Changeset 589 in xtideuniversalbios for trunk/BIOS_Drive_Information_Tool/Src

Timestamp:

May 22, 2016, 12:26:57 PM (9 years ago)

Author:

Krister Nordvall

Message:

Changes:

• BIOS: Fixed a purely cosmetic bug from r542 where, in builds containing MODULE_EBIOS, the boot menu would display an incorrect drive size (0.4 kB with MODULE_STRINGS_COMPRESSED or 0.5 kB without) for old drives with no support for LBA.
• Fixed a bug from r392 where Vision_DetectAndReturnIDinAXandPortInDXifControllerPresent would return the ID in AL instead of AH (if DANGEROUS_DETECTION had been defined).
• Fixed a bug from r587 in AdvAtaInit.asm that would prevent detection of QDI Vision controllers.
• Also changed how the QDI Vision IDs are defined (removed the need for shifting) to avoid confusion. This fixed a potential bug from r587 in AdvAtaInit.asm where some IDs were not being shifted.
• Fixed a bug in PDC20x30.asm from r587 where GetPdcIDtoAX would not return with the IDE base port in DX so DisablePdcProgrammingMode would fail.
• Made some changes to ModuleDependency.inc and other files so that MODULE_ADVANCED_ATA now requires USE_386. Consequently it is no longer included in the regular AT-builds, only in the 386_8k-build.
• Moved the UNROLL_SECTORS_IN_CX_TO_xWORDS macros from IDE_8bit.inc to IdeIO.inc which means it's now possible to build a BIOS without MODULE_8BIT_IDE.
• XTIDECFG: Added a minimum DOS version check (since it needs DOS version 2+) to allow the program to quit gracefully in the unlikely scenario where someone tries to run it under DOS version 1.
• Made some changes to Drive.asm to improve drive enumeration. The old method using GET_DOS_DRIVE_PARAMETER_BLOCK_FOR_SPECIFIC_DRIVE worked well in Windows XP but not in Windows 98 SE (in Windows or in DOS mode). The two problems were; 1) The function call would access the drives which on single floppy drive systems would cause Windows to swap between A: and B: (throwing a blue screen asking the user to insert a disk etc). 2) Only floppy drives and FAT16 drives would be available in the list of drives, no FAT32/optical/network drives.
• Improved code in IdeControllerMenu.asm so that the default port addresses for all IDE interfaces are now restored when (re-)selecting the (same) type of IDE device.
• Also made it impossible to select a device type unless the required module is included in the loaded BIOS.
• The version check done when loading a BIOS now uses the FLASH_SIGNATURE definition from Version.inc. Any changes affecting RomVars now only requires updating that definition. This means that changes to RomVars must be implemented in both the BIOS and XTIDECFG before being committed to the repository.
• Added a compatibility fix for 3Com 3C503 cards to the ROM checksumming code in Buffers.asm (Buffers_GenerateChecksum).
• SerDrive: Made some minor changes to file names and paths to improve compatibility with case sensitive environments.
• BIOSDRVS: Made a minor size optimization which as a side effect also makes it compatible with all DOS versions including DOS version 1.
• Library: Renamed the WAIT_RETRACE_IF_NECESSARY_THEN macro to CALL_WAIT_FOR_RETRACE_IF_NECESSARY_THEN and made a tail-call-optimized version of it (JMP_WAIT_FOR_RETRACE_IF_NECESSARY_THEN).
• A speed optimization to the eRCL_IM macro for 386 and higher. This change breaks emulation in the sense that the macro will fail when given a memory operand as the first parameter.
• Other minor optimizations and fixes.

Location:

trunk/BIOS_Drive_Information_Tool/Src

Files:

• Bios.asm (modified) (1 diff)
• Main.asm (modified) (2 diffs)
• Print.asm (modified) (2 diffs)

trunk/BIOS_Drive_Information_Tool/Src/Bios.asm

@@ -146 +146 @@
     mov     bx, 55AAh
     int     BIOS_DISK_INTERRUPT_13h
-    jc      SHORT .NoEbiosPresent
-    cmp     bx, 0AA55h
-    jne     SHORT .NoEbiosPresent
-    eMOVZX  bx, ah          ; Copy version to BX
-    xor     ah, ah
-    ret
-.NoEbiosPresent:
-    mov     ah, RET_HD_INVALID
-    stc
+    jc      SHORT ReturnInvalidErrorCodeInAH    ; No EBIOS present
+    xor     bx, 0AA55h
+    jnz     SHORT ReturnInvalidErrorCodeInAH    ; No EBIOS present
+    xchg    bl, ah          ; Version to BX, BIOS error code to AH
     ret
 

trunk/BIOS_Drive_Information_Tool/Src/Main.asm

@@ -60 +60 @@
     mov     si, g_szProgramName
     call    Print_NullTerminatedStringFromSI
-
-    call    ReadAndDisplayAllHardDrives
-
-    ; Exit to DOS
-    mov     ax, 4C00h           ; Exit to DOS
-    int     21h
+    ; Fall to ReadAndDisplayAllHardDrives
 
 
@@ -112 +107 @@
     loop    .DisplayNextDriveFromDL
 .NoDrivesAvailable:
-    ret
+    ret     ; Exit to DOS
 
 

trunk/BIOS_Drive_Information_Tool/Src/Print.asm

@@ -42 +42 @@
 ;   Parameters:
 ;       AL:     Character to output
-;       DS:     BDA segment (zero)
-;       ES:DI:  Ptr to video memory where to output
-;   Returns:
-;       DI:     Incremented for next character
+;   Returns:
+;       Nothing
 ;   Corrupts registers:
 ;       AX, DX
@@ -51 +49 @@
 DosCharOut:
     xchg    dx, ax
-    mov     ah, 02h     ; DOS 1+ - WRITE CHARACTER TO STANDARD OUTPUT
-    int     21h         ; Call DOS
+    mov     ah, WRITE_CHARACTER_TO_STANDARD_OUTPUT
+    int     DOS_INTERRUPT_21h
     ret