[148] | 1 | ; Project name : XTIDE Universal BIOS |
---|
[3] | 2 | ; Description : Int 13h function AH=9h, Initialize Drive Parameters. |
---|
| 3 | |
---|
| 4 | ; Section containing code |
---|
| 5 | SECTION .text |
---|
| 6 | |
---|
| 7 | ;-------------------------------------------------------------------- |
---|
| 8 | ; Int 13h function AH=9h, Initialize Drive Parameters. |
---|
| 9 | ; |
---|
| 10 | ; AH9h_HandlerForInitializeDriveParameters |
---|
| 11 | ; Parameters: |
---|
[148] | 12 | ; DL: Translated Drive number |
---|
| 13 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
[150] | 14 | ; SS:BP: Ptr to IDEPACK |
---|
| 15 | ; Returns with INTPACK: |
---|
[3] | 16 | ; AH: Int 13h return status |
---|
| 17 | ; CF: 0 if succesfull, 1 if error |
---|
| 18 | ;-------------------------------------------------------------------- |
---|
| 19 | AH9h_HandlerForInitializeDriveParameters: |
---|
[84] | 20 | %ifndef USE_186 |
---|
[3] | 21 | call AH9h_InitializeDriveForUse |
---|
[148] | 22 | jmp Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH |
---|
[84] | 23 | %else |
---|
[148] | 24 | push Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH |
---|
[162] | 25 | ; Fall to AH9h_InitializeDriveForUse |
---|
[84] | 26 | %endif |
---|
[3] | 27 | |
---|
| 28 | |
---|
| 29 | ;-------------------------------------------------------------------- |
---|
| 30 | ; Initialized drive to be ready for use. |
---|
| 31 | ; |
---|
| 32 | ; AH9h_InitializeDriveForUse |
---|
| 33 | ; Parameters: |
---|
[148] | 34 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
[150] | 35 | ; SS:BP: Ptr to IDEPACK |
---|
[3] | 36 | ; Returns: |
---|
| 37 | ; AH: Int 13h return status |
---|
| 38 | ; CF: 0 if succesfull, 1 if error |
---|
| 39 | ; Corrupts registers: |
---|
[148] | 40 | ; AL, BX, DX |
---|
[3] | 41 | ;-------------------------------------------------------------------- |
---|
| 42 | AH9h_InitializeDriveForUse: |
---|
[276] | 43 | push si |
---|
[3] | 44 | push cx |
---|
| 45 | |
---|
[258] | 46 | %ifdef MODULE_SERIAL |
---|
| 47 | ; |
---|
| 48 | ; no need to do this for serial deveices, and we use the DPT_RESET flag bits |
---|
| 49 | ; to store the drive type for serial floppy drives (MODULE_SERIAL_FLOPPY) |
---|
| 50 | ; |
---|
| 51 | xor ah, ah |
---|
| 52 | test byte [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE ; Clears CF |
---|
| 53 | jnz .ReturnNotSuccessfull |
---|
| 54 | %endif |
---|
| 55 | |
---|
[3] | 56 | ; Try to select drive and wait until ready |
---|
[158] | 57 | or BYTE [di+DPT.bFlagsHigh], MASKH_DPT_RESET ; Everything uninitialized |
---|
[150] | 58 | call AccessDPT_GetDriveSelectByteToAL |
---|
| 59 | mov [bp+IDEPACK.bDrvAndHead], al |
---|
| 60 | call Device_SelectDrive |
---|
[3] | 61 | jc SHORT .ReturnNotSuccessfull |
---|
[158] | 62 | and BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nDRDY ; Clear since success |
---|
[3] | 63 | |
---|
| 64 | ; Initialize CHS parameters if LBA is not used |
---|
[150] | 65 | call InitializeDeviceParameters |
---|
[276] | 66 | jc SHORT .SetWriteCache |
---|
[158] | 67 | and BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nINITPRMS |
---|
[3] | 68 | |
---|
[276] | 69 | ; Enable or Disable Write Cache |
---|
| 70 | .SetWriteCache: |
---|
[279] | 71 | call SetWriteCache |
---|
[276] | 72 | |
---|
[3] | 73 | ; Recalibrate drive by seeking to cylinder 0 |
---|
| 74 | .RecalibrateDrive: |
---|
| 75 | call AH11h_RecalibrateDrive |
---|
| 76 | jc SHORT .InitializeBlockMode |
---|
[158] | 77 | and BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nRECALIBRATE |
---|
[3] | 78 | |
---|
| 79 | ; Initialize block mode transfers |
---|
| 80 | .InitializeBlockMode: |
---|
[150] | 81 | call InitializeBlockMode |
---|
[3] | 82 | jc SHORT .ReturnNotSuccessfull |
---|
[158] | 83 | and BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nSETBLOCK ; Keeps CF clear |
---|
[3] | 84 | |
---|
| 85 | .ReturnNotSuccessfull: |
---|
| 86 | pop cx |
---|
[276] | 87 | pop si |
---|
[3] | 88 | ret |
---|
| 89 | |
---|
| 90 | |
---|
| 91 | ;-------------------------------------------------------------------- |
---|
[150] | 92 | ; InitializeDeviceParameters |
---|
[3] | 93 | ; Parameters: |
---|
[150] | 94 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
| 95 | ; SS:BP: Ptr to IDEPACK |
---|
[3] | 96 | ; Returns: |
---|
| 97 | ; AH: BIOS Error code |
---|
| 98 | ; CF: Cleared if succesfull |
---|
| 99 | ; Set if any error |
---|
| 100 | ; Corrupts registers: |
---|
[150] | 101 | ; AL, BX, CX, DX |
---|
[3] | 102 | ;-------------------------------------------------------------------- |
---|
[150] | 103 | InitializeDeviceParameters: |
---|
[3] | 104 | ; No need to initialize CHS parameters if LBA mode enabled |
---|
[158] | 105 | test BYTE [di+DPT.bFlagsLow], FLG_DRVNHEAD_LBA ; Clear CF |
---|
[150] | 106 | jnz SHORT ReturnSuccessSinceInitializationNotNeeded |
---|
[3] | 107 | |
---|
[157] | 108 | ; Initialize Logical Sectors per Track and Max Head number |
---|
[227] | 109 | mov ah, [di+DPT.bPchsHeads] |
---|
[150] | 110 | dec ah ; Max Head number |
---|
[227] | 111 | mov dl, [di+DPT.bPchsSectors] ; Sectors per Track |
---|
[150] | 112 | mov al, COMMAND_INITIALIZE_DEVICE_PARAMETERS |
---|
| 113 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY) |
---|
| 114 | jmp Idepack_StoreNonExtParametersAndIssueCommandFromAL |
---|
[3] | 115 | |
---|
| 116 | |
---|
| 117 | ;-------------------------------------------------------------------- |
---|
[276] | 118 | ; SetWriteCache |
---|
| 119 | ; Parameters: |
---|
| 120 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
| 121 | ; Returns: |
---|
| 122 | ; AH: BIOS Error code |
---|
| 123 | ; CF: Cleared if succesfull |
---|
| 124 | ; Set if any error |
---|
| 125 | ; Corrupts registers: |
---|
| 126 | ; AL, BX, CX, DX, SI |
---|
| 127 | ;-------------------------------------------------------------------- |
---|
| 128 | SetWriteCache: |
---|
| 129 | call AccessDPT_GetPointerToDRVPARAMStoCSBX |
---|
| 130 | mov bl, [cs:bx+DRVPARAMS.wFlags] |
---|
| 131 | and bx, BYTE MASK_DRVPARAMS_WRITECACHE |
---|
| 132 | jz SHORT ReturnSuccessSinceInitializationNotNeeded ; DEFAULT_WRITE_CACHE |
---|
| 133 | mov si, [cs:bx+.rgbWriteCacheCommands] |
---|
| 134 | jmp AH23h_SetControllerFeatures |
---|
| 135 | |
---|
| 136 | .rgbWriteCacheCommands: |
---|
| 137 | db 0 ; DEFAULT_WRITE_CACHE |
---|
| 138 | db FEATURE_DISABLE_WRITE_CACHE ; DISABLE_WRITE_CACHE |
---|
| 139 | db FEATURE_ENABLE_WRITE_CACHE ; ENABLE_WRITE_CACHE |
---|
| 140 | |
---|
| 141 | |
---|
| 142 | ;-------------------------------------------------------------------- |
---|
[150] | 143 | ; InitializeBlockMode |
---|
[3] | 144 | ; Parameters: |
---|
[150] | 145 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
[3] | 146 | ; Returns: |
---|
| 147 | ; AH: BIOS Error code |
---|
| 148 | ; CF: Cleared if succesfull |
---|
| 149 | ; Set if any error |
---|
| 150 | ; Corrupts registers: |
---|
| 151 | ; AL, BX, CX, DX |
---|
| 152 | ;-------------------------------------------------------------------- |
---|
[150] | 153 | InitializeBlockMode: |
---|
[158] | 154 | test BYTE [di+DPT.bFlagsHigh], FLGH_DPT_BLOCK_MODE_SUPPORTED ; Clear CF |
---|
[150] | 155 | jz SHORT ReturnSuccessSinceInitializationNotNeeded |
---|
| 156 | |
---|
[276] | 157 | call AccessDPT_GetPointerToDRVPARAMStoCSBX |
---|
| 158 | mov al, 1 ; Disable block mode |
---|
| 159 | test BYTE [cs:bx+DRVPARAMS.wFlags], FLG_DRVPARAMS_BLOCKMODE |
---|
| 160 | eCMOVNZ al, [di+DPT_ATA.bMaxBlock] ; Load max block size |
---|
[3] | 161 | jmp AH24h_SetBlockSize |
---|
[150] | 162 | ReturnSuccessSinceInitializationNotNeeded: |
---|
[276] | 163 | xor ah, ah |
---|
[3] | 164 | ret |
---|