source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Main.asm @ 536

Last change on this file since 536 was 536, checked in by krille_n_@…, 11 years ago

Changes:

  • Added support for the Silicon Valley Computer ADP50L controller (and possibly other IDE controllers from SVC using memory mapped I/O). Please note that this has not been tested in any way since I don't have any of these cards myself (make backups before trying this on drives with important data). Also, *if* it works, make sure it works reliably (stress test the disk system). Some things you should know: 1) Autodetection for this controller has not been added to XTIDECFG, you need to manually select the "SVC ADP50L" controller (and possibly change the BIOS segment address if not using the default of C800h). 2) The memory mapped I/O window is inside the ROM address space of the controller. The XTIDE Universal BIOS currently do not support this so that means you need to use another ROM (for example, an XTIDE or XTCF card or the BOOT ROM of a NIC). This presents another problem, the original ADP50L BIOS needs to be disabled somehow to avoid conflicts. Either pull the ROM chip or disable the BIOS by removing jumper J3. Note, I have no idea if any of this will actually work. It's basically a shot in the dark.
File size: 12.9 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Authors       :   Tomi Tilli
3;               :   aitotat@gmail.com
4;               :
5;               :   Greg Lindhorst
6;               :   gregli@hotmail.com
7;               ;
8;               :   Krister Nordvall
9;               :   krille_n_@hotmail.com
10;               :
11; Description   :   Main file for BIOS. This is the only file that needs
12;                   to be compiled since other files are included to this
13;                   file (so no linker needed, Nasm does it all).
14
15;
16; XTIDE Universal BIOS and Associated Tools
17; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
18;
19; This program is free software; you can redistribute it and/or modify
20; it under the terms of the GNU General Public License as published by
21; the Free Software Foundation; either version 2 of the License, or
22; (at your option) any later version.
23;
24; This program is distributed in the hope that it will be useful,
25; but WITHOUT ANY WARRANTY; without even the implied warranty of
26; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
27; GNU General Public License for more details.
28; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
29;
30
31    ORG 0                           ; Code start offset 0000h
32
33    ; We must define included libraries before including "AssemblyLibrary.inc".
34%define EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS   ; Exclude unused library functions
35%ifdef MODULE_BOOT_MENU
36    %define MENUEVENT_INLINE_OFFSETS        ; Only one menu required, save space and inline offsets
37    %define INCLUDE_MENU_LIBRARY
38    %define MENU_NO_ESC                     ; User cannot 'esc' out of the menu
39%else   ; If no boot menu included
40    %define INCLUDE_DISPLAY_LIBRARY
41    %define INCLUDE_KEYBOARD_LIBRARY
42    %define INCLUDE_TIME_LIBRARY
43%endif
44
45
46    ; Included .inc files
47    %include "AssemblyLibrary.inc"  ; Assembly Library. Must be included first!
48    %include "ModuleDependency.inc" ; Dependency checks for optional modules. Must be included second!
49    %include "Version.inc"
50    %include "ATA_ID.inc"           ; For ATA Drive Information structs
51    %include "IdeRegisters.inc"     ; For ATA Registers, flags and commands
52    %include "Int13h.inc"           ; Equates for INT 13h functions
53    %include "CustomDPT.inc"        ; For Disk Parameter Table
54    %include "RomVars.inc"          ; For ROMVARS and IDEVARS structs
55    %include "RamVars.inc"          ; For RAMVARS struct
56    %include "BootVars.inc"         ; For BOOTVARS struct
57    %include "IdeIO.inc"            ; Macros for IDE port I/O
58    %include "DeviceIDE.inc"        ; For IDE device equates
59
60
61
62; Section containing code
63SECTION .text
64
65; ROM variables (must start at offset 0)
66CNT_ROM_BLOCKS      EQU     BIOS_SIZE / 512     ; number of 512B blocks, 16 = 8kB BIOS
67istruc ROMVARS
68    at  ROMVARS.wRomSign,   dw  0AA55h          ; PC ROM signature
69    at  ROMVARS.bRomSize,   db  CNT_ROM_BLOCKS  ; ROM size in 512B blocks
70    at  ROMVARS.rgbJump,    jmp Initialize_FromMainBiosRomSearch
71    at  ROMVARS.rgbSign,    db  FLASH_SIGNATURE
72    at  ROMVARS.szTitle,    db  TITLE_STRING
73    at  ROMVARS.szVersion,  db  ROM_VERSION_STRING
74
75;---------------------------;
76; AT Build default settings ;
77;---------------------------;
78%ifdef USE_AT
79    at  ROMVARS.wFlags,         dw  FLG_ROMVARS_FULLMODE | MASK_ROMVARS_INCLUDED_MODULES
80    at  ROMVARS.wDisplayMode,   dw  DEFAULT_TEXT_MODE
81%ifdef MODULE_BOOT_MENU
82    at  ROMVARS.wBootTimeout,   dw  BOOT_MENU_DEFAULT_TIMEOUT
83%endif
84    at  ROMVARS.bIdeCnt,        db  2                       ; Number of supported controllers
85    at  ROMVARS.bBootDrv,       db  80h                     ; Boot Menu default drive
86    at  ROMVARS.bMinFddCnt,     db  0                       ; Do not force minimum number of floppy drives
87    at  ROMVARS.bStealSize,     db  1                       ; Steal 1kB from base memory
88    at  ROMVARS.bIdleTimeout,   db  0                       ; Standby timer disabled by default
89
90    at  ROMVARS.ideVars0+IDEVARS.wBasePort,         dw  DEVICE_ATA_PRIMARY_PORT         ; Controller Command Block base port
91    at  ROMVARS.ideVars0+IDEVARS.wControlBlockPort, dw  DEVICE_ATA_PRIMARY_PORTCTRL     ; Controller Control Block base port
92    at  ROMVARS.ideVars0+IDEVARS.bDevice,           db  DEVICE_16BIT_ATA
93    at  ROMVARS.ideVars0+IDEVARS.bIRQ,              db  14
94    at  ROMVARS.ideVars0+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
95    at  ROMVARS.ideVars0+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
96
97    at  ROMVARS.ideVars1+IDEVARS.wBasePort,         dw  DEVICE_ATA_SECONDARY_PORT
98    at  ROMVARS.ideVars1+IDEVARS.wControlBlockPort, dw  DEVICE_ATA_SECONDARY_PORTCTRL
99    at  ROMVARS.ideVars1+IDEVARS.bDevice,           db  DEVICE_16BIT_ATA
100    at  ROMVARS.ideVars1+IDEVARS.bIRQ,              db  15
101    at  ROMVARS.ideVars1+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
102    at  ROMVARS.ideVars1+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
103
104    at  ROMVARS.ideVars2+IDEVARS.wBasePort,         dw  DEVICE_ATA_TERTIARY_PORT
105    at  ROMVARS.ideVars2+IDEVARS.wControlBlockPort, dw  DEVICE_ATA_TERTIARY_PORTCTRL
106    at  ROMVARS.ideVars2+IDEVARS.bDevice,           db  DEVICE_16BIT_ATA
107    at  ROMVARS.ideVars2+IDEVARS.bIRQ,              db  0
108    at  ROMVARS.ideVars2+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
109    at  ROMVARS.ideVars2+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
110
111    at  ROMVARS.ideVars3+IDEVARS.wBasePort,         dw  DEVICE_ATA_QUATERNARY_PORT
112    at  ROMVARS.ideVars3+IDEVARS.wControlBlockPort, dw  DEVICE_ATA_QUATERNARY_PORTCTRL
113    at  ROMVARS.ideVars3+IDEVARS.bDevice,           db  DEVICE_16BIT_ATA
114    at  ROMVARS.ideVars3+IDEVARS.bIRQ,              db  0
115    at  ROMVARS.ideVars3+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
116    at  ROMVARS.ideVars3+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   dw  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
117
118%ifdef MODULE_SERIAL
119    at  ROMVARS.ideVarsSerialAuto+IDEVARS.bDevice,      db  DEVICE_SERIAL_PORT
120%endif
121%else
122;-----------------------------------;
123; XT and XT+ Build default settings ;
124;-----------------------------------;
125    at  ROMVARS.wFlags,         dw  MASK_ROMVARS_INCLUDED_MODULES
126    at  ROMVARS.wDisplayMode,   dw  DEFAULT_TEXT_MODE
127%ifdef MODULE_BOOT_MENU
128    at  ROMVARS.wBootTimeout,   dw  BOOT_MENU_DEFAULT_TIMEOUT
129%endif
130%ifdef MODULE_8BIT_IDE_ADVANCED
131    at  ROMVARS.bIdeCnt,        db  2                       ; Number of supported controllers
132%else
133    at  ROMVARS.bIdeCnt,        db  1
134%endif
135    at  ROMVARS.bBootDrv,       db  80h                     ; Boot Menu default drive
136    at  ROMVARS.bMinFddCnt,     db  0                       ; Do not force minimum number of floppy drives
137    at  ROMVARS.bStealSize,     db  1                       ; Steal 1kB from base memory in full mode
138    at  ROMVARS.bIdleTimeout,   db  0                       ; Standby timer disabled by default
139
140    at  ROMVARS.ideVars0+IDEVARS.wBasePort,         dw  DEVICE_XTIDE_DEFAULT_PORT           ; Controller Command Block base port
141    at  ROMVARS.ideVars0+IDEVARS.wControlBlockPort, dw  DEVICE_XTIDE_DEFAULT_PORTCTRL       ; Controller Control Block base port
142    at  ROMVARS.ideVars0+IDEVARS.bDevice,           db  DEVICE_8BIT_XTIDE_REV1
143    at  ROMVARS.ideVars0+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
144    at  ROMVARS.ideVars0+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
145
146%ifdef MODULE_8BIT_IDE_ADVANCED
147    at  ROMVARS.ideVars1+IDEVARS.bXTCFcontrolRegister,  db  XTCF_8BIT_PIO_MODE
148    at  ROMVARS.ideVars1+IDEVARS.bDevice,               db  DEVICE_8BIT_XTCF_PIO8
149%endif
150
151    at  ROMVARS.ideVars1+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
152    at  ROMVARS.ideVars1+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
153
154    at  ROMVARS.ideVars2+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
155    at  ROMVARS.ideVars2+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
156
157    at  ROMVARS.ideVars3+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags,  db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
158    at  ROMVARS.ideVars3+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags,   db  DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE | (TRANSLATEMODE_AUTO<<TRANSLATEMODE_FIELD_POSITION)
159
160%ifdef MODULE_SERIAL
161    at  ROMVARS.ideVarsSerialAuto+IDEVARS.bDevice,      db  DEVICE_SERIAL_PORT
162%endif
163%endif
164iend
165
166    ; Strings are first to avoid them moving unnecessarily when code is turned on and off with %ifdef's
167    ; since some groups of strings need to be on the same 256-byte page.
168    ;
169%ifdef MODULE_STRINGS_COMPRESSED
170    %define STRINGSCOMPRESSED_STRINGS
171    %include "StringsCompressed.asm"
172%else
173    %include "Strings.asm"          ; For BIOS message strings
174%endif
175
176    ; Libraries, data, Initialization and drive detection
177
178    %include "AssemblyLibrary.asm"
179
180    ; String compression tables need to come after the AssemblyLibrary (since they depend on addresses
181    ; established in the assembly library), and are unnecessary if strings are not compressed.
182    ;
183%ifdef MODULE_STRINGS_COMPRESSED
184    %undef  STRINGSCOMPRESSED_STRINGS
185    %define STRINGSCOMPRESSED_TABLES
186    %include "StringsCompressed.asm"
187%endif
188
189    %include "Initialize.asm"       ; For BIOS initialization
190    %include "Interrupts.asm"       ; For Interrupt initialization
191    %include "RamVars.asm"          ; For RAMVARS initialization and access
192    %include "BootVars.asm"         ; For initializing variables used during init and boot
193    %include "FloppyDrive.asm"      ; Floppy Drive related functions
194    %include "CreateDPT.asm"        ; For creating DPTs
195    %include "FindDPT.asm"          ; For finding DPTs
196    %include "AccessDPT.asm"        ; For accessing DPTs
197    %include "AtaGeometry.asm"      ; For generating L-CHS parameters
198    %include "DrvDetectInfo.asm"    ; For creating DRVDETECTINFO structs
199    %include "AtaID.asm"            ; For ATA Identify Device information
200    %include "DetectDrives.asm"     ; For detecting IDE drives
201    %include "DetectPrint.asm"      ; For printing drive detection strings
202
203    ; Hotkey Bar
204%ifdef MODULE_HOTKEYS
205    %include "HotkeyBar.asm"        ; For hotkeys during drive detection and boot menu
206%endif
207%ifdef MODULE_DRIVEXLATE
208    %include "DriveXlate.asm"       ; For swapping drive numbers, must come immediately after HotkeyBar.asm
209%endif
210
211    ; Boot menu
212%ifdef MODULE_BOOT_MENU
213    %include "BootMenu.asm"         ; For Boot Menu operations
214    %include "BootMenuEvent.asm"    ; For menu library event handling
215                                    ; NOTE: BootMenuPrint needs to come immediately after BootMenuEvent
216                                    ;       so that jump table entries in BootMenuEvent stay within 8-bits
217    %include "BootMenuPrint.asm"    ; For printing Boot Menu strings, also includes "BootMenuPrintCfg.asm"
218%endif
219
220    ; Boot loader
221    %include "Int19h.asm"           ; For Int 19h, Boot Loader
222    %include "BootSector.asm"       ; For loading boot sector
223    %include "Int19hReset.asm"      ; INT 19h handler for proper system reset
224
225    ; For all device types
226    %include "Idepack.asm"
227    %include "Device.asm"
228    %include "Timer.asm"            ; For timeout and delay
229
230    ; IDE Device support
231%ifdef MODULE_ADVANCED_ATA
232    %include "AdvAtaInit.asm"       ; For initializing VLB and PCI controllers
233    %include "Vision.asm"           ; QDI Vision QD6500 and QD6580 support
234%endif
235    %include "IdeCommand.asm"
236%ifdef MODULE_8BIT_IDE_ADVANCED
237    %include "JrIdeTransfer.asm"    ; Must be included after IdeCommand.asm
238    %include "IdeDmaBlock.asm"
239%endif
240    %include "IdeTransfer.asm"
241    %include "IdePioBlock.asm"
242    %include "IdeWait.asm"
243    %include "IdeError.asm"         ; Must be included after IdeWait.asm
244    %include "IdeDPT.asm"
245    %include "IdeIO.asm"
246%ifdef MODULE_IRQ
247    %include "IdeIrq.asm"
248%endif
249
250    ; Serial Device support
251%ifdef MODULE_SERIAL                ; Serial Port Device support
252    %include "SerialCommand.asm"
253    %include "SerialDPT.asm"
254%endif
255
256    ; INT 13h Hard Disk BIOS functions
257    %include "Int13h.asm"           ; For Int 13h, Disk functions
258    %include "AH0h_HReset.asm"
259    %include "AH1h_HStatus.asm"
260    %include "AH2h_HRead.asm"
261    %include "AH3h_HWrite.asm"
262    %include "AH4h_HVerify.asm"
263    %include "AH8h_HParams.asm"
264    %include "AH9h_HInit.asm"
265    %include "AHCh_HSeek.asm"
266    %include "AH10h_HReady.asm"
267    %include "AH11h_HRecal.asm"
268    %include "AH15h_HSize.asm"
269%ifdef MODULE_8BIT_IDE_ADVANCED
270    %include "AH1Eh_XTCF.asm"
271%endif
272    %include "AH23h_HFeatures.asm"
273    %include "AH24h_HSetBlocks.asm"
274    %include "AH25h_HDrvID.asm"
275    %include "Address.asm"          ; For sector address translations
276    %include "Prepare.asm"          ; For buffer pointer normalization
277%ifdef MODULE_EBIOS
278    %include "AH42h_ExtendedReadSectors.asm"
279    %include "AH43h_ExtendedWriteSectors.asm"
280    %include "AH44h_ExtendedVerifySectors.asm"
281    %include "AH47h_ExtendedSeek.asm"
282    %include "AH48h_GetExtendedDriveParameters.asm"
283    %include "AH41h_CheckIfExtensionsPresent.asm"
284%endif
Note: See TracBrowser for help on using the repository browser.