source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Boot/BootMenuPrintCfg.asm@ 184

; Project name  :   XTIDE Universal BIOS
; Description   :   Functions for printing drive configuration
;                   information on Boot Menu.

; Section containing code
SECTION .text

;--------------------------------------------------------------------
; Prints Hard Disk configuration for drive handled by our BIOS.
; Cursor is set to configuration header string position.
;
; BootMenuPrintCfg_ForOurDrive
;   Parameters:
;       DS:     Segment to DPT
;       Stack:  Offset to DPT
;   Returns:
;       Nothing
;   Corrupts registers:
;       AX, BX, CX, DX, SI, DI
;--------------------------------------------------------------------
ALIGN JUMP_ALIGN
BootMenuPrintCfg_ForOurDrive:
    pop     di
    mov     si, g_szCfgHeader
    call    BootMenuPrint_NullTerminatedStringFromCSSIandSetCF
    eMOVZX  ax, BYTE [di+DPT.bIdevarsOffset]
    xchg    si, ax                      ; CS:SI now points to IDEVARS
    ; Fall to PushAndFormatCfgString

;--------------------------------------------------------------------
; PushAndFormatCfgString
;   Parameters:
;       DS:DI:  Ptr to DPT
;       CS:SI:  Ptr to IDEVARS
;   Returns:
;       Nothing
;   Corrupts registers:
;       AX, DX, SI, DI
;--------------------------------------------------------------------
PushAndFormatCfgString:
    push    bp
    mov     bp, sp
    ; Fall to first push below

;--------------------------------------------------------------------
; PushAddressingMode
;   Parameters:
;       DS:DI:  Ptr to DPT
;       CS:SI:  Ptr to IDEVARS
;   Returns:
;       Nothing (jumps to next push below)
;   Corrupts registers:
;       AX
;--------------------------------------------------------------------
PushAddressingMode:
    call    AccessDPT_GetAddressingModeForWordLookToBX
    mov     al,g_szAddressingModes_Displacement
    mul     bl
    add     ax,g_szAddressingModes
    push    ax
;
; Ensure that addressing modes are correctly spaced in memory
;
%if g_szLCHS <> g_szAddressingModes
%error "g_szAddressingModes Displacement Incorrect 1"
%endif
%if g_szPCHS <> g_szLCHS + g_szAddressingModes_Displacement
%error "g_szAddressingModes Displacement Incorrect 2"
%endif
%if g_szLBA28 <> g_szPCHS + g_szAddressingModes_Displacement        
%error "g_szAddressingModes Displacement Incorrect 3"
%endif
%if g_szLBA48 <> g_szLBA28 + g_szAddressingModes_Displacement       
%error "g_szAddressingModes Displacement Incorrect 4"
%endif              
        
;--------------------------------------------------------------------
; PushBlockMode
;   Parameters:
;       DS:DI:  Ptr to DPT
;       CS:SI:  Ptr to IDEVARS
;   Returns:
;       Nothing (falls to next push below)
;   Corrupts registers:
;       AX
;--------------------------------------------------------------------
PushBlockMode:
    mov     ax, 1
    test    BYTE [di+DPT.bFlagsHigh], FLGH_DPT_BLOCK_MODE_SUPPORTED
    jz      SHORT .PushBlockSizeFromAX
    mov     al, [di+DPT_ATA.bSetBlock]
.PushBlockSizeFromAX:
    push    ax

;--------------------------------------------------------------------
; PushBusType
;   Parameters:
;       DS:DI:  Ptr to DPT
;       CS:SI:  Ptr to IDEVARS
;   Returns:
;       Nothing (jumps to next push below)
;   Corrupts registers:
;       AX, DX
;--------------------------------------------------------------------
;PushBusType:
    mov     al,g_szBusTypeValues_Displacement
    mul     BYTE [cs:si+IDEVARS.bDevice]
    shr     ax,1
    add     ax,g_szBusTypeValues
    push    ax  

;
; Ensure that bus type strings are correctly spaced in memory
;
%if g_szBusTypeValues_8Dual <> g_szBusTypeValues
%error "g_szBusTypeValues Displacement Incorrect 1"
%endif
%if g_szBusTypeValues_8Reversed <> g_szBusTypeValues + g_szBusTypeValues_Displacement
%error "g_szBusTypeValues Displacement Incorrect 2"     
%endif
%if g_szBusTypeValues_8Single <> g_szBusTypeValues_8Reversed + g_szBusTypeValues_Displacement
%error "g_szBusTypeValues Displacement Incorrect 3"             
%endif
%if g_szBusTypeValues_16 <> g_szBusTypeValues_8Single + g_szBusTypeValues_Displacement      
%error "g_szBusTypeValues Displacement Incorrect 4"             
%endif
%if g_szBusTypeValues_32 <> g_szBusTypeValues_16 + g_szBusTypeValues_Displacement
%error "g_szBusTypeValues Displacement Incorrect 5"             
%endif
%if g_szBusTypeValues_Serial <> g_szBusTypeValues_32 + g_szBusTypeValues_Displacement
%error "g_szBusTypeValues Displacement Incorrect 6"             
%endif              
                
;--------------------------------------------------------------------
; PushIRQ
;   Parameters:
;       DS:DI:  Ptr to DPT
;       CS:SI:  Ptr to IDEVARS
;   Returns:
;       Nothing (falls to next push below)
;   Corrupts registers:
;       AX, DX
;--------------------------------------------------------------------
PushIRQ:
    eMOVZX  ax, BYTE [cs:si+IDEVARS.bIRQ]
    push    ax

;--------------------------------------------------------------------
; PushResetStatus
;   Parameters:
;       DS:DI:  Ptr to DPT
;       CS:SI:  Ptr to IDEVARS
;   Returns:
;       Nothing (falls to next push below)
;   Corrupts registers:
;       AX
;--------------------------------------------------------------------
PushResetStatus:
    mov     al, [di+DPT.bFlagsHigh]
    and     ax, MASKH_DPT_RESET
    push    ax

;--------------------------------------------------------------------
; PrintValuesFromStack
;   Parameters:
;       Stack:  All formatting parameters
;   Returns:
;       Nothing
;   Corrupts registers:
;       AX, SI, DI
;--------------------------------------------------------------------
PrintValuesFromStack:
    mov     si, g_szCfgFormat
    jmp     BootMenuPrint_FormatCSSIfromParamsInSSBP