controller Control Block base port
96    at  ROMVARS.ideVars0+IDEVARS.bBusType,      db  BUS_TYPE_8_DUAL ; Bus type
97    at  ROMVARS.ideVars0+IDEVARS.bIRQ,          db  0               ; IRQ
98    at  ROMVARS.ideVars0+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  db  FLG_DRVPARAMS_BLOCKMODE
99    at  ROMVARS.ideVars0+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   db  FLG_DRVPARAMS_BLOCKMODE
100%endif
101iend
102
103
104; Include .asm files (static data and libraries)
105%include "AssemblyLibrary.asm"
106%include "Strings.asm"          ; For BIOS message strings
107
108; Include .asm files (Initialization and drive detection)
109%include "Initialize.asm"       ; For BIOS initialization
110%include "Interrupts.asm"       ; For Interrupt initialization
111%include "RamVars.asm"          ; For RAMVARS initialization and access
112%include "CreateDPT.asm"        ; For creating DPTs
113%include "FindDPT.asm"          ; For finding DPTs
114%include "AccessDPT.asm"        ; For accessing DPTs
115%include "BootInfo.asm"         ; For creating BOOTNFO structs
116%include "AtaID.asm"            ; For ATA Identify Device information
117%include "DetectDrives.asm"     ; For detecting IDE drives
118%include "DetectPrint.asm"      ; For printing drive detection strings
119
120; Include .asm files (boot menu)
121%include "BootVars.asm"         ; For accessing BOOTVARS struct
122%include "BootMenu.asm"         ; For Boot Menu operations
123%include "BootMenuEvent.asm"    ; For menu library event handling
124%include "FloppyDrive.asm"      ; Floppy Drive related functions
125%include "BootSector.asm"       ; For loading boot sector
126%include "BootPrint.asm"        ; For printing boot information
127%include "BootMenuPrint.asm"    ; For printing Boot Menu strings
128%include "BootMenuPrintCfg.asm" ; For printing hard disk configuration
129
130; Include .asm files (general drive accessing)
131%include "DriveXlate.asm"       ; For swapping drive numbers
132%include "HAddress.asm"         ; For sector address translations
133%include "HCapacity.asm"        ; For calculating drive capacity
134%include "HError.asm"           ; For error checking
135%include "HPIO.asm"             ; For PIO transfers
136%include "HIRQ.asm"             ; For IRQ handling
137%include "HStatus.asm"          ; For reading hard disk status
138%include "HDrvSel.asm"          ; For selecting drive to access
139%include "HCommand.asm"         ; For outputting command and parameters
140
141; Include .asm files (Interrupt handlers)
142%include "Int13h.asm"           ; For Int 13h, Disk functions
143%ifndef USE_AT
144    %include "Int19hLate.asm"   ; For late initialization
145%endif
146%include "Int19hMenu.asm"       ; For Int 19h, Boot Loader for Boot Menu
147
148; Include .asm files (Hard Disk BIOS functions)
149%include "AH0h_HReset.asm"      ; Required by Int13h_Jump.asm
150%include "AH1h_HStatus.asm"     ; Required by Int13h_Jump.asm
151%include "AH2h_HRead.asm"       ; Required by Int13h_Jump.asm
152%include "AH3h_HWrite.asm"      ; Required by Int13h_Jump.asm
153%include "AH4h_HVerify.asm"     ; Required by Int13h_Jump.asm
154%include "AH8h_HParams.asm"     ; Required by Int13h_Jump.asm
155%include "AH9h_HInit.asm"       ; Required by Int13h_Jump.asm
156%include "AHCh_HSeek.asm"       ; Required by Int13h_Jump.asm
157%include "AHDh_HReset.asm"      ; Required by Int13h_Jump.asm
158%include "AH10h_HReady.asm"     ; Required by Int13h_Jump.asm
159%include "AH11h_HRecal.asm"     ; Required by Int13h_Jump.asm
160%include "AH15h_HSize.asm"      ; Required by Int13h_Jump.asm
161%include "AH23h_HFeatures.asm"  ; Required by Int13h_Jump.asm
162%include "AH24h_HSetBlocks.asm" ; Required by Int13h_Jump.asm
163%include "AH25h_HDrvID.asm"     ; Required by Int13h_Jump.asm
164
165
166
167; Fill with zeroes until size is what we want
168;times (CNT_ROM_BLOCKS*512)-($-$$) db 0
Note: See TracBrowser for help on using the repository browser.