| [587] | 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : Promise PDC 20230-C and 20630 VLB IDE controller
|
|---|
| 3 | ; specifications.
|
|---|
| 4 |
|
|---|
| 5 | ;
|
|---|
| 6 | ; XTIDE Universal BIOS and Associated Tools
|
|---|
| 7 | ; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
|
|---|
| 8 | ;
|
|---|
| 9 | ; This program is free software; you can redistribute it and/or modify
|
|---|
| 10 | ; it under the terms of the GNU General Public License as published by
|
|---|
| 11 | ; the Free Software Foundation; either version 2 of the License, or
|
|---|
| 12 | ; (at your option) any later version.
|
|---|
| 13 | ;
|
|---|
| 14 | ; This program is distributed in the hope that it will be useful,
|
|---|
| 15 | ; but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|---|
| 16 | ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|---|
| 17 | ; GNU General Public License for more details.
|
|---|
| 18 | ; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
|
|---|
| 19 | ;
|
|---|
| 20 |
|
|---|
| 21 | %ifndef PDC20x30_INC
|
|---|
| 22 | %define PDC20x30_INC
|
|---|
| 23 |
|
|---|
| [622] | 24 | ;
|
|---|
| [587] | 25 |
|
|---|
| [622] | 26 | ; SECTOR_COUNT_REGISTER (1F2) in programming mode
|
|---|
| 27 | FLG_PDCSCR_BOTHMAX EQU (1<<6) ; Master and Slave at maximum speed
|
|---|
| [587] | 28 |
|
|---|
| [622] | 29 | ; SECTOR_NUMBER_REGISTER (1F3) in programming mode
|
|---|
| 30 | FLG_PDCSNR_UNKNOWN_BIT7 EQU (1<<7) ; Set to 1 for speed setting 7 of device 0 or 1
|
|---|
| 31 | FLG_PDCSNR_ID3 EQU (1<<6) ; VLB bus speed: 0 > 33 MHz, 1 <= 33 MHz
|
|---|
| 32 | POS_PDCSNR_DEV0SPEED EQU 3
|
|---|
| 33 | MASK_PDCSNR_DEV0SPEED EQU (7<<POS_PDCSNR_DEV0SPEED) ; 0 to 7
|
|---|
| 34 | MASK_PDCSNR_DEV1SPEED EQU (7<<0) ; 0 to 7
|
|---|
| [587] | 35 |
|
|---|
| [622] | 36 | ; Disassembly of VG4.BIN: (might have errors)
|
|---|
| 37 | ; FLG_PDCSNR_UNKNOWN_BIT7 will be set if no dev1, no matter what speed
|
|---|
| 38 | ; FLG_PDCSNR_UNKNOWN_BIT7 will be cleared if dev1 found but no master
|
|---|
| 39 | ; FLG_PDCSNR_UNKNOWN_BIT7 will be cleared if dev0 and dev1 speeds are both 7 !
|
|---|
| 40 | ; FLG_PDCSNR_UNKNOWN_BIT7 will be cleared if dev 1 is 7 !
|
|---|
| 41 | ; If dev 1 is 6 or less and dev 0 is 7, then dev0-- and set FLG_PDCSCR_UNKNOWN_BIT7
|
|---|
| 42 | ;
|
|---|
| 43 |
|
|---|
| 44 |
|
|---|
| 45 |
|
|---|
| [587] | 46 | ; LOW_CYLINDER_REGISTER in programming mode
|
|---|
| 47 | ; This is only on PDC 20630!
|
|---|
| 48 | FLG_PDCLCR_DEV0SPEED_BIT4 EQU (1<<7) ; Possibly speed bit 4 (speed settings 8 to 15)?
|
|---|
| 49 | FLG_PDCLCR_DEV1SPEED_BIT4 EQU (1<<6) ; Same as above but for device 1
|
|---|
| 50 | FLG_PDCLCR_DEV0IORDY EQU (1<<5) ; Not sure about this
|
|---|
| [622] | 51 | FLG_PDCLCR_DEV1IORDY EQU (1<<4) ; Same as above but for device 1
|
|---|
| [587] | 52 | FLG_PDCLCR_ENABLE_EXTRA_REGISTERS EQU (1<<3)
|
|---|
| 53 |
|
|---|
| 54 |
|
|---|
| 55 | ; PDC 20630 specific registers mapped after IDE registers
|
|---|
| 56 | PDC20630_INDEX_REGISTER EQU 8 ; 1F8h
|
|---|
| 57 | PDC20630_DATA_REGISTER EQU 9 ; 1F9h
|
|---|
| 58 |
|
|---|
| 59 | ; PDC 20630 registers to access through index and data register
|
|---|
| 60 | PDCREG0_TIMING_OF_DEV0_LOW EQU 0 ; Low, high, what timings?
|
|---|
| 61 | PDCREG1_TIMING_OF_DEV0_HIGH EQU 1
|
|---|
| 62 | PDCREG2_TIMING_OF_DEV1_LOW EQU 2
|
|---|
| 63 | PDCREG3_TIMING_OF_DEV1_HIGH EQU 3
|
|---|
| 64 | PDCREG7_STATUS EQU 7
|
|---|
| 65 |
|
|---|
| 66 | FLG_PDCSTATUS_DMA_ERROR EQU (1<<4) ; ?
|
|---|
| 67 | FLG_PDCSTATUS_DMA_READ_COMPLETED EQU (1<<1) ; ?
|
|---|
| 68 | FLG_PDCSTATUS_DMA_WRITE_COMPLETED EQU (1<<0) ; ?
|
|---|
| 69 |
|
|---|
| 70 |
|
|---|
| 71 | %endif ; PDC20x30_INC
|
|---|
