source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Inc/CustomDPT.inc@ 416

; Project name  :   XTIDE Universal BIOS
; Description   :   Defines for DPT structs containing custom
;                   Disk Parameter Table used by this BIOS.

;
; XTIDE Universal BIOS and Associated Tools
; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
;
; This program is free software; you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation; either version 2 of the License, or
; (at your option) any later version.
;
; This program is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
; GNU General Public License for more details.
; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
;

%ifndef CUSTOMDPT_INC
%define CUSTOMDPT_INC

; Base DPT for all device types
struc DPT   ; 10 bytes
    ; General Disk Parameter Table related
    .wFlags:
    .bFlagsLow              resb    1
    .bFlagsHigh             resb    1
    .bIdevarsOffset         resb    1   ; Offset to IDEVARS for this drive

    ; IDE Drive related
    ; .bLbaHeads and .twLbaSectors are used for LBA addressing only.
    .bLbaHeads:             resb    1   ; Number of LBA assisted heads (1...255)
    .twLbaSectors           resb    2   ; 48-bit sector count for LBA addressing

    ; .wPchsCylinders and .bPchsSectors are used for CHS addressing only.
    .wPchsCylinders         resb    2   ; Number of P-CHS Cylinders (1...16383)
    .wPchsHeadsAndSectors:
    .bPchsHeads             resb    1   ; Number of P-CHS heads (1...16)
    .bPchsSectors           resb    1   ; Number of P-CHS Sectors per Track (1...63)
endstruc

    ; Bit definitions for DPT.bFlagsLow
    MASKL_DPT_CHS_SHIFT_COUNT                   EQU (7<<0)  ; Bits 0...2, P-CHS to L-CHS bit shift count (0...4)
    FLGL_DPT_SLAVE                              EQU FLG_DRVNHEAD_DRV    ; (1<<4), Drive is slave drive
    MASKL_DPT_ADDRESSING_MODE                   EQU (3<<ADDRESSING_MODE_FIELD_POSITION) ; Bits 5..6, Addressing Mode (bit 6 == FLG_DRVNHEAD_LBA)
%ifdef MODULE_IRQ
    FLGL_DPT_ENABLE_IRQ                         EQU (1<<7)
%endif

    ; Bit definitions for DPT.bFlagsHigh
    FLGH_DPT_BLOCK_MODE_SUPPORTED               EQU (1<<1)  ; Use block transfer commands (must be bit 1!)
%ifdef MODULE_SERIAL
    FLGH_DPT_SERIAL_DEVICE                      EQU (1<<2)  ; Serial Port Device
%endif
%ifdef MODULE_IRQ
    FLGH_DPT_INTERRUPT_IN_SERVICE               EQU (1<<3)  ; Set when waiting for IRQ
%endif
%ifdef MODULE_FEATURE_SETS
    FLGH_DPT_POWER_MANAGEMENT_SUPPORTED         EQU (1<<5)
%endif

    ; IDE device only
%ifdef MODULE_ADVANCED_ATA
    FLGH_DPT_IORDY                              EQU (1<<7)  ; Controller and Drive supports IORDY
%endif

    ; Serial device only
%ifdef MODULE_SERIAL_FLOPPY
    FLGH_DPT_SERIAL_FLOPPY                      EQU (1<<4)
    FLGH_DPT_SERIAL_FLOPPY_TYPE_MASK            EQU 0e0h
    FLGH_DPT_SERIAL_FLOPPY_TYPE_FIELD_POSITION  EQU 5
%endif

    ; Addressing modes for DPT.wFlags
    ADDRESSING_MODE_FIELD_POSITION              EQU     5
    ADDRESSING_MODE_LCHS                        EQU     0   ; L-CHS Addressing Mode (NORMAL in many other BIOSes)
    ADDRESSING_MODE_PCHS                        EQU     1   ; P-CHS Addressing Mode (LARGE in many other BIOSes)
    ADDRESSING_MODE_LBA28                       EQU     2   ; 28-bit LBA Addressing Mode
%ifdef MODULE_EBIOS
    ADDRESSING_MODE_LBA48                       EQU     3   ; 48-bit LBA Addressing Mode
%endif


; DPT for ATA devices
struc DPT_ATA   ; 10 + 2 bytes = 12 bytes
    .dpt                    resb    DPT_size
    .bBlockSize             resb    1   ; Current block size in sectors (do not set to zero!)
    .bDevice                resb    1   ; Device Type from IDEVARS (overrided when 32-bit controller detected)
endstruc


; Additional variables needed to initialize and reset Advanced IDE Controllers.
; EBDA must be reserved for DPTs when using these!
%ifdef MODULE_ADVANCED_ATA
struc DPT_ADVANCED_ATA
    .dpt_ata                resb    DPT_ATA_size
    .wControllerID          resb    2   ; Controller specific ID WORD (from Advanced Controller detection)
    .wControllerBasePort    resb    2   ; Advanced Controller port (not IDE port)
    .wMinPioCycleTime       resb    2   ; Minimum PIO Cycle Time in ns
    .bPioMode               resb    1   ; Best supported PIO mode
    .bInitError             resb    1   ; Flags for initialization errors
endstruc

    ; Flags for DPT_ADVANCED_ATA.bInitError
    FLG_INITERROR_FAILED_TO_SELECT_DRIVE                EQU (1<<0)
    FLG_INITERROR_FAILED_TO_INITIALIZE_CHS_PARAMETERS   EQU (1<<1)
    FLG_INITERROR_FAILED_TO_SET_WRITE_CACHE             EQU (1<<2)
    FLG_INITERROR_FAILED_TO_RECALIBRATE_DRIVE           EQU (1<<3)
    FLG_INITERROR_FAILED_TO_SET_BLOCK_MODE              EQU (1<<4)
    FLG_INITERROR_FAILED_TO_SET_PIO_MODE                EQU (1<<5)
    FLG_INITERROR_FAILED_TO_INITIALIZE_STANDBY_TIMER    EQU (1<<6)
%endif


; DPT for Serial devices
%ifdef MODULE_SERIAL
struc DPT_SERIAL
    .dpt                    resb    DPT_size
    .wSerialPortAndBaud:
    .bSerialPort            resb    1   ; Serial connection I/O port address, divided by 4
    .bSerialBaud            resb    1   ; Serial connection baud rate divisor
endstruc
%endif


; This is the common size for all DPTs. All DPTs must be equal size.
%ifdef MODULE_ADVANCED_ATA
    LARGEST_DPT_SIZE            EQU     DPT_ADVANCED_ATA_size
%else
    LARGEST_DPT_SIZE            EQU     DPT_ATA_size
%endif


    ; Number of Sectors per Track is fixed to 63 for LBA assist calculation.
    ; 1024 cylinders, 256 heads, 63 sectors = 8.4 GB limit (but DOS does not support more than 255 heads)
    MAX_LCHS_CYLINDERS          EQU     1024
    LBA_ASSIST_SPT              EQU     63


;--------------------------------------------------------------------
; LIMIT_LBA_CYLINDERS_IN_DXAX_TO_LCHS_CYLINDERS
;   Parameters:
;       DX:AX:  Number of LBA cylinders
;   Returns:
;       AX:     Number of L-CHS cylinders
;   Corrupts registers:
;       Nothing
;--------------------------------------------------------------------
%macro LIMIT_LBA_CYLINDERS_IN_DXAX_TO_LCHS_CYLINDERS 0
    test    dx, dx
    jnz     SHORT %%LoadMaxValueToAX
    cmp     ax, MAX_LCHS_CYLINDERS
    jb      SHORT %%NoNeedToModify
%%LoadMaxValueToAX:
    mov     ax, MAX_LCHS_CYLINDERS
%%NoNeedToModify:
%endmacro


%endif ; CUSTOMDPT_INC