Context Navigation

IDE_8bit.inc@ 590

Visit:

Last change on this file since 590 was 589, checked in by Krister Nordvall, 8 years ago

Changes:

BIOS: Fixed a purely cosmetic bug from r542 where, in builds containing MODULE_EBIOS, the boot menu would display an incorrect drive size (0.4 kB with MODULE_STRINGS_COMPRESSED or 0.5 kB without) for old drives with no support for LBA.
Fixed a bug from r392 where Vision_DetectAndReturnIDinAXandPortInDXifControllerPresent would return the ID in AL instead of AH (if DANGEROUS_DETECTION had been defined).
Fixed a bug from r587 in AdvAtaInit.asm that would prevent detection of QDI Vision controllers.
Also changed how the QDI Vision IDs are defined (removed the need for shifting) to avoid confusion. This fixed a potential bug from r587 in AdvAtaInit.asm where some IDs were not being shifted.
Fixed a bug in PDC20x30.asm from r587 where GetPdcIDtoAX would not return with the IDE base port in DX so DisablePdcProgrammingMode would fail.
Made some changes to ModuleDependency.inc and other files so that MODULE_ADVANCED_ATA now requires USE_386. Consequently it is no longer included in the regular AT-builds, only in the 386_8k-build.
Moved the UNROLL_SECTORS_IN_CX_TO_xWORDS macros from IDE_8bit.inc to IdeIO.inc which means it's now possible to build a BIOS without MODULE_8BIT_IDE.
XTIDECFG: Added a minimum DOS version check (since it needs DOS version 2+) to allow the program to quit gracefully in the unlikely scenario where someone tries to run it under DOS version 1.
Made some changes to Drive.asm to improve drive enumeration. The old method using GET_DOS_DRIVE_PARAMETER_BLOCK_FOR_SPECIFIC_DRIVE worked well in Windows XP but not in Windows 98 SE (in Windows or in DOS mode). The two problems were; 1) The function call would access the drives which on single floppy drive systems would cause Windows to swap between A: and B: (throwing a blue screen asking the user to insert a disk etc). 2) Only floppy drives and FAT16 drives would be available in the list of drives, no FAT32/optical/network drives.
Improved code in IdeControllerMenu.asm so that the default port addresses for all IDE interfaces are now restored when (re-)selecting the (same) type of IDE device.
Also made it impossible to select a device type unless the required module is included in the loaded BIOS.
The version check done when loading a BIOS now uses the FLASH_SIGNATURE definition from Version.inc. Any changes affecting RomVars now only requires updating that definition. This means that changes to RomVars must be implemented in both the BIOS and XTIDECFG before being committed to the repository.
Added a compatibility fix for 3Com 3C503 cards to the ROM checksumming code in Buffers.asm (Buffers_GenerateChecksum).
SerDrive: Made some minor changes to file names and paths to improve compatibility with case sensitive environments.
BIOSDRVS: Made a minor size optimization which as a side effect also makes it compatible with all DOS versions including DOS version 1.
Library: Renamed the WAIT_RETRACE_IF_NECESSARY_THEN macro to CALL_WAIT_FOR_RETRACE_IF_NECESSARY_THEN and made a tail-call-optimized version of it (JMP_WAIT_FOR_RETRACE_IF_NECESSARY_THEN).
A speed optimization to the eRCL_IM macro for 386 and higher. This change breaks emulation in the sense that the macro will fail when given a memory operand as the first parameter.
Other minor optimizations and fixes.

File size: 4.0 KB

Rev	Line
[150]	1	; Project name : XTIDE Universal BIOS
[3]	2	; Description : Macros for accessing data port(s) on 8-bit
	3	; IDE controllers.
[376]	4
	5	;
[445]	6	; XTIDE Universal BIOS and Associated Tools
[526]	7	; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
[376]	8	;
	9	; This program is free software; you can redistribute it and/or modify
	10	; it under the terms of the GNU General Public License as published by
	11	; the Free Software Foundation; either version 2 of the License, or
	12	; (at your option) any later version.
[445]	13	;
[376]	14	; This program is distributed in the hope that it will be useful,
	15	; but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
[445]	17	; GNU General Public License for more details.
[376]	18	; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
	19	;
	20
[3]	21	%ifndef IDE_8BIT_INC
	22	%define IDE_8BIT_INC
	23
	24	;--------------------------------------------------------------------
[152]	25	; Emulates INSW for XTIDE.
[3]	26	;
[152]	27	; XTIDE_INSW
[3]	28	; Parameters:
[370]	29	; BL: Bit mask for toggling XTIDE data low/high reg
[152]	30	; DX: XTIDE Data Low Register address
[3]	31	; ES:DI: Ptr to destination buffer
	32	; Returns:
	33	; ES:DI: Incremented/decremented for next word
	34	; Corrupts registers:
	35	; AL, FLAGS
	36	;--------------------------------------------------------------------
[152]	37	%macro XTIDE_INSW 0
[3]	38	%ifdef USE_186 ; INS instruction available
	39	insb ; Load low byte from port DX to [ES:DI]
[370]	40	xor dl, bl ; IDE Data Reg to XTIDE Data High Reg
[3]	41	insb ; Load high byte from port DX to [ES:DI]
[370]	42	xor dl, bl ; Restore to IDE Data Register
[3]	43	%else ; If 8088/8086
	44	in al, dx ; Load low byte from port
[370]	45	xor dl, bl ; IDE Data Reg to XTIDE Data High Reg
[3]	46	stosb ; Store byte to [ES:DI]
	47	in al, dx ; Load high byte from port
[370]	48	xor dl, bl ; Restore to IDE Data Register
[3]	49	stosb ; Store byte to [ES:DI]
	50	%endif
	51	%endmacro
	52
	53
	54	;--------------------------------------------------------------------
[152]	55	; Emulates OUTSW for XTIDE.
[3]	56	;
[152]	57	; XTIDE_OUTSW
[3]	58	; Parameters:
[370]	59	; BL: Bit mask for toggling XTIDE data low/high reg
[152]	60	; DX: XTIDE Data Low Register address
[3]	61	; DS:SI: Ptr to source buffer
	62	; Returns:
	63	; SI: Incremented/decremented for next word
	64	; Corrupts registers:
	65	; AX, FLAGS
	66	;--------------------------------------------------------------------
[152]	67	%macro XTIDE_OUTSW 0
[3]	68	%ifdef USE_186 ; OUTS instruction available
	69	lodsb ; Load low byte from [DS:SI] to AL
[370]	70	xor dl, bl ; IDE Data Reg to XTIDE Data High Reg
[3]	71	outsb ; Output high byte from [DS:SI]
[370]	72	xor dl, bl ; XTIDE Data High Reg to Data Low Reg
[3]	73	out dx, al ; Output low byte from AL
	74	%else ; If 8088/8086
	75	lodsw ; Load word from [DS:SI]
[370]	76	xor dl, bl ; IDE Data Reg to XTIDE Data High Reg
[3]	77	xchg al, ah ; => AL=high byte, AH=low byte
	78	out dx, al ; Output high byte
[370]	79	xor dl, bl ; XTIDE Data High Reg to Data Low Reg
[3]	80	mov al, ah ; Copy low byte to AL
	81	out dx, al ; Output low byte
	82	%endif
	83	%endmacro
	84
	85
[152]	86	;--------------------------------------------------------------------
	87	; Emulates OUTSW for modified XTIDE.
	88	;
	89	; XTIDE_MOD_OUTSW
	90	; Parameters:
	91	; DX: XTIDE Data Low Register address
	92	; DS:SI: Ptr to source buffer
	93	; Returns:
	94	; SI: Incremented/decremented for next word
	95	; Corrupts registers:
	96	; AX, FLAGS
	97	;--------------------------------------------------------------------
	98	%macro XTIDE_MOD_OUTSW 0
	99	%ifdef USE_186 ; OUTS instruction available
	100	lodsb ; Load low byte from [DS:SI] to AL
	101	inc dx ; IDE Data Reg to XTIDE MOD Data High Reg
	102	outsb ; Output high byte from [DS:SI]
	103	dec dx ; XTIDE Data High Reg to Data Low Reg
	104	out dx, al ; Output low byte from AL
	105	%else ; If 8088/8086
	106	lodsw ; Load word from [DS:SI]
	107	inc dx ; IDE Data Reg to XTIDE MOD Data High Reg
	108	xchg al, ah ; => AL=high byte, AH=low byte
	109	out dx, al ; Output high byte
	110	dec dx ; XTIDE Data High Reg to Data Low Reg
	111	mov al, ah ; Copy low byte to AL
	112	out dx, al ; Output low byte
	113	%endif
	114	%endmacro
	115
	116
[3]	117	%endif ; IDE_8BIT_INC

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format