Changeset 477 in xtideuniversalbios for trunk/XTIDE_Universal_BIOS/Src/Device

Timestamp:

Oct 20, 2012, 5:04:32 PM (12 years ago)

Author:

aitotat@…

google:author:

aitotat@gmail.com

Message:

Changes to XTIDE Universal BIOS:

• Added non-working DMA transfer code.

Location:

trunk/XTIDE_Universal_BIOS/Src/Device

Files:

• IDE/IdeDmaTransfer.asm (modified) (3 diffs)
• Idepack.asm (modified) (1 diff)

trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeDmaTransfer.asm

@@ -21 +21 @@
 ; This struct must not be larger than IDEPACK without INTPACK.
 struc DMAVARS   ; Must not be larger than 9 bytes! See IDEPACK in RamVars.inc.
+    .wTotalWordsXferred         resb    2   ; 0-1, 
+    .wBytesLeftToXferLessOne    resb    2   ; 2-3, 
+    .bbbPhysicalAddress         resb    3   ; 4-6, 
+                                resb    1   ; 7, IDEPACK.bDeviceControl
 endstruc
 
@@ -32 +36 @@
 ;       AL:     IDE command that was used to start the transfer
 ;               (all PIO read and write commands including Identify Device)
-;       ES:SI:  Ptr to normalized data buffer
+;       ES:SI:  Ptr to data buffer (not normalized)
 ;       DS:DI:  Ptr to DPT (in RAMVARS segment)
 ;       SS:BP:  Ptr to IDEPACK
@@ -40 +44 @@
 ;       CF:     Cleared if success, Set if error
 ;   Corrupts registers:
-;       AL, BX, DX, SI, ES
+;       AL, BX, DX
 ;--------------------------------------------------------------------
 ALIGN JUMP_ALIGN
 IdeDmaTransfer_StartWithCommandInAL:
+    ; Initialize DMAVARS
+    xor     cx, cx
+    mov     [bp+DMAVARS.wTotalWordsXferred], cx
+    mov     ch, [bp+IDEPACK.bSectorCount]   ; CX = WORDs to transfer
+    shl     cx, 1                           ; WORDs to BYTEs, 0 = 65536
+    dec     cx
+    mov     [bp+DMAVARS.wBytesLeftToXferLessOne], cx
+
+    ; Convert Segment:Offset type pointer to physical address
+    xor     bx, bx
+    mov     cx, es
+%rep 4
+    shl cx, 1
+    rcl bx, 1
+%endrep
+    add     cx, si
+    adc     bl, bh
+    mov     [bp+DMAVARS.bbbPhysicalAddress], cx
+    mov     [bp+DMAVARS.bbbPhysicalAddress+2], bl
+
+    ; Calculate bytes for first page - 1
+    neg     cx  ; Max number of bytes for first page, 0 = 65536
+    dec     cx
+    MIN_U   cx, [bp+DMAVARS.wBytesLeftToXferLessOne]
+
+    ; Are we reading or writing?
+    test    al, 16  ; Bit 4 is cleared on all the read commands but set on 3 of the 4 write commands
+    jnz     SHORT WriteBlockToXTCF
+    cmp     al, COMMAND_WRITE_MULTIPLE
+    je      SHORT WriteBlockToXTCF
+    ; Fall to ReadBlockFromXTCF
+
+
+;--------------------------------------------------------------------
+; ReadBlockFromXTCF
+;   Parameters:
+;       CX:     Bytes in first page - 1
+;       DS:DI:  Ptr to DPT (in RAMVARS segment)
+;       SS:BP:  Ptr to DMAVARS
+;   Returns:
+;       DS:DI:  Ptr to DPT (in RAMVARS segment)
+;       AH:     BIOS Error code
+;       CX:     Number of successfully transferred sectors
+;       CF:     0 if transfer successful
+;               1 if any error
+;   Corrupts registers:
+;       AL, BX, DX
+;--------------------------------------------------------------------
+ReadBlockFromXTCF:
+    ; 8-bit DMA transfers must be done withing 64k physical page.
+    ; We support maximum of 128 sectors (65536 bytes) per one INT 13h call
+    ; so we might need to separate transfer to 2 separate DMA operations.
+
+    ; Transfer first DMA page
+    mov     ah, CHANNEL_3 | WRITE | AUTOINIT_DISABLE | ADDRESS_INCREMENT | DEMAND_MODE
+    call    StartDMAtransferForXTCFwithDmaModeInAH
+    jc      SHORT ReturnNumberOfSectorsXferred
+
+    ; Transfer second DMA page if necessary (always less than 64k)
+    call    UpdateVariablesForSecondPageIfRequired
+    jc      SHORT SecondDmaPageIsNotRequired
+    mov     ah, CHANNEL_3 | WRITE | AUTOINIT_DISABLE | ADDRESS_INCREMENT | DEMAND_MODE
+    call    StartDMAtransferForXTCFwithDmaModeInAH
+    jc      SHORT ReturnNumberOfSectorsXferred
+    ; Fall to BothDmaPagesTransferredSuccessfully
+
+BothDmaPagesTransferredSuccessfully:
+    inc     cx          ; Never overflows since second page always less than 64k
+    shr     cx, 1       ; BYTEs to WORDs
+    add     [bp+DMAVARS.wTotalWordsXferred], cx
+SecondDmaPageIsNotRequired:
+    xor     ah, ah
+ReturnNumberOfSectorsXferred:
+    mov     cx, [bp+DMAVARS.wTotalWordsXferred]
+    xchg    cl, ch      ; WORDs to sectors
+    ret
+
+
+;--------------------------------------------------------------------
+; WriteBlockToXTCF
+;   Parameters:
+;       CX:     Bytes in first page - 1
+;       DS:DI:  Ptr to DPT (in RAMVARS segment)
+;       SS:BP:  Ptr to DMAVARS
+;   Returns:
+;       DS:DI:  Ptr to DPT (in RAMVARS segment)
+;       AH:     BIOS Error code
+;       CX:     Number of successfully transferred sectors
+;       CF:     0 if transfer successful
+;               1 if any error
+;   Corrupts registers:
+;       AL, BX, DX
+;--------------------------------------------------------------------
+WriteBlockToXTCF:
+    ; Transfer first DMA page
+    mov     ah, CHANNEL_3 | READ | AUTOINIT_DISABLE | ADDRESS_INCREMENT | DEMAND_MODE
+    call    StartDMAtransferForXTCFwithDmaModeInAH
+    jc      SHORT ReturnNumberOfSectorsXferred
+
+    ; Transfer second DMA page if necessary (always less than 64k)
+    call    UpdateVariablesForSecondPageIfRequired
+    jc      SHORT SecondDmaPageIsNotRequired
+    mov     ah, CHANNEL_3 | READ | AUTOINIT_DISABLE | ADDRESS_INCREMENT | DEMAND_MODE
+    call    StartDMAtransferForXTCFwithDmaModeInAH
+    jc      SHORT ReturnNumberOfSectorsXferred
+    jmp     SHORT BothDmaPagesTransferredSuccessfully
+
+
+;--------------------------------------------------------------------
+; StartDMAtransferForXTCFwithDmaModeInAH
+;   Parameters:
+;       AH:     Byte for DMA Mode Register
+;       CX:     Number of BYTEs to transfer - 1
+;       DS:DI:  Ptr to DPT (in RAMVARS segment)
+;   Returns:
+;       AH:     BIOS Error code
+;       CF:     0 if transfer successful
+;               1 if any error
+;   Corrupts registers:
+;       AL, BX, DX
+;--------------------------------------------------------------------
+StartDMAtransferForXTCFwithDmaModeInAH:
+    push    cx
+
+    ; Program 8-bit DMA Controller
+
+    ; Disable Interrupts and DMA Channel 3 during DMA setup
+    cli                                     ; Disable interrupts
+    mov     al, SET_CH3_MASK_BIT
+    out     MASK_REGISTER_DMA8_out, al      ; Disable DMA Channel 3
+
+    ; Set DMA Mode (read or write using channel 3)
+    mov     al, ah
+    out     MODE_REGISTER_DMA8_out, al
+
+    ; Set address to DMA controller
+    out     CLEAR_FLIPFLOP_DMA8_out, al     ; Reset flip-flop to low byte
+    mov     ax, [bp+DMAVARS.bbbPhysicalAddress]
+    out     BASE_AND_CURRENT_ADDRESS_REGISTER_DMA8_CH3_out, al  ; Low byte
+    mov     al, ah
+    out     BASE_AND_CURRENT_ADDRESS_REGISTER_DMA8_CH3_out, al  ; High byte
+    mov     al, [bp+DMAVARS.bbbPhysicalAddress+2]
+    out     PAGE_DMA8_CH_3, al
+
+    ; Set number of bytes to transfer (DMA controller must be programmed number of bytes - 1)
+    out     CLEAR_FLIPFLOP_DMA8_out, al     ; Reset flip-flop to low byte
+    mov     ax, cx
+    out     BASE_AND_CURRENT_COUNT_REGISTER_DMA8_CH3_out, al    ; Low byte
+    mov     al, ah
+    out     BASE_AND_CURRENT_COUNT_REGISTER_DMA8_CH3_out, al    ; High byte
+
+    ; Enable DMA Channel 3
+    mov     al, CLEAR_CH3_MASK_BIT
+    out     MASK_REGISTER_DMA8_out, al      ; Enable DMA Channel 3
+    sti                                     ; Enable interrupts
+
+
+    ; XT-CFv2 will present data in 16-byte blocks, but byte count may not
+    ; be divisable by 16 due to boundary crossing.  So catch any < 16-byte
+    ; block by adding 15, then dividing bytes (in CX) by 16 to get the
+    ; total block requests.  The 8237 is programmed with the actual byte
+    ; count and will end the transfer by asserting TC when done.
+    xor     ax, ax
+    add     cx, BYTE 1 + 15     ; Number of BYTEs to xfer + 15
+    adc     al, ah
+    shr     ax, 1
+    rcr     cx, 1
+    eSHR_IM cx, 3               ; CX = Number of 16 byte blocks
+    mov     dx, [di+DPT.wBasePort]
+    add     dl, XTCF_CONTROL_REGISTER
+
+.MoreToDo:                      ; at this point, cx must be >0
+    mov     al, 0x40            ; 0x40 = Raise DRQ and clear XT-CFv2 transfer counter
+.NextDemandBlock:
+    out     dx, al              ; get up to 16 bytes from XT-CF card
+    loop    .NextDemandBlock    ; decrement CX and loop if <> 0
+                                ; (Loop provides a wait-state between 16-byte blocks; do not unroll)
+
+.CleanUp:
+    ; check the transfer is actually done - in case another DMA operation messed things up
+    inc     cx                                      ; set up CX, in case we need to do an extra iteration
+    in      al, STATUS_REGISTER_DMA8_in             ; get DMA status register
+    test    al, FLG_CH3_HAS_REACHED_TERMINAL_COUNT  ; test DMA ch.3 TC bit
+    jz      SHORT .MoreToDo                         ; it wasn't set so get more bytes
+
+.EndDMA:
+    mov     al, 0x10            ; 
+    out     dx, al              ; set back to DMA enabled status
+
+    ; Check IDE Status Register for errors
+    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_BSY)
+    call    IdeWait_PollStatusFlagInBLwithTimeoutInBH
+    pop     cx
+    ret
+
+
+;--------------------------------------------------------------------
+; UpdateVariablesForSecondPageIfRequired
+;   Parameters:
+;       CX:     Number of BYTEs in first page - 1
+;       SS:BP:  Ptr to DMAVARS
+;   Returns:
+;       CX:     Bytes left to transfer - 1 (if CF = 0)
+;       CF:     0 if second DMA transfer required
+;               1 if one DMA transfer was enough
+;   Corrupts registers:
+;       AX, (CX)
+;--------------------------------------------------------------------
+UpdateVariablesForSecondPageIfRequired:
+    inc     cx                          ; BYTEs in first page
+    jcxz    .FullPageXferred            ; 0 = 65536
+
+    ; Store total WORDs transferred so far
+    mov     ax, cx
+    shr     ax, 1                       ; BYTEs to WORDs
+    mov     [bp+DMAVARS.wTotalWordsXferred], ax
+
+    ; Get bytes left to transfer for second DMA page
+    mov     ax, [bp+DMAVARS.wBytesLeftToXferLessOne]
+    sub     ax, cx
+    jb      SHORT .OnePageWasEnough
+
+    ; Increment address
+    add     [bp+DMAVARS.bbbPhysicalAddress], cx
+    adc     BYTE [bp+DMAVARS.bbbPhysicalAddress+2], 0   ; Never sets CF
+    xchg    cx, ax
+    ret
+
+.FullPageXferred:
+    mov     WORD [bp+DMAVARS.wTotalWordsXferred], 65536 / 2
+    stc
+.OnePageWasEnough:
+    ret

trunk/XTIDE_Universal_BIOS/Src/Device/Idepack.asm

@@ -75 +75 @@
 
     ; Normalize data buffer pointer to ES:SI
+%ifdef MODULE_8BIT_IDE
+    cmp     BYTE [di+DPT_ATA.bDevice], DEVICE_8BIT_XTCF_DMA
+    jne     SHORT .NormalizeForSmallestPossibleOffset
+
+    ; DMA transfers do not need to normalize pointer
+    ; (it will be converted to physical address in IdeDmaTransfer.asm)
+    les     si, [es:si+DAP.dwMemoryAddress]
+    jmp     SHORT GetDeviceControlByteToIdepackAndStartTransfer
+%endif ; MODULE_8BIT_IDE
+
+.NormalizeForSmallestPossibleOffset:
     mov     ax, [es:si+DAP.wOffset]
     mov     cx, ax