Changeset 567 in xtideuniversalbios for trunk/XTIDE_Universal_BIOS/Inc/ATA_ID.inc

Timestamp:

May 26, 2014, 1:25:15 PM (10 years ago)

Author:

krille_n_@…

google:author:

krille_n_@hotmail.com

Message:

Changes:

• Renamed MODULE_FEATURE_SETS to MODULE_POWER_MANAGEMENT.
• Renamed MODULE_VERY_LATE_INITIALIZATION to MODULE_VERY_LATE_INIT and removed it from the official builds.
• Removed the code that skips detection of slave drives on XT-CF controllers since slave drives can be used with Lo-tech ISA CompactFlash boards.
• Added autodetection of the SVC ADP50L controller to XTIDECFG.
• The autodetection of XT-CF controllers now requires MODULE_8BIT_IDE_ADVANCED in the loaded BIOS.
• Fixed a bug in XTIDECFG from r502 where the "Base (cmd block) address" menu option would be displayed when a serial device was selected as the IDE controller.
• XTIDECFG would display the "Enable interrupt" menu option for the XTIDE r1 but not for the XTIDE r2. It's now displayed for both controller types.
• Disabled the "Internal Write Cache" menu option in the Master/Slave Drive menus for serial device type drives.
• Optimizations and other fixes.

File:

• trunk/XTIDE_Universal_BIOS/Inc/ATA_ID.inc (modified) (6 diffs)

trunk/XTIDE_Universal_BIOS/Inc/ATA_ID.inc

@@ -86 +86 @@
     .strModel   resb 40 ; 27...46F, Model number (40 ASCII characters, 0000h=not specified)
     .bBlckSize  resb 1  ; 47[0-7]F, Maximum number of sectors that can be transferred
-                        ;          per interrupt on read and write multiple commands
-                        ;          (00h=Read/write multiple commands not implemented)
+                        ;           per interrupt on read and write multiple commands
+                        ;           (00h=Read/write multiple commands not implemented)
                 resb 1  ; 47[8-15]X
     .wDWIO      resw 1  ; 48F, Can perform doubleword I/O (boolean)
@@ -106 +106 @@
     ; Words 59-63 are always valid
     .bBlockSel  resb 1  ; 59[0-7]V, Current setting for number of sectors that
-                        ;           can be transferred per interrupt on R/W multiple command
+                        ;           can be transferred per interrupt on R/W multiple command
     .bBlockFlgs resb 1  ; 59[8-15]VR, bit 0 set if Multiple sector setting is valid
     .dwLBACnt   resd 1  ; 60...61F, Total number of user addressable sectors (LBA mode only)
@@ -168 +168 @@
     .strModel   resb 40 ; 27...46F, Model number (40 ASCII characters, 0000h=not specified)
     .bBlckSize  resb 1  ; 47[0-7]F, Maximum number of sectors that can be transferred
-                        ;          per interrupt on read and write multiple commands
-                        ;          (00h=Read/write multiple commands not implemented)
+                        ;           per interrupt on read and write multiple commands
+                        ;           (00h=Read/write multiple commands not implemented)
                 resb 1  ; 47[8-15]X
                 resw 1  ; 48R
@@ -188 +188 @@
     ; Words 59-63 are always valid
     .bBlockSel  resb 1  ; 59[0-7]V, Current setting for number of sectors that
-                        ;           can be transferred per interrupt on R/W multiple command
+                        ;           can be transferred per interrupt on R/W multiple command
     .bBlockFlgs resb 1  ; 59[8-15]VR, bit 0 set if Multiple sector setting is valid
     .dwLBACnt   resd 1  ; 60...61F, Total number of user addressable sectors (LBA mode only)
@@ -253 +253 @@
     .strModel   resb 40 ; 27...46F, Model number (40 ASCII characters, 0000h=not specified)
     .bBlckSize  resb 1  ; 47[0-7]F, Maximum number of sectors that can be transferred
-                        ;           per interrupt on read and write multiple commands
-                        ;           (00h=Read/write multiple commands not implemented)
+                        ;           per interrupt on read and write multiple commands
+                        ;           (00h=Read/write multiple commands not implemented)
                 resb 1  ; 47[8-15]F, 80h
                 resw 1  ; 48R
@@ -271 +271 @@
     ; Words 59-63 are always valid
     .bBlockSel  resb 1  ; 59[0-7]V, Current setting for number of sectors that
-                        ;           can be transferred per interrupt on R/W multiple command
+                        ;           can be transferred per interrupt on R/W multiple command
     .bBlockFlgs resb 1  ; 59[8-15]VR, bit 0 set if Multiple sector setting is valid
     .dwLBACnt   resd 1  ; 60...61F, Total number of user addressable sectors (LBA-28)