Changeset 294 in xtideuniversalbios for trunk/XTIDE_Universal_BIOS


Ignore:
Timestamp:
Mar 4, 2012, 1:35:10 AM (13 years ago)
Author:
krille_n_@…
google:author:
krille_n_@hotmail.com
Message:

Commit 2/2 (BIOS):

  • Fixed a bug in AH1h_HStatus.asm.
  • Minor optimizations.
  • Fixed spelling and did some cleaning.
Location:
trunk/XTIDE_Universal_BIOS
Files:
48 edited

Legend:

Unmodified
Added
Removed

  • trunk/XTIDE_Universal_BIOS/Inc/BootMenu.inc

    r291 r294  
    11; Project name  :   XTIDE Universal BIOS
    22; Description   :   Equates and structs used in Boot Menu.
     3
    34%ifndef BOOTMENU_INC
    45%define BOOTMENU_INC
    … …  
    1920
    2021; Boot Menu Information Table. These are generated for all XTIDE Universal
    21 ; BIOS drives. Available only until boot is successfull.
     22; BIOS drives. Available only until boot is successful.
    2223MAX_HARD_DISK_NAME_LENGTH               EQU     30      ; Bytes reserved for drive name
    2324
    … …  
    3031DPT_BOOTMENUINFO_SIZE_MULTIPLIER  equ   BOOTMENUINFO_size / LARGEST_DPT_SIZE
    3132
    32 %ifndef CHECK_FOR_UNUSED_ENTRYPOINTS               
     33%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
    3334
    34 %if MAX_HARD_DISK_NAME_LENGTH % 2 <> 0 
    35 %error "MAX_HARD_DISK_NAME_LENGTH needs to be a multiple of 2, memory is moved with word operations."
     35%if MAX_HARD_DISK_NAME_LENGTH % 2 <> 0
     36    %error "MAX_HARD_DISK_NAME_LENGTH needs to be a multiple of 2, memory is moved with word operations."
    3637%endif
    3738
    3839%if BOOTMENUINFO_size % LARGEST_DPT_SIZE <> 0
    39 %error "BOOTMENUINFO's size must be an even multiple of DPT's size.  Add or remove padding at the bottom of BOOTMENUINFO to bring the two sizes into alignment.  As BOOTMENUINFO is only used at boot time, with plenty of memory to consume, it is OK to waste some space here."
     40    %error "BOOTMENUINFO's size must be an even multiple of DPT's size.  Add or remove padding at the bottom of BOOTMENUINFO to bring the two sizes into alignment.  As BOOTMENUINFO is only used at boot time, with plenty of memory to consume, it is OK to waste some space here."
    4041%endif
    4142
    4243%if BOOTMENUINFO.szDrvName <> 0
    43 %error "BOOTMENUINFO.szDrvName is assumed to be the first member of struc BOOTMENUINFO, in BootMenuPrint_RefreshItem"
     44    %error "BOOTMENUINFO.szDrvName is assumed to be the first member of struc BOOTMENUINFO, in BootMenuPrint_RefreshItem"
    4445%endif
    4546

  • trunk/XTIDE_Universal_BIOS/Inc/BootVars.inc

    r254 r294  
    1010
    1111
    12 ; Pre-boot variables. These do not exist after successfull boot to OS.
     12; Pre-boot variables. These do not exist after successful boot to OS.
    1313; Segment is always 0000h, same as BDA segment
    1414struc BOOTVARS
    … …  
    9595    mov     ss, ax
    9696    lss     sp, [ss:BOOTVARS.dwPostStack]
    97 %endif 
     97%endif
    9898%endmacro
    9999

  • trunk/XTIDE_Universal_BIOS/Inc/CustomDPT.inc

    r258 r294  
    3737%ifdef MODULE_SERIAL
    3838; DPT for Serial devices
    39 struc DPT_SERIAL 
     39struc DPT_SERIAL
    4040    .dpt                        resb    DPT_size
    4141
    … …  
    6363FLGH_DPT_INTERRUPT_IN_SERVICE   EQU (1<<3)  ; Set when waiting for IRQ
    6464FLGH_DPT_RESET_nDRDY            EQU (1<<4)  ; Drive ready to accept commands
    65 FLGH_DPT_RESET_nINITPRMS        EQU (1<<5)  ; Initialize Device Parameters successfull
    66 FLGH_DPT_RESET_nRECALIBRATE     EQU (1<<6)  ; Recalibrate successfull
    67 FLGH_DPT_RESET_nSETBLOCK        EQU (1<<7)  ; Initialize Block Mode successfull
     65FLGH_DPT_RESET_nINITPRMS        EQU (1<<5)  ; Initialize Device Parameters successful
     66FLGH_DPT_RESET_nRECALIBRATE     EQU (1<<6)  ; Recalibrate successful
     67FLGH_DPT_RESET_nSETBLOCK        EQU (1<<7)  ; Initialize Block Mode successful
    6868MASKH_DPT_RESET                 EQU 0F0h
    6969

  • trunk/XTIDE_Universal_BIOS/Inc/Int13h.inc

    r218 r294  
    55
    66; Hard Disk function (INT 13h) return status codes in AH
    7 RET_HD_SUCCESS          EQU     0h      ; Operation succesfull, no error occurred
     7RET_HD_SUCCESS          EQU     0h      ; Operation successful, no error occurred
    88RET_HD_INVALID          EQU     1h      ; Invalid value passed or unsupported func
    99RET_HD_ADDRMARK         EQU     2h      ; Missing address mark

  • trunk/XTIDE_Universal_BIOS/Src/Boot/BootMenu.asm

    r258 r294  
    4343    call    RamVars_GetSegmentToDS
    4444;;; fall-through
    45                        
     45
    4646ALIGN JUMP_ALIGN
    4747BootMenu_GetDriveToDXforMenuitemInCX:
    … …  
    136136BootMenu_GetMenuitemToAXforAsciiHotkeyInAL:
    137137    call    Char_ALtoUpperCaseLetter
    138     xor     ah, ah
     138    cbw
    139139    xchg    ax, cx
    140140    call    BootMenu_GetLetterForFirstHardDiskToAL

  • trunk/XTIDE_Universal_BIOS/Src/Boot/BootMenuPrint.asm

    r262 r294  
    77;--------------------------------------------------------------------
    88; BootMenuPrint_RefreshItem
    9 ; 
     9;
    1010;   Parameters:
    1111;       DL:     Untranslated Floppy Drive number
    … …  
    1919    call    BootMenu_GetDriveToDXforMenuitemInCX_And_RamVars_GetSegmentToDS
    2020    jnc     BootMenuEvent_EventCompleted            ; if no menu item selected, out we go
    21        
     21
    2222    push    bp
    2323    mov     bp, sp
    … …  
    2929    mov     si, g_szDriveNumBOOTNFO                 ; special g_szDriveNum that prints from BDA
    3030    jmp     .go
    31        
     31
    3232.notOurs:
    33     mov     si,g_szDriveNum                                 
     33    mov     si,g_szDriveNum
    3434    mov     bx,g_szForeignHD                        ; assume a hard disk for the moment
    35        
    36     test    dl,80h                                         
     35
     36    test    dl, dl
    3737    js      .go
    3838    mov     bl,((g_szFloppyDrv)-$$ & 0xff)          ; and revisit the earlier assumption...
    39        
     39
    4040.go:
    4141    mov     ax, dx                                  ; preserve DL for the floppy drive letter addition
    … …  
    4545    add     al, 'A'                                 ; floppy drive letter (we always push this although
    4646    push    ax                                      ; the hard disks don't ever use it, but it does no harm)
    47        
     47
    4848    jmp     short BootMenuPrint_RefreshInformation.FormatRelay
    4949
    … …  
    8888    jmp     short BootMenuPrint_RefreshInformation.FormatRelay
    8989
    90        
     90
    9191;--------------------------------------------------------------------
    9292; BootMenuPrint_FloppyMenuitemInformation
    … …  
    101101ALIGN JUMP_ALIGN
    102102BootMenuPrint_RefreshInformation:
    103     CALL_MENU_LIBRARY ClearInformationArea     
    104        
     103    CALL_MENU_LIBRARY ClearInformationArea
     104
    105105    call    BootMenu_GetDriveToDXforMenuitemInCX_And_RamVars_GetSegmentToDS
    106106    jnc     BootMenuEvent_EventCompleted                ; if no menu selection, abort
    … …  
    115115    inc     dl                                          ; are we a hard disk?
    116116    dec     dl                                          ; inc/dec will set SF, without modifying CF or DL
    117     js      .HardDiskRefreshInformation 
     117    js      .HardDiskRefreshInformation
    118118
    119119    jnc     .ours                                       ; Based on CF from FindDPT_ForDriveNumberInDL above
    … …  
    122122.ours:
    123123    call    AH8h_GetDriveParameters
    124 .around:               
     124.around:
    125125
    126126    mov     ax, g_szFddSizeOr                           ; .PrintXTFloppyType
    127     test    bl, bl                                      ; Two possibilities? (FLOPPY_TYPE_525_OR_35_DD)     
     127    test    bl, bl                                      ; Two possibilities? (FLOPPY_TYPE_525_OR_35_DD)
    128128    jz      SHORT .PushAXAndOutput
    129129
    … …  
    131131    cmp     bl, FLOPPY_TYPE_35_ED
    132132    ja      SHORT .PushAXAndOutput
    133        
     133
    134134    ; Fall to .PrintKnownFloppyType
    135135
    … …  
    142142;   Corrupts registers:
    143143;       AX, BX, SI, DI
    144 ; 
     144;
    145145; Floppy Drive Types:
    146146;
    147 ;   0  Handled above 
     147;   0  Handled above
    148148;   1  FLOPPY_TYPE_525_DD          5 1/4   360K
    149149;   2  FLOPPY_TYPE_525_HD          5 1/4   1.2M
    … …  
    153153;   6  FLOPPY_TYPE_35_ED           3 1/2   2.88M
    154154;   >6 Unknwon, handled above
    155 ; 
     155;
    156156;--------------------------------------------------------------------
    157157.PrintKnownFloppyType:
    158158    mov     al, (g_szFddSize - $$) & 0xff
    159159    push    ax
    160        
     160
    161161    mov     al, (g_szFddThreeHalf - $$) & 0xff
    162162    cmp     bl, FLOPPY_TYPE_525_HD
    163163    ja      .ThreeHalf
    164164    mov     al, (g_szFddFiveQuarter - $$) & 0xff
    165 .ThreeHalf:     
     165.ThreeHalf:
    166166    push    ax                                          ; "5 1/4" or "3 1/2"
    167167
    … …  
    170170    mul     byte [cs:bx+FloppyTypes.rgbCapacity - 1]    ; -1 since 0 is handled above and not in the table
    171171
    172 .PushAXAndOutput:                   
     172.PushAXAndOutput:
    173173    push    ax
    174174
    … …  
    189189;--------------------------------------------------------------------
    190190ALIGN JUMP_ALIGN
    191 .HardDiskRefreshInformation:       
     191.HardDiskRefreshInformation:
    192192    jc      .HardDiskMenuitemInfoForForeignDrive        ; Based on CF from FindDPT_ForDriveNumberInDL (way) above
    193193
    … …  
    196196    call    BootMenuInfo_GetTotalSectorCount            ; Get Total LBA Size
    197197    jmp     .ConvertSectorCountInBXDXAXtoSizeAndPushForFormat
    198        
     198
    199199.HardDiskMenuitemInfoForForeignDrive:
    200200    call    DriveXlate_ToOrBack
    … …  
    208208    push    ax                      ; Size in magnitude
    209209    push    cx                      ; Tenths
    210     push    dx                      ; Magnitude character       
    211                
     210    push    dx                      ; Magnitude character
     211
    212212    test    di,di
    213213    jz      short BootMenuPrint_FormatCSSIfromParamsInSSBP
    … …  
    225225;   Returns:
    226226;       BP:     Popped from stack
    227 ;       CF:     Set since menu event was handled successfully       
     227;       CF:     Set since menu event was handled successfully
    228228;   Corrupts registers:
    229229;       AX, DI
    … …  
    232232BootMenuPrint_FormatCSSIfromParamsInSSBP:
    233233    CALL_DISPLAY_LIBRARY FormatNullTerminatedStringFromCSSI
    234     stc             ; Successfull return from menu event
     234    stc             ; Successful return from menu event
    235235    pop     bp
    236236    ret
    237        
    238        
     237
     238
    239239;--------------------------------------------------------------------
    240240; BootMenuPrint_ClearScreen
    … …  
    364364    push    cx          ; Key attribute for last space
    365365    mov     si, g_szHotkey
    366        
    367 BootMenuPrint_FormatCSSIfromParamsInSSBP_Relay: 
     366
     367BootMenuPrint_FormatCSSIfromParamsInSSBP_Relay:
    368368    jmp     SHORT BootMenuPrint_FormatCSSIfromParamsInSSBP
    369369

  • trunk/XTIDE_Universal_BIOS/Src/Boot/BootMenuPrintCfg.asm

    r258 r294  
    2424;--------------------------------------------------------------------
    2525.BootMenuPrintCfg_ForOurDrive:
    26     eMOVZX  ax, BYTE [di+DPT.bIdevarsOffset]
     26    eMOVZX  ax, [di+DPT.bIdevarsOffset]
    2727    xchg    bx, ax                      ; CS:BX now points to IDEVARS
    2828    ; Fall to .PushAndFormatCfgString
    … …  
    4040.PushAddressingMode:
    4141    AccessDPT_GetUnshiftedAddressModeToALZF
    42     ;; 
    43     ;; This multiply both shifts the addressing mode bits down to low order bits, and 
     42    ;;
     43    ;; This multiply both shifts the addressing mode bits down to low order bits, and
    4444    ;; at the same time multiplies by the size of the string displacement.  The result is in AH,
    4545    ;; with AL clear, and so we exchange AL and AH after the multiply for the final result.
    46     ;; 
     46    ;;
    4747    mov     cl,(1<<(8-ADDRESSING_MODE_FIELD_POSITION)) * g_szAddressingModes_Displacement
    4848    mul     cl
    … …  
    5050    add     ax,g_szAddressingModes
    5151    push    ax
    52        
     52
    5353;--------------------------------------------------------------------
    5454; PushBlockMode
    … …  
    8282    mov     al,g_szBusTypeValues_Displacement
    8383    mul     BYTE [cs:bx+IDEVARS.bDevice]
    84        
     84
    8585    shr     ax,1            ; divide by 2 since IDEVARS.bDevice is multiplied by 2
    86        
     86
    8787    add     ax,g_szBusTypeValues
    88     push    ax 
    89                
     88    push    ax
     89
    9090;--------------------------------------------------------------------
    9191; PushIRQ
    … …  
    9999;--------------------------------------------------------------------
    100100.PushIRQ:
    101     mov     al, BYTE [cs:bx+IDEVARS.bIRQ]
     101    mov     al, [cs:bx+IDEVARS.bIRQ]
    102102    cbw
    103103    push    ax

  • trunk/XTIDE_Universal_BIOS/Src/Boot/BootSector.asm

    r148 r294  
    1111;       DS:     RAMVARS segment
    1212;   Returns:
    13 ;       ES:BX:  Ptr to boot sector (if successfull)
    14 ;       CF:     Set if boot sector loaded succesfully
     13;       ES:BX:  Ptr to boot sector (if successful)
     14;       CF:     Set if boot sector loaded successfully
    1515;               Cleared if failed to load boot sector
    1616;   Corrupts registers:
    … …  
    4646;   Returns:
    4747;       AH:     INT 13h error code
    48 ;       ES:BX:  Ptr to boot sector (if successfull)
    49 ;       CF:     Cleared if read successfull
     48;       ES:BX:  Ptr to boot sector (if successful)
     49;       CF:     Cleared if read successful
    5050;               Set if any error
    5151;   Corrupts registers:
    … …  
    7373;   Returns:
    7474;       AH:     INT 13h error code
    75 ;       CF:     Cleared if read successfull
     75;       CF:     Cleared if read successful
    7676;               Set if any error
    7777;   Corrupts registers:
    … …  
    9696;       AH:     INT 13h error code
    9797;       ES:BX:  Ptr to boot sector
    98 ;       CF:     Cleared if read successfull
     98;       CF:     Cleared if read successful
    9999;               Set if any error
    100100;   Corrupts registers:

  • trunk/XTIDE_Universal_BIOS/Src/Device/Device.asm

    r268 r294  
    66
    77
    8 %macro TEST_USIGN_DPT_AND_JUMP_IF_SERIAL_DEVICE 1
     8%macro TEST_USING_DPT_AND_JUMP_IF_SERIAL_DEVICE 1
    99    test    BYTE [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
    1010    jnz     SHORT %1
    … …  
    4242    CMP_USING_IDEVARS_IN_CSBP_AND_JUMP_IF DEVICE_SERIAL_PORT, .FinalizeDptForSerialPortDevice
    4343    jmp     IdeDPT_Finalize
    44 .FinalizeDptForSerialPortDevice: 
     44.FinalizeDptForSerialPortDevice:
    4545    jmp     SerialDPT_Finalize
    4646
    … …  
    6363    %ifdef MODULE_SERIAL                ; IDE + JR-IDE/ISA + Serial
    6464    Device_ResetMasterAndSlaveController:
    65         TEST_USIGN_DPT_AND_JUMP_IF_SERIAL_DEVICE ReturnSuccessForSerialPort
     65        TEST_USING_DPT_AND_JUMP_IF_SERIAL_DEVICE ReturnSuccessForSerialPort
    6666        CMP_USING_DPT_AND_JUMP_IF_JRIDE_DEVICE .ResetJrIDE
    6767        jmp     IdeCommand_ResetMasterAndSlaveController
    … …  
    7575%elifdef MODULE_SERIAL                  ; IDE + Serial
    7676Device_ResetMasterAndSlaveController:
    77     TEST_USIGN_DPT_AND_JUMP_IF_SERIAL_DEVICE ReturnSuccessForSerialPort
     77    TEST_USING_DPT_AND_JUMP_IF_SERIAL_DEVICE ReturnSuccessForSerialPort
    7878    jmp     IdeCommand_ResetMasterAndSlaveController
    7979
    … …  
    152152    %ifdef MODULE_SERIAL                ; IDE + JR-IDE/ISA + Serial
    153153    Device_OutputCommandWithParameters:
    154         TEST_USIGN_DPT_AND_JUMP_IF_SERIAL_DEVICE .OutputCommandToSerialPort
     154        TEST_USING_DPT_AND_JUMP_IF_SERIAL_DEVICE .OutputCommandToSerialPort
    155155        CMP_USING_DPT_AND_JUMP_IF_JRIDE_DEVICE .OutputCommandToJrIDE
    156156        jmp     IdeCommand_OutputWithParameters
    … …  
    164164%elifdef MODULE_SERIAL                  ; IDE + Serial
    165165Device_OutputCommandWithParameters:
    166     TEST_USIGN_DPT_AND_JUMP_IF_SERIAL_DEVICE .OutputCommandToSerialPort
     166    TEST_USING_DPT_AND_JUMP_IF_SERIAL_DEVICE .OutputCommandToSerialPort
    167167    jmp     IdeCommand_OutputWithParameters
    168168
    … …  
    198198    %ifdef MODULE_SERIAL                ; IDE + JR-IDE/ISA + Serial
    199199    Device_SelectDrive:
    200         TEST_USIGN_DPT_AND_JUMP_IF_SERIAL_DEVICE ReturnSuccessForSerialPort
     200        TEST_USING_DPT_AND_JUMP_IF_SERIAL_DEVICE ReturnSuccessForSerialPort
    201201        CMP_USING_DPT_AND_JUMP_IF_JRIDE_DEVICE .SelectJrIdeDrive
    202202        jmp     IdeCommand_SelectDrive
    … …  
    210210%elifdef MODULE_SERIAL                  ; IDE + Serial
    211211Device_SelectDrive:
    212     TEST_USIGN_DPT_AND_JUMP_IF_SERIAL_DEVICE ReturnSuccessForSerialPort
     212    TEST_USING_DPT_AND_JUMP_IF_SERIAL_DEVICE ReturnSuccessForSerialPort
    213213    jmp     IdeCommand_SelectDrive
    214214

  • trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeCommand.asm

    r285 r294  
    130130    ; Output Sector Address High (only used by LBA48)
    131131%ifdef MODULE_EBIOS
    132     eMOVZX  ax, BYTE [bp+IDEPACK.bLbaLowExt]    ; Zero sector count
     132    eMOVZX  ax, [bp+IDEPACK.bLbaLowExt]     ; Zero sector count
    133133    mov     cx, [bp+IDEPACK.wLbaMiddleAndHighExt]
    134134    call    IDEDEVICE%+OutputSectorCountAndAddress

  • trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeError.asm

    r267 r294  
    2323
    2424%ifndef ASSEMBLE_SHARED_IDE_DEVICE_FUNCTIONS    ; JR-IDE/ISA
    25     jmp     ContinueFromMemIdeError
     25    jmp     ContinueFromMemIdeError     ; What's this supposed to do? *FIXME*
    2626%else
    2727ContinueFromMemIdeError:

  • trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeTransfer.asm

    r251 r294  
    5454;       AH:     BIOS Error code
    5555;       CX:     Number of successfully transferred sectors
    56 ;       CF:     0 if transfer succesfull
     56;       CF:     0 if transfer successful
    5757;               1 if any error
    5858;   Corrupts registers:
    … …  
    121121;       AH:     BIOS Error code
    122122;       CX:     Number of successfully transferred sectors
    123 ;       CF:     0 if transfer succesfull
     123;       CF:     0 if transfer successful
    124124;               1 if any error
    125125;   Corrupts registers:

  • trunk/XTIDE_Universal_BIOS/Src/Device/MemoryMappedIDE/MemIdeTransfer.asm

    r267 r294  
    6464;       AH:     BIOS Error code
    6565;       CX:     Number of successfully transferred sectors
    66 ;       CF:     0 if transfer succesfull
     66;       CF:     0 if transfer successful
    6767;               1 if any error
    6868;   Corrupts registers:
    … …  
    125125;       AH:     BIOS Error code
    126126;       CX:     Number of successfully transferred sectors
    127 ;       CF:     0 if transfer succesfull
     127;       CF:     0 if transfer successful
    128128;               1 if any error
    129129;   Corrupts registers:

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h.asm

    r277 r294  
    2626
    2727    call    RamVars_GetSegmentToDS
    28        
     28
    2929    call    DriveXlate_ToOrBack
    3030    mov     [RAMVARS.xlateVars+XLATEVARS.bXlatedDrv], dl
    31        
     31
    3232    call    FindDPT_ForDriveNumberInDL              ; DS:DI points to our DPT, or NULL if not our drive
    3333    jnc     SHORT .OurFunction                      ; DPT found, this is one of our drives, and thus our function
    3434
    35     cmp     ah, 0
    36     jz      short .OurFunction                      ; we handle all function 0h requests (resets)
     35    test    ah, ah
     36    jz      SHORT .OurFunction                      ; we handle all function 0h requests (resets)
    3737    cmp     ah, 8
    38     jnz     SHORT Int13h_DirectCallToAnotherBios    ; non-8h function, handled by foreign bios
     38    jne     SHORT Int13h_DirectCallToAnotherBios    ; non-8h function, handled by foreign bios
    3939
    4040%ifndef MODULE_SERIAL_FLOPPY
    41 ; With floppy support, we handle all traffic for function 08h, as we need to wrap both hard disk and 
    42 ; floppy drive counts.  Without floppy support, we handle only hard disk traffic for function 08h, 
     41; With floppy support, we handle all traffic for function 08h, as we need to wrap both hard disk and
     42; floppy drive counts.  Without floppy support, we handle only hard disk traffic for function 08h,
    4343; and thus need the check below.
    4444;
    45     test    dl, dl                             
     45    test    dl, dl
    4646    jns     SHORT Int13h_DirectCallToAnotherBios
    47 %endif     
    48                
    49 .OurFunction:   
     47%endif
     48
     49.OurFunction:
    5050    ; Jump to correct BIOS function
    5151    eMOVZX  bx, ah
    … …  
    141141    test    dl, dl
    142142    js      short Int13h_UnsupportedFunction
    143     mov     ah, 0
     143    xor     ah, ah
    144144    jmp     short Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
    145145%endif
    … …  
    172172%ifdef MODULE_SERIAL_FLOPPY
    173173    mov     al, [bp+IDEPACK.intpack+INTPACK.dl]
    174 Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH_ALHasDriveNumber:   
     174Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH_ALHasDriveNumber:
    175175    call    Int13h_SetErrorCodeToBdaAndToIntpackInSSBPfromAH_ALHasDriveNumber
    176176%else
    … …  
    191191;   Returns:
    192192;       Depends on function
    193 ;       NOTE: ES:DI needs to be returned from the previous interrupt 
     193;       NOTE: ES:DI needs to be returned from the previous interrupt
    194194;             handler, for floppy DPT in function 08h
    195195;   Corrupts registers:
    … …  
    251251.HardDisk:
    252252    LOAD_BDA_SEGMENT_TO ds, di
    253     mov     [bx], ah       
     253    mov     [bx], ah
    254254%else
    255255Int13h_SetErrorCodeToBdaAndToIntpackInSSBPfromAH:
    256256    ; Store error code to BDA
    257     LOAD_BDA_SEGMENT_TO ds, di     
     257    LOAD_BDA_SEGMENT_TO ds, di
    258258    mov     [BDA.bHDLastSt], ah
    259259%endif

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH0h_HReset.asm

    r282 r294  
    1919;   Returns with INTPACK:
    2020;       AH:     Int 13h return status (from drive requested in DL)
    21 ;       CF:     0 if succesfull, 1 if error
     21;       CF:     0 if successful, 1 if error
    2222;--------------------------------------------------------------------
    2323ALIGN JUMP_ALIGN
    … …  
    2828%ifdef MODULE_SERIAL_FLOPPY
    2929;
    30 ; "Reset" emulatd serial floppy drives, if any.  There is nothing to actually do for this reset,
     30; "Reset" emulated serial floppy drives, if any.  There is nothing to actually do for this reset,
    3131; but record the proper error return code if one of these floppy drives is the drive requested.
    3232;
    … …  
    3939
    4040    adc     dl, al                                      ; second drive (CF set) if present
    41                                                         ; If no drive is present, this will result in ffh which 
     41                                                        ; If no drive is present, this will result in ffh which
    4242                                                        ; won't match a drive
    4343    call    BackupErrorCodeFromTheRequestedDriveToBH
    … …  
    4848    test    bl, bl                                      ; If we were called with a floppy disk, then we are done,
    4949    jns     SHORT .SkipHardDiskReset                    ; don't do hard disks.
    50        
     50
    5151    call    ResetForeignHardDisks
    5252
    53     ; Resetting our hard disks will modify dl and bl to be idevars offset based instead of drive number based, 
     53    ; Resetting our hard disks will modify dl and bl to be idevars offset based instead of drive number based,
    5454    ; such that this call must be the last in the list of reset routines called.
    5555    ;
    … …  
    5757    ; and we need to override that value if we are xlate'd into 80h with one of our drives.
    5858    ;
    59     call    ResetHardDisksHandledByOurBIOS         
     59    call    ResetHardDisksHandledByOurBIOS
    6060
    6161.SkipHardDiskReset:
    … …  
    139139;   Parameters:
    140140;       DS:DI:  Ptr to DPT for requested drive
    141 ;               If DPT pointer is not available, or error result in BH won't be used anyway, 
     141;               If DPT pointer is not available, or error result in BH won't be used anyway,
    142142;               enter through .ErrorCodeNotUsed.
    143143;       SS:BP:  Ptr to IDEPACK
    … …  
    148148;--------------------------------------------------------------------
    149149ResetHardDisksHandledByOurBIOS:
    150     mov     bl, 0                                       ; Assume Null IdevarsOffset for now, assuming foreign drive
     150    xor     bl, bl                                      ; Assume Null IdevarsOffset for now, assuming foreign drive
    151151    test    di, di
    152152    jz      .ErrorCodeNotUsed
    153153    mov     bl, [di+DPT.bIdevarsOffset]                 ; replace drive number with Idevars pointer for cmp with dl
    154        
    155 .ErrorCodeNotUsed:                                      ; BH will be garbage on exit if thie entry point is used,
     154
     155.ErrorCodeNotUsed:                                      ; BH will be garbage on exit if this entry point is used,
    156156                                                        ; but reset of all drives will still happen
    157157

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH10h_HReady.asm

    r150 r294  
    1515;   Returns with INTPACK:
    1616;       AH:     Int 13h return status
    17 ;       CF:     0 if succesfull, 1 if error
     17;       CF:     0 if successful, 1 if error
    1818;--------------------------------------------------------------------
    1919ALIGN JUMP_ALIGN

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH11h_HRecal.asm

    r162 r294  
    1515;   Returns with INTPACK:
    1616;       AH:     BIOS Error code
    17 ;       CF:     0 if succesfull, 1 if error
     17;       CF:     0 if successful, 1 if error
    1818;--------------------------------------------------------------------
    1919ALIGN JUMP_ALIGN
    … …  
    3535;   Returns:
    3636;       AH:     BIOS Error code
    37 ;       CF:     0 if succesfull, 1 if error
     37;       CF:     0 if successful, 1 if error
    3838;   Corrupts registers:
    3939;       AL, BX, CX, DX

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH15h_HSize.asm

    r285 r294  
    1414;       SS:BP:  Ptr to IDEPACK
    1515;   Returns with INTPACK:
    16 ;       If succesfull:
     16;       If successful:
    1717;           AH:     Hard Disk: 3 (Hard disk accessible)
    1818;                   Floppy:    1 (Floppy disk, without change detection)
    … …  
    2828%ifdef MODULE_SERIAL_FLOPPY
    2929    mov     cl, 1                                       ; 1 = floppy disk, no change detection
    30                
    31     test    dl,dl                                       ; DO NOT store the sector count if this is a 
    32     jns     .FloppyDrive                                ; floppy disk, some OS's depend on this not 
     30
     31    test    dl,dl                                       ; DO NOT store the sector count if this is a
     32    jns     .FloppyDrive                                ; floppy disk, some OS's depend on this not
    3333                                                        ; happening for floppies in order to boot.
    3434%endif
    35        
     35
    3636    call    AH15h_GetSectorCountToBXDXAX
    3737    mov     [bp+IDEPACK.intpack+INTPACK.cx], dx         ; HIWORD to CX
    3838    xchg    [bp+IDEPACK.intpack+INTPACK.dx], ax         ; LOWORD to DX, AL gets drive number
    3939
    40     xor     ah, ah     
    41 %ifdef MODULE_SERIAL_FLOPPY             
     40    xor     ah, ah
     41%ifdef MODULE_SERIAL_FLOPPY
    4242    mov     cl, 3                                       ; 3 = Hard Disk Accessible
    4343.FloppyDrive:
    44        
    45     call    Int13h_SetErrorCodeToBdaAndToIntpackInSSBPfromAH_ALHasDriveNumber   ; Store success to BDA and CF       
    46     mov     BYTE [bp+IDEPACK.intpack+INTPACK.ah], cl
     44
     45    call    Int13h_SetErrorCodeToBdaAndToIntpackInSSBPfromAH_ALHasDriveNumber   ; Store success to BDA and CF
     46    mov     [bp+IDEPACK.intpack+INTPACK.ah], cl
    4747%else
    48     call    Int13h_SetErrorCodeToBdaAndToIntpackInSSBPfromAH    ; Store success to BDA and CF       
     48    call    Int13h_SetErrorCodeToBdaAndToIntpackInSSBPfromAH    ; Store success to BDA and CF
    4949    mov     BYTE [bp+IDEPACK.intpack+INTPACK.ah], 3
    50 %endif     
    51        
     50%endif
     51
    5252    jmp     Int13h_ReturnFromHandlerWithoutStoringErrorCode
    5353

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH1h_HStatus.asm

    r258 r294  
    2323%ifdef MODULE_SERIAL_FLOPPY
    2424    test    dl, dl
    25     jns     .HardDisk
    26     mov     ah, [BDA.bFDRetST]      ; Unlike for hard disks below, floppy version does not clear the status
     25    js      .HardDisk
     26    mov     ah, [BDA.bFDRetST]  ; Unlike for hard disks below, floppy version does not clear the status
    2727    jmp     .done
    28 .HardDisk: 
     28.HardDisk:
    2929%endif
    30        
    31     xchg    ah, [BDA.bHDLastSt]     ; Load and clear last error
    32                                     ; Note that AH is cleared with the LOAD_BDA_SEGMENT above
    33                
     30
     31    xchg    ah, [BDA.bHDLastSt] ; Load and clear last error (AH is cleared with the LOAD_BDA_SEGMENT_TO above)
     32
    3433.done:
     34%ifndef USE_186
    3535    call    Int13h_SetErrorCodeToIntpackInSSBPfromAH
    3636    jmp     Int13h_ReturnFromHandlerWithoutStoringErrorCode
     37%else
     38    push    Int13h_ReturnFromHandlerWithoutStoringErrorCode
     39    jmp     Int13h_SetErrorCodeToIntpackInSSBPfromAH
     40%endif

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH23h_HFeatures.asm

    r170 r294  
    2424;   Returns with INTPACK:
    2525;       AH:     Int 13h return status
    26 ;       CF:     0 if succesfull, 1 if error
     26;       CF:     0 if successful, 1 if error
    2727;--------------------------------------------------------------------
    2828ALIGN JUMP_ALIGN
    … …  
    5151;   Returns:
    5252;       AH:     Int 13h return status
    53 ;       CF:     0 if succesfull, 1 if error
     53;       CF:     0 if successful, 1 if error
    5454;   Corrupts registers:
    5555;       AL, BX, CX, DX

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH24h_HSetBlocks.asm

    r232 r294  
    1818;   Returns with INTPACK:
    1919;       AH:     Int 13h return status
    20 ;       CF:     0 if succesfull, 1 if error
     20;       CF:     0 if successful, 1 if error
    2121;--------------------------------------------------------------------
    2222AH24h_HandlerForSetMultipleBlocks:
    … …  
    3838;   Returns:
    3939;       AH:     Int 13h return status
    40 ;       CF:     0 if succesfull, 1 if error
     40;       CF:     0 if successful, 1 if error
    4141;   Corrupts registers:
    4242;       AL, BX, CX, DX

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH25h_HDrvID.asm

    r221 r294  
    1818;   Returns with INTPACK:
    1919;       AH:     Int 13h return status
    20 ;       CF:     0 if succesfull, 1 if error
     20;       CF:     0 if successful, 1 if error
    2121;--------------------------------------------------------------------
    2222ALIGN JUMP_ALIGN
    … …  
    4040;   Returns with INTPACK:
    4141;       AH:     Int 13h return status
    42 ;       CF:     0 if succesfull, 1 if error
     42;       CF:     0 if successful, 1 if error
    4343;   Corrupts registers:
    4444;       AL, BX, CX, DX
    … …  
    5353    call    AccessDPT_GetDriveSelectByteToAL
    5454    mov     bh, al
    55     eMOVZX  ax, BYTE [di+DPT.bIdevarsOffset]
     55    eMOVZX  ax, [di+DPT.bIdevarsOffset]
    5656    xchg    bp, ax
    5757    call    Device_IdentifyToBufferInESSIwithDriveSelectByteInBH

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH2h_HRead.asm

    r258 r294  
    2020;               Bits 5...0: Starting sector number (1...63)
    2121;       DH:     Starting head number (0...255)
    22 ;       ES:BX:  Pointer to buffer recieving data
     22;       ES:BX:  Pointer to buffer receiving data
    2323;   Returns with INTPACK:
    2424;       AH:     Int 13h/40h floppy return status
    2525;       AL:     Burst error length if AH returns 11h (we never return error code 11h)
    2626;               Number of sectors actually read (only valid if CF set for someBIOSes)
    27 ;       CF:     0 if successfull, 1 if error
     27;       CF:     0 if successful, 1 if error
    2828;--------------------------------------------------------------------
    2929ALIGN JUMP_ALIGN

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH3h_HWrite.asm

    r249 r294  
    2424;       AH:     Int 13h/40h floppy return status
    2525;       AL:     Number of sectors actually written (only valid if CF set for someBIOSes)
    26 ;       CF:     0 if successfull, 1 if error
     26;       CF:     0 if successful, 1 if error
    2727;--------------------------------------------------------------------
    2828ALIGN JUMP_ALIGN

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH4h_HVerify.asm

    r249 r294  
    2323;       AH:     Int 13h/40h floppy return status
    2424;       AL:     Number of sectors actually verified (only valid if CF set for someBIOSes)
    25 ;       CF:     0 if successfull, 1 if error
     25;       CF:     0 if successful, 1 if error
    2626;--------------------------------------------------------------------
    2727ALIGN JUMP_ALIGN

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH8h_HParams.asm

    r285 r294  
    2222;       ES:DI:  Floppy DPT (for floppies only)
    2323;       AH:     Int 13h/40h floppy return status
    24 ;       CF:     0 if successfull, 1 if error
     24;       CF:     0 if successful, 1 if error
    2525;--------------------------------------------------------------------
    2626AH8h_HandlerForReadDiskDriveParameters:
    … …  
    3131    jnc     SHORT .MidGame
    3232    jmp     Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
    33        
    34 .OurDrive:     
     33
     34.OurDrive:
    3535    call    AH8h_GetDriveParameters
    3636
    … …  
    4141%endif
    4242    ;; fall-through
    43        
    44 .MidGame:       
     43
     44.MidGame:
    4545    call    RamVars_GetCountOfKnownDrivesToAX       ; assume hard disk for now, will discard if for floppies
    4646
    4747    test    byte [bp+IDEPACK.intpack+INTPACK.dl], 080h
    4848    jnz     .Done
    49        
     49
    5050    mov     [bp+IDEPACK.intpack+INTPACK.bl], bl
    5151
    5252    mov     [bp+IDEPACK.intpack+INTPACK.es], es
    53     mov     [bp+IDEPACK.intpack+INTPACK.di], di     
     53    mov     [bp+IDEPACK.intpack+INTPACK.di], di
    5454
    5555    call    FloppyDrive_GetCountToAX
    5656
    57 .Done: 
     57.Done:
    5858    mov     ah, dh
    59        
     59
    6060    mov     [bp+IDEPACK.intpack+INTPACK.cx], cx
    6161    xchg    [bp+IDEPACK.intpack+INTPACK.dx], ax     ; recover DL for BDA last status byte determination
    … …  
    6363    xor     ah, ah
    6464%ifdef MODULE_SERIAL_FLOPPY
    65     jmp     Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH_ALHasDriveNumber           
     65    jmp     Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH_ALHasDriveNumber
    6666%else
    6767    jmp     Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
    … …  
    118118    eSHR_IM bl,FLGH_DPT_SERIAL_FLOPPY_TYPE_FIELD_POSITION
    119119%endif
    120 %endif     
     120%endif
    121121    ret
    122122
    … …  
    127127; So we return fixed values out of the ROM for callers who might be expecting this information.
    128128;
    129 ; On AT systems, we return the information for a 1.44 MB disk, 
     129; On AT systems, we return the information for a 1.44 MB disk,
    130130; and on XT systems, we return the information for a 360 KB disk.
    131131;
    … …  
    138138
    139139    db      1h << 1 | 0             ; Offset 1: Typical values of 1 for head load time
    140                                     ;           DMA used (although it actually is not, but is more restrctive)
    141     db      25h                     ; Offset 2: Inactiviy motor turn-off delay,
     140                                    ;           DMA used (although it actually is not, but is more restrictive)
     141    db      25h                     ; Offset 2: Inactivity motor turn-off delay,
    142142                                    ;           Typical value of 25h for 2 second delay
    143143    db      02h                     ; Offset 3: Sector size, always 512
    … …  
    161161    db      0f6h                    ; Offset 8: Fill byte for format
    162162    db      0fh                     ; Offset 9: Head setting time
    163     db      08h                     ; Offset A: Wait for motor startpu time
     163    db      08h                     ; Offset A: Wait for motor startup time
    164164
    165165%ifdef USE_AT

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH9h_HInit.asm

    r279 r294  
    1515;   Returns with INTPACK:
    1616;       AH:     Int 13h return status
    17 ;       CF:     0 if succesfull, 1 if error
     17;       CF:     0 if successful, 1 if error
    1818;--------------------------------------------------------------------
    1919AH9h_HandlerForInitializeDriveParameters:
    … …  
    3636;   Returns:
    3737;       AH:     Int 13h return status
    38 ;       CF:     0 if succesfull, 1 if error
     38;       CF:     0 if successful, 1 if error
    3939;   Corrupts registers:
    4040;       AL, BX, DX
    … …  
    4545
    4646%ifdef MODULE_SERIAL
    47     ; 
    48     ; no need to do this for serial deveices, and we use the DPT_RESET flag bits
     47    ;
     48    ; no need to do this for serial devices, and we use the DPT_RESET flag bits
    4949    ; to store the drive type for serial floppy drives (MODULE_SERIAL_FLOPPY)
    5050    ;
    5151    xor     ah, ah
    5252    test    byte [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE    ; Clears CF
    53     jnz     .ReturnNotSuccessfull
     53    jnz     .ReturnNotSuccessful
    5454%endif
    55        
     55
    5656    ; Try to select drive and wait until ready
    5757    or      BYTE [di+DPT.bFlagsHigh], MASKH_DPT_RESET       ; Everything uninitialized
    … …  
    5959    mov     [bp+IDEPACK.bDrvAndHead], al
    6060    call    Device_SelectDrive
    61     jc      SHORT .ReturnNotSuccessfull
     61    jc      SHORT .ReturnNotSuccessful
    6262    and     BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nDRDY ; Clear since success
    6363
    … …  
    8080.InitializeBlockMode:
    8181    call    InitializeBlockMode
    82     jc      SHORT .ReturnNotSuccessfull
     82    jc      SHORT .ReturnNotSuccessful
    8383    and     BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nSETBLOCK ; Keeps CF clear
    8484
    85 .ReturnNotSuccessfull:
     85.ReturnNotSuccessful:
    8686    pop     cx
    8787    pop     si
    … …  
    9696;   Returns:
    9797;       AH:     BIOS Error code
    98 ;       CF:     Cleared if succesfull
     98;       CF:     Cleared if successful
    9999;               Set if any error
    100100;   Corrupts registers:
    … …  
    121121;   Returns:
    122122;       AH:     BIOS Error code
    123 ;       CF:     Cleared if succesfull
     123;       CF:     Cleared if successful
    124124;               Set if any error
    125125;   Corrupts registers:
    … …  
    146146;   Returns:
    147147;       AH:     BIOS Error code
    148 ;       CF:     Cleared if succesfull
     148;       CF:     Cleared if successful
    149149;               Set if any error
    150150;   Corrupts registers:

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AHCh_HSeek.asm

    r162 r294  
    2121;   Returns with INTPACK:
    2222;       AH:     BIOS Error code
    23 ;       CF:     0 if succesfull, 1 if error
     23;       CF:     0 if successful, 1 if error
    2424;--------------------------------------------------------------------
    2525ALIGN JUMP_ALIGN
    … …  
    4444;   Returns:
    4545;       AH:     BIOS Error code
    46 ;       CF:     0 if succesfull, 1 if error
     46;       CF:     0 if successful, 1 if error
    4747;   Corrupts registers:
    4848;       AL, BX, CX, DX

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AHDh_HReset.asm

    r282 r294  
    1515;   Returns with INTPACK:
    1616;       AH:     Int 13h return status
    17 ;       CF:     0 if succesfull, 1 if error
     17;       CF:     0 if successful, 1 if error
    1818;--------------------------------------------------------------------
    1919ALIGN JUMP_ALIGN
    … …  
    3737;   Returns:
    3838;       AH:     Int 13h return status
    39 ;       CF:     0 if succesfull, 1 if error
     39;       CF:     0 if successful, 1 if error
    4040;   Corrupts registers:
    4141;       AL, SI
    … …  
    5353
    5454    ; Initialize Master and Slave drives
    55     mov     al, [di+DPT.bIdevarsOffset]         ; pointer to controller we are looking to reset
    56     mov     ah, 0                               ; initialize error code, assume success
    57        
     55    eMOVZX  ax, [di+DPT.bIdevarsOffset]         ; (AL) pointer to controller we are looking to reset
     56                                                ; (AH) initialize error code, assume success
     57
    5858    mov     si, IterateAndResetDrives
    5959    call    FindDPT_IterateAllDPTs
    … …  
    7070; IterateAndResetDrives: Iteration routine for use with IterateAllDPTs.
    7171;
    72 ; When a drive on the controller is found, it is reset, and the error code 
     72; When a drive on the controller is found, it is reset, and the error code
    7373; merged into overall error code for this controller.  Master will be reset
    7474; first.  Note that the iteration will go until the end of the DPT list.
    … …  
    7979    push    ax
    8080    call    AH9h_InitializeDriveForUse          ; Reset Master and Slave (Master will come first in DPT list)
    81     pop     ax     
     81    pop     ax
    8282    jnc     .done
    8383    or      ah, (RET_HD_RESETFAIL << 1) | 1     ; OR in Reset Failed error code and CF, will SHR into position later

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/EBIOS/AH41h_CheckIfExtensionsPresent.asm

    r167 r294  
    1919;       BX:     AA55h
    2020;       CX:     Support bits
    21 ;       CF:     0 if succesfull, 1 if error
     21;       CF:     0 if successful, 1 if error
    2222;--------------------------------------------------------------------
    2323ALIGN JUMP_ALIGN

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/EBIOS/AH42h_ExtendedReadSectors.asm

    r249 r294  
    1818;   Returns with INTPACK:
    1919;       AH:     Int 13h return status
    20 ;       CF:     0 if succesfull, 1 if error
     20;       CF:     0 if successful, 1 if error
    2121;   Return with Disk Address Packet in INTPACK:
    2222;       .wSectorCount   Number of sectors read successfully

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/EBIOS/AH43h_ExtendedWriteSectors.asm

    r249 r294  
    2020;   Returns with INTPACK:
    2121;       AH:     Int 13h return status
    22 ;       CF:     0 if succesfull, 1 if error
     22;       CF:     0 if successful, 1 if error
    2323;   Return with Disk Address Packet in INTPACK:
    2424;       .wSectorCount   Number of sectors written successfully

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/EBIOS/AH44h_ExtendedVerifySectors.asm

    r249 r294  
    1818;   Returns with INTPACK:
    1919;       AH:     Int 13h return status
    20 ;       CF:     0 if succesfull, 1 if error
     20;       CF:     0 if successful, 1 if error
    2121;   Return with Disk Address Packet in INTPACK:
    2222;       .wSectorCount   Number of sectors verified successfully

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/EBIOS/AH47h_ExtendedSeek.asm

    r249 r294  
    1818;   Returns with INTPACK:
    1919;       AH:     Int 13h return status
    20 ;       CF:     0 if succesfull, 1 if error
     20;       CF:     0 if successful, 1 if error
    2121;--------------------------------------------------------------------
    2222ALIGN JUMP_ALIGN

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/EBIOS/AH48h_GetExtendedDriveParameters.asm

    r230 r294  
    1919;       AH:     Int 13h return status
    2020;       DS:SI:  Ptr to Extended Drive Information Table
    21 ;       CF:     0 if succesfull, 1 if error
     21;       CF:     0 if successful, 1 if error
    2222;--------------------------------------------------------------------
    2323AH48h_HandlerForGetExtendedDriveParameters:

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/Tools/Address.asm

    r230 r294  
    128128ConvertLCHStoLBARegisterValues:
    129129    ; cylToSeek*headsPerCyl (18-bit result)
    130     mov     ax, cx                  ; Copy Cylinder number to AX
    131     ; We could save a byte here by using CWD instead of the XOR DH, DH in eMOVZX
    132     ; but I'm not sure how that would affect speed.
     130    mov     ax, LBA_ASSIST_SPT      ; Load Sectors per Track
     131    xchg    cx, ax                  ; Cylinder number to AX, Sectors per Track to CX
    133132
    134     eMOVZX  dx, BYTE [di+DPT.bLbaHeads]
     133%ifdef USE_386
     134    movzx   dx, [di+DPT.bLbaHeads]
     135%else
     136    cwd
     137    mov     dl, [di+DPT.bLbaHeads]
     138%endif
    135139    mul     dx                      ; DX:AX = cylToSeek*headsPerCyl
    136140
    … …  
    141145
    142146    ; *=sectPerTrack (18-bit by 6-bit multiplication with 24-bit result)
    143     mov     cx, LBA_ASSIST_SPT      ; Load Sectors per Track
    144147    xchg    ax, dx                  ; Hiword to AX, loword to DX
    145148    mul     cl                      ; AX = hiword * Sectors per Track

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/Tools/Prepare.asm

    r221 r294  
    3434    cmp     ax, BYTE 127
    3535    ja      SHORT InvalidNumberOfSectorsRequested
    36     ; Fall to GetEbiosCommandIndexToBX
    3736
    38 ;--------------------------------------------------------------------
    39 ; GetEbiosCommandIndexToBX
    40 ;   Parameters:
    41 ;       DS:DI:  Ptr to DPT
    42 ;       ES:SI:  Ptr to DAP (Disk Address Packet)
    43 ;   Returns:
    44 ;       BX:     Index to command lookup table
    45 ;   Corrupts registers:
    46 ;       AX, DX
    47 ;--------------------------------------------------------------------
    48 GetEbiosCommandIndexToBX:
     37    ; Get EBIOS command index to BX
    4938    ; LBA28 or LBA48 command
    50     xor     dx, dx
     39    cwd
    5140    mov     al, [es:si+DAP.qwLBA+3] ; Load LBA48 byte 3 (bits 24...31)
    52     and     ax, 00F0h               ; Clear LBA28 bits 24...27
     41    and     al, 0F0h                ; Clear LBA28 bits 24...27
    5342    or      ax, [es:si+DAP.qwLBA+4] ; Set bits from LBA bytes 4 and 5
    5443    cmp     dx, ax                  ; Set CF if any of bits 28...47 set

  • trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectDrives.asm

    r269 r294  
    2626    mov     cx, g_szDetectMaster
    2727    mov     bh, MASK_DRVNHEAD_SET                               ; Select Master drive
    28     call    StartDetectionWithDriveSelectByteInBHandStringInAX  ; Detect and create DPT + BOOTNFO
     28    call    StartDetectionWithDriveSelectByteInBHandStringInCX  ; Detect and create DPT + BOOTNFO
    2929
    3030    mov     cx, g_szDetectSlave
    3131    mov     bh, MASK_DRVNHEAD_SET | FLG_DRVNHEAD_DRV
    32     call    StartDetectionWithDriveSelectByteInBHandStringInAX
     32    call    StartDetectionWithDriveSelectByteInBHandStringInCX
    3333
    3434    pop     cx
    … …  
    7272    mov     al, [es:BDA.bHDCount]
    7373    add     cl, al                      ; Add our drives to the system count
    74     mov     [es:BDA.bHDCount], cl       
    75     or      al, 80h                     ; Or in hard disk flag     
    76     mov     [RAMVARS.bFirstDrv], al     ; Store first drive number     
    77 
    78 .AddFloppies:       
    79 %ifdef MODULE_SERIAL_FLOPPY     
     74    mov     [es:BDA.bHDCount], cl
     75    or      al, 80h                     ; Or in hard disk flag
     76    mov     [RAMVARS.bFirstDrv], al     ; Store first drive number
     77
     78.AddFloppies:
     79%ifdef MODULE_SERIAL_FLOPPY
    8080;----------------------------------------------------------------------
    8181;
    … …  
    8484    dec     ch
    8585    mov     al, ch
    86     js      .NoFloppies                     ; if no drives are present, we store 0ffh       
     86    js      .NoFloppies                     ; if no drives are present, we store 0ffh
    8787
    8888    call    FloppyDrive_GetCountFromBIOS_or_BDA
    … …  
    9292    add     al, ch                          ; Add our drives to existing drive count
    9393    cmp     al, 3                           ; For BDA, max out at 4 drives (ours is zero based)
    94     jl      .MaxBDAFloppiesExceeded
    95     mov     al, 3                           
     94    jb      .MaxBDAFloppiesExceeded
     95    mov     al, 3
    9696.MaxBDAFloppiesExceeded:
    9797    eROR_IM al, 2                           ; move to bits 6-7
    9898    inc     ax                              ; low order bit, indicating floppy drive exists
    9999
    100     mov     ah, [es:BDA.wEquipment]         ; Load Equipment WORD low byte 
     100    mov     ah, [es:BDA.wEquipment]         ; Load Equipment WORD low byte
    101101    and     ah, 03eh                        ; Mask off drive number and drives present bit
    102102    or      al, ah                          ; Or in new values
    … …  
    111111    shr     ch, 1                           ; number of drives, 1 or 2 only, to CF flag (clear=1, set=2)
    112112    rcl     al, 1                           ; starting drive number in upper 7 bits, number of drives in low bit
    113 .NoFloppies:   
     113.NoFloppies:
    114114    mov     [RAMVARS.xlateVars+XLATEVARS.bFlopCntAndFirst], al
    115115%endif
    116        
     116
    117117    ret
    118118
    119 %ifndef CHECK_FOR_UNUSED_ENTRYPOINTS       
     119%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
    120120    %if FLG_ROMVARS_SERIAL_SCANDETECT != 8
    121121        %error "DetectDrives is currently coded to assume that FLG_ROMVARS_SERIAL_SCANDETECT is the same bit as the ALT key code in the BDA.  Changes in the code will be needed if these values are no longer the same."
    … …  
    125125
    126126;--------------------------------------------------------------------
    127 ; StartDetectionWithDriveSelectByteInBHandStringInAX
     127; StartDetectionWithDriveSelectByteInBHandStringInCX
    128128;   Parameters:
    129129;       BH:     Drive Select byte for Drive and Head Register
    … …  
    137137;       AX, BX, CX, DX, SI, DI
    138138;--------------------------------------------------------------------
    139 StartDetectionWithDriveSelectByteInBHandStringInAX:
    140     call    DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP
     139StartDetectionWithDriveSelectByteInBHandStringInCX:
     140    call    DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
    141141    ; Fall to .ReadAtaInfoFromHardDisk
    142142

  • trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectPrint.asm

    r285 r294  
    2828
    2929;--------------------------------------------------------------------
    30 ; DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP
     30; DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
    3131;   Parameters:
    3232;       CS:CX:  Ptr to "Master" or "Slave" string
    … …  
    3838;       AX, SI, DI, CX
    3939;--------------------------------------------------------------------
    40 DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP:
     40DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP:
    4141    mov     ax, [cs:bp+IDEVARS.wPort]       ; for IDE: AX=port address, DH=.bDevice
    4242    mov     dx, [cs:bp+IDEVARS.bDevice-1]   ; for Serial: AL=port address>>2, AH=baud rate
    … …  
    4848
    4949    mov     si, g_szDetectOuter             ; Load SI with default wrapper string "IDE %s at %s: "
    50        
     50
    5151    push    bp                              ; setup stack for call to
    5252    mov     bp, sp                          ; BootMenuPrint_FormatCSSIfromParamsInSSBP
    … …  
    9898    mov     cl, (g_szDetectCOMSmall-$$) & 0xff  ; Setup secondary print string for "COMn/XXy00"
    9999
    100 .pushAndPrintSerial:   
     100.pushAndPrintSerial:
    101101    mov     si, g_szDetectOuterSerial       ; Finally load SI with wrapper string "Serial %s on %s: "
    102102
    103103.pushAndPrint:
    104104%endif
    105        
     105
    106106    push    cx                              ; Push print string
    107107    push    ax                              ; Push high order digits, or port address, or N/A

  • trunk/XTIDE_Universal_BIOS/Src/Initialization/DriveXlate.asm

    r248 r294  
    3939SwapFloppyDriveOrHardDisk:
    4040    mov     ah, 80h                 ; Assume hard disk
    41     mov     al, BYTE [RAMVARS.xlateVars+XLATEVARS.bHDSwap]
     41    mov     al, [RAMVARS.xlateVars+XLATEVARS.bHDSwap]
    4242    test    dl, ah                  ; Hard disk?
    4343    jnz     SHORT SwapDrive         ; If so, jump to swap
    44     mov     al, BYTE [RAMVARS.xlateVars+XLATEVARS.bFDSwap]
     44    mov     al, [RAMVARS.xlateVars+XLATEVARS.bFDSwap]
    4545    cbw
    4646    ; Fall to SwapDrive

  • trunk/XTIDE_Universal_BIOS/Src/Initialization/FloppyDrive.asm

    r274 r294  
    127127;--------------------------------------------------------------------
    128128ALIGN JUMP_ALIGN
    129 FloppyDrive_GetCountToAX:       
     129FloppyDrive_GetCountToAX:
    130130%ifdef MODULE_SERIAL_FLOPPY
    131131    call    RamVars_UnpackFlopCntAndFirstToAL
    132132    js      .UseBIOSorBDA               ; We didn't add in any drives, counts here are not valid
    133        
    134     adc     al,1                        ; adds in the drive count bit, and adds 1 for count vs. 0-index, 
     133
     134    adc     al,1                        ; adds in the drive count bit, and adds 1 for count vs. 0-index,
    135135    jmp     .FinishCalc                 ; need to clear AH on the way out, and add in minimum drive numbers
    136136
    137 .UseBIOSorBDA: 
     137.UseBIOSorBDA:
    138138%endif
    139139    call    FloppyDrive_GetCountFromBIOS_or_BDA
    140140
    141 .FinishCalc:   
     141.FinishCalc:
    142142    mov     ah, [cs:ROMVARS.bMinFddCnt]
    143143    MAX_U   al, ah
    144144    cbw
    145        
    146     ret
    147 
    148 ALIGN JUMP_ALIGN       
     145
     146    ret
     147
     148ALIGN JUMP_ALIGN
    149149FloppyDrive_GetCountFromBIOS_or_BDA:
    150150    push    es
    … …  
    152152;--------------------------------------------------------------------
    153153; Reads Floppy Drive Count from BIOS.
    154 ; Does not work on most XT systems. Call FloppyDrive_GetCountFromBDA
     154; Does not work on most XT systems. Call .GetCountFromBDA
    155155; if this function fails.
    156156;
    157 ; GetCountFromBIOS
     157; .GetCountFromBIOS
    158158;   Parameters:
    159159;       Nothing
    160160;   Returns:
    161161;       AL:     Number of Floppy Drives
    162 ;       CF:     Cleared if successfull
     162;       CF:     Cleared if successful
    163163;               Set if BIOS function not supported
    164164;   Corrupts registers:
    … …  
    169169.GetCountFromBIOS:
    170170    push    di
    171     push    es
    172171    push    bx
    173172    push    cx
    … …  
    182181    pop     cx
    183182    pop     bx
    184     pop     es
    185183    pop     di
    186184%endif
    … …  
    188186;--------------------------------------------------------------------
    189187; Reads Floppy Drive Count (0...4) from BIOS Data Area.
    190 ; This function should be used only if FloppyDrive_GetCountFromBIOS fails.
    191 ;
    192 ; GetCountFromBDA
    193 ;   Parameters:
    194 ;       Nothing
    195 ;   Returns:
    196 ;       CL:     Number of Floppy Drives
    197 ;   Corrupts registers:
    198 ;       CH, ES
     188; This function should be used only if .GetCountFromBIOS fails.
     189;
     190; .GetCountFromBDA
     191;   Parameters:
     192;       Nothing
     193;   Returns:
     194;       AL:     Number of Floppy Drives
     195;   Corrupts registers:
     196;       AH, ES
    199197;--------------------------------------------------------------------
    200198%ifndef USE_AT
    … …  
    203201    LOAD_BDA_SEGMENT_TO es, ax
    204202    mov     al, [es:BDA.wEquipment]         ; Load Equipment WORD low byte
    205     mov     ah, al                          ; Copy it to CH
     203    mov     ah, al                          ; Copy it to AH
    206204    and     ax, 0C001h                      ; Leave bits 15..14 and 0
    207205    eROL_IM ah, 2                           ; EW low byte bits 7..6 to 1..0
    208     add     al, ah                          ; CL = Floppy Drive count
     206    add     al, ah                          ; AL = Floppy Drive count
    209207%endif
    210208
    211209    pop     es
    212210    ret
    213        

  • trunk/XTIDE_Universal_BIOS/Src/Initialization/Interrupts.asm

    r258 r294  
    6262    mov     di, ROMVARS.ideVars0            ; CS:SI points to first IDEVARS
    6363.IdeControllerLoop:
    64     mov     al, BYTE [cs:di+IDEVARS.bIRQ]
     64    mov     al, [cs:di+IDEVARS.bIRQ]
    6565    add     di, BYTE IDEVARS_size           ; Increment to next controller
    6666    call    .InstallLowOrHighIrqHandler
    … …  
    147147;--------------------------------------------------------------------
    148148Interrupts_UnmaskInterruptControllerForDriveInDSDI:
    149     eMOVZX  bx, BYTE [di+DPT.bIdevarsOffset]
     149    eMOVZX  bx, [di+DPT.bIdevarsOffset]
    150150    mov     al, [cs:bx+IDEVARS.bIRQ]
    151151    test    al, al

  • trunk/XTIDE_Universal_BIOS/Src/Main.asm

    r292 r294  
    1313;                   file (so no linker needed, Nasm does it all).
    1414
    15 ORG 000h                        ; Code start offset 0000h
     15    ORG 0                           ; Code start offset 0000h
    1616
    1717%define MENUEVENT_INLINE_OFFSETS    ; Only one menu required, save space and inline offsets
    … …  
    201201    %include "IdeTransfer.asm"      ; Must be included after IdeCommand.asm
    202202    %include "IdeWait.asm"
    203     %include "IdeError.asm"         ; Must be included after IdeWait.asm       
     203    %include "IdeError.asm"         ; Must be included after IdeWait.asm
    204204    %include "IdeDPT.asm"
    205205    %include "IdeIO.asm"
    … …  
    215215    %include "MemIdeTransfer.asm"   ; Must be included after IdeCommand.asm
    216216    %include "IdeWait.asm"
    217     %include "IdeError.asm"         ; Must be included after IdeWait.asm       
     217    %include "IdeError.asm"         ; Must be included after IdeWait.asm
    218218%undef IDEDEVICE
    219219%endif

  • trunk/XTIDE_Universal_BIOS/Src/Strings.asm

    r292 r294  
    2929%endif
    3030
    31 ; The following strings are used by DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP
     31; The following strings are used by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
    3232; To support an optimization in that code, these strings must start on the same 256 byte page,
    3333; which is checked at assembly time below.
    … …  
    4949%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
    5050    %if ((g_szDetectEnd-$$) & 0xff00) <> ((g_szDetectStart-$$) & 0xff00)
    51         %error "g_szDetect* strings must start on the same 256 byte page, required by DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP.  Please move this block up or down within strings.asm"
     51        %error "g_szDetect* strings must start on the same 256 byte page, required by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP.  Please move this block up or down within strings.asm"
    5252    %endif
    5353%endif

  • trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/CreateDPT.asm

    r262 r294  
    1818;   Returns:
    1919;       DL:     Drive number for new drive
    20 ;       DS:DI:  Ptr to Disk Parameter Table (if succesfull)
     20;       DS:DI:  Ptr to Disk Parameter Table (if successful)
    2121;       CF:     Cleared if DPT created successfully
    2222;               Set if any error
    … …  
    202202;----------------------------------------------------------------------
    203203; Update drive counts (hard and floppy)
    204 ;---------------------------------------------------------------------- 
    205        
     204;----------------------------------------------------------------------
     205
    206206%ifdef MODULE_SERIAL_FLOPPY
    207207;
    208208; These two instructions serve two purposes:
    209209; 1. If the drive is a floppy drive (CF set), then we effectively increment the counter.
    210 ; 2. If this is a hard disk, and there have been any floppy drives previously added, then the hard disk is 
     210; 2. If this is a hard disk, and there have been any floppy drives previously added, then the hard disk is
    211211;    effectively discarded.  This is more of a safety check then code that should ever normally be hit (see below).
    212 ;    Since the floppy DPT's come after the hard disk DPT's, without expensive (code size) code to relocate a DPT, 
     212;    Since the floppy DPT's come after the hard disk DPT's, without expensive (code size) code to relocate a DPT,
    213213;    this was necessary.  Now, this situation shouldn't happen in normal operation, for a couple of reasons:
    214 ;       A. xtidecfg always puts configured serial ports at the end fo the IDEVARS list
     214;       A. xtidecfg always puts configured serial ports at the end of the IDEVARS list
    215215;       B. the auto serial code is always executed last
    216216;       C. the serial server always returns floppy drives last
    217217;
    218218    adc     byte [RAMVARS.xlateVars+XLATEVARS.bFlopCreateCnt], 0
    219     jnz     .AllDone   
     219    jnz     .AllDone
    220220%else
    221221;
    222222; Even without floppy support enabled, we shouldn't try to mount a floppy image as a hard disk, which
    223 ; could lead to unpredictable results since no MBR will be present, etc.  The server doesn't know that 
     223; could lead to unpredictable results since no MBR will be present, etc.  The server doesn't know that
    224224; floppies are supported, so it is important to still fail here if a floppy is seen during the drive scan.
    225225;
    … …  
    228228
    229229    inc     BYTE [RAMVARS.bDrvCnt]      ; Increment drive count to RAMVARS
    230        
    231 .AllDone:               
     230
     231.AllDone:
    232232    clc
    233233    ret

  • trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/FindDPT.asm

    r277 r294  
    88; Checks if drive is handled by this BIOS, and return DPT pointer.
    99;
    10 ; FindDPT_ForDriveNumberInDL       
     10; FindDPT_ForDriveNumberInDL
    1111;   Parameters:
    1212;       DL:     Drive number
    … …  
    2121;--------------------------------------------------------------------
    2222ALIGN JUMP_ALIGN
    23 FindDPT_ForDriveNumberInDL:     
     23FindDPT_ForDriveNumberInDL:
    2424    xchg    di, ax                              ; Save the contents of AX in DI
    2525
    26 ; 
     26;
    2727; Check Our Hard Disks
    2828;
    … …  
    3333    cmp     dl, ah                              ; Above last supported?
    3434    jae     SHORT .HardDiskNotHandledByThisBIOS
    35        
     35
    3636    cmp     dl, al                              ; Below first supported?
    3737    jae     SHORT .CalcDPTForDriveNumber
    3838
    39 ALIGN JUMP_ALIGN               
    40 .HardDiskNotHandledByThisBIOS: 
     39ALIGN JUMP_ALIGN
     40.HardDiskNotHandledByThisBIOS:
    4141;
    4242; Check Our Floppy Disks
    43 ; 
     43;
    4444    call    RamVars_UnpackFlopCntAndFirstToAL
    4545    js      SHORT .DiskIsNotHandledByThisBIOS
    46                
     46
    4747    cbw                                         ; Always 0h (no floppy drive covered above)
    4848    adc     ah, al                              ; Add in first drive number and number of drives
    … …  
    5151    jz      SHORT .CalcDPTForDriveNumber
    5252    cmp     al, dl                              ; Check first drive in all cases, redundant but OK to repeat
    53     jnz     SHORT .DiskIsNotHandledByThisBIOS           
     53    jnz     SHORT .DiskIsNotHandledByThisBIOS
    5454%else
    55     cmp     dl, ah                              ; Above last supported?     
     55    cmp     dl, ah                              ; Above last supported?
    5656    jae     SHORT .DiskIsNotHandledByThisBIOS
    57        
     57
    5858    cmp     dl, al                              ; Below first supported?
    59     jb      SHORT .DiskIsNotHandledByThisBIOS           
     59    jb      SHORT .DiskIsNotHandledByThisBIOS
    6060%endif
    6161    ; fall-through to CalcDPTForDriveNumber
    … …  
    6363;--------------------------------------------------------------------
    6464; Finds Disk Parameter Table for drive number.
    65 ; Note intended to be called except by FindDPT_ForDriveNumber
     65; Not intended to be called except by FindDPT_ForDriveNumberInDL
    6666;
    6767; CalcDPTForDriveNumber
    … …  
    6969;       DL:     Drive number
    7070;       DS:     RAMVARS segment
    71 ;       DI:     Saved copy of AX from entry at FindDPT_ForDriveNumber
     71;       DI:     Saved copy of AX from entry at FindDPT_ForDriveNumberInDL
    7272;   Returns:
    7373;       DS:DI:  Ptr to DPT
    … …  
    8282%ifdef MODULE_SERIAL_FLOPPY
    8383    mov     ax, [RAMVARS.wDrvCntAndFirst]
    84        
     84
    8585    test    dl, dl
    8686    js      .harddisk
    … …  
    8888    call    RamVars_UnpackFlopCntAndFirstToAL
    8989    add     dl, ah                      ; add in end of hard disk DPT list, floppies start immediately after
    90        
    91 ALIGN JUMP_ALIGN               
     90
     91ALIGN JUMP_ALIGN
    9292.harddisk:
    9393    sub     dl, al                      ; subtract off beginning of either hard disk or floppy list (as appropriate)
    … …  
    9696%endif
    9797
    98 .CalcDPTForNewDrive:               
     98.CalcDPTForNewDrive:
    9999    mov     al, LARGEST_DPT_SIZE
    100        
     100
    101101    mul     dl
    102     add     ax, BYTE RAMVARS_size       ; Clears CF (will not oveflow)
     102    add     ax, BYTE RAMVARS_size       ; Clears CF (will not overflow)
    103103
    104104    pop     dx
    … …  
    107107    ret
    108108
    109 ALIGN JUMP_ALIGN       
    110 .DiskIsNotHandledByThisBIOS:           
     109ALIGN JUMP_ALIGN
     110.DiskIsNotHandledByThisBIOS:
    111111;
    112112; Drive not found...
    113113;
    114114    xor     ax, ax                              ; Clear DPT pointer
    115     stc                                         ; Is not supported by our BIOS     
    116        
     115    stc                                         ; Is not supported by our BIOS
     116
    117117    xchg    di, ax                              ; Restore AX from save at top
    118118    ret
    … …  
    136136
    137137;--------------------------------------------------------------------
    138 ; Iteration routine for FindDPT_ForIdevarsOffsetInDL, 
     138; Iteration routine for FindDPT_ForIdevarsOffsetInDL,
    139139; for use with IterateAllDPTs
    140 ; 
     140;
    141141; Returns when DPT is found on the controller with Idevars offset in DL
    142142;
    … …  
    148148;               Set if wrong DPT
    149149;--------------------------------------------------------------------
    150 IterateFindFirstDPTforIdevars:     
     150IterateFindFirstDPTforIdevars:
    151151    cmp     dl, [di+DPT.bIdevarsOffset]         ; Clears CF if matched
    152152    je      .done
    153153    stc                                         ; Set CF for not found
    154 .done: 
     154.done:
    155155    ret
    156156
    … …  
    171171FindDPT_ForNewDriveToDSDI:
    172172    push    dx
    173        
     173
    174174%ifdef MODULE_SERIAL_FLOPPY
    175175    mov     dx, [RAMVARS.wDrvCntAndFlopCnt]
    … …  
    178178    mov     dl, [RAMVARS.bDrvCnt]
    179179%endif
    180        
     180
    181181    jmp     short FindDPT_ForDriveNumberInDL.CalcDPTForNewDrive
    182182
    … …  
    185185;   Parameters:
    186186;       DS:DI:  Ptr to DPT to examine
    187 ;       BL:     Bit(s) to test in DPT.bFlagsHigh 
     187;       BL:     Bit(s) to test in DPT.bFlagsHigh
    188188;   Returns:
    189189;       CF:     Clear if wanted DPT found
    … …  
    193193;--------------------------------------------------------------------
    194194ALIGN JUMP_ALIGN
    195 IterateToDptWithFlagsHighInBL:     
    196     test    BYTE [di+DPT.bFlagsHigh], bl        ; Clears CF
     195IterateToDptWithFlagsHighInBL:
     196    test    [di+DPT.bFlagsHigh], bl             ; Clears CF
    197197    jnz     SHORT .ReturnRightDPT
    198198    stc
    199 .ReturnRightDPT:       
     199.ReturnRightDPT:
    200200    ret
    201201
    … …  
    212212;--------------------------------------------------------------------
    213213%ifdef MODULE_SERIAL
    214 ALIGN JUMP_ALIGN       
    215 FindDPT_ToDSDIforSerialDevice:         
     214ALIGN JUMP_ALIGN
     215FindDPT_ToDSDIforSerialDevice:
    216216    mov     bl, FLGH_DPT_SERIAL_DEVICE
    217217; fall-through
    218218%endif
    219                
     219
    220220;--------------------------------------------------------------------
    221221; FindDPT_ToDSDIforFlagsHigh
    … …  
    231231;--------------------------------------------------------------------
    232232ALIGN JUMP_ALIGN
    233 FindDPT_ToDSDIforFlagsHighInBL:     
     233FindDPT_ToDSDIforFlagsHighInBL:
    234234    mov     si, IterateToDptWithFlagsHighInBL
    235235    ; Fall to IterateAllDPTs
    … …  
    257257
    258258    mov     di, RAMVARS_size            ; Point DS:DI to first DPT
    259        
    260     mov     cl, [RAMVARS.bDrvCnt]
    261     xor     ch, ch                      ; Clears CF 
    262        
     259    eMOVZX  cx, [RAMVARS.bDrvCnt]
    263260    jcxz    .NotFound                   ; Return if no drives
    264        
     261
    265262ALIGN JUMP_ALIGN
    266263.LoopWhileDPTsLeft:

  • trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/RamVars.asm

    r270 r294  
    125125ALIGN JUMP_ALIGN
    126126RamVars_GetHardDiskCountFromBDAtoAX:
    127     push    es
    128 
    129     LOAD_BDA_SEGMENT_TO es, ax
    130127    call    RamVars_GetCountOfKnownDrivesToAX
    131     mov     cl, [es:BDA.bHDCount]
     128    push    ds
     129    LOAD_BDA_SEGMENT_TO ds, cx
     130    mov     cl, [BDA.bHDCount]
    132131    MAX_U   al, cl
    133        
    134     pop     es
     132    pop     ds
    135133    ret
    136134
    … …  
    151149    cbw
    152150    ret
    153    
     151
    154152;--------------------------------------------------------------------
    155153; RamVars_GetIdeControllerCountToCX
    … …  
    163161ALIGN JUMP_ALIGN
    164162RamVars_GetIdeControllerCountToCX:
    165     eMOVZX  cx, BYTE [cs:ROMVARS.bIdeCnt]
     163    eMOVZX  cx, [cs:ROMVARS.bIdeCnt]
    166164    ret
    167165
    … …  
    177175;   Corrupts registers:
    178176;       Nothing
    179 ;--------------------------------------------------------------------       
     177;--------------------------------------------------------------------
    180178ALIGN JUMP_ALIGN
    181179RamVars_UnpackFlopCntAndFirstToAL:
    182180    mov     al, [RAMVARS.xlateVars+XLATEVARS.bFlopCntAndFirst]
    183     sar     al, 1       
     181    sar     al, 1
    184182    ret
    185183%endif

  • trunk/XTIDE_Universal_BIOS/makefile

    r277 r294  
    7171DEFINES_XT = ELIMINATE_CGA_SNOW MODULE_SERIAL MODULE_SERIAL_FLOPPY
    7272DEFINES_XTPLUS = ELIMINATE_CGA_SNOW USE_186 MODULE_SERIAL MODULE_SERIAL_FLOPPY
    73 DEFINES_AT = USE_186 USE_286 USE_AT MODULE_SERIAL MODULE_SERIAL_FLOPPY
     73DEFINES_AT = USE_286 USE_AT MODULE_SERIAL MODULE_SERIAL_FLOPPY
    7474DEFINES_XT_LARGE = $(DEFINES_XT) MODULE_JRIDE
    7575DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) MODULE_JRIDE
    … …  
    8787
    8888# Add -D in front of every preprocessor define declaration
    89 DEFS = $(DEFINES:%=-D%) 
     89DEFS = $(DEFINES:%=-D%)
    9090DEFS_XT = $(DEFINES_XT:%=-D%) -DROMSIZE=$(ROMSIZE)
    9191DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DROMSIZE=$(ROMSIZE)
    … …  
    132132############################################
    133133
    134 # Make clean debug and release versions
    135134all: clean small large
    136135    @echo All done!
    137136
    138137small: at xtplus xt jride_8k
    139     @echo All  8 kiB binaries built!
     138    @echo All 8 kiB binaries built!
    140139
    141140large: at_large xtplus_large xt_large
    142     @echo All 15 kiB binaries build!
     141    @echo All 15 kiB binaries built!
    143142
    144143at:
    … …  
    152151xtplus:
    153152    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
    154     @echo * 8k XT plus version "$(TARGET)_xtp.bin" built.
     153    @echo * 8k XT Plus version "$(TARGET)_xtp.bin" built.
    155154
    156155xtplus_large:
    157156    @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
    158     @echo *15k XT plus version "$(TARGET)_xtpl.bin" built.
     157    @echo *15k XT Plus version "$(TARGET)_xtpl.bin" built.
    159158
    160159xt:
    … …  
    176175    @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
    177176
    178 checksum:  all
     177checksum: all
    179178    @perl ..\tools\checksum.pl $(TARGET)_atl.bin $(ROMSIZE_LARGE)
    180179    @perl ..\tools\checksum.pl $(TARGET)_xtpl.bin $(ROMSIZE_LARGE)
Note: See TracChangeset for help on using the changeset viewer.