source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Inc/RomVars.inc

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @392   13 years Tomi Tilli Changes to XTIDE Universal BIOS: * Greatly improved Hotkey Bar is …
(edit) @380   13 years Krister Nordvall Changes: * Added code to XTIDECFG for Power Management (standby …
(edit) @376   13 years Greg Lindhorst WIDE checkin... Added copyright and license information to sorce …
(edit) @363   13 years Tomi Tilli Changes to XTIDE Universal BIOS: * Added Advanced ATA Module …
(edit) @361   13 years Tomi Tilli Changes to XTIDE Universal BIOS: * Added untested support for Fast …
(edit) @322   13 years Krister Nordvall Changes to XTIDE Universal BIOS: * Commented out the FS and GS …
(edit) @316   13 years Greg Lindhorst Fixed a bug with ah0h/reset of a serial drive that was found during …
(edit) @277   13 years Greg Lindhorst Moved the bulk of the serial code to the assembly library, for …
(edit) @276   13 years Tomi Tilli Changes to XTIDE Universal BIOS: * Changed version number to 2.0.0 * …
(edit) @261   13 years Greg Lindhorst Basic maintenance to enable the unused code check to work again, no …
(edit) @244   13 years Greg Lindhorst Removed tiny optimization for DEVICE_SERIAL being the last device type …
(edit) @243   13 years Tomi Tilli Changes to XTIDE Universal BIOS: * Brought back optional "A then C" …
(edit) @242   13 years Krister Nordvall Changes: * Optimizations (both for size and speed) in IdeTransfer.asm …
(edit) @238   13 years Tomi Tilli Changes to XTIDE Universal BIOS: * Makefile now builds small (8k) and …
(edit) @233   13 years Greg Lindhorst Serial Port: split single byte port and baud into two bytes, taking …
(edit) @227   13 years Tomi Tilli Changes to XTIDE Universal BIOS: * EBIOS functions now work in lite mode.
(edit) @203   13 years Greg Lindhorst Reworked the 'skip detecting the slave if there was no master' code to …
(edit) @200   13 years Greg Lindhorst Added logic to skip scanning COM ports if a COM port was already found …
(edit) @199   13 years Greg Lindhorst Adding proper serial port support to the Configurator, which required …
(edit) @196   13 years Greg Lindhorst Added printing of COM port and baud rate, when set explicitly by …
(edit) @181   13 years Krister Nordvall Changes to all parts of the project: * Size optimizations. * Added …
(edit) @179   13 years Greg Lindhorst Main checkin, adding virtual IDE drive over serial port connection
(edit) @178   13 years Krister Nordvall * Removed an %ifdef in RomVars.inc that prevented XTIDECFG from …
(edit) @176   13 years Greg Lindhorst Made a module around the EBIOS code, so that it can be turned off to …
(edit) @175   13 years Greg Lindhorst ifdef of existing serial code, in preperation for checkin
(edit) @150   14 years Tomi Tilli Changes to XTIDE Universal BIOS: * Redesigned Disk Parameter Tables. …
(edit) @143   14 years Tomi Tilli Changes to XTIDE Universal BIOS: * Removed "Boot sector found!" …
(edit) @137   14 years Tomi Tilli Changes to XTIDE Universal BIOS: * Menu selection timeout is now …
(edit) @99   14 years Tomi Tilli Changes to XTIDE Universal BIOS: * Even more initialization code …
(edit) @97   14 years Tomi Tilli Changes to XTIDE Universal BIOS: * Inlined some initialization …
(edit) @93   14 years Tomi Tilli Changes to XTIDE Universal BIOS: * Diagnostic cylinder can no longer …
(edit) @92   14 years Tomi Tilli Changes to XTIDE Universal BIOS: * Removed ROM Boot from boot menu …
(edit) @90   14 years Tomi Tilli Changes to XTIDE Universal BIOS: * Removed INT 13h format and …
(edit) @88   14 years Tomi Tilli Changes to XTIDE Universal BIOS: * Now uses new libraries (untested) …
(add) @3   15 years Tomi Tilli
Note: See TracRevisionLog for help on using the revision log.