Changeset 558 in xtideuniversalbios for trunk/XTIDE_Universal_BIOS_Configurator_v2

Timestamp:

Jun 23, 2013, 3:52:31 PM (11 years ago)

Author:

krille_n_@…

google:author:

krille_n_@hotmail.com

Message:

Changes:

• Building the BIOS Drive Information Tool now works again.
• Moved all XT-CF related code to MODULE_8BIT_IDE_ADVANCED. I don't see how an XT-CF card could work without *_ADVANCED anyway but if I'm wrong, feel free to undo this. Note! The autodetection code in XTIDECFG has NOT been changed to reflect this (still relies on MODULE_8BIT_IDE).
• Optimizations and fixes in general.

Location:

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src

Files:

• EEPROM.asm (modified) (1 diff)
• Strings.asm (modified) (4 diffs)

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/EEPROM.asm

@@ -78 +78 @@
 EEPROM_GetXtideUniversalBiosSizeFromESDItoDXCX:
     xor     dx, dx
-    eMOVZX  cx, BYTE [es:di+ROMVARS.bRomSize]
-    eSHL_IM cx, 9               ; *= 512 for byte count
+    mov     ch, [es:di+ROMVARS.bRomSize]
+    mov     cl, dl
+    eSHL_IM ch, 1
     ret
 

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Strings.asm

@@ -210 +210 @@
 g_szItemIdeEnIRQ:           db  "Enable interrupt",NULL
 g_szItemIdeIRQ:             db  "IRQ",NULL
-g_szItemIdeXTCFwindow:      db  "XT-CF v2 Sector Window",NULL
 g_szItemSerialCOM:          db  "COM Port",NULL
 g_szItemSerialBaud:         db  "Baud Rate",NULL
@@ -222 +221 @@
 g_szDlgIdeEnIRQ:            db  "Enable interrupt?",NULL
 g_szDlgIdeIRQ:              db  "Enter IRQ channel (2...7 for 8-bit controllers, 2...15 for any other controller).",NULL
-g_szDlgIdeXTCFwindow:       db  "XT-CF v2 Sector Window segment (A000h...E800h).",NULL
 
 g_szNfoIdeBackToCfgMenu:    db  "Back to XTIDE Universal BIOS Configuration Menu.",NULL
@@ -232 +230 @@
 g_szNfoIdeEnIRQ:            db  "Interrupt or polling mode.",NULL
 g_szNfoIdeIRQ:              db  "IRQ channel to use.",NULL
-g_szNfoIdeXTCFwindow:       db  "Segment Address for XT-CF v2 4 kiB Sector Access Window.",NULL
 g_szNfoIdeSerialCOM:        db  "Select a COM port by number.",NULL
 g_szNfoIdeSerialBaud:       db  "Select the COM port's Baud Rate. The server must match this speed."
@@ -285 +282 @@
                             db  "Serial port virtual device",NULL
 
-g_szValueCfgDevice16b:      db  "16-bit",NULL
-g_szValueCfgDevice32b:      db  "32-bit",NULL
-g_szValueCfgDevice8b:       db  "8-bit",NULL
-g_szValueCfgDeviceRev1:     db  "XTIDE r1",NULL
-g_szValueCfgDeviceRev2:     db  "XTIDE r2",NULL
-g_szValueCfgDeviceXTCFPio8: db  "XTCF PIO",NULL
+g_szValueCfgDevice16b:                      db  "16-bit",NULL
+g_szValueCfgDevice32b:                      db  "32-bit",NULL
+g_szValueCfgDevice8b:                       db  "8-bit",NULL
+g_szValueCfgDeviceRev1:                     db  "XTIDE r1",NULL
+g_szValueCfgDeviceRev2:                     db  "XTIDE r2",NULL
+g_szValueCfgDeviceXTCFPio8:                 db  "XTCF PIO",NULL
 g_szValueCfgDeviceXTCFPio8WithBIUOffload:   db  "XTCF BIU",NULL
-g_szValueCfgDeviceXTCFDMA:  db  "XTCF DMA",NULL
-g_szValueCfgDeviceJrIdeIsa: db  "JR-ISA",NULL
-g_szValueCfgDeviceADP50L:   db  "ADP50L",NULL
-g_szValueCfgDeviceSerial:   db  "Serial",NULL
+g_szValueCfgDeviceXTCFDMA:                  db  "XTCF DMA",NULL
+g_szValueCfgDeviceJrIdeIsa:                 db  "JR-ISA",NULL
+g_szValueCfgDeviceADP50L:                   db  "ADP50L",NULL
+g_szValueCfgDeviceSerial:                   db  "Serial",NULL
 
 g_szSerialCOMChoice:    db  "COM1 - address 3F8h",LF