source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Main.asm @ 536

Last change on this file since 536 was 536, checked in by krille_n_@…, 11 years ago

Changes:

  • Added support for the Silicon Valley Computer ADP50L controller (and possibly other IDE controllers from SVC using memory mapped I/O). Please note that this has not been tested in any way since I don't have any of these cards myself (make backups before trying this on drives with important data). Also, *if* it works, make sure it works reliably (stress test the disk system). Some things you should know: 1) Autodetection for this controller has not been added to XTIDECFG, you need to manually select the "SVC ADP50L" controller (and possibly change the BIOS segment address if not using the default of C800h). 2) The memory mapped I/O window is inside the ROM address space of the controller. The XTIDE Universal BIOS currently do not support this so that means you need to use another ROM (for example, an XTIDE or XTCF card or the BOOT ROM of a NIC). This presents another problem, the original ADP50L BIOS needs to be disabled somehow to avoid conflicts. Either pull the ROM chip or disable the BIOS by removing jumper J3. Note, I have no idea if any of this will actually work. It's basically a shot in the dark.
File size: 12.9 KB
RevLine 
[3]1; Project name  :   XTIDE Universal BIOS
[86]2; Authors       :   Tomi Tilli
3;               :   aitotat@gmail.com
4;               :
[181]5;               :   Greg Lindhorst
6;               :   gregli@hotmail.com
7;               ;
[86]8;               :   Krister Nordvall
9;               :   krille_n_@hotmail.com
10;               :
[3]11; Description   :   Main file for BIOS. This is the only file that needs
12;                   to be compiled since other files are included to this
13;                   file (so no linker needed, Nasm does it all).
14
[376]15;
[380]16; XTIDE Universal BIOS and Associated Tools
[526]17; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
[376]18;
19; This program is free software; you can redistribute it and/or modify
20; it under the terms of the GNU General Public License as published by
21; the Free Software Foundation; either version 2 of the License, or
22; (at your option) any later version.
[380]23;
[376]24; This program is distributed in the hope that it will be useful,
25; but WITHOUT ANY WARRANTY; without even the implied warranty of
26; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
[380]27; GNU General Public License for more details.
[376]28; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
29;
30
[294]31    ORG 0                           ; Code start offset 0000h
[3]32
[379]33    ; We must define included libraries before including "AssemblyLibrary.inc".
34%define EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS   ; Exclude unused library functions
35%ifdef MODULE_BOOT_MENU
[392]36    %define MENUEVENT_INLINE_OFFSETS        ; Only one menu required, save space and inline offsets
[379]37    %define INCLUDE_MENU_LIBRARY
[492]38    %define MENU_NO_ESC                     ; User cannot 'esc' out of the menu
[379]39%else   ; If no boot menu included
40    %define INCLUDE_DISPLAY_LIBRARY
[392]41    %define INCLUDE_KEYBOARD_LIBRARY
[379]42    %define INCLUDE_TIME_LIBRARY
43%endif
44
45
[181]46    ; Included .inc files
47    %include "AssemblyLibrary.inc"  ; Assembly Library. Must be included first!
[522]48    %include "ModuleDependency.inc" ; Dependency checks for optional modules. Must be included second!
[358]49    %include "Version.inc"
[181]50    %include "ATA_ID.inc"           ; For ATA Drive Information structs
51    %include "IdeRegisters.inc"     ; For ATA Registers, flags and commands
52    %include "Int13h.inc"           ; Equates for INT 13h functions
53    %include "CustomDPT.inc"        ; For Disk Parameter Table
54    %include "RomVars.inc"          ; For ROMVARS and IDEVARS structs
55    %include "RamVars.inc"          ; For RAMVARS struct
[254]56    %include "BootVars.inc"         ; For BOOTVARS struct
[400]57    %include "IdeIO.inc"            ; Macros for IDE port I/O
[181]58    %include "DeviceIDE.inc"        ; For IDE device equates
[3]59
60
[397]61
[3]62; Section containing code
63SECTION .text
64
65; ROM variables (must start at offset 0)
[506]66CNT_ROM_BLOCKS      EQU     BIOS_SIZE / 512     ; number of 512B blocks, 16 = 8kB BIOS
[3]67istruc ROMVARS
68    at  ROMVARS.wRomSign,   dw  0AA55h          ; PC ROM signature
69    at  ROMVARS.bRomSize,   db  CNT_ROM_BLOCKS  ; ROM size in 512B blocks
[181]70    at  ROMVARS.rgbJump,    jmp Initialize_FromMainBiosRomSearch
[358]71    at  ROMVARS.rgbSign,    db  FLASH_SIGNATURE
72    at  ROMVARS.szTitle,    db  TITLE_STRING
73    at  ROMVARS.szVersion,  db  ROM_VERSION_STRING
[3]74
75;---------------------------;
76; AT Build default settings ;
77;---------------------------;
78%ifdef USE_AT
[397]79    at  ROMVARS.wFlags,         dw  FLG_ROMVARS_FULLMODE | MASK_ROMVARS_INCLUDED_MODULES
[143]80    at  ROMVARS.wDisplayMode,   dw  DEFAULT_TEXT_MODE
[397]81%ifdef MODULE_BOOT_MENU
[491]82    at  ROMVARS.wBootTimeout,   dw  BOOT_MENU_DEFAULT_TIMEOUT
[397]83%endif
[485]84    at  ROMVARS.bIdeCnt,        db  2                       ; Number of supported controllers
[3]85    at  ROMVARS.bBootDrv,       db  80h                     ; Boot Menu default drive
86    at  ROMVARS.bMinFddCnt,     db  0                       ; Do not force minimum number of floppy drives
87    at  ROMVARS.bStealSize,     db  1                       ; Steal 1kB from base memory
[380]88    at  ROMVARS.bIdleTimeout,   db  0                       ; Standby timer disabled by default
[3]89
[491]90    at  ROMVARS.ideVars0+IDEVARS.wBasePort,         dw  DEVICE_ATA_PRIMARY_PORT         ; Controller Command Block base port
91    at  ROMVARS.ideVars0+IDEVARS.wControlBlockPort, dw  DEVICE_ATA_PRIMARY_PORTCTRL     ; Controller Control Block base port
[473]92    at  ROMVARS.ideVars0+IDEVARS.bDevice,           db  DEVICE_16BIT_ATA
[524]93    at  ROMVARS.ideVars0+IDEVARS.bIRQ,              db  14
[422]94    at  ROMVARS.ideVars0+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
95    at  ROMVARS.ideVars0+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
[3]96
[485]97    at  ROMVARS.ideVars1+IDEVARS.wBasePort,         dw  DEVICE_ATA_SECONDARY_PORT
98    at  ROMVARS.ideVars1+IDEVARS.wControlBlockPort, dw  DEVICE_ATA_SECONDARY_PORTCTRL
99    at  ROMVARS.ideVars1+IDEVARS.bDevice,           db  DEVICE_16BIT_ATA
[524]100    at  ROMVARS.ideVars1+IDEVARS.bIRQ,              db  15
[422]101    at  ROMVARS.ideVars1+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
102    at  ROMVARS.ideVars1+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
[3]103
[485]104    at  ROMVARS.ideVars2+IDEVARS.wBasePort,         dw  DEVICE_ATA_TERTIARY_PORT
105    at  ROMVARS.ideVars2+IDEVARS.wControlBlockPort, dw  DEVICE_ATA_TERTIARY_PORTCTRL
106    at  ROMVARS.ideVars2+IDEVARS.bDevice,           db  DEVICE_16BIT_ATA
[473]107    at  ROMVARS.ideVars2+IDEVARS.bIRQ,              db  0
[422]108    at  ROMVARS.ideVars2+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
109    at  ROMVARS.ideVars2+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
[143]110
[473]111    at  ROMVARS.ideVars3+IDEVARS.wBasePort,         dw  DEVICE_ATA_QUATERNARY_PORT
112    at  ROMVARS.ideVars3+IDEVARS.wControlBlockPort, dw  DEVICE_ATA_QUATERNARY_PORTCTRL
113    at  ROMVARS.ideVars3+IDEVARS.bDevice,           db  DEVICE_16BIT_ATA
114    at  ROMVARS.ideVars3+IDEVARS.bIRQ,              db  0
[422]115    at  ROMVARS.ideVars3+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
116    at  ROMVARS.ideVars3+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
[175]117
118%ifdef MODULE_SERIAL
119    at  ROMVARS.ideVarsSerialAuto+IDEVARS.bDevice,      db  DEVICE_SERIAL_PORT
[181]120%endif
[3]121%else
122;-----------------------------------;
123; XT and XT+ Build default settings ;
124;-----------------------------------;
[397]125    at  ROMVARS.wFlags,         dw  MASK_ROMVARS_INCLUDED_MODULES
[143]126    at  ROMVARS.wDisplayMode,   dw  DEFAULT_TEXT_MODE
[397]127%ifdef MODULE_BOOT_MENU
[491]128    at  ROMVARS.wBootTimeout,   dw  BOOT_MENU_DEFAULT_TIMEOUT
[397]129%endif
[526]130%ifdef MODULE_8BIT_IDE_ADVANCED
[473]131    at  ROMVARS.bIdeCnt,        db  2                       ; Number of supported controllers
[493]132%else
133    at  ROMVARS.bIdeCnt,        db  1
134%endif
[3]135    at  ROMVARS.bBootDrv,       db  80h                     ; Boot Menu default drive
[461]136    at  ROMVARS.bMinFddCnt,     db  0                       ; Do not force minimum number of floppy drives
[3]137    at  ROMVARS.bStealSize,     db  1                       ; Steal 1kB from base memory in full mode
[380]138    at  ROMVARS.bIdleTimeout,   db  0                       ; Standby timer disabled by default
[3]139
[473]140    at  ROMVARS.ideVars0+IDEVARS.wBasePort,         dw  DEVICE_XTIDE_DEFAULT_PORT           ; Controller Command Block base port
141    at  ROMVARS.ideVars0+IDEVARS.wControlBlockPort, dw  DEVICE_XTIDE_DEFAULT_PORTCTRL       ; Controller Control Block base port
142    at  ROMVARS.ideVars0+IDEVARS.bDevice,           db  DEVICE_8BIT_XTIDE_REV1
[447]143    at  ROMVARS.ideVars0+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
144    at  ROMVARS.ideVars0+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
[143]145
[493]146%ifdef MODULE_8BIT_IDE_ADVANCED
[485]147    at  ROMVARS.ideVars1+IDEVARS.bXTCFcontrolRegister,  db  XTCF_8BIT_PIO_MODE
[473]148    at  ROMVARS.ideVars1+IDEVARS.bDevice,               db  DEVICE_8BIT_XTCF_PIO8
[536]149%endif
150
[447]151    at  ROMVARS.ideVars1+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
152    at  ROMVARS.ideVars1+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
[143]153
[447]154    at  ROMVARS.ideVars2+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
155    at  ROMVARS.ideVars2+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
[143]156
[447]157    at  ROMVARS.ideVars3+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
158    at  ROMVARS.ideVars3+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
[175]159
160%ifdef MODULE_SERIAL
161    at  ROMVARS.ideVarsSerialAuto+IDEVARS.bDevice,      db  DEVICE_SERIAL_PORT
[3]162%endif
[181]163%endif
[3]164iend
165
[380]166    ; Strings are first to avoid them moving unnecessarily when code is turned on and off with %ifdef's
[334]167    ; since some groups of strings need to be on the same 256-byte page.
168    ;
169%ifdef MODULE_STRINGS_COMPRESSED
170    %define STRINGSCOMPRESSED_STRINGS
[380]171    %include "StringsCompressed.asm"
[334]172%else
173    %include "Strings.asm"          ; For BIOS message strings
174%endif
175
[248]176    ; Libraries, data, Initialization and drive detection
[334]177
[181]178    %include "AssemblyLibrary.asm"
[334]179
180    ; String compression tables need to come after the AssemblyLibrary (since they depend on addresses
[380]181    ; established in the assembly library), and are unnecessary if strings are not compressed.
[334]182    ;
183%ifdef MODULE_STRINGS_COMPRESSED
[380]184    %undef  STRINGSCOMPRESSED_STRINGS
[334]185    %define STRINGSCOMPRESSED_TABLES
186    %include "StringsCompressed.asm"
187%endif
[380]188
[248]189    %include "Initialize.asm"       ; For BIOS initialization
190    %include "Interrupts.asm"       ; For Interrupt initialization
191    %include "RamVars.asm"          ; For RAMVARS initialization and access
[399]192    %include "BootVars.asm"         ; For initializing variables used during init and boot
[392]193    %include "FloppyDrive.asm"      ; Floppy Drive related functions
[285]194    %include "CreateDPT.asm"        ; For creating DPTs
195    %include "FindDPT.asm"          ; For finding DPTs
[181]196    %include "AccessDPT.asm"        ; For accessing DPTs
[421]197    %include "AtaGeometry.asm"      ; For generating L-CHS parameters
[397]198    %include "DrvDetectInfo.asm"    ; For creating DRVDETECTINFO structs
[181]199    %include "AtaID.asm"            ; For ATA Identify Device information
200    %include "DetectDrives.asm"     ; For detecting IDE drives
201    %include "DetectPrint.asm"      ; For printing drive detection strings
[395]202
203    ; Hotkey Bar
204%ifdef MODULE_HOTKEYS
[392]205    %include "HotkeyBar.asm"        ; For hotkeys during drive detection and boot menu
[526]206%endif
[492]207%ifdef MODULE_DRIVEXLATE
208    %include "DriveXlate.asm"       ; For swapping drive numbers, must come immediately after HotkeyBar.asm
[395]209%endif
[248]210
[181]211    ; Boot menu
[379]212%ifdef MODULE_BOOT_MENU
[181]213    %include "BootMenu.asm"         ; For Boot Menu operations
214    %include "BootMenuEvent.asm"    ; For menu library event handling
[192]215                                    ; NOTE: BootMenuPrint needs to come immediately after BootMenuEvent
[258]216                                    ;       so that jump table entries in BootMenuEvent stay within 8-bits
217    %include "BootMenuPrint.asm"    ; For printing Boot Menu strings, also includes "BootMenuPrintCfg.asm"
[379]218%endif
219
220    ; Boot loader
221    %include "Int19h.asm"           ; For Int 19h, Boot Loader
[492]222    %include "BootSector.asm"       ; For loading boot sector
[392]223    %include "Int19hReset.asm"      ; INT 19h handler for proper system reset
[3]224
[181]225    ; For all device types
[192]226    %include "Idepack.asm"
[181]227    %include "Device.asm"
228    %include "Timer.asm"            ; For timeout and delay
[155]229
[181]230    ; IDE Device support
[363]231%ifdef MODULE_ADVANCED_ATA
232    %include "AdvAtaInit.asm"       ; For initializing VLB and PCI controllers
233    %include "Vision.asm"           ; QDI Vision QD6500 and QD6580 support
234%endif
[181]235    %include "IdeCommand.asm"
[493]236%ifdef MODULE_8BIT_IDE_ADVANCED
[400]237    %include "JrIdeTransfer.asm"    ; Must be included after IdeCommand.asm
[480]238    %include "IdeDmaBlock.asm"
[400]239%endif
240    %include "IdeTransfer.asm"
[473]241    %include "IdePioBlock.asm"
[192]242    %include "IdeWait.asm"
[294]243    %include "IdeError.asm"         ; Must be included after IdeWait.asm
[181]244    %include "IdeDPT.asm"
245    %include "IdeIO.asm"
[398]246%ifdef MODULE_IRQ
[181]247    %include "IdeIrq.asm"
[398]248%endif
[155]249
[400]250    ; Serial Device support
[181]251%ifdef MODULE_SERIAL                ; Serial Port Device support
252    %include "SerialCommand.asm"
253    %include "SerialDPT.asm"
[175]254%endif
[155]255
[181]256    ; INT 13h Hard Disk BIOS functions
257    %include "Int13h.asm"           ; For Int 13h, Disk functions
[529]258    %include "AH0h_HReset.asm"
259    %include "AH1h_HStatus.asm"
260    %include "AH2h_HRead.asm"
261    %include "AH3h_HWrite.asm"
262    %include "AH4h_HVerify.asm"
263    %include "AH8h_HParams.asm"
264    %include "AH9h_HInit.asm"
265    %include "AHCh_HSeek.asm"
266    %include "AH10h_HReady.asm"
267    %include "AH11h_HRecal.asm"
268    %include "AH15h_HSize.asm"
[493]269%ifdef MODULE_8BIT_IDE_ADVANCED
[471]270    %include "AH1Eh_XTCF.asm"
271%endif
[529]272    %include "AH23h_HFeatures.asm"
273    %include "AH24h_HSetBlocks.asm"
274    %include "AH25h_HDrvID.asm"
[221]275    %include "Address.asm"          ; For sector address translations
276    %include "Prepare.asm"          ; For buffer pointer normalization
[176]277%ifdef MODULE_EBIOS
[181]278    %include "AH42h_ExtendedReadSectors.asm"
279    %include "AH43h_ExtendedWriteSectors.asm"
280    %include "AH44h_ExtendedVerifySectors.asm"
281    %include "AH47h_ExtendedSeek.asm"
282    %include "AH48h_GetExtendedDriveParameters.asm"
[221]283    %include "AH41h_CheckIfExtensionsPresent.asm"
[176]284%endif
Note: See TracBrowser for help on using the repository browser.