Changeset 614 in xtideuniversalbios for trunk/XTIDE_Universal_BIOS/Src/Initialization

Timestamp:

Jun 10, 2021, 4:56:34 PM (3 years ago)

Author:

Krister Nordvall

Message:

Changes:

• BIOSDRVS should now build again (broke in r613).
• Removed the NO_ATAID_CORRECTION define from the Tiny build.
• Added a new configuration option to skip detection of slave drives.
• Made FLASH_SIGNATURE 2 bytes shorter to free up ROM space.
• "Auto Configure" in XTIDECFG should now detect if running on an Olivetti M24, AT&T PC6300, Xerox 6060 or Logabax Persona 1600 and automatically select the fastest compatible transfer mode/device type for any IDE controllers found in the system.
• Cleaned out some duplicate/unused definitions.

Location:

trunk/XTIDE_Universal_BIOS/Src/Initialization

Files:

• AtaID.asm (modified) (3 diffs)
• DetectDrives.asm (modified) (1 diff)

trunk/XTIDE_Universal_BIOS/Src/Initialization/AtaID.asm

@@ -35 +35 @@
 ;       ES:SI:  Ata information with possible corrections made
 ;       AH:     INT 13h Error Code from reading ATA information
-;       CF      cleared if drive now accepted
+;       CF      Cleared if drive now accepted
 ;   Corrupts registers:
 ;       AL, BX, CX, DX, DI
@@ -49 +49 @@
 
     ; Only correct cylinders since there are no reports that head or sectors could be wrong
-    MIN_U   WORD [es:si+ATA1.wCylCnt], MAX_VALID_PCHS_CYLINDERS     ; Limit to max allowed value
-    
+    MIN_U   WORD [es:si+ATA1.wCylCnt], MAX_PCHS_CYLINDERS       ; Limit to max allowed value
+
     ; Note! There are ATA ID words 54-58 that also need to be modified! However,
     ; the drive itself should modify them when we do Initialize Device Parameters command at AH=9h.
     ; Verification from real drive needed before we fix them manually
-    
+
     clc                     ; Return success
 .Return:
@@ -82 +82 @@
     ; Verify P-CHS cylinders
     mov     bx, ATA1.wCylCnt
-    mov     ax, MAX_VALID_PCHS_CYLINDERS
+    mov     ax, MAX_PCHS_CYLINDERS
     call    .CompareCHorSfromOffsetBXtoMaxValueInAX
 
     mov     bl, ATA1.wHeadCnt & 0FFh
-    mov     ax, MAX_VALID_PCHS_HEADS
+    mov     ax, MAX_PCHS_HEADS
     call    .CompareCHorSfromOffsetBXtoMaxValueInAX
 
     mov     bl, ATA1.wSPT & 0FFh
-    mov     al, MAX_VALID_PCHS_SECTORS_PER_TRACK
+    mov     al, MAX_PCHS_SECTORS_PER_TRACK
     call    .CompareCHorSfromOffsetBXtoMaxValueInAX
 

trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectDrives.asm

@@ -44 +44 @@
     call    StartDetectionWithDriveSelectByteInBHandStringInCX  ; Detect and create DPT + BOOTNFO
 
+    test    BYTE [cs:bp+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags], FLG_DRVPARAMS_DO_NOT_DETECT
+    jnz     SHORT .SkipSlaveDetection
     mov     cx, g_szDetectSlave
     mov     bh, MASK_DRVNHEAD_SET | FLG_DRVNHEAD_DRV
     call    StartDetectionWithDriveSelectByteInBHandStringInCX
+.SkipSlaveDetection:
 
 %ifdef MODULE_HOTKEYS