Changeset 567 in xtideuniversalbios for trunk/XTIDE_Universal_BIOS/Src/Menus/BootMenu

Timestamp:

May 26, 2014, 1:25:15 PM (11 years ago)

Author:

krille_n_@…

google:author:

krille_n_@hotmail.com

Message:

Changes:

• Renamed MODULE_FEATURE_SETS to MODULE_POWER_MANAGEMENT.
• Renamed MODULE_VERY_LATE_INITIALIZATION to MODULE_VERY_LATE_INIT and removed it from the official builds.
• Removed the code that skips detection of slave drives on XT-CF controllers since slave drives can be used with Lo-tech ISA CompactFlash boards.
• Added autodetection of the SVC ADP50L controller to XTIDECFG.
• The autodetection of XT-CF controllers now requires MODULE_8BIT_IDE_ADVANCED in the loaded BIOS.
• Fixed a bug in XTIDECFG from r502 where the "Base (cmd block) address" menu option would be displayed when a serial device was selected as the IDE controller.
• XTIDECFG would display the "Enable interrupt" menu option for the XTIDE r1 but not for the XTIDE r2. It's now displayed for both controller types.
• Disabled the "Internal Write Cache" menu option in the Master/Slave Drive menus for serial device type drives.
• Optimizations and other fixes.

Location:

trunk/XTIDE_Universal_BIOS/Src/Menus/BootMenu

Files:

• BootMenu.asm (modified) (1 diff)
• BootMenuEvent.asm (modified) (2 diffs)
• BootMenuPrint.asm (modified) (3 diffs)

trunk/XTIDE_Universal_BIOS/Src/Menus/BootMenu/BootMenu.asm

@@ -55 +55 @@
 ;   Returns:
 ;       DX:     Drive number to be used for booting
-;       CF:     Set: There is a selected menu item, DL is valid
-;               Clear: The item selected is Rom Boot, DL is not valid
+;       CF:     Set: There is a selected menu item, DL is valid
+;               Clear: The item selected is Rom Boot, DL is not valid
 ;   Corrupts registers:
 ;       AX, BX

trunk/XTIDE_Universal_BIOS/Src/Menus/BootMenu/BootMenuEvent.asm

@@ -66 +66 @@
     ret
 
-MENUEVENT_InitializeMenuinitFromDSSI equ  (EventInitializeMenuinitFromSSBP - FirstEvent)
-MENUEVENT_ExitMenu equ  (BootMenuEvent_Completed - FirstEvent)
-MENUEVENT_ItemHighlightedFromCX equ (EventItemHighlightedFromCX - FirstEvent)
-MENUEVENT_KeyStrokeInAX equ (EventKeyStrokeInAX - FirstEvent)
-MENUEVENT_ItemSelectedFromCX equ (EventItemSelectedFromCX - FirstEvent)
-MENUEVENT_RefreshTitle equ (BootMenuPrint_TitleStrings - FirstEvent)
-MENUEVENT_RefreshInformation equ (BootMenuPrint_RefreshInformation - FirstEvent)
-MENUEVENT_RefreshItemFromCX equ (BootMenuPrint_RefreshItem - FirstEvent)
+MENUEVENT_InitializeMenuinitFromDSSI    equ (EventInitializeMenuinitFromSSBP    - FirstEvent)
+MENUEVENT_ExitMenu                      equ (BootMenuEvent_Completed            - FirstEvent)
+MENUEVENT_ItemHighlightedFromCX         equ (EventItemHighlightedFromCX         - FirstEvent)
+MENUEVENT_KeyStrokeInAX                 equ (EventKeyStrokeInAX                 - FirstEvent)
+MENUEVENT_ItemSelectedFromCX            equ (EventItemSelectedFromCX            - FirstEvent)
+MENUEVENT_RefreshTitle                  equ (BootMenuPrint_TitleStrings         - FirstEvent)
+MENUEVENT_RefreshInformation            equ (BootMenuPrint_RefreshInformation   - FirstEvent)
+MENUEVENT_RefreshItemFromCX             equ (BootMenuPrint_RefreshItem          - FirstEvent)
 ;
 ; Note that there is no entry for MENUEVENT_IdleProcessing.  If MENUEVENT_IDLEPROCESSING_ENABLE is not %defined,
@@ -95 +95 @@
     dw      EventNotHandled                     ; MENUEVENT.IdleProcessing
     dw      EventItemHighlightedFromCX          ; MENUEVENT.ItemHighlightedFromCX
-    
+
     dw      EventItemSelectedFromCX             ; MENUEVENT.ItemSelectedFromCX
     dw      EventKeyStrokeInAX                  ; MENUEVENT.KeyStrokeInAX

trunk/XTIDE_Universal_BIOS/Src/Menus/BootMenu/BootMenuPrint.asm

@@ -125 +125 @@
 .around:
 
-    mov     ax, g_szFddSizeOr                           ; .PrintXTFloppyType
+    mov     ax, g_szFddSizeOr                           ; .PrintXTFloppyType
     test    bl, bl                                      ; Two possibilities? (FLOPPY_TYPE_525_OR_35_DD)
     jz      SHORT .PushAXAndOutput
 
-    mov     al, (g_szFddUnknown - $$) & 0xff            ; .PrintUnknownFloppyType
+    mov     al, (g_szFddUnknown - $$) & 0xff            ; .PrintUnknownFloppyType
     cmp     bl, FLOPPY_TYPE_35_ED
     ja      SHORT .PushAXAndOutput
@@ -146 +146 @@
 ; Floppy Drive Types:
 ;
-;   0  Handled above
-;   1  FLOPPY_TYPE_525_DD          5 1/4   360K
-;   2  FLOPPY_TYPE_525_HD          5 1/4   1.2M
-;   3  FLOPPY_TYPE_35_DD           3 1/2   720K
-;   4  FLOPPY_TYPE_35_HD           3 1/2   1.44M
-;   5  3.5" ED on some BIOSes      3 1/2   2.88M
-;   6  FLOPPY_TYPE_35_ED           3 1/2   2.88M
-;   >6 Unknown, handled above
+;   0  Handled above
+;   1  FLOPPY_TYPE_525_DD          5 1/4   360K
+;   2  FLOPPY_TYPE_525_HD          5 1/4   1.2M
+;   3  FLOPPY_TYPE_35_DD           3 1/2   720K
+;   4  FLOPPY_TYPE_35_HD           3 1/2   1.44M
+;   5  3.5" ED on some BIOSes      3 1/2   2.88M
+;   6  FLOPPY_TYPE_35_ED           3 1/2   2.88M
+;   >6 Unknown, handled above
 ;
 ;--------------------------------------------------------------------
@@ -169 +169 @@
     xor     bh, bh
     mov     al,FloppyTypes.rgbCapacityMultiplier
-    mul     BYTE [cs:bx+FloppyTypes.rgbCapacity - 1]    ; -1 since 0 is handled above and not in the table
+    mul     BYTE [cs:bx+FloppyTypes.rgbCapacity - 1]    ; -1 since 0 is handled above and not in the table
 
 .PushAXAndOutput: