source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeDPT.asm@ 617

Last change on this file since 617 was 616, checked in by Tomi Tilli, 3 years ago
  • Added check for APM
File size: 5.4 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Sets IDE Device specific parameters to DPT.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; IdeDPT_Finalize
25; Parameters:
26; DS:DI: Ptr to Disk Parameter Table
27; ES:SI: Ptr to 512-byte ATA information read from the drive
28; CS:BP: Ptr to IDEVARS for the controller
29; Returns:
30; CF: Clear, IDE interface only supports hard disks
31; Corrupts registers:
32; AX, BX, CX, DX
33;--------------------------------------------------------------------
34IdeDPT_Finalize: ; Unused entrypoint OK
35
36%ifdef MODULE_POWER_MANAGEMENT
37;--------------------------------------------------------------------
38; .DetectPowerManagementSupport
39; Parameters:
40; DS:DI: Ptr to Disk Parameter Table
41; ES:SI: Ptr to 512-byte ATA information read from the drive
42; Returns:
43; Nothing
44; Corrupts registers:
45; AL
46;--------------------------------------------------------------------
47.DetectPowerManagementSupport:
48 mov al, [es:si+ATA6.wSetSup82]
49 mov ah, [es:si+ATA6.wSetSup83]
50 and ah, A6_wSetSup83_APM
51 shl ah, 1 ; APM bit 3 to bit 4
52 and al, A6_wSetSup82_POWERMAN ; A6_wSetSup82_POWERMAN (bit 3) is the same
53 or al, ah
54 or [di+DPT.bFlagsHigh], al ; bit as FLGH_DPT_POWER_MANAGEMENT_SUPPORTED and FLGH_DPT_APM_SUPPORTED
55%endif ; MODULE_POWER_MANAGEMENT
56
57
58;--------------------------------------------------------------------
59; .StoreDeviceType
60; Parameters:
61; DS:DI: Ptr to Disk Parameter Table
62; CS:BP: Ptr to IDEVARS for the controller
63; Returns:
64; Nothing
65; Corrupts registers:
66; AL
67;--------------------------------------------------------------------
68.StoreDeviceType:
69 call IdeDPT_StoreDeviceTypeToDPTinDSDIfromIdevarsInCSBP
70
71
72;--------------------------------------------------------------------
73; .StoreBlockMode
74; Parameters:
75; DS:DI: Ptr to Disk Parameter Table
76; Returns:
77; Nothing
78; Corrupts registers:
79; Nothing
80;--------------------------------------------------------------------
81.StoreBlockMode:
82 mov BYTE [di+DPT_ATA.bBlockSize], 1
83
84
85%ifdef MODULE_ADVANCED_ATA
86;--------------------------------------------------------------------
87; .StorePioModeAndTimings
88; Parameters:
89; DS:DI: Ptr to Disk Parameter Table
90; ES:SI: Ptr to 512-byte ATA information read from the drive
91; CS:BP: Ptr to IDEVARS for the controller
92; Returns:
93; Nothing
94; Corrupts registers:
95; AX, BX, CX
96;--------------------------------------------------------------------
97.StorePioMode:
98 call AtaID_GetMaxPioModeToAXandMinCycleTimeToCX
99 mov [di+DPT_ADVANCED_ATA.wMinPioCycleTime], cx
100 mov [di+DPT_ADVANCED_ATA.bPioMode], al
101 or [di+DPT.bFlagsHigh], ah
102
103
104;--------------------------------------------------------------------
105; .DetectAdvancedIdeController
106; Parameters:
107; DS:DI: Ptr to Disk Parameter Table
108; ES:SI: Ptr to 512-byte ATA information read from the drive
109; CS:BP: Ptr to IDEVARS for the controller
110; Returns:
111; Nothing
112; Corrupts registers:
113; AX, BX, CX, DX
114;--------------------------------------------------------------------
115.DetectAdvancedIdeController:
116 ; Detection is only relevant on standard devices. XT-CF seems to give false positive for
117 ; PDC20x30 detection so better to skip detection for 8-bit devices
118 cmp BYTE [di+DPT_ATA.bDevice], DEVICE_32BIT_ATA
119 ja SHORT .NoAdvancedControllerDetected
120
121 mov bx, [di+DPT.wBasePort]
122 call AdvAtaInit_DetectControllerForIdeBaseInBX
123 mov [di+DPT_ADVANCED_ATA.wControllerID], ax ; Store zero if none detected
124 mov [di+DPT_ADVANCED_ATA.wControllerBasePort], dx
125 jnc SHORT .NoAdvancedControllerDetected
126
127 ; Use highest common PIO mode from controller and drive.
128 ; Many VLB controllers support PIO modes up to 2.
129 call AdvAtaInit_GetControllerMaxPioModeToALandMinPioCycleTimeToBX
130 jnz SHORT .ChangeTo32bitDevice
131
132 and [di+DPT.bFlagsHigh], ah ; Mask off FLGH_DPT_IORDY if IORDY not supported
133 MIN_U [di+DPT_ADVANCED_ATA.bPioMode], al
134 mov [di+DPT_ADVANCED_ATA.wMinPioCycleTime], bx
135
136 ; We have detected 32-bit controller so change Device Type since
137 ; it might have been set to 16-bit on IDEVARS
138.ChangeTo32bitDevice:
139 mov BYTE [di+DPT_ATA.bDevice], DEVICE_32BIT_ATA
140.NoAdvancedControllerDetected:
141%endif ; MODULE_ADVANCED_ATA
142
143
144; End DPT
145 clc
146 ret
147
148
149;--------------------------------------------------------------------
150; IdeDPT_StoreDeviceTypeToDPTinDSDIfromIdevarsInCSBP
151; Parameters:
152; DS:DI: Ptr to Disk Parameter Table
153; CS:BP: Ptr to IDEVARS for the controller
154; Returns:
155; Nothing
156; Corrupts registers:
157; AL
158;--------------------------------------------------------------------
159IdeDPT_StoreDeviceTypeToDPTinDSDIfromIdevarsInCSBP:
160 mov al, [cs:bp+IDEVARS.bDevice]
161 mov [di+DPT_ATA.bDevice], al
162 ret
Note: See TracBrowser for help on using the repository browser.