| [3] | 1 | ; Project name : IDE BIOS
|
|---|
| 2 | ; Description : Functions for detecting drive for the BIOS.
|
|---|
| 3 |
|
|---|
| 4 | ; Section containing code
|
|---|
| 5 | SECTION .text
|
|---|
| 6 |
|
|---|
| 7 | ;--------------------------------------------------------------------
|
|---|
| 8 | ; Detects all IDE hard disks to be controlled by this BIOS.
|
|---|
| 9 | ;
|
|---|
| 10 | ; DetectDrives_FromAllIDEControllers
|
|---|
| 11 | ; Parameters:
|
|---|
| 12 | ; DS: RAMVARS segment
|
|---|
| 13 | ; ES: BDA segment (zero)
|
|---|
| 14 | ; Returns:
|
|---|
| 15 | ; Nothing
|
|---|
| 16 | ; Corrupts registers:
|
|---|
| 17 | ; All (not segments)
|
|---|
| 18 | ;--------------------------------------------------------------------
|
|---|
| 19 | DetectDrives_FromAllIDEControllers:
|
|---|
| [33] | 20 | call RamVars_GetIdeControllerCountToCX
|
|---|
| [3] | 21 | mov bp, ROMVARS.ideVars0 ; CS:BP now points to first IDEVARS
|
|---|
| 22 | .DriveDetectLoop:
|
|---|
| 23 | call DetectDrives_WithIDEVARS ; Detect Master and Slave
|
|---|
| 24 | add bp, BYTE IDEVARS_size ; Point to next IDEVARS
|
|---|
| 25 | loop .DriveDetectLoop
|
|---|
| 26 | ret
|
|---|
| 27 |
|
|---|
| 28 |
|
|---|
| 29 | ;--------------------------------------------------------------------
|
|---|
| 30 | ; Detects IDE hard disks by using information from IDEVARS.
|
|---|
| 31 | ;
|
|---|
| 32 | ; DetectDrives_WithIDEVARS
|
|---|
| 33 | ; Parameters:
|
|---|
| 34 | ; CS:BP: Ptr to IDEVARS
|
|---|
| 35 | ; DS: RAMVARS segment
|
|---|
| 36 | ; ES: Zero (BDA segment)
|
|---|
| 37 | ; Returns:
|
|---|
| 38 | ; Nothing
|
|---|
| 39 | ; Corrupts registers:
|
|---|
| 40 | ; AX, BX, DX, SI, DI
|
|---|
| 41 | ;--------------------------------------------------------------------
|
|---|
| 42 | DetectDrives_WithIDEVARS:
|
|---|
| 43 | push cx
|
|---|
| [97] | 44 | mov ax, g_szMaster
|
|---|
| [98] | 45 | mov bh, MASK_IDE_DRVHD_SET ; Select Master drive
|
|---|
| 46 | call StartDetectionWithDriveSelectByteInBHandStringInAX ; Detect and create DPT + BOOTNFO
|
|---|
| [3] | 47 |
|
|---|
| [97] | 48 | mov ax, g_szSlave
|
|---|
| [98] | 49 | mov bh, MASK_IDE_DRVHD_SET | FLG_IDE_DRVHD_DRV
|
|---|
| 50 | call StartDetectionWithDriveSelectByteInBHandStringInAX
|
|---|
| [3] | 51 | pop cx
|
|---|
| 52 | ret
|
|---|
| 53 |
|
|---|
| 54 |
|
|---|
| 55 | ;--------------------------------------------------------------------
|
|---|
| [98] | 56 | ; StartDetectionWithDriveSelectByteInBHandStringInAX
|
|---|
| [3] | 57 | ; Parameters:
|
|---|
| [98] | 58 | ; AX: Offset to "Master" or "Slave" string
|
|---|
| [3] | 59 | ; BH: Drive Select byte for Drive and Head Register
|
|---|
| 60 | ; CS:BP: Ptr to IDEVARS for the drive
|
|---|
| 61 | ; DS: RAMVARS segment
|
|---|
| 62 | ; ES: Zero (BDA segment)
|
|---|
| 63 | ; Returns:
|
|---|
| [98] | 64 | ; Nothing
|
|---|
| [3] | 65 | ; Corrupts registers:
|
|---|
| [98] | 66 | ; AX, BX, CX, DX, SI, DI
|
|---|
| [3] | 67 | ;--------------------------------------------------------------------
|
|---|
| [98] | 68 | StartDetectionWithDriveSelectByteInBHandStringInAX:
|
|---|
| 69 | call DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP
|
|---|
| [120] | 70 | ; Fall to .ReadAtaInfoFromHardDisk
|
|---|
| [3] | 71 |
|
|---|
| 72 | ;--------------------------------------------------------------------
|
|---|
| [120] | 73 | ; .ReadAtaInfoFromHardDisk
|
|---|
| [3] | 74 | ; Parameters:
|
|---|
| 75 | ; BH: Drive Select byte for Drive and Head Register
|
|---|
| 76 | ; CS:BP: Ptr to IDEVARS for the drive
|
|---|
| 77 | ; DS: RAMVARS segment
|
|---|
| 78 | ; ES: Zero (BDA segment)
|
|---|
| 79 | ; Returns:
|
|---|
| 80 | ; ES:SI Ptr to ATA information (read with IDENTIFY DEVICE command)
|
|---|
| 81 | ; CF: Cleared if ATA-information read successfully
|
|---|
| 82 | ; Set if any error
|
|---|
| 83 | ; Corrupts registers:
|
|---|
| 84 | ; AX, BL, CX, DX, DI
|
|---|
| 85 | ;--------------------------------------------------------------------
|
|---|
| [120] | 86 | .ReadAtaInfoFromHardDisk:
|
|---|
| [3] | 87 | mov bl, [cs:bp+IDEVARS.bBusType]; Load BUS type
|
|---|
| 88 | mov dx, [cs:bp+IDEVARS.wPort] ; Load IDE Base Port address
|
|---|
| 89 | mov di, BOOTVARS.rgbAtaInfo ; ES:DI now points to ATA info location
|
|---|
| 90 | call AH25h_GetDriveInfo
|
|---|
| [120] | 91 | jnc SHORT CreateBiosTablesForHardDisk
|
|---|
| 92 | ; Fall to .ReadAtapiInfoFromDrive
|
|---|
| [3] | 93 |
|
|---|
| [120] | 94 | .ReadAtapiInfoFromDrive: ; Not yet implemented
|
|---|
| 95 | ;call ReadAtapiInfoFromDrive ; Assume CD-ROM
|
|---|
| 96 | ;jnc SHORT _CreateBiosTablesForCDROM
|
|---|
| 97 | jmp DetectPrint_DriveNotFound
|
|---|
| [3] | 98 |
|
|---|
| [120] | 99 |
|
|---|
| [3] | 100 | ;--------------------------------------------------------------------
|
|---|
| [98] | 101 | ; CreateBiosTablesForHardDisk
|
|---|
| [3] | 102 | ; Parameters:
|
|---|
| 103 | ; BH: Drive Select byte for Drive and Head Register
|
|---|
| 104 | ; CS:BP: Ptr to IDEVARS for the drive
|
|---|
| [120] | 105 | ; ES:DI Ptr to ATA information for the drive
|
|---|
| [3] | 106 | ; DS: RAMVARS segment
|
|---|
| [98] | 107 | ; ES: BDA/Bootnfo segment
|
|---|
| [3] | 108 | ; Returns:
|
|---|
| [98] | 109 | ; Nothing
|
|---|
| [3] | 110 | ; Corrupts registers:
|
|---|
| [98] | 111 | ; AX, BX, CX, DX, SI, DI
|
|---|
| [3] | 112 | ;--------------------------------------------------------------------
|
|---|
| [98] | 113 | CreateBiosTablesForHardDisk:
|
|---|
| [120] | 114 | mov si, di ; ES:SI now points to ATA information
|
|---|
| [3] | 115 | call CreateDPT_FromAtaInformation
|
|---|
| 116 | jc SHORT .InvalidAtaInfo
|
|---|
| 117 | call BootInfo_CreateForHardDisk
|
|---|
| [98] | 118 | jmp DetectPrint_DriveNameFromBootnfoInESBX
|
|---|
| [3] | 119 | .InvalidAtaInfo:
|
|---|
| [98] | 120 | jmp DetectPrint_DriveNotFound
|
|---|
