1 | ; Project name : XTIDE Universal BIOS |
---|
2 | ; Description : Int 13h function AH=9h, Initialize Drive Parameters. |
---|
3 | |
---|
4 | ; Section containing code |
---|
5 | SECTION .text |
---|
6 | |
---|
7 | ;-------------------------------------------------------------------- |
---|
8 | ; Int 13h function AH=9h, Initialize Drive Parameters. |
---|
9 | ; |
---|
10 | ; AH9h_HandlerForInitializeDriveParameters |
---|
11 | ; Parameters: |
---|
12 | ; DL: Translated Drive number |
---|
13 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
14 | ; SS:BP: Ptr to IDEPACK |
---|
15 | ; Returns with INTPACK: |
---|
16 | ; AH: Int 13h return status |
---|
17 | ; CF: 0 if succesfull, 1 if error |
---|
18 | ;-------------------------------------------------------------------- |
---|
19 | AH9h_HandlerForInitializeDriveParameters: |
---|
20 | %ifndef USE_186 |
---|
21 | call AH9h_InitializeDriveForUse |
---|
22 | jmp Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH |
---|
23 | %else |
---|
24 | push Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH |
---|
25 | ; Fall to AH9h_InitializeDriveForUse |
---|
26 | %endif |
---|
27 | |
---|
28 | |
---|
29 | ;-------------------------------------------------------------------- |
---|
30 | ; Initialized drive to be ready for use. |
---|
31 | ; |
---|
32 | ; AH9h_InitializeDriveForUse |
---|
33 | ; Parameters: |
---|
34 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
35 | ; SS:BP: Ptr to IDEPACK |
---|
36 | ; Returns: |
---|
37 | ; AH: Int 13h return status |
---|
38 | ; CF: 0 if succesfull, 1 if error |
---|
39 | ; Corrupts registers: |
---|
40 | ; AL, BX, DX |
---|
41 | ;-------------------------------------------------------------------- |
---|
42 | AH9h_InitializeDriveForUse: |
---|
43 | push si |
---|
44 | push cx |
---|
45 | |
---|
46 | %ifdef MODULE_SERIAL |
---|
47 | ; |
---|
48 | ; no need to do this for serial deveices, and we use the DPT_RESET flag bits |
---|
49 | ; to store the drive type for serial floppy drives (MODULE_SERIAL_FLOPPY) |
---|
50 | ; |
---|
51 | xor ah, ah |
---|
52 | test byte [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE ; Clears CF |
---|
53 | jnz .ReturnNotSuccessfull |
---|
54 | %endif |
---|
55 | |
---|
56 | ; Try to select drive and wait until ready |
---|
57 | or BYTE [di+DPT.bFlagsHigh], MASKH_DPT_RESET ; Everything uninitialized |
---|
58 | call AccessDPT_GetDriveSelectByteToAL |
---|
59 | mov [bp+IDEPACK.bDrvAndHead], al |
---|
60 | call Device_SelectDrive |
---|
61 | jc SHORT .ReturnNotSuccessfull |
---|
62 | and BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nDRDY ; Clear since success |
---|
63 | |
---|
64 | ; Initialize CHS parameters if LBA is not used |
---|
65 | call InitializeDeviceParameters |
---|
66 | jc SHORT .SetWriteCache |
---|
67 | and BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nINITPRMS |
---|
68 | |
---|
69 | ; Enable or Disable Write Cache |
---|
70 | .SetWriteCache: |
---|
71 | call SetWriteCache |
---|
72 | |
---|
73 | ; Recalibrate drive by seeking to cylinder 0 |
---|
74 | .RecalibrateDrive: |
---|
75 | call AH11h_RecalibrateDrive |
---|
76 | jc SHORT .InitializeBlockMode |
---|
77 | and BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nRECALIBRATE |
---|
78 | |
---|
79 | ; Initialize block mode transfers |
---|
80 | .InitializeBlockMode: |
---|
81 | call InitializeBlockMode |
---|
82 | jc SHORT .ReturnNotSuccessfull |
---|
83 | and BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nSETBLOCK ; Keeps CF clear |
---|
84 | |
---|
85 | .ReturnNotSuccessfull: |
---|
86 | pop cx |
---|
87 | pop si |
---|
88 | ret |
---|
89 | |
---|
90 | |
---|
91 | ;-------------------------------------------------------------------- |
---|
92 | ; InitializeDeviceParameters |
---|
93 | ; Parameters: |
---|
94 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
95 | ; SS:BP: Ptr to IDEPACK |
---|
96 | ; Returns: |
---|
97 | ; AH: BIOS Error code |
---|
98 | ; CF: Cleared if succesfull |
---|
99 | ; Set if any error |
---|
100 | ; Corrupts registers: |
---|
101 | ; AL, BX, CX, DX |
---|
102 | ;-------------------------------------------------------------------- |
---|
103 | InitializeDeviceParameters: |
---|
104 | ; No need to initialize CHS parameters if LBA mode enabled |
---|
105 | test BYTE [di+DPT.bFlagsLow], FLG_DRVNHEAD_LBA ; Clear CF |
---|
106 | jnz SHORT ReturnSuccessSinceInitializationNotNeeded |
---|
107 | |
---|
108 | ; Initialize Logical Sectors per Track and Max Head number |
---|
109 | mov ah, [di+DPT.bPchsHeads] |
---|
110 | dec ah ; Max Head number |
---|
111 | mov dl, [di+DPT.bPchsSectors] ; Sectors per Track |
---|
112 | mov al, COMMAND_INITIALIZE_DEVICE_PARAMETERS |
---|
113 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY) |
---|
114 | jmp Idepack_StoreNonExtParametersAndIssueCommandFromAL |
---|
115 | |
---|
116 | |
---|
117 | ;-------------------------------------------------------------------- |
---|
118 | ; SetWriteCache |
---|
119 | ; Parameters: |
---|
120 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
121 | ; Returns: |
---|
122 | ; AH: BIOS Error code |
---|
123 | ; CF: Cleared if succesfull |
---|
124 | ; Set if any error |
---|
125 | ; Corrupts registers: |
---|
126 | ; AL, BX, CX, DX, SI |
---|
127 | ;-------------------------------------------------------------------- |
---|
128 | SetWriteCache: |
---|
129 | call AccessDPT_GetPointerToDRVPARAMStoCSBX |
---|
130 | mov bl, [cs:bx+DRVPARAMS.wFlags] |
---|
131 | and bx, BYTE MASK_DRVPARAMS_WRITECACHE |
---|
132 | jz SHORT ReturnSuccessSinceInitializationNotNeeded ; DEFAULT_WRITE_CACHE |
---|
133 | mov si, [cs:bx+.rgbWriteCacheCommands] |
---|
134 | jmp AH23h_SetControllerFeatures |
---|
135 | |
---|
136 | .rgbWriteCacheCommands: |
---|
137 | db 0 ; DEFAULT_WRITE_CACHE |
---|
138 | db FEATURE_DISABLE_WRITE_CACHE ; DISABLE_WRITE_CACHE |
---|
139 | db FEATURE_ENABLE_WRITE_CACHE ; ENABLE_WRITE_CACHE |
---|
140 | |
---|
141 | |
---|
142 | ;-------------------------------------------------------------------- |
---|
143 | ; InitializeBlockMode |
---|
144 | ; Parameters: |
---|
145 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
146 | ; Returns: |
---|
147 | ; AH: BIOS Error code |
---|
148 | ; CF: Cleared if succesfull |
---|
149 | ; Set if any error |
---|
150 | ; Corrupts registers: |
---|
151 | ; AL, BX, CX, DX |
---|
152 | ;-------------------------------------------------------------------- |
---|
153 | InitializeBlockMode: |
---|
154 | test BYTE [di+DPT.bFlagsHigh], FLGH_DPT_BLOCK_MODE_SUPPORTED ; Clear CF |
---|
155 | jz SHORT ReturnSuccessSinceInitializationNotNeeded |
---|
156 | |
---|
157 | call AccessDPT_GetPointerToDRVPARAMStoCSBX |
---|
158 | mov al, 1 ; Disable block mode |
---|
159 | test BYTE [cs:bx+DRVPARAMS.wFlags], FLG_DRVPARAMS_BLOCKMODE |
---|
160 | eCMOVNZ al, [di+DPT_ATA.bMaxBlock] ; Load max block size |
---|
161 | jmp AH24h_SetBlockSize |
---|
162 | ReturnSuccessSinceInitializationNotNeeded: |
---|
163 | xor ah, ah |
---|
164 | ret |
---|