|
|
@316
|
13 years |
Greg Lindhorst |
Fixed a bug with ah0h/reset of a serial drive that was found during …
|
|
|
@277
|
13 years |
Greg Lindhorst |
Moved the bulk of the serial code to the assembly library, for …
|
|
|
@276
|
13 years |
Tomi Tilli |
Changes to XTIDE Universal BIOS:
* Changed version number to 2.0.0
* …
|
|
|
@261
|
13 years |
Greg Lindhorst |
Basic maintenance to enable the unused code check to work again, no …
|
|
|
@244
|
13 years |
Greg Lindhorst |
Removed tiny optimization for DEVICE_SERIAL being the last device type …
|
|
|
@243
|
13 years |
Tomi Tilli |
Changes to XTIDE Universal BIOS:
* Brought back optional "A then C" …
|
|
|
@242
|
13 years |
Krister Nordvall |
Changes:
* Optimizations (both for size and speed) in IdeTransfer.asm …
|
|
|
@238
|
13 years |
Tomi Tilli |
Changes to XTIDE Universal BIOS:
* Makefile now builds small (8k) and …
|
|
|
@233
|
13 years |
Greg Lindhorst |
Serial Port: split single byte port and baud into two bytes, taking …
|
|
|
@227
|
13 years |
Tomi Tilli |
Changes to XTIDE Universal BIOS:
* EBIOS functions now work in lite mode.
|
|
|
@203
|
13 years |
Greg Lindhorst |
Reworked the 'skip detecting the slave if there was no master' code to …
|
|
|
@200
|
13 years |
Greg Lindhorst |
Added logic to skip scanning COM ports if a COM port was already found …
|
|
|
@199
|
13 years |
Greg Lindhorst |
Adding proper serial port support to the Configurator, which required …
|
|
|
@196
|
13 years |
Greg Lindhorst |
Added printing of COM port and baud rate, when set explicitly by …
|
|
|
@181
|
13 years |
Krister Nordvall |
Changes to all parts of the project:
* Size optimizations.
* Added …
|
|
|
@179
|
13 years |
Greg Lindhorst |
Main checkin, adding virtual IDE drive over serial port connection
|
|
|
@178
|
13 years |
Krister Nordvall |
* Removed an %ifdef in RomVars.inc that prevented XTIDECFG from …
|
|
|
@176
|
13 years |
Greg Lindhorst |
Made a module around the EBIOS code, so that it can be turned off to …
|
|
|
@175
|
13 years |
Greg Lindhorst |
ifdef of existing serial code, in preperation for checkin
|
|
|
@150
|
14 years |
Tomi Tilli |
Changes to XTIDE Universal BIOS:
* Redesigned Disk Parameter Tables. …
|
|
|
@143
|
14 years |
Tomi Tilli |
Changes to XTIDE Universal BIOS:
* Removed "Boot sector found!" …
|
|
|
@137
|
14 years |
Tomi Tilli |
Changes to XTIDE Universal BIOS:
* Menu selection timeout is now …
|
|
|
@99
|
14 years |
Tomi Tilli |
Changes to XTIDE Universal BIOS:
* Even more initialization code …
|
|
|
@97
|
14 years |
Tomi Tilli |
Changes to XTIDE Universal BIOS:
* Inlined some initialization …
|
|
|
@93
|
14 years |
Tomi Tilli |
Changes to XTIDE Universal BIOS:
* Diagnostic cylinder can no longer …
|
|
|
@92
|
14 years |
Tomi Tilli |
Changes to XTIDE Universal BIOS:
* Removed ROM Boot from boot menu …
|
|
|
@90
|
14 years |
Tomi Tilli |
Changes to XTIDE Universal BIOS:
* Removed INT 13h format and …
|
|
|
@88
|
14 years |
Tomi Tilli |
Changes to XTIDE Universal BIOS:
* Now uses new libraries (untested) …
|
|
|
@3
|
14 years |
Tomi Tilli |
|