source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH9h_HInit.asm @ 276

; Project name  :   XTIDE Universal BIOS
; Description   :   Int 13h function AH=9h, Initialize Drive Parameters.

; Section containing code
SECTION .text

;--------------------------------------------------------------------
; Int 13h function AH=9h, Initialize Drive Parameters.
;
; AH9h_HandlerForInitializeDriveParameters
;   Parameters:
;       DL:     Translated Drive number
;       DS:DI:  Ptr to DPT (in RAMVARS segment)
;       SS:BP:  Ptr to IDEPACK
;   Returns with INTPACK:
;       AH:     Int 13h return status
;       CF:     0 if succesfull, 1 if error
;--------------------------------------------------------------------
AH9h_HandlerForInitializeDriveParameters:
%ifndef USE_186
    call    AH9h_InitializeDriveForUse
    jmp     Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
%else
    push    Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
    ; Fall to AH9h_InitializeDriveForUse
%endif


;--------------------------------------------------------------------
; Initialized drive to be ready for use.
;
; AH9h_InitializeDriveForUse
;   Parameters:
;       DS:DI:  Ptr to DPT (in RAMVARS segment)
;       SS:BP:  Ptr to IDEPACK
;   Returns:
;       AH:     Int 13h return status
;       CF:     0 if succesfull, 1 if error
;   Corrupts registers:
;       AL, BX, DX
;--------------------------------------------------------------------
AH9h_InitializeDriveForUse:
    push    si
    push    cx

%ifdef MODULE_SERIAL
    ; 
    ; no need to do this for serial deveices, and we use the DPT_RESET flag bits
    ; to store the drive type for serial floppy drives (MODULE_SERIAL_FLOPPY)
    ;
    xor     ah, ah
    test    byte [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE    ; Clears CF
    jnz     .ReturnNotSuccessfull
%endif
        
    ; Try to select drive and wait until ready
    or      BYTE [di+DPT.bFlagsHigh], MASKH_DPT_RESET       ; Everything uninitialized
    call    AccessDPT_GetDriveSelectByteToAL
    mov     [bp+IDEPACK.bDrvAndHead], al
    call    Device_SelectDrive
    jc      SHORT .ReturnNotSuccessfull
    and     BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nDRDY ; Clear since success

    ; Initialize CHS parameters if LBA is not used
    call    InitializeDeviceParameters
    jc      SHORT .SetWriteCache
    and     BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nINITPRMS

    ; Enable or Disable Write Cache
.SetWriteCache:
    ;call   SetWriteCache

    ; Recalibrate drive by seeking to cylinder 0
.RecalibrateDrive:
    call    AH11h_RecalibrateDrive
    jc      SHORT .InitializeBlockMode
    and     BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nRECALIBRATE

    ; Initialize block mode transfers
.InitializeBlockMode:
    call    InitializeBlockMode
    jc      SHORT .ReturnNotSuccessfull
    and     BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nSETBLOCK ; Keeps CF clear

.ReturnNotSuccessfull:
    pop     cx
    pop     si
    ret


;--------------------------------------------------------------------
; InitializeDeviceParameters
;   Parameters:
;       DS:DI:  Ptr to DPT (in RAMVARS segment)
;       SS:BP:  Ptr to IDEPACK
;   Returns:
;       AH:     BIOS Error code
;       CF:     Cleared if succesfull
;               Set if any error
;   Corrupts registers:
;       AL, BX, CX, DX
;--------------------------------------------------------------------
InitializeDeviceParameters:
    ; No need to initialize CHS parameters if LBA mode enabled
    test    BYTE [di+DPT.bFlagsLow], FLG_DRVNHEAD_LBA   ; Clear CF
    jnz     SHORT ReturnSuccessSinceInitializationNotNeeded

    ; Initialize Logical Sectors per Track and Max Head number
    mov     ah, [di+DPT.bPchsHeads]
    dec     ah                          ; Max Head number
    mov     dl, [di+DPT.bPchsSectors]   ; Sectors per Track
    mov     al, COMMAND_INITIALIZE_DEVICE_PARAMETERS
    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY)
    jmp     Idepack_StoreNonExtParametersAndIssueCommandFromAL


;--------------------------------------------------------------------
; SetWriteCache
;   Parameters:
;       DS:DI:  Ptr to DPT (in RAMVARS segment)
;   Returns:
;       AH:     BIOS Error code
;       CF:     Cleared if succesfull
;               Set if any error
;   Corrupts registers:
;       AL, BX, CX, DX, SI
;--------------------------------------------------------------------
SetWriteCache:
    call    AccessDPT_GetPointerToDRVPARAMStoCSBX
    mov     bl, [cs:bx+DRVPARAMS.wFlags]
    and     bx, BYTE MASK_DRVPARAMS_WRITECACHE
    jz      SHORT ReturnSuccessSinceInitializationNotNeeded     ; DEFAULT_WRITE_CACHE
    mov     si, [cs:bx+.rgbWriteCacheCommands]
    jmp     AH23h_SetControllerFeatures

.rgbWriteCacheCommands:
    db      0                               ; DEFAULT_WRITE_CACHE
    db      FEATURE_DISABLE_WRITE_CACHE     ; DISABLE_WRITE_CACHE
    db      FEATURE_ENABLE_WRITE_CACHE      ; ENABLE_WRITE_CACHE


;--------------------------------------------------------------------
; InitializeBlockMode
;   Parameters:
;       DS:DI:  Ptr to DPT (in RAMVARS segment)
;   Returns:
;       AH:     BIOS Error code
;       CF:     Cleared if succesfull
;               Set if any error
;   Corrupts registers:
;       AL, BX, CX, DX
;--------------------------------------------------------------------
InitializeBlockMode:
    test    BYTE [di+DPT.bFlagsHigh], FLGH_DPT_BLOCK_MODE_SUPPORTED ; Clear CF
    jz      SHORT ReturnSuccessSinceInitializationNotNeeded

    call    AccessDPT_GetPointerToDRVPARAMStoCSBX
    mov     al, 1                       ; Disable block mode
    test    BYTE [cs:bx+DRVPARAMS.wFlags], FLG_DRVPARAMS_BLOCKMODE
    eCMOVNZ al, [di+DPT_ATA.bMaxBlock]  ; Load max block size
    jmp     AH24h_SetBlockSize
ReturnSuccessSinceInitializationNotNeeded:
    xor     ah, ah
    ret