| 1 | ; Project name : IDE BIOS |
|---|
| 2 | ; Description : Functions for detecting drive for the BIOS. |
|---|
| 3 | |
|---|
| 4 | ; Section containing code |
|---|
| 5 | SECTION .text |
|---|
| 6 | |
|---|
| 7 | ;-------------------------------------------------------------------- |
|---|
| 8 | ; Detects all IDE hard disks to be controlled by this BIOS. |
|---|
| 9 | ; |
|---|
| 10 | ; DetectDrives_FromAllIDEControllers |
|---|
| 11 | ; Parameters: |
|---|
| 12 | ; DS: RAMVARS segment |
|---|
| 13 | ; ES: BDA segment (zero) |
|---|
| 14 | ; Returns: |
|---|
| 15 | ; Nothing |
|---|
| 16 | ; Corrupts registers: |
|---|
| 17 | ; All (not segments) |
|---|
| 18 | ;-------------------------------------------------------------------- |
|---|
| 19 | DetectDrives_FromAllIDEControllers: |
|---|
| 20 | call RamVars_GetIdeControllerCountToCX |
|---|
| 21 | mov bp, ROMVARS.ideVars0 ; CS:BP now points to first IDEVARS |
|---|
| 22 | .DriveDetectLoop: |
|---|
| 23 | call DetectDrives_WithIDEVARS ; Detect Master and Slave |
|---|
| 24 | add bp, BYTE IDEVARS_size ; Point to next IDEVARS |
|---|
| 25 | loop .DriveDetectLoop |
|---|
| 26 | ret |
|---|
| 27 | |
|---|
| 28 | |
|---|
| 29 | ;-------------------------------------------------------------------- |
|---|
| 30 | ; Detects IDE hard disks by using information from IDEVARS. |
|---|
| 31 | ; |
|---|
| 32 | ; DetectDrives_WithIDEVARS |
|---|
| 33 | ; Parameters: |
|---|
| 34 | ; CS:BP: Ptr to IDEVARS |
|---|
| 35 | ; DS: RAMVARS segment |
|---|
| 36 | ; ES: Zero (BDA segment) |
|---|
| 37 | ; Returns: |
|---|
| 38 | ; Nothing |
|---|
| 39 | ; Corrupts registers: |
|---|
| 40 | ; AX, BX, DX, SI, DI |
|---|
| 41 | ;-------------------------------------------------------------------- |
|---|
| 42 | DetectDrives_WithIDEVARS: |
|---|
| 43 | push cx |
|---|
| 44 | mov ax, g_szMaster |
|---|
| 45 | mov bh, MASK_IDE_DRVHD_SET ; Select Master drive |
|---|
| 46 | call StartDetectionWithDriveSelectByteInBHandStringInAX ; Detect and create DPT + BOOTNFO |
|---|
| 47 | |
|---|
| 48 | mov ax, g_szSlave |
|---|
| 49 | mov bh, MASK_IDE_DRVHD_SET | FLG_IDE_DRVHD_DRV |
|---|
| 50 | call StartDetectionWithDriveSelectByteInBHandStringInAX |
|---|
| 51 | pop cx |
|---|
| 52 | ret |
|---|
| 53 | |
|---|
| 54 | |
|---|
| 55 | ;-------------------------------------------------------------------- |
|---|
| 56 | ; StartDetectionWithDriveSelectByteInBHandStringInAX |
|---|
| 57 | ; Parameters: |
|---|
| 58 | ; AX: Offset to "Master" or "Slave" string |
|---|
| 59 | ; BH: Drive Select byte for Drive and Head Register |
|---|
| 60 | ; CS:BP: Ptr to IDEVARS for the drive |
|---|
| 61 | ; DS: RAMVARS segment |
|---|
| 62 | ; ES: Zero (BDA segment) |
|---|
| 63 | ; Returns: |
|---|
| 64 | ; Nothing |
|---|
| 65 | ; Corrupts registers: |
|---|
| 66 | ; AX, BX, CX, DX, SI, DI |
|---|
| 67 | ;-------------------------------------------------------------------- |
|---|
| 68 | StartDetectionWithDriveSelectByteInBHandStringInAX: |
|---|
| 69 | call DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP |
|---|
| 70 | call ReadAtaInfoFromDrive ; Assume hard disk |
|---|
| 71 | jnc SHORT CreateBiosTablesForHardDisk |
|---|
| 72 | ;call ReadAtapiInfoFromDrive ; Assume CD-ROM (not yet implemented) |
|---|
| 73 | ;jnc SHORT _CreateBiosTablesForCDROM |
|---|
| 74 | jmp DetectPrint_DriveNotFound |
|---|
| 75 | |
|---|
| 76 | |
|---|
| 77 | ;-------------------------------------------------------------------- |
|---|
| 78 | ; ReadAtaInfoFromDrive |
|---|
| 79 | ; Parameters: |
|---|
| 80 | ; BH: Drive Select byte for Drive and Head Register |
|---|
| 81 | ; CS:BP: Ptr to IDEVARS for the drive |
|---|
| 82 | ; DS: RAMVARS segment |
|---|
| 83 | ; ES: Zero (BDA segment) |
|---|
| 84 | ; Returns: |
|---|
| 85 | ; ES:SI Ptr to ATA information (read with IDENTIFY DEVICE command) |
|---|
| 86 | ; CF: Cleared if ATA-information read successfully |
|---|
| 87 | ; Set if any error |
|---|
| 88 | ; Corrupts registers: |
|---|
| 89 | ; AX, BL, CX, DX, DI |
|---|
| 90 | ;-------------------------------------------------------------------- |
|---|
| 91 | ReadAtaInfoFromDrive: |
|---|
| 92 | mov bl, [cs:bp+IDEVARS.bBusType]; Load BUS type |
|---|
| 93 | mov dx, [cs:bp+IDEVARS.wPort] ; Load IDE Base Port address |
|---|
| 94 | mov di, BOOTVARS.rgbAtaInfo ; ES:DI now points to ATA info location |
|---|
| 95 | call AH25h_GetDriveInfo |
|---|
| 96 | mov si, di ; ES:SI now points to ATA information |
|---|
| 97 | ret |
|---|
| 98 | |
|---|
| 99 | |
|---|
| 100 | ;-------------------------------------------------------------------- |
|---|
| 101 | ; CreateBiosTablesForHardDisk |
|---|
| 102 | ; Parameters: |
|---|
| 103 | ; BH: Drive Select byte for Drive and Head Register |
|---|
| 104 | ; CS:BP: Ptr to IDEVARS for the drive |
|---|
| 105 | ; ES:SI Ptr to ATA information for the drive |
|---|
| 106 | ; DS: RAMVARS segment |
|---|
| 107 | ; ES: BDA/Bootnfo segment |
|---|
| 108 | ; Returns: |
|---|
| 109 | ; Nothing |
|---|
| 110 | ; Corrupts registers: |
|---|
| 111 | ; AX, BX, CX, DX, SI, DI |
|---|
| 112 | ;-------------------------------------------------------------------- |
|---|
| 113 | CreateBiosTablesForHardDisk: |
|---|
| 114 | call CreateDPT_FromAtaInformation |
|---|
| 115 | jc SHORT .InvalidAtaInfo |
|---|
| 116 | call BootInfo_CreateForHardDisk |
|---|
| 117 | jmp DetectPrint_DriveNameFromBootnfoInESBX |
|---|
| 118 | .InvalidAtaInfo: |
|---|
| 119 | jmp DetectPrint_DriveNotFound |
|---|
