| 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : Defines for ROMVARS struct containing variables stored
|
|---|
| 3 | ; in BIOS ROM.
|
|---|
| 4 |
|
|---|
| 5 | ;
|
|---|
| 6 | ; XTIDE Universal BIOS and Associated Tools
|
|---|
| 7 | ; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
|
|---|
| 8 | ;
|
|---|
| 9 | ; This program is free software; you can redistribute it and/or modify
|
|---|
| 10 | ; it under the terms of the GNU General Public License as published by
|
|---|
| 11 | ; the Free Software Foundation; either version 2 of the License, or
|
|---|
| 12 | ; (at your option) any later version.
|
|---|
| 13 | ;
|
|---|
| 14 | ; This program is distributed in the hope that it will be useful,
|
|---|
| 15 | ; but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|---|
| 16 | ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|---|
| 17 | ; GNU General Public License for more details.
|
|---|
| 18 | ; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
|
|---|
| 19 | ;
|
|---|
| 20 |
|
|---|
| 21 | %ifndef ROMVARS_INC
|
|---|
| 22 | %define ROMVARS_INC
|
|---|
| 23 |
|
|---|
| 24 |
|
|---|
| 25 | ; Master/Slave drive specific parameters
|
|---|
| 26 | struc DRVPARAMS
|
|---|
| 27 | .wFlags resb 2 ; Drive flags
|
|---|
| 28 | .dwMaximumLBA: ; User specified maximum number of sectors
|
|---|
| 29 | .wCylinders resb 2 ; User specified cylinders (1...16383)
|
|---|
| 30 | .wHeadsAndSectors:
|
|---|
| 31 | .bHeads resb 1 ; User specified Heads (1...16)
|
|---|
| 32 | .bSect resb 1 ; User specified Sectors per track (1...63)
|
|---|
| 33 | endstruc
|
|---|
| 34 |
|
|---|
| 35 | ; Bit defines for DRVPARAMS.wFlags - these flags are accessed as bytes so changes here might require changes elsewhere
|
|---|
| 36 | MASK_DRVPARAMS_WRITECACHE EQU (3<<0) ; Bits 0...1, Drive internal write cache settings (must start at bit 0)
|
|---|
| 37 | DEFAULT_WRITE_CACHE EQU 0 ; Must be 0
|
|---|
| 38 | DISABLE_WRITE_CACHE EQU 1
|
|---|
| 39 | ENABLE_WRITE_CACHE EQU 2
|
|---|
| 40 | MASK_DRVPARAMS_TRANSLATEMODE EQU (3<<TRANSLATEMODE_FIELD_POSITION) ; Bits 2...3, Position shared with DPT
|
|---|
| 41 | TRANSLATEMODE_FIELD_POSITION EQU 2
|
|---|
| 42 | TRANSLATEMODE_NORMAL EQU 0 ; Must be zero
|
|---|
| 43 | TRANSLATEMODE_LARGE EQU 1
|
|---|
| 44 | TRANSLATEMODE_ASSISTED_LBA EQU 2 ; 28-bit or 48-bit LBA
|
|---|
| 45 | TRANSLATEMODE_AUTO EQU 3 ; Only available in ROMVARS, not in DPTs
|
|---|
| 46 | FLG_DRVPARAMS_BLOCKMODE EQU (1<<4) ; Enable Block mode transfers
|
|---|
| 47 | FLG_DRVPARAMS_USERCHS EQU (1<<5) ; User specified P-CHS values
|
|---|
| 48 | FLG_DRVPARAMS_USERLBA EQU (1<<6) ; User specified LBA value
|
|---|
| 49 | FLG_DRVPARAMS_DO_NOT_DETECT EQU (1<<7) ; Disable detection of drive
|
|---|
| 50 |
|
|---|
| 51 |
|
|---|
| 52 | ; Controller specific variables
|
|---|
| 53 | struc IDEVARS
|
|---|
| 54 | ;;; Word 0
|
|---|
| 55 | .wSerialPortAndBaud: ; Serial connection port (low, divided by 4) and baud rate divisor (high)
|
|---|
| 56 | .wBasePort: ; IDE Base Port for Command Block (usual) Registers
|
|---|
| 57 | .bSerialPort resb 1
|
|---|
| 58 | .bSerialBaud resb 1
|
|---|
| 59 |
|
|---|
| 60 | ;;; Word 1
|
|---|
| 61 | .wControlBlockPort:
|
|---|
| 62 | .bSerialUnused resb 1 ; IDE Base Port for Control Block Registers
|
|---|
| 63 |
|
|---|
| 64 | .wSerialCOMPortCharAndDevice: ; In DetectPrint, we grab the COM Port char and Device at the same time
|
|---|
| 65 | .bSerialCOMPortChar resb 1 ; Serial connection COM port number/letter
|
|---|
| 66 |
|
|---|
| 67 | ;;; Word 2
|
|---|
| 68 | .bDevice resb 1 ; Device type
|
|---|
| 69 | .bIRQ resb 1 ; Interrupt Request Number
|
|---|
| 70 |
|
|---|
| 71 | ;;; And more...
|
|---|
| 72 | .drvParamsMaster resb DRVPARAMS_size
|
|---|
| 73 | .drvParamsSlave resb DRVPARAMS_size
|
|---|
| 74 | endstruc
|
|---|
| 75 |
|
|---|
| 76 | %ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
|
|---|
| 77 | %if IDEVARS.bSerialCOMPortChar+1 != IDEVARS.bDevice
|
|---|
| 78 | %error "IDEVARS.bSerialCOMPortChar needs to come immediately before IDEVARS.bDevice so that both bytes can be fetched at the same time inside DetectPrint.asm"
|
|---|
| 79 | %endif
|
|---|
| 80 | %endif
|
|---|
| 81 |
|
|---|
| 82 | STANDARD_CONTROL_BLOCK_OFFSET EQU 200h
|
|---|
| 83 | XTIDE_CONTROL_BLOCK_OFFSET EQU 8h ; For XTIDE, A3 is used to control selected register (CS0 vs CS1)...
|
|---|
| 84 | XTCF_CONTROL_BLOCK_OFFSET EQU 10h ; ...and for XT-CF (all variants), it's A4
|
|---|
| 85 | ADP50L_CONTROL_BLOCK_OFFSET EQU 10h
|
|---|
| 86 |
|
|---|
| 87 | ; Default values for Port and PortCtrl, shared with the configurator
|
|---|
| 88 | ;
|
|---|
| 89 | DEVICE_XTIDE_DEFAULT_PORT EQU 300h ; Also the default port for XT-CF
|
|---|
| 90 | DEVICE_XTIDE_DEFAULT_PORTCTRL EQU (DEVICE_XTIDE_DEFAULT_PORT + XTIDE_CONTROL_BLOCK_OFFSET)
|
|---|
| 91 | ; Note XT-CF control port is SHL 1 relative to XTIDE, and coded that way hence no need for specific definition like...
|
|---|
| 92 | ; DEVICE_XTCF_DEFAULT_PORTCTRL EQU (DEVICE_XTIDE_DEFAULT_PORT + XTCF_CONTROL_BLOCK_OFFSET)
|
|---|
| 93 |
|
|---|
| 94 | DEVICE_ATA_PRIMARY_PORT EQU 1F0h
|
|---|
| 95 | DEVICE_ATA_PRIMARY_PORTCTRL EQU (DEVICE_ATA_PRIMARY_PORT + STANDARD_CONTROL_BLOCK_OFFSET)
|
|---|
| 96 |
|
|---|
| 97 | DEVICE_ATA_SECONDARY_PORT EQU 170h
|
|---|
| 98 | DEVICE_ATA_SECONDARY_PORTCTRL EQU (DEVICE_ATA_SECONDARY_PORT + STANDARD_CONTROL_BLOCK_OFFSET)
|
|---|
| 99 |
|
|---|
| 100 | DEVICE_ATA_TERTIARY_PORT EQU 1E8h
|
|---|
| 101 | DEVICE_ATA_TERTIARY_PORTCTRL EQU (DEVICE_ATA_TERTIARY_PORT + STANDARD_CONTROL_BLOCK_OFFSET)
|
|---|
| 102 |
|
|---|
| 103 | DEVICE_ATA_QUATERNARY_PORT EQU 168h
|
|---|
| 104 | DEVICE_ATA_QUATERNARY_PORTCTRL EQU (DEVICE_ATA_QUATERNARY_PORT + STANDARD_CONTROL_BLOCK_OFFSET)
|
|---|
| 105 |
|
|---|
| 106 |
|
|---|
| 107 | ; Device types for IDEVARS.bDevice
|
|---|
| 108 | ; IDE Devices are grouped so device numbers cannot be changed without modifying code elsewhere!
|
|---|
| 109 | COUNT_OF_STANDARD_IDE_DEVICES EQU 2 ; 16- and 32-bit controllers
|
|---|
| 110 | COUNT_OF_8BIT_IDE_DEVICES EQU 10
|
|---|
| 111 | COUNT_OF_ALL_IDE_DEVICES EQU (COUNT_OF_8BIT_IDE_DEVICES + COUNT_OF_STANDARD_IDE_DEVICES)
|
|---|
| 112 | ; Standard port mapped I/O
|
|---|
| 113 | DEVICE_16BIT_ATA EQU (0<<1)
|
|---|
| 114 | DEVICE_32BIT_ATA EQU (1<<1)
|
|---|
| 115 | DEVICE_8BIT_ATA EQU ((COUNT_OF_STANDARD_IDE_DEVICES+0)<<1) ; 16- or 32-bit controller in 8-bit mode
|
|---|
| 116 | DEVICE_8BIT_XTIDE_REV1 EQU ((COUNT_OF_STANDARD_IDE_DEVICES+1)<<1)
|
|---|
| 117 | ; Address lines A0 and A3 are swapped
|
|---|
| 118 | DEVICE_8BIT_XTIDE_REV2 EQU ((COUNT_OF_STANDARD_IDE_DEVICES+2)<<1) ; Or rev 1 with swapped A0 and A3...
|
|---|
| 119 | DEVICE_8BIT_XTIDE_REV2_OLIVETTI EQU ((COUNT_OF_STANDARD_IDE_DEVICES+3)<<1) ; ...in Olivetti M24 and derivatives
|
|---|
| 120 | ; IDE Register offsets are SHL 1
|
|---|
| 121 | DEVICE_8BIT_XTCF_PIO8 EQU ((COUNT_OF_STANDARD_IDE_DEVICES+4)<<1) ; XT-CF using 8-bit PIO mode
|
|---|
| 122 | DEVICE_8BIT_XTCF_PIO8_WITH_BIU_OFFLOAD EQU ((COUNT_OF_STANDARD_IDE_DEVICES+5)<<1) ; XT-CF using 8-bit PIO mode, but with 16-bit instructions
|
|---|
| 123 | DEVICE_8BIT_XTCF_PIO16_WITH_BIU_OFFLOAD EQU ((COUNT_OF_STANDARD_IDE_DEVICES+6)<<1) ; Lo-tech 8-bit IDE Adapter
|
|---|
| 124 | DEVICE_8BIT_XTCF_DMA EQU ((COUNT_OF_STANDARD_IDE_DEVICES+7)<<1) ; XT-CFv3 using DMA
|
|---|
| 125 | ; Memory Mapped I/O
|
|---|
| 126 | DEVICE_8BIT_JRIDE_ISA EQU ((COUNT_OF_STANDARD_IDE_DEVICES+8)<<1) ; JR-IDE/ISA (Memory Mapped I/O)
|
|---|
| 127 | DEVICE_8BIT_ADP50L EQU ((COUNT_OF_STANDARD_IDE_DEVICES+9)<<1) ; SVC ADP50L (Memory Mapped I/O)
|
|---|
| 128 | ; Virtual devices
|
|---|
| 129 | DEVICE_SERIAL_PORT EQU (COUNT_OF_ALL_IDE_DEVICES<<1)
|
|---|
| 130 |
|
|---|
| 131 | FIRST_XTCF_DEVICE EQU DEVICE_8BIT_XTCF_PIO8
|
|---|
| 132 | LAST_XTCF_DEVICE EQU DEVICE_8BIT_XTCF_DMA
|
|---|
| 133 | XTCF_DEVICE_OFFSET EQU FIRST_XTCF_DEVICE ; Used for XT-CF device <--> mode conversion
|
|---|
| 134 |
|
|---|
| 135 |
|
|---|
| 136 | ; ROM Variables. Written to the ROM image before flashing.
|
|---|
| 137 | struc ROMVARS
|
|---|
| 138 | .wRomSign resb 2 ; ROM Signature (AA55h)
|
|---|
| 139 | .bRomSize resb 1 ; ROM size in 512 byte blocks
|
|---|
| 140 | .rgbJump resb 3 ; First instruction to ROM init (jmp)
|
|---|
| 141 |
|
|---|
| 142 | .rgbSign resb 6 ; Signature for XTIDE Configurator Program (must be even length)
|
|---|
| 143 | .szTitle resb 31 ; BIOS title string
|
|---|
| 144 | .szVersion resb 19 ; BIOS version string (supports up to r9999)
|
|---|
| 145 |
|
|---|
| 146 | .wFlags resb 2 ; Word for ROM flags
|
|---|
| 147 | .wDisplayMode resb 2 ; Display mode for boot menu
|
|---|
| 148 | .wBootTimeout resb 2 ; Boot Menu selection timeout in system timer ticks
|
|---|
| 149 | .pColorTheme resb 2 ; Ptr to the color attribute struc used by the boot menu and hotkey bar
|
|---|
| 150 | .bIdeCnt resb 1 ; Number of available IDE controllers
|
|---|
| 151 | .bBootDrv resb 1 ; Default drive to boot from
|
|---|
| 152 | .bMinFddCnt resb 1 ; Minimum number of Floppy Drives
|
|---|
| 153 | .bStealSize resb 1 ; Number of 1kB blocks stolen from 640kB base RAM
|
|---|
| 154 | .bIdleTimeout resb 1 ; Standby timer value
|
|---|
| 155 |
|
|---|
| 156 | alignb 2 ; WORD align the IDEVARS structures
|
|---|
| 157 | .ideVarsBegin:
|
|---|
| 158 | .ideVars0 resb IDEVARS_size
|
|---|
| 159 | .ideVars1 resb IDEVARS_size
|
|---|
| 160 | .ideVars2 resb IDEVARS_size
|
|---|
| 161 | .ideVars3 resb IDEVARS_size
|
|---|
| 162 |
|
|---|
| 163 | %ifdef MODULE_SERIAL
|
|---|
| 164 | .ideVarsSerialAuto resb IDEVARS_size
|
|---|
| 165 | %endif
|
|---|
| 166 |
|
|---|
| 167 | .ideVarsEnd:
|
|---|
| 168 | endstruc
|
|---|
| 169 |
|
|---|
| 170 | %ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
|
|---|
| 171 | %if ROMVARS.ideVarsEnd & 0xff00 <> 0
|
|---|
| 172 | %error ".ideVars structures must fit within the first 256 bytes of the ROM image"
|
|---|
| 173 | %endif
|
|---|
| 174 | %if (ROMVARS.ideVarsEnd - ROMVARS.ideVarsBegin) = 0
|
|---|
| 175 | %error "there must be at least one .ideVars structure, it would be bizarre if this were not true, but it is assumed in the ah0h reset code."
|
|---|
| 176 | %endif
|
|---|
| 177 | %endif
|
|---|
| 178 |
|
|---|
| 179 | NUMBER_OF_IDEVARS EQU ((ROMVARS.ideVarsEnd - ROMVARS.ideVarsBegin) / IDEVARS_size)
|
|---|
| 180 |
|
|---|
| 181 | ; Bit defines for ROMVARS.wFlags
|
|---|
| 182 | FLG_ROMVARS_FULLMODE EQU (1<<0) ; Full operating mode (steals base RAM, supports EBIOS etc.)
|
|---|
| 183 | FLG_ROMVARS_CLEAR_BDA_HD_COUNT EQU (1<<1) ; This flag has two purposes; * Removes the system BIOS "dummy" drive
|
|---|
| 184 | ; so that Windows 9x protected mode drivers can be used with XUB drives.
|
|---|
| 185 | ; * Some computers (Zenith Z-171 and Z-161) do not clear the BDA hard
|
|---|
| 186 | ; drive count which causes it to increment on each warm boot.
|
|---|
| 187 | FLG_ROMVARS_SERIAL_SCANDETECT EQU (1<<3) ; Scan COM ports at the end of drive detection. Can also be invoked
|
|---|
| 188 | ; by holding down the ALT key at the end of drive detection.
|
|---|
| 189 | ; (Conveniently, this is 8, a fact we exploit when testing the bit)
|
|---|
| 190 |
|
|---|
| 191 | ; Here in case the configuration needs to know functionality is present. Note! Changing the order/location of these flags
|
|---|
| 192 | ; also requires changes elsewhere as they are usually tested using byte-accesses for efficiency.
|
|---|
| 193 | FLG_ROMVARS_MODULE_POWER_MANAGEMENT EQU (1<<5)
|
|---|
| 194 | FLG_ROMVARS_MODULE_8BIT_IDE EQU (1<<6)
|
|---|
| 195 | FLG_ROMVARS_MODULE_8BIT_IDE_ADVANCED EQU (1<<7)
|
|---|
| 196 | FLG_ROMVARS_MODULE_ADVANCED_ATA EQU (1<<8)
|
|---|
| 197 | FLG_ROMVARS_MODULE_BOOT_MENU EQU (1<<9)
|
|---|
| 198 | FLG_ROMVARS_MODULE_EBIOS EQU (1<<10)
|
|---|
| 199 | FLG_ROMVARS_MODULE_HOTKEYS EQU (1<<11)
|
|---|
| 200 | FLG_ROMVARS_MODULE_IRQ EQU (1<<12)
|
|---|
| 201 | FLG_ROMVARS_MODULE_SERIAL EQU (1<<13)
|
|---|
| 202 | FLG_ROMVARS_MODULE_SERIAL_FLOPPY EQU (1<<14)
|
|---|
| 203 | FLG_ROMVARS_MODULE_STRINGS_COMPRESSED EQU (1<<15)
|
|---|
| 204 |
|
|---|
| 205 |
|
|---|
| 206 | ; Boot Menu Display Modes (see Assembly Library Display.inc for standard modes)
|
|---|
| 207 | DEFAULT_TEXT_MODE EQU 4
|
|---|
| 208 |
|
|---|
| 209 |
|
|---|
| 210 | %endif ; ROMVARS_INC
|
|---|
