Changeset 298 in xtideuniversalbios for wiki


Ignore:
Timestamp:
Mar 8, 2012, 2:30:02 PM (13 years ago)
Author:
aitotat@…
google:author:
aitotat@gmail.com
Message:

Edited wiki page Manual_v2_0_0 through web user interface.

File:
1 edited

Legend:

Unmodified
Added
Removed

  • wiki/Manual_v2_0_0.wiki

    r297 r298  
    2929== Different builds ==
    3030
    31 At the moment there are different builds included in the XTIDE Universal BIOS zip file. 15 kiB builds (*L.BIN) include support for JR-IDE/ISA but are otherwise the same as 8 kiB builds.
     31At the moment there are different builds included in the XTIDE Universal BIOS zip file. 15 kiB builds (xxxL.BIN) include support for JR-IDE/ISA but are otherwise the same as 8 kiB builds.
    3232  * IDE_XT.BIN, IDE_JR8K.BIN and IDE_XTL.BIN (XT build)
    3333   XT build uses only instructions supported by 8086/8088 making it the only build that can be used on any PC, including the original IBM PC model 5150. IDE_JR8K.BIN has JR-IDE/ISA support but serial port features are removed to reduce the size to 8 kiB.
    … …  
    8888  * Start flashing
    8989  * EEPROM type [default=2864]
    90    Selects EEPROM type. XTIDE rev1 uses 2864 (8 kiB) EEPROM. Select 2864mod if you have done the A0<->A3 address line swap mod to your XTIDE.
     90   Selects EEPROM type. XTIDE rev1 uses 2864 (8 kiB) EEPROM. Select 2864mod if you have done the A0-A3 address line swap mod to your XTIDE.
    9191  * SDP command [default=Enable]
    9292   Selects Software Data Protect command to be written before every page. You should set if to Enable if the EEPROM supports is.
    … …  
    163163   These will appear when "User specified CHS" is enabled. Maximum values of 16383 Cylinders, 16 Heads and 63 Sectors per track will provide capacity of 7.8 GiB/8.4 GB that is the maximum that MS-DOS 4.xx to 6.xx supports. Note that this will force CHS addressing so once formatted, there will be data corruption if you try to access the drive with system using LBA addressing.
    164164  * Millions of sectors
    165    This will appear when "User specified LBA" is enabled. You can specify the drive capacity in millions of sectors. Note that MS-DOS 7.x or FreeDOS is required to access more than 7.8 GiB/8.4 GB.
     165   This will appear when "User specified LBA" is enabled. You can specify the drive capacity in millions of sectors. Note that MS-DOS 7.x or FreeDOS is required to access more than 7.8 GiB/8.4 GB.-
Note: See TracChangeset for help on using the changeset viewer.