Changeset 258 in xtideuniversalbios for trunk/XTIDE_Universal_BIOS


Ignore:
Timestamp:
Feb 22, 2012, 7:01:53 PM (13 years ago)
Author:
gregli@…
google:author:
gregli@hotmail.com
Message:

Added floppy drive emulation over the serial connection (MODULE_SERIAL_FLOPPY). Along the way, various optimizations were made to stay within the 8K ROM size target. Also, serial code now returns the number of sectors transferred.

Location:
trunk/XTIDE_Universal_BIOS
Files:
28 edited

Legend:

Unmodified
Added
Removed

  • trunk/XTIDE_Universal_BIOS/Inc/ATA_ID.inc

    r233 r258  
    254254    .wRMSN      resw 1  ; 127F, Removable Media Status Notification feature set support
    255255    .wSecurity  resw 1  ; 128FV, Security Status
    256                 resw 159-129    ; 129...158X, Vendor Specific
    257     .wVendor    resw 1  ; 159X, Vendor Specific - picking one word for use by the Serial Port code
     256                resw 158-129    ; 129...157X, Vendor Specific
     257    .wSerialFloppyFlagAndType:
     258    .wVendor1   resw 1  ; 158x, Vendor specific - word for use by the serial port code
     259    .wSerialPortAndBaud:
     260    .wVendor2   resw 1  ; 159X, Vendor Specific - word for use by the Serial Port code
    258261    .wCFAPower  resw 1  ; 160FV, CFA Power Mode 1
    259262                resw 176-161    ; 161...175R, Reserved for assignment by the CompactFlash Association

  • trunk/XTIDE_Universal_BIOS/Inc/CustomDPT.inc

    r238 r258  
    6868MASKH_DPT_RESET                 EQU 0F0h
    6969
     70FLGH_DPT_SERIAL_FLOPPY                      EQU (1<<4)
     71FLGH_DPT_SERIAL_FLOPPY_TYPE_MASK            EQU 0e0h
     72FLGH_DPT_SERIAL_FLOPPY_TYPE_FIELD_POSITION  EQU 5
     73
    7074; Addressing modes for DPT.wFlags
    7175ADDRESSING_MODE_FIELD_POSITION  EQU     5

  • trunk/XTIDE_Universal_BIOS/Inc/RamVars.inc

    r248 r258  
    1111struc XLATEVARS
    1212    .wFDandHDswap:
    13     .bFDSwap        resb    1   ; Floppy Drive to swap to 00h and vice versa
    14     .bHDSwap        resb    1   ; Hard Drive to swap to 80h and vice versa
    15     .bXlatedDrv     resb    1   ; Drive number after translation
    16                     resb    1   ; alignment
     13    .bFDSwap            resb    1   ; Floppy Drive to swap to 00h and vice versa
     14    .bHDSwap            resb    1   ; Hard Drive to swap to 80h and vice versa
     15    .bXlatedDrv         resb    1   ; Drive number after translation
     16%ifdef MODULE_SERIAL_FLOPPY
     17    .bFlopCreateCnt:
     18    .bFlopCntAndFirst   resb    1   ; Normally, packed starting floppy drive number (high order 7 bits)
     19                                    ; and number of drives (low order bit, max 2 drives supported).
     20                                    ; During initialization, until the end of DetectDrives_FromAllIDEControllers,
     21                                    ; this byte contains the raw number of floppy drives seen (using .bFlopCreateCnt)
     22%else
     23                        resb    1   ; alignment
     24%endif
    1725endstruc
    1826
    … …  
    2735
    2836    .wDrvCntAndFirst:
     37    .bFirstDrv          resb    1   ; Number of first drive for this BIOS
    2938    .bDrvCnt            resb    1   ; Number of drives handled by this BIOS
    30     .bFirstDrv          resb    1   ; Number of first drive for this BIOS
    3139
    3240    ; Variables for drive number translation

  • trunk/XTIDE_Universal_BIOS/Src/Boot/BootMenu.asm

    r248 r258  
    3737;               Clear: There is no selected menu item, DL is not valid
    3838;   Corrupts registers:
    39 ;       CX, DI
     39;       AX, DI
    4040;--------------------------------------------------------------------
    4141ALIGN JUMP_ALIGN
    … …  
    5050
    5151    mov     dl, cl                          ; Copy menuitem index to DX
    52     call    FloppyDrive_GetCountToCX
    53     cmp     dl, cl                          ; Floppy drive?
     52    call    FloppyDrive_GetCountToAX
     53    cmp     dl, al                          ; Floppy drive?
    5454    jb      SHORT .ReturnFloppyDriveInDX    ; Set CF if branch taken
    55     or      cl, 80h                         ; Or 80h into CL before the sub
     55    or      al, 80h                         ; Or 80h into AL before the sub
    5656                                            ; to cause CF to be set after
    5757                                            ; and result has high order bit set
    58     sub     dl, cl                          ; Remove floppy drives from index
     58    sub     dl, al                          ; Remove floppy drives from index
    5959
    6060.ReturnFloppyDriveInDX:
    … …  
    9494ALIGN JUMP_ALIGN
    9595BootMenu_GetMenuitemCountToAX:
    96     call    RamVars_GetHardDiskCountFromBDAtoCX
     96    call    RamVars_GetHardDiskCountFromBDAtoAX
    9797    xchg    ax, cx
    98     call    FloppyDrive_GetCountToCX
     98    call    FloppyDrive_GetCountToAX
    9999    add     ax, cx
    100100    ret
    … …  
    136136BootMenu_GetMenuitemToAXforAsciiHotkeyInAL:
    137137    call    Char_ALtoUpperCaseLetter
    138     call    BootMenu_GetLetterForFirstHardDiskToCL
    139138    xor     ah, ah
    140     cmp     al, cl                      ; Letter is for Hard Disk?
     139    xchg    ax, cx
     140    call    BootMenu_GetLetterForFirstHardDiskToAL
     141    cmp     cl, al                      ; Letter is for Hard Disk?
    141142    jae     SHORT .StartFromHardDiskLetter
     143    xchg    ax, cx
    142144    sub     al, 'A'                     ; Letter to Floppy Drive menuitem
    143145    ret
    144146ALIGN JUMP_ALIGN
    145147.StartFromHardDiskLetter:
    146     sub     al, cl                      ; Hard Disk index
    147     call    FloppyDrive_GetCountToCX
     148    sub     cl, al                      ; Hard Disk index
     149    call    FloppyDrive_GetCountToAX
    148150    add     ax, cx                      ; Menuitem index
     151                                        ; Note: no need to xchg ax, cx as above, since adding with result to ax
    149152    ret
    150153
    … …  
    160163;       CL:     Upper case letter for first hard disk
    161164;   Corrupts registers:
    162 ;       CH
    163 ;--------------------------------------------------------------------
    164 ALIGN JUMP_ALIGN
    165 BootMenu_GetLetterForFirstHardDiskToCL:
    166     call    FloppyDrive_GetCountToCX
    167     add     cl, 'A'
    168     cmp     cl, 'C'
     165;       AX
     166;--------------------------------------------------------------------
     167ALIGN JUMP_ALIGN
     168BootMenu_GetLetterForFirstHardDiskToAL:
     169    call    FloppyDrive_GetCountToAX
     170    add     al, 'A'
     171    cmp     al, 'C'
    169172    ja      .Return
    170     mov     cl, 'C'
     173    mov     al, 'C'
    171174ALIGN JUMP_ALIGN, ret
    172175.Return:
    … …  
    181184;       DX:     Menuitem index (assuming drive is available)
    182185;   Corrupts registers:
    183 ;       Nothing
     186;       AX
    184187;--------------------------------------------------------------------
    185188ALIGN JUMP_ALIGN
    … …  
    188191    test    dl, dl
    189192    jns     SHORT .ReturnItemIndexInDX  ; Return if floppy drive (HD bit not set)
    190     call    FloppyDrive_GetCountToCX
     193    call    FloppyDrive_GetCountToAX
    191194    and     dl, ~80h                    ; Clear HD bit
    192     add     dx, cx
     195    add     dx, ax
    193196.ReturnItemIndexInDX:
    194197    ret
    … …  
    212215    test    dl, dl                              ; Floppy drive?
    213216    jns     SHORT .IsFloppyDriveInSystem
    214     call    RamVars_GetHardDiskCountFromBDAtoCX ; Hard Disk count to CX
    215     or      cl, 80h                             ; Set Hard Disk bit to CX
     217    call    RamVars_GetHardDiskCountFromBDAtoAX ; Hard Disk count to AX
     218    or      al, 80h                             ; Set Hard Disk bit to AX
    216219    jmp     SHORT .CompareDriveNumberToDriveCount
    217220.IsFloppyDriveInSystem:
    218     call    FloppyDrive_GetCountToCX
     221    call    FloppyDrive_GetCountToAX
    219222.CompareDriveNumberToDriveCount:
    220     cmp     dl, cl                              ; Set CF when DL is smaller
    221     ret
     223    cmp     dl, al                              ; Set CF when DL is smaller
     224    ret

  • trunk/XTIDE_Universal_BIOS/Src/Boot/BootMenuEvent.asm

    r248 r258  
    2121%ifdef MENUEVENT_INLINE_OFFSETS
    2222
    23     add     bx, BootMenuEvent_Handler
     23    add     bx, BootMenuEvent_Handler.FirstEvent
    2424    jmp     bx
    2525
    26 MENUEVENT_InitializeMenuinitFromDSSI equ  (BootMenuEvent_Handler.InitializeMenuinitFromDSSI - BootMenuEvent_Handler)
    27 MENUEVENT_ExitMenu equ  (BootMenuEvent_EventCompleted - BootMenuEvent_Handler)
    28 MENUEVENT_ItemHighlightedFromCX equ (BootMenuEvent_Handler.ItemHighlightedFromCX - BootMenuEvent_Handler)
    29 MENUEVENT_ItemSelectedFromCX equ (BootMenuEvent_Handler.ItemSelectedFromCX - BootMenuEvent_Handler)
    30 MENUEVENT_KeyStrokeInAX equ (BootMenuEvent_Handler.KeyStrokeInAX - BootMenuEvent_Handler)
    31 MENUEVENT_RefreshTitle equ (BootMenuPrint_TitleStrings - BootMenuEvent_Handler)
    32 MENUEVENT_RefreshInformation equ (BootMenuPrint_RefreshInformation - BootMenuEvent_Handler)
    33 MENUEVENT_RefreshItemFromCX equ (BootMenuPrint_RefreshItem - BootMenuEvent_Handler)
     26MENUEVENT_InitializeMenuinitFromDSSI equ  (BootMenuEvent_Handler.InitializeMenuinitFromDSSI - BootMenuEvent_Handler.FirstEvent)
     27MENUEVENT_ExitMenu equ  (BootMenuEvent_EventCompleted - BootMenuEvent_Handler.FirstEvent)
     28MENUEVENT_ItemHighlightedFromCX equ (BootMenuEvent_Handler.ItemHighlightedFromCX - BootMenuEvent_Handler.FirstEvent)
     29MENUEVENT_ItemSelectedFromCX equ (BootMenuEvent_Handler.ItemSelectedFromCX - BootMenuEvent_Handler.FirstEvent)
     30MENUEVENT_KeyStrokeInAX equ (BootMenuEvent_Handler.KeyStrokeInAX - BootMenuEvent_Handler.FirstEvent)
     31MENUEVENT_RefreshTitle equ (BootMenuPrint_TitleStrings - BootMenuEvent_Handler.FirstEvent)
     32MENUEVENT_RefreshInformation equ (BootMenuPrint_RefreshInformation - BootMenuEvent_Handler.FirstEvent)
     33MENUEVENT_RefreshItemFromCX equ (BootMenuPrint_RefreshItem - BootMenuEvent_Handler.FirstEvent)
    3434;
    3535; Note that there is no entry for MENUEVENT_IdleProcessing.  If MENUEVENT_IDLEPROCESSING_ENABLE is not %defined,
    … …  
    6767;   DS:SI:      Ptr to initialized MENUINIT struct
    6868ALIGN JUMP_ALIGN
     69.FirstEvent:   
    6970.InitializeMenuinitFromDSSI:
    7071    push    ds

  • trunk/XTIDE_Universal_BIOS/Src/Boot/BootMenuPrint.asm

    r255 r258  
    2424
    2525    call    RamVars_IsDriveHandledByThisBIOS               
    26     jnc     .notOurs
     26    jc      .notOurs
    2727
    2828    call    FindDPT_ForDriveNumber                  ; if it is one of ours, print the string in bootnfo
    … …  
    4747    push    ax                                      ; the hard disks don't ever use it, but it does no harm)
    4848       
    49     jmp     short BootMenuPrint_FormatCSSIfromParamsInSSBP
     49    jmp     short BootMenuPrint_RefreshInformation.FormatRelay
    5050
    5151;--------------------------------------------------------------------
    … …  
    8787    push    bp
    8888    mov     bp,sp
    89     jmp     short BootMenuPrint_FormatCSSIfromParamsInSSBP
     89    jmp     short BootMenuPrint_RefreshInformation.FormatRelay
    9090
    9191       
    … …  
    110110    mov     bp, sp
    111111
     112    mov     si, g_szCapacity                            ; Setup print string now, carries through to print call
     113
     114    xor     di, di
     115    call    RamVars_IsDriveHandledByThisBIOS
     116    jc      SHORT .notours
     117    call    FindDPT_ForDriveNumber                      ; DS:DI to point DPT
     118.notours:       
     119       
    112120    test    dl, dl                                      ; are we a hard disk?
    113121    js      BootMenuPrint_HardDiskRefreshInformation       
    114        
     122
     123    test    di,di
     124    jnz     .ours
    115125    call    FloppyDrive_GetType                         ; Get Floppy Drive type to BX
     126    jmp     .around
     127.ours:
     128    call    AH8h_GetDriveParameters
     129.around:               
    116130
    117131    mov     ax, g_szFddSizeOr                           ; .PrintXTFloppyType
    118     test    bx, bx                                      ; Two possibilities? (FLOPPY_TYPE_525_OR_35_DD)     
     132    test    bl, bl                                      ; Two possibilities? (FLOPPY_TYPE_525_OR_35_DD)     
    119133    jz      SHORT .PushAXAndOutput
    120134
    … …  
    158172
    159173    mov     al,FloppyTypes.rgbCapacityMultiplier
     174    mov     bh, 0
    160175    mul     byte [cs:bx+FloppyTypes.rgbCapacity - 1]    ; -1 since 0 is handled above and not in the table
    161176
    … …  
    163178    push    ax
    164179
    165     jmp     short BootMenuPrint_HardDiskRefreshInformation.output
     180.FormatRelay:
     181    jmp     short BootMenuPrint_FormatCSSIfromParamsInSSBP
    166182
    167183
    … …  
    180196ALIGN JUMP_ALIGN
    181197BootMenuPrint_HardDiskRefreshInformation:       
    182     call    RamVars_IsDriveHandledByThisBIOS
    183     jnc     SHORT .HardDiskMenuitemInfoForForeignDrive
    184     call    FindDPT_ForDriveNumber                      ; DS:DI to point DPT
    185     ; Fall to .HardDiskMenuitemInfoForOurDrive
    186 
    187 ;--------------------------------------------------------------------
    188 ; .HardDiskMenuitemInfoForOurDrive
    189 ;   Parameters:
    190 ;       DL:     Untranslated Hard Disk number
    191 ;       DS:DI:  Ptr to DPT
    192 ;   Returns:
    193 ;       Nothing
    194 ;   Corrupts registers:
    195 ;       AX, BX, CX, DX, SI, DI, ES
    196 ;--------------------------------------------------------------------
     198    test    di,di
     199    jz      .HardDiskMenuitemInfoForForeignDrive       
     200
    197201.HardDiskMenuitemInfoForOurDrive:
    198202    ePUSH_T ax, g_szInformation
    … …  
    200204    ; Get and push total LBA size
    201205    call    BootMenuInfo_GetTotalSectorCount
    202     call    ConvertSectorCountInBXDXAXtoSizeAndPushForFormat       
    203     jmp     BootMenuPrintCfg_ForOurDrive
    204 
    205 ;--------------------------------------------------------------------
    206 ; .HardDiskMenuitemInfoForForeignDrive
    207 ;   Parameters:
    208 ;       DL:     Untranslated Hard Disk number
    209 ;       DS:     RAMVARS segment
    210 ;   Returns:
    211 ;       CF:     Set since menu event was handled successfully
    212 ;   Corrupts registers:
    213 ;       AX, BX, CX, DX, SI, DI
    214 ;--------------------------------------------------------------------
    215 ALIGN JUMP_ALIGN
     206    jmp     .ConvertSectorCountInBXDXAXtoSizeAndPushForFormat
     207       
    216208.HardDiskMenuitemInfoForForeignDrive:
    217209    call    DriveXlate_ToOrBack
    218210    call    AH15h_GetSectorCountFromForeignDriveToDXAX
    219     call    ConvertSectorCountInBXDXAXtoSizeAndPushForFormat
    220 
    221 ALIGN JUMP_ALIGN       
    222 .output:
    223     mov     si, g_szCapacity
    224 ;;; fall-through
     211
     212.ConvertSectorCountInBXDXAXtoSizeAndPushForFormat:
     213    ePUSH_T cx, g_szCapacityNum     ; Push format substring
     214    call    Size_ConvertSectorCountInBXDXAXtoKiB
     215    mov     cx, BYTE_MULTIPLES.kiB
     216    call    Size_GetSizeToAXAndCharToDLfromBXDXAXwithMagnitudeInCX
     217    push    ax                      ; Size in magnitude
     218    push    cx                      ; Tenths
     219    push    dx                      ; Magnitude character       
     220               
     221    test    di,di
     222    jz      short BootMenuPrint_FormatCSSIfromParamsInSSBP
     223
     224%include "BootMenuPrintCfg.asm"         ; inline of code to fill out remainder of information string
     225
     226;;; fall-through to BootMenuPrint_FormatCSSIfromParamsInSSBP
     227
    225228
    226229;--------------------------------------------------------------------
    … …  
    273276ALIGN JUMP_ALIGN
    274277BootMenuPrint_TheBottomOfScreen:
    275     call    FloppyDrive_GetCountToCX
    276     mov     bl, cl                  ; Floppy Drive count to BL
    277     call    RamVars_GetHardDiskCountFromBDAtoCX
    278     mov     bh, cl                  ; Hard Disk count to BH
     278    call    FloppyDrive_GetCountToAX
     279    xchg    bx, ax                  ; Floppy Drive count to BL
     280    call    RamVars_GetHardDiskCountFromBDAtoAX
     281    mov     bh, al                  ; Hard Disk count to BH
    279282    ; Fall to .MoveCursorToHotkeyStrings
    280283
    … …  
    321324    test    bh, bh      ; Any Hard Drives?
    322325    jz      SHORT .SkipHardDriveHotkeys
    323     xchg    ax, cx      ; Store Key Attribute
    324     call    BootMenu_GetLetterForFirstHardDiskToCL
    325     mov     ch, ANGLE_QUOTE_RIGHT
    326     xchg    ax, cx
     326    call    BootMenu_GetLetterForFirstHardDiskToAL
     327    mov     ah, ANGLE_QUOTE_RIGHT
    327328    mov     si, g_szHDD
    328329    call    PushHotkeyParamsAndFormat
    … …  
    390391    CALL_DISPLAY_LIBRARY InitializeDisplayContext
    391392    ret
    392 
    393 
    394 ;--------------------------------------------------------------------
    395 ; ConvertSectorCountInBXDXAXtoSizeAndPushForFormat
    396 ;   Parameters:
    397 ;       BX:DX:AX:   Sector count
    398 ;   Returns:
    399 ;       Size in stack
    400 ;   Corrupts registers:
    401 ;       AX, BX, CX, DX, SI
    402 ;--------------------------------------------------------------------
    403 ALIGN JUMP_ALIGN
    404 ConvertSectorCountInBXDXAXtoSizeAndPushForFormat:
    405     pop     si                      ; Pop return address
    406     ePUSH_T cx, g_szCapacityNum     ; Push format substring
    407     call    Size_ConvertSectorCountInBXDXAXtoKiB
    408     mov     cx, BYTE_MULTIPLES.kiB
    409     call    Size_GetSizeToAXAndCharToDLfromBXDXAXwithMagnitudeInCX
    410     push    ax                      ; Size in magnitude
    411     push    cx                      ; Tenths
    412     push    dx                      ; Magnitude character
    413     jmp     si
    414393
    415394

  • trunk/XTIDE_Universal_BIOS/Src/Boot/BootMenuPrintCfg.asm

    r241 r258  
    22; Description   :   Functions for printing drive configuration
    33;                   information on Boot Menu.
    4 
     4;
     5; Included by BootMenuPrint.asm, this routine is to be inserted into
     6; BootMenuPrint_HardDiskRefreshInformation.
     7;
    58; Section containing code
    69SECTION .text
     10
     11;;; fall-into from BootMenuPrint_HardDiskRefreshInformation.
    712
    813;--------------------------------------------------------------------
    … …  
    1621;       Nothing
    1722;   Corrupts registers:
    18 ;       AX, BX, CX, DX, SI, DI
     23;       AX, BX, CX, DX
    1924;--------------------------------------------------------------------
    20 ALIGN JUMP_ALIGN
    21 BootMenuPrintCfg_ForOurDrive:
     25.BootMenuPrintCfg_ForOurDrive:
    2226    eMOVZX  ax, BYTE [di+DPT.bIdevarsOffset]
    23     xchg    si, ax                      ; CS:SI now points to IDEVARS
     27    xchg    bx, ax                      ; CS:BX now points to IDEVARS
    2428    ; Fall to .PushAndFormatCfgString
    2529
    … …  
    2832;   Parameters:
    2933;       DS:DI:  Ptr to DPT
    30 ;       CS:SI:  Ptr to IDEVARS
     34;       CS:BX:  Ptr to IDEVARS
    3135;   Returns:
    3236;       Nothing (jumps to next push below)
    3337;   Corrupts registers:
    34 ;       AX, BX
     38;       AX, CX
    3539;--------------------------------------------------------------------
    3640.PushAddressingMode:
    … …  
    4145    ;; with AL clear, and so we exchange AL and AH after the multiply for the final result.
    4246    ;;
    43     mov     bl,(1<<(8-ADDRESSING_MODE_FIELD_POSITION)) * g_szAddressingModes_Displacement
    44     mul     bl
     47    mov     cl,(1<<(8-ADDRESSING_MODE_FIELD_POSITION)) * g_szAddressingModes_Displacement
     48    mul     cl
    4549    xchg    al,ah
    4650    add     ax,g_szAddressingModes
    … …  
    5155;   Parameters:
    5256;       DS:DI:  Ptr to DPT
    53 ;       CS:SI:  Ptr to IDEVARS
     57;       CS:BX:  Ptr to IDEVARS
    5458;   Returns:
    5559;       Nothing (falls to next push below)
    … …  
    6973;   Parameters:
    7074;       DS:DI:  Ptr to DPT
    71 ;       CS:SI:  Ptr to IDEVARS
     75;       CS:BX:  Ptr to IDEVARS
    7276;   Returns:
    7377;       Nothing (jumps to next push below)
    … …  
    7781.PushBusType:
    7882    mov     al,g_szBusTypeValues_Displacement
    79     mul     BYTE [cs:si+IDEVARS.bDevice]
     83    mul     BYTE [cs:bx+IDEVARS.bDevice]
    8084       
    8185    shr     ax,1            ; divide by 2 since IDEVARS.bDevice is multiplied by 2
    … …  
    8892;   Parameters:
    8993;       DS:DI:  Ptr to DPT
    90 ;       CS:SI:  Ptr to IDEVARS
     94;       CS:BX:  Ptr to IDEVARS
    9195;   Returns:
    9296;       Nothing (falls to next push below)
    … …  
    9599;--------------------------------------------------------------------
    96100.PushIRQ:
    97     mov     al, BYTE [cs:si+IDEVARS.bIRQ]
     101    mov     al, BYTE [cs:bx+IDEVARS.bIRQ]
    98102    cbw
    99103    push    ax
    … …  
    103107;   Parameters:
    104108;       DS:DI:  Ptr to DPT
    105 ;       CS:SI:  Ptr to IDEVARS
     109;       CS:BX:  Ptr to IDEVARS
    106110;   Returns:
    107111;       Nothing (falls to next push below)
    … …  
    114118    push    ax
    115119
    116 ;--------------------------------------------------------------------
    117 ; PrintValuesFromStack
    118 ;   Parameters:
    119 ;       Stack:  All formatting parameters
    120 ;   Returns:
    121 ;       Nothing
    122 ;   Corrupts registers:
    123 ;       AX, SI, DI
    124 ;--------------------------------------------------------------------
    125 .PrintValuesFromStack:
    126     jmp     BootMenuPrint_HardDiskRefreshInformation.output
    127 
     120;;; fall-out to BootMenuPrint_HardDiskRefreshInformation.

  • trunk/XTIDE_Universal_BIOS/Src/Device/Device.asm

    r249 r258  
    3737%ifdef MODULE_SERIAL
    3838Device_FinalizeDPT:
    39     TEST_USIGN_DPT_AND_JUMP_IF_SERIAL_DEVICE .FinalizeDptForSerialPortDevice
     39    ; needs to check IDEVARS vs. checking the DPT as the serial bit in the DPT is set in the Finalize routine
     40    CMP_USING_IDEVARS_IN_CSBP_AND_JUMP_IF DEVICE_SERIAL_PORT, .FinalizeDptForSerialPortDevice
    4041    jmp     IdeDPT_Finalize
    41 .FinalizeDptForSerialPortDevice:
     42.FinalizeDptForSerialPortDevice: 
    4243    jmp     SerialDPT_Finalize
    4344

  • trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeDPT.asm

    r242 r258  
    1212;       CS:BP:  Ptr to IDEVARS for the controller
    1313;   Returns:
    14 ;       Nothing
     14;       CF:     Clear, IDE interface only supports hard disks
    1515;   Corrupts registers:
    1616;       AX
    … …  
    4242;       CS:BP:  Ptr to IDEVARS for the controller
    4343;   Returns:
    44 ;       Nothing
     44;       CF:     Always clear, we don't support floppies on the IDE inteface
    4545;   Corrupts registers:
    4646;       Nothing
    … …  
    5252
    5353.EndDPT:
     54    clc
    5455    ret

  • trunk/XTIDE_Universal_BIOS/Src/Device/Serial/SerialCommand.asm

    r242 r258  
    5656;   Returns:
    5757;       AH:     INT 13h Error Code
     58;       CX:     Number of successfully transferred sectors (for transfer commands)
    5859;       CF:     Cleared if success, Set if error
    5960;   Corrupts registers:
    … …  
    309310        dec     al              ; decrement sector count
    310311        push    ax              ; save
    311         jz      SerialCommand_OutputWithParameters_ReturnCodeInALCF    ; CF=0 from "cmp ax,bp" returning Zero above
     312        jz      SerialCommand_OutputWithParameters_ReturnCodeInAL
    312313
    313314        cli                     ; interrupts back off for ACK byte to host
    … …  
    409410
    410411.clearBufferComplete:
    411         stc
    412         mov     al,1
    413 
    414 ALIGN JUMP_ALIGN
    415 SerialCommand_OutputWithParameters_ReturnCodeInALCF:
     412        mov     al, 3           ;  error return code and CF (low order bit)
     413
     414ALIGN JUMP_ALIGN
     415SerialCommand_OutputWithParameters_ReturnCodeInAL:
    416416%if 0
    417417        sti                     ;  all paths here will already have interrupts turned back on
    418418%endif
    419         mov     ah,al
    420 
    421         pop     bp              ;  recover ax (command and count) from stack, throw away
     419        mov     ah, al          ;  for success, AL will already be zero
     420
     421        pop     bx              ;  recover "ax" (command and count) from stack
    422422
    423423        pop     bp
    424424        pop     di
    425425        pop     si
     426
     427        mov     ch, 0
     428        mov     cl,[bp+IDEPACK.bSectorCount]
     429        sub     cl, bl          ; subtract off the number of sectors that remained
     430       
     431        shr     ah, 1           ; shift down return code and CF
    426432
    427433        ret
    … …  
    632638        call    FindDPT_ToDSDIforSerialDevice
    633639        pop     si
     640%ifdef MODULE_SERIAL_FLOPPY
     641        jc      .founddpt
     642;
     643; If not found above with FindDPT_ToDSDIforSerialDevice, DI will point to the DPT after the last hard disk DPT
     644;
     645        cmp     byte [RAMVARS.xlateVars+XLATEVARS.bFlopCntAndFirst], 0
     646        jz      .notfounddpt
     647.founddpt:
     648%else
    634649        jnc     .notfounddpt
     650%endif
    635651        mov     ax, [di+DPT_SERIAL.wSerialPortAndBaud]
    636652.notfounddpt:
    … …  
    678694; which is read by FinalizeDPT and DetectDrives
    679695;
    680         mov     [es:si+ATA6.wVendor],dx
     696        mov     [es:si+ATA6.wSerialPortAndBaud],dx
    681697
    682698.notFound:

  • trunk/XTIDE_Universal_BIOS/Src/Device/Serial/SerialDPT.asm

    r242 r258  
    1111;       ES:SI:  Ptr to 512-byte ATA information read from the drive
    1212;   Returns:
    13 ;       Nothing
     13;       CF:     Set, indicates that this is a floppy disk
     14;               Clear, indicates that this is a hard disk
    1415;   Corrupts registers:
    1516;       AX
    1617;--------------------------------------------------------------------
    1718SerialDPT_Finalize:
    18         or      byte [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
    19         mov     ax, [es:si+ATA6.wVendor]
     19        mov     ax, [es:si+ATA6.wSerialPortAndBaud]
    2020        mov     [di+DPT_SERIAL.wSerialPortAndBaud], ax
     21
     22;
     23; Note that this section is not under %ifdef MODULE_SERIAL_FLOPPY.  It is important to
     24; detect floppy disks presented by the server and not treat them like hard disks, even
     25; if the floppy support is disabled.
     26;
     27        mov     al, [es:si+ATA6.wSerialFloppyFlagAndType]
     28        or      al, FLGH_DPT_SERIAL_DEVICE
     29        or      byte [di+DPT.bFlagsHigh], al
     30
     31        test    al, FLGH_DPT_SERIAL_FLOPPY           ; clears CF
     32        jz      .notfloppy
     33        stc     
     34.notfloppy:     
     35       
    2136        ret
    2237

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h.asm

    r249 r258  
    2929    mov     [RAMVARS.xlateVars+XLATEVARS.bXlatedDrv], dl
    3030    call    RamVars_IsFunctionHandledByThisBIOS
    31     jnc     SHORT Int13h_DirectCallToAnotherBios
     31    jc      SHORT Int13h_DirectCallToAnotherBios
     32
    3233    call    FindDPT_ForDriveNumber      ; DS:DI now points to DPT
    3334
    … …  
    139140ALIGN JUMP_ALIGN
    140141Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH:
     142%ifdef MODULE_SERIAL_FLOPPY
     143    mov     al, [bp+IDEPACK.intpack+INTPACK.dl]
     144Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH_ALHasDriveNumber:   
     145    call    Int13h_SetErrorCodeToBdaAndToIntpackInSSBPfromAH_ALHasDriveNumber
     146%else
    141147    call    Int13h_SetErrorCodeToBdaAndToIntpackInSSBPfromAH
     148%endif
    142149Int13h_ReturnFromHandlerWithoutStoringErrorCode:
    143150    or      WORD [bp+IDEPACK.intpack+INTPACK.flags], FLG_FLAGS_IF   ; Return with interrupts enabled
    … …  
    154161;   Returns:
    155162;       Depends on function
     163;       NOTE: ES:DI needs to be returned from the previous interrupt
     164;             handler, for floppy DPT in function 08h
    156165;   Corrupts registers:
    157 ;       BX, DI, ES
     166;       None
    158167;--------------------------------------------------------------------
    159168ALIGN JUMP_ALIGN
    160169Int13h_CallPreviousInt13hHandler:
    161     push    di
    162170    call    ExchangeCurrentInt13hHandlerWithOldInt13hHandler
    163171    int     BIOS_DISK_INTERRUPT_13h
    164     call    ExchangeCurrentInt13hHandlerWithOldInt13hHandler
    165     pop     di
    166     ret
    167 
     172;;;  fall-through to ExchangeCurrentInt13hHandlerWithOldInt13hHandler
    168173
    169174;--------------------------------------------------------------------
    … …  
    174179;       Nothing
    175180;   Corrupts registers:
    176 ;       DI
     181;       Nothing
     182;       Note: Flags are preserved
    177183;--------------------------------------------------------------------
    178184ALIGN JUMP_ALIGN
    179185ExchangeCurrentInt13hHandlerWithOldInt13hHandler:
    180186    push    es
    181     LOAD_BDA_SEGMENT_TO es, di
    182     mov     di, [RAMVARS.fpOldI13h]
     187    push    si
     188    LOAD_BDA_SEGMENT_PRESERVE_FLAGS_TO  es, si
     189    mov     si, [RAMVARS.fpOldI13h]
    183190    cli
    184     xchg    di, [es:BIOS_DISK_INTERRUPT_13h*4]
    185     mov     [RAMVARS.fpOldI13h], di
    186     mov     di, [RAMVARS.fpOldI13h+2]
    187     xchg    di, [es:BIOS_DISK_INTERRUPT_13h*4+2]
     191    xchg    si, [es:BIOS_DISK_INTERRUPT_13h*4]
     192    mov     [RAMVARS.fpOldI13h], si
     193    mov     si, [RAMVARS.fpOldI13h+2]
     194    xchg    si, [es:BIOS_DISK_INTERRUPT_13h*4+2]
    188195    sti
    189     mov     [RAMVARS.fpOldI13h+2], di
     196    mov     [RAMVARS.fpOldI13h+2], si
     197    pop     si
    190198    pop     es
    191199    ret
    … …  
    204212;--------------------------------------------------------------------
    205213ALIGN JUMP_ALIGN
     214%ifdef MODULE_SERIAL_FLOPPY
     215Int13h_SetErrorCodeToBdaAndToIntpackInSSBPfromAH_ALHasDriveNumber:
     216    ; Store error code to BDA
     217    mov     bx, BDA.bHDLastSt
     218    test    al, al
     219    js      .HardDisk
     220    mov     bl, BDA.bFDRetST & 0xff
     221.HardDisk:
     222    LOAD_BDA_SEGMENT_TO ds, di
     223    mov     [bx], ah       
     224%else
    206225Int13h_SetErrorCodeToBdaAndToIntpackInSSBPfromAH:
    207226    ; Store error code to BDA
    208     LOAD_BDA_SEGMENT_TO ds, di
     227    LOAD_BDA_SEGMENT_TO ds, di     
    209228    mov     [BDA.bHDLastSt], ah
     229%endif
    210230
    211231    ; Store error code to INTPACK

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH0h_HReset.asm

    r152 r258  
    2222    eMOVZX  bx, dl                      ; Copy requested drive to BL, zero BH to assume no errors
    2323    call    ResetFloppyDrivesWithInt40h
    24     test    bl, bl
    25     jns     SHORT .SkipHardDiskReset
    2624    call    ResetForeignHardDisks
    2725    call    AH0h_ResetHardDisksHandledByOurBIOS
    … …  
    6462    xor     ah, ah                      ; Disk Controller Reset
    6563    call    Int13h_CallPreviousInt13hHandler
    66     jmp     SHORT BackupErrorCodeFromTheRequestedDriveToBH
    67 
     64;;; fall-through to BackupErrorCodeFromTheRequestedDriveToBH
     65
     66
     67;--------------------------------------------------------------------
     68; BackupErrorCodeFromTheRequestedDriveToBH
     69;   Parameters:
     70;       AH:     Error code from the last resetted drive
     71;       DL:     Drive last resetted
     72;       BL:     Requested drive (DL when entering AH=00h)
     73;   Returns:
     74;       BH:     Backuped error code
     75;   Corrupts registers:
     76;       Nothing
     77;--------------------------------------------------------------------
     78ALIGN JUMP_ALIGN
     79BackupErrorCodeFromTheRequestedDriveToBH:
     80    cmp     dl, bl              ; Requested drive?
     81    eCMOVE  bh, ah
     82    ret
     83       
    6884
    6985;--------------------------------------------------------------------
    … …  
    8298    mov     dl, bl
    8399    call    RamVars_IsDriveHandledByThisBIOS
    84     jnc     SHORT .Return               ; Return what was in BL unmodified
     100    jc      SHORT .Return               ; Return what was in BL unmodified
    85101    mov     dl, 80h
    86102.Return:
    … …  
    101117ALIGN JUMP_ALIGN
    102118AH0h_ResetHardDisksHandledByOurBIOS:
    103     mov     dh, [RAMVARS.bDrvCnt]       ; Load drive count to DH
     119    mov     dx, [RAMVARS.wDrvCntAndFirst]   ; DL = drive number, DH = drive count
    104120    test    dh, dh
    105121    jz      SHORT .AllDrivesReset       ; Return if no drives
    106     mov     dl, [RAMVARS.bFirstDrv]     ; Load number of our first drive
    107122    add     dh, dl                      ; DH = one past last drive to reset
    108123ALIGN JUMP_ALIGN
    … …  
    114129    jb      SHORT .DriveResetLoop       ;  If not, reset next drive
    115130.AllDrivesReset:
    116     ret
    117 
     131%ifdef MODULE_SERIAL_FLOPPY
     132;
     133; "Reset" emulatd serial floppy drives, if any.  There is nothing to actually do for this reset,
     134; but record the proper error return code if one of these floppy drives is the drive requested.
     135;
     136    call    RamVars_UnpackFlopCntAndFirstToAL
     137
     138    cbw                                                 ; Clears AH (there are flop drives) or ffh (there are not)
     139                                                        ; Either AH has success code (flop drives are present)
     140                                                        ; or it doesn't matter because we won't match drive ffh
     141
     142    cwd                                                 ; clears DX (there are flop drives) or ffffh (there are not)
     143
     144    adc     dl, al                                      ; second drive (CF set) if present
     145                                                        ; If no drive is present, this will result in ffh which
     146                                                        ; won't match a drive
     147    call    BackupErrorCodeFromTheRequestedDriveToBH
     148    mov     dl, al                                      ; We may end up doing the first drive twice (if there is
     149    jmp     BackupErrorCodeFromTheRequestedDriveToBH    ; only one drive), but doing it again is not harmful.
     150%else
     151    ret
     152%endif
     153       
    118154;--------------------------------------------------------------------
    119155; .BackupErrorCodeFromMasterOrSlaveToBH
    … …  
    144180    ret
    145181
     182       
    146183;--------------------------------------------------------------------
    147184; GetBasePortToCX
    … …  
    167204
    168205
    169 ;--------------------------------------------------------------------
    170 ; BackupErrorCodeFromTheRequestedDriveToBH
    171 ;   Parameters:
    172 ;       AH:     Error code from the last resetted drive
    173 ;       DL:     Drive last resetted
    174 ;       BL:     Requested drive (DL when entering AH=00h)
    175 ;   Returns:
    176 ;       BH:     Backuped error code
    177 ;   Corrupts registers:
    178 ;       Nothing
    179 ;--------------------------------------------------------------------
    180 ALIGN JUMP_ALIGN
    181 BackupErrorCodeFromTheRequestedDriveToBH:
    182     cmp     dl, bl              ; Requested drive?
    183     eCMOVE  bh, ah
    184     ret

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH15h_HSize.asm

    r257 r258  
    1515;   Returns with INTPACK:
    1616;       If succesfull:
    17 ;           AH:     3 (Hard disk accessible)
     17;           AH:     Hard Disk: 3 (Hard disk accessible)
     18;                   Floppy:    1 (Floppy disk, without change detection)
    1819;           CX:DX:  Total number of sectors
    1920;           CF:     0
    … …  
    2526ALIGN JUMP_ALIGN
    2627AH15h_HandlerForReadDiskDriveSize:
     28%ifdef MODULE_SERIAL_FLOPPY
     29    mov     cl, 1                                       ; 1 = floppy disk, no change detection
     30               
     31    test    dl,dl                                       ; DO NOT store the sector count if this is a
     32    jns     .FloppyDrive                                ; floppy disk, some OS's depend on this not
     33                                                        ; happening for floppies in order to boot.
     34%endif
     35       
    2736    call    AH15h_GetSectorCountToBXDXAX
    28     mov     [bp+IDEPACK.intpack+INTPACK.cx], dx ; HIWORD to CX
    29     mov     [bp+IDEPACK.intpack+INTPACK.dx], ax ; LOWORD to DX
     37    mov     [bp+IDEPACK.intpack+INTPACK.cx], dx         ; HIWORD to CX
     38    xchg    [bp+IDEPACK.intpack+INTPACK.dx], ax         ; LOWORD to DX, AL gets drive number
    3039
    31     xor     ah, ah
    32     call    Int13h_SetErrorCodeToBdaAndToIntpackInSSBPfromAH    ; Store success to BDA and CF
    33     mov     BYTE [bp+IDEPACK.intpack+INTPACK.ah], 3             ; Type code = Hard disk
     40    xor     ah, ah     
     41%ifdef MODULE_SERIAL_FLOPPY             
     42    mov     cl, 3                                       ; 3 = Hard Disk Accessible
     43.FloppyDrive:
     44       
     45    call    Int13h_SetErrorCodeToBdaAndToIntpackInSSBPfromAH_ALHasDriveNumber   ; Store success to BDA and CF       
     46    mov     BYTE [bp+IDEPACK.intpack+INTPACK.ah], cl
     47%else
     48    call    Int13h_SetErrorCodeToBdaAndToIntpackInSSBPfromAH    ; Store success to BDA and CF       
     49    mov     BYTE [bp+IDEPACK.intpack+INTPACK.ah], 3
     50%endif     
     51       
    3452    jmp     Int13h_ReturnFromHandlerWithoutStoringErrorCode
    3553

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH1h_HStatus.asm

    r150 r258  
    2020AH1h_HandlerForReadDiskStatus:
    2121    LOAD_BDA_SEGMENT_TO ds, ax, !
     22
     23%ifdef MODULE_SERIAL_FLOPPY
     24    test    dl, dl
     25    jns     .HardDisk
     26    mov     ah, [BDA.bFDRetST]      ; Unlike for hard disks below, floppy version does not clear the status
     27    jmp     .done
     28.HardDisk: 
     29%endif
     30       
    2231    xchg    ah, [BDA.bHDLastSt]     ; Load and clear last error
     32                                    ; Note that AH is cleared with the LOAD_BDA_SEGMENT above
     33               
     34.done:
    2335    call    Int13h_SetErrorCodeToIntpackInSSBPfromAH
    2436    jmp     Int13h_ReturnFromHandlerWithoutStoringErrorCode

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH2h_HRead.asm

    r249 r258  
    4040    jmp     Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAHandTransferredSectorsFromCL
    4141%endif
     42

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH8h_HParams.asm

    r227 r258  
    1414;       SS:BP:  Ptr to IDEPACK
    1515;   Returns with INTPACK:
     16;       BL:     Drive Type (for floppies only)
    1617;       CH:     Maximum cylinder number, bits 7...0
    1718;       CL:     Bits 7...6: Cylinder number bits 9...8
    … …  
    1920;       DH:     Maximum head number (0...255)
    2021;       DL:     Number of drives
     22;       ES:DI:  Floppy DPT (for floppies only)
    2123;       AH:     Int 13h/40h floppy return status
    2224;       CF:     0 if successfull, 1 if error
    2325;--------------------------------------------------------------------
    2426AH8h_HandlerForReadDiskDriveParameters:
     27
    2528    call    RamVars_IsDriveHandledByThisBIOS
    26     jnc     SHORT .GetDriveParametersForForeignHardDiskInDL
     29    jnc     SHORT .OurDrive
     30
     31    call    Int13h_CallPreviousInt13hHandler
     32    jnc     SHORT .MidGame
     33    jmp     Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
     34       
     35.OurDrive:     
    2736    call    AH8h_GetDriveParameters
    28     jmp     SHORT .ReturnAfterStoringValuesToIntpack
    2937
    30 .GetDriveParametersForForeignHardDiskInDL:
    31     call    Int13h_CallPreviousInt13hHandler
    32     jc      SHORT .ReturnErrorFromPreviousInt13hHandler
    33     call    RamVars_GetCountOfKnownDrivesToDL
    34 .ReturnAfterStoringValuesToIntpack:
     38%ifdef MODULE_SERIAL_FLOPPY
     39    push    cs                          ; setup registers if we are a floppy drive, in all cases
     40    pop     es                          ; if it is not a floppy drive, these values will not be put in INTPACK
     41    mov     di, AH8h_FloppyDPT
     42%endif
     43    ;; fall-through
     44       
     45.MidGame:       
     46    call    RamVars_GetCountOfKnownDrivesToAX       ; assume hard disk for now, will discard if for floppies
     47
     48    test    byte [bp+IDEPACK.intpack+INTPACK.dl], 080h
     49    jnz     .Done
     50       
     51    mov     [bp+IDEPACK.intpack+INTPACK.bl], bl
     52
     53    mov     [bp+IDEPACK.intpack+INTPACK.es], es
     54    mov     [bp+IDEPACK.intpack+INTPACK.di], di     
     55
     56    call    FloppyDrive_GetCountToAX
     57
     58.Done: 
     59    mov     ah, dh
     60       
    3561    mov     [bp+IDEPACK.intpack+INTPACK.cx], cx
    36     mov     [bp+IDEPACK.intpack+INTPACK.dx], dx
     62    xchg    [bp+IDEPACK.intpack+INTPACK.dx], ax     ; recover DL for BDA last status byte determination
     63
    3764    xor     ah, ah
    38 .ReturnErrorFromPreviousInt13hHandler:
     65%ifdef MODULE_SERIAL_FLOPPY
     66    jmp     Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH_ALHasDriveNumber           
     67%else
    3968    jmp     Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
     69%endif
    4070
    4171
    … …  
    5181;               Bits 5...0: Maximum sector number (1...63)
    5282;       DH:     Maximum head number (0...255)
    53 ;       DL:     Number of drives
    5483;   Corrupts registers:
    5584;       AX, BX
    … …  
    73102;               Bits 5...0: Maximum sector number (1...63)
    74103;       DH:     Maximum head number (0...255)
    75 ;       DL:     Number of drives
    76104;   Corrupts registers:
    77105;       AX, BX
    … …  
    85113    or      cl, bh                  ; CL bits 0...5 = Sectors per track
    86114    mov     dh, bl                  ; DH = Maximum head number
    87     jmp     RamVars_GetCountOfKnownDrivesToDL
     115       
     116%ifdef MODULE_SERIAL_FLOPPY
     117    mov     bl,[di+DPT.bFlagsHigh]
     118    eSHR_IM bl,FLGH_DPT_SERIAL_FLOPPY_TYPE_FIELD_POSITION
     119%endif     
     120    ret
     121
     122%ifdef MODULE_SERIAL_FLOPPY
     123;
     124; Floppy Disk Parameter Table.  There is no way to specify more than one of these
     125; for any given system, so no way to make this drive or media specific.
     126; So we return fixed values out of the ROM for callers might be expecting this information.
     127;
     128; On AT systems, we return the information for a 1.44 MB disk,
     129; and on XT systems, we return the information for a 360 KB disk.
     130;
     131AH8h_FloppyDPT:
     132%ifdef USE_AT
     133    db      0ah << 4 | 0fh          ; Offset 0: Drive timings, 1.44MB values
     134%else
     135    db      0dh << 4 | 0fh          ; Offset 0: Drive timings, 360KB values
     136%endif
     137
     138    db      1h << 1 | 0             ; Offset 1: Typical values of 1 for head load time
     139                                    ;           DMA used (although it actually is not, but is more restrctive)
     140    db      25h                     ; Offset 2: Inactiviy motor turn-off delay,
     141                                    ;           Typical value of 25h for 2 second delay
     142    db      02h                     ; Offset 3: Sector size, always 512
     143
     144%ifdef USE_AT
     145    db      12h                     ; Offset 4: Sectors per track, 1.44MB value
     146    db      1bh                     ; Offset 5: Sector gap, 1.44MB value
     147%else
     148    db      09h                     ; Offset 4: Sectors per track, 360KB value
     149    db      2ah                     ; Offset 5: Sector gap, 360KB value
     150%endif
     151
     152    db      0ffh                    ; Offset 6: Data length
     153
     154%ifdef USE_AT
     155    db      6ch                     ; Offset 7: Format gap length, 1.44MB value
     156%else
     157    db      50h                     ; Offset 7: Format gap length, 360KB value
     158%endif
     159
     160    db      0f6h                    ; Offset 8: Fill byte for format
     161    db      0fh                     ; Offset 9: Head setting time
     162    db      08h                     ; Offset A: Wait for motor startpu time
     163
     164%ifdef USE_AT
     165    db      79                      ; Offset B: Maximum track number, 1.44MB value
     166    db      0                       ; Offset C: Data transfer rate, 1.44MB value
     167    db      4                       ; Offset D: Diskette CMOS drive type, 1.44MB value
     168%else
     169    db      39                      ; Offset B: Maximum track number, 360KB value
     170    db      80h                     ; Offset C: Data transfer rate, 360KB value
     171    db      1                       ; Offset D: Diskette CMOS drive type, 360KB value
     172%endif
     173%endif

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH9h_HInit.asm

    r227 r258  
    4343    push    cx
    4444
     45%ifdef MODULE_SERIAL
     46    ;
     47    ; no need to do this for serial deveices, and we use the DPT_RESET flag bits
     48    ; to store the drive type for serial floppy drives (MODULE_SERIAL_FLOPPY)
     49    ;
     50    xor     ah, ah
     51    test    byte [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE    ; Clears CF
     52    jnz     .ReturnNotSuccessfull
     53%endif
     54       
    4555    ; Try to select drive and wait until ready
    4656    or      BYTE [di+DPT.bFlagsHigh], MASKH_DPT_RESET       ; Everything uninitialized

  • trunk/XTIDE_Universal_BIOS/Src/Handlers/Int19h.asm

    r250 r258  
    3131    ; Install INT 19h handler for proper reboot
    3232    LOAD_BDA_SEGMENT_TO es, ax
    33     mov     bx, BIOS_BOOT_LOADER_INTERRUPT_19h  ; INT 19h interrupt vector offset
     33    mov     al, BIOS_BOOT_LOADER_INTERRUPT_19h  ; INT 19h interrupt vector offset
    3434    mov     si, Int19h_ResetHandler             ; INT 19h handler to reboot the system
    35     call    Interrupts_InstallHandlerToVectorInBXFromCSSI
     35    call    Interrupts_InstallHandlerToVectorInALFromCSSI
    3636    call    Initialize_AndDetectDrives          ; Installs new boot menu loader
    3737    ; Fall to .PrepareStackAndSelectDriveFromBootMenu

  • trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectDrives.asm

    r254 r258  
    4343
    4444%ifdef MODULE_SERIAL
     45;----------------------------------------------------------------------
    4546;
    4647; if serial drive detected, do not scan (avoids duplicate drives and isn't needed - we already have a connection)
    … …  
    5758%endif
    5859
    59 .done:
     60.done: 
     61%ifdef MODULE_SERIAL_FLOPPY
     62;----------------------------------------------------------------------
     63;
     64; Add in any emulated serial floppy drives.
     65;
     66    mov     al, [RAMVARS.xlateVars+XLATEVARS.bFlopCreateCnt]
     67    dec     al
     68    mov     cl, al
     69    js      .NoFloppies                     ; if no drives are present, we store 0ffh
     70
     71    call    FloppyDrive_GetCountFromBIOS_or_BDA
     72
     73    push    ax
     74
     75    add     al, cl                          ; Add our drives to existing drive count
     76    cmp     al, 3                           ; For BDA, max out at 4 drives (ours is zero based)
     77    jl      .MaxBDAFloppiesExceeded
     78    mov     al, 3                           
     79.MaxBDAFloppiesExceeded:
     80    eROR_IM al, 2                           ; move to bits 6-7
     81    inc     ax                              ; low order bit, indicating floppy drive exists
     82
     83    mov     ah, [es:BDA.wEquipment]         ; Load Equipment WORD low byte 
     84    and     ah, 03eh                        ; Mask off drive number and drives present bit
     85    or      al, ah                          ; Or in new values
     86    mov     [es:BDA.wEquipment], al         ; and store
     87
     88    mov     al, 1eh                         ; BDA pointer to Floppy DPT
     89    mov     si, AH8h_FloppyDPT
     90    call    Interrupts_InstallHandlerToVectorInALFromCSSI
     91
     92    pop     ax
     93
     94    shr     cl, 1                           ; number of drives, 1 or 2 only, to CF flag (clear=1, set=2)
     95    rcl     al, 1                           ; starting drive number in upper 7 bits, number of drives in low bit
     96.NoFloppies:   
     97    mov     [RAMVARS.xlateVars+XLATEVARS.bFlopCntAndFirst], al
     98%endif
     99       
    60100    ret
    61101

  • trunk/XTIDE_Universal_BIOS/Src/Initialization/FloppyDrive.asm

    r181 r258  
    120120; Returns number of Floppy Drives in system.
    121121;
    122 ; FloppyDrive_GetCountToCX
    123 ;   Parameters:
    124 ;       Nothing
    125 ;   Returns:
    126 ;       CX:     Number of Floppy Drives
    127 ;   Corrupts registers:
    128 ;       Nothing
    129 ;--------------------------------------------------------------------
    130 ALIGN JUMP_ALIGN
    131 FloppyDrive_GetCountToCX:
     122; FloppyDrive_GetCountToAX
     123;   Parameters:
     124;       DS:     RAMVARS Segment
     125;   Returns:
     126;       AX:     Number of Floppy Drives
     127;--------------------------------------------------------------------
     128ALIGN JUMP_ALIGN
     129FloppyDrive_GetCountToAX:       
     130%ifdef MODULE_SERIAL_FLOPPY
     131    call    RamVars_UnpackFlopCntAndFirstToAL
     132    adc     al,1                        ; adds in the drive count bit, and adds 1 for count vs. 0-index,
     133                                        ; but still won't impact SF
     134    jns     .UseInternalNumber          ; need to clear CH on the way out, and add in additional drive numbers
     135
     136%endif
     137    call    FloppyDrive_GetCountFromBIOS_or_BDA
     138       
     139.UseInternalNumber:
     140    mov     ah, [cs:ROMVARS.bMinFddCnt]
     141    MAX_U   al, ah
     142    cbw
     143       
     144    ret
     145
     146ALIGN JUMP_ALIGN       
     147FloppyDrive_GetCountFromBIOS_or_BDA:
    132148    push    es
    133 %ifdef USE_AT
    134     call    GetCountFromBIOS
    135 %else
    136     call    GetCountFromBDA
    137 %endif
    138     mov     ch, [cs:ROMVARS.bMinFddCnt]
    139     MAX_U   cl, ch
    140     pop     es
    141     xor     ch, ch
    142     ret
    143 
    144149
    145150;--------------------------------------------------------------------
    … …  
    160165%ifdef USE_AT
    161166ALIGN JUMP_ALIGN
    162 GetCountFromBIOS:
     167.GetCountFromBIOS:
    163168    push    di
    164169    push    dx
    165170    push    bx
    166     push    ax
    167171
    168172    mov     ah, 08h                 ; Get Drive Parameters
    169173    cwd                             ; Floppy Drive 00h
    170174    int     BIOS_DISKETTE_INTERRUPT_40h
    171     mov     cl, dl                  ; Number of Floppy Drives to CL
    172 
    173     pop     ax
     175    mov     al, dl                  ; Number of Floppy Drives to AL
     176
    174177    pop     bx
    175178    pop     dx
    176179    pop     di
    177     ret
    178 %endif
    179 
     180%endif
    180181
    181182;--------------------------------------------------------------------
    … …  
    193194%ifndef USE_AT
    194195ALIGN JUMP_ALIGN
    195 GetCountFromBDA:
    196     LOAD_BDA_SEGMENT_TO es, cx
    197     mov     cl, [es:BDA.wEquipment]         ; Load Equipment WORD low byte
    198     mov     ch, cl                          ; Copy it to CH
    199     and     cx, 0C001h                      ; Leave bits 15..14 and 0
    200     eROL_IM ch, 2                           ; EW low byte bits 7..6 to 1..0
    201     add     cl, ch                          ; CL = Floppy Drive count
    202     ret
    203 %endif
     196.GetCountFromBDA:
     197    LOAD_BDA_SEGMENT_TO es, ax
     198    mov     al, [es:BDA.wEquipment]         ; Load Equipment WORD low byte
     199    mov     ah, al                          ; Copy it to CH
     200    and     ax, 0C001h                      ; Leave bits 15..14 and 0
     201    eROL_IM ah, 2                           ; EW low byte bits 7..6 to 1..0
     202    add     al, ah                          ; CL = Floppy Drive count
     203%endif
     204
     205    pop     es
     206    ret
     207       

  • trunk/XTIDE_Universal_BIOS/Src/Initialization/Initialize.asm

    r243 r258  
    2929
    3030    ; Install INT 19h handler (boot loader) where drives are detected
    31     mov     bx, BIOS_BOOT_LOADER_INTERRUPT_19h
     31    mov     al, BIOS_BOOT_LOADER_INTERRUPT_19h
    3232    mov     si, Int19h_BootLoaderHandler
    33     call    Interrupts_InstallHandlerToVectorInBXFromCSSI
     33    call    Interrupts_InstallHandlerToVectorInALFromCSSI
    3434
    3535.SkipRomInitialization:
    … …  
    7373    mov     dl, 80h
    7474    call    RamVars_IsDriveHandledByThisBIOS
    75     jnc     SHORT .FindForDrive81h  ; Store nothing if not our drive
     75    jc      SHORT .FindForDrive81h  ; Store nothing if not our drive
    7676    call    FindDPT_ForDriveNumber  ; DPT to DS:DI
    7777    mov     [es:HD0_DPT_POINTER_41h*4], di
    … …  
    8080    inc     dx
    8181    call    RamVars_IsDriveHandledByThisBIOS
    82     jnc     SHORT .ResetDetectedDrives
     82    jc      SHORT .ResetDetectedDrives
    8383    call    FindDPT_ForDriveNumber
    8484    mov     [es:HD1_DPT_POINTER_46h*4], di

  • trunk/XTIDE_Universal_BIOS/Src/Initialization/Interrupts.asm

    r243 r258  
    3434    mov     ax, [es:BIOS_DISK_INTERRUPT_13h*4]  ; Load old INT 13h offset
    3535    mov     [RAMVARS.fpOldI13h], ax             ; Store old INT 13h offset
    36 
    37     mov     bx, BIOS_DISK_INTERRUPT_13h         ; INT 13h interrupt vector offset
    38     mov     si, Int13h_DiskFunctionsHandler     ; Interrupt handler offset
    39     call    Interrupts_InstallHandlerToVectorInBXFromCSSI
    4036
    4137    ; Only store INT 13h handler to 40h if 40h is not already installed.
    … …  
    4743    mov     [es:BIOS_DISKETTE_INTERRUPT_40h*4+2], dx    ; Store old INT 13h segment
    4844.Int40hAlreadyInstalled:
     45
     46    mov     al, BIOS_DISK_INTERRUPT_13h         ; INT 13h interrupt vector offset
     47    mov     si, Int13h_DiskFunctionsHandler     ; Interrupt handler offset
     48    call    Interrupts_InstallHandlerToVectorInALFromCSSI
    4949    ; Fall to .InitializeHardwareIrqHandlers
    5050
    … …  
    5656;       Nothing
    5757;   Corrupts registers:
    58 ;       BX, CX, DX, SI, DI
     58;       BX, CX, DX, SI, DI, AX
    5959;--------------------------------------------------------------------
    6060.InitializeHardwareIrqHandlers:
    … …  
    6262    mov     di, ROMVARS.ideVars0            ; CS:SI points to first IDEVARS
    6363.IdeControllerLoop:
    64     eMOVZX  bx, BYTE [cs:di+IDEVARS.bIRQ]
     64    mov     al, BYTE [cs:di+IDEVARS.bIRQ]
    6565    add     di, BYTE IDEVARS_size           ; Increment to next controller
    6666    call    .InstallLowOrHighIrqHandler
    … …  
    7272; .InstallLowOrHighIrqHandler
    7373;   Parameters:
    74 ;       BX:     IRQ number, 0 if IRQ disabled
     74;       AL:     IRQ number, 0 if IRQ disabled
    7575;       ES:     BDA and Interrupt Vector segment (zero)
    7676;   Returns:
    … …  
    8080;--------------------------------------------------------------------
    8181.InstallLowOrHighIrqHandler:
    82     test    bl, bl
     82    test    al, al
    8383    jz      SHORT .Return   ; IRQ not used
    84     cmp     bl, 8
     84    cmp     al, 8
    8585    jb      SHORT .InstallLowIrqHandler
    8686    ; Fall to .InstallHighIrqHandler
    … …  
    9494;       Nothing
    9595;   Corrupts registers:
    96 ;       BX, SI
     96;       AL, BX, SI
    9797;--------------------------------------------------------------------
    9898.InstallHighIrqHandler:
    99     add     bx, BYTE HARDWARE_IRQ_8_INTERRUPT_70h - 8   ; Interrupt vector number
     99    add     al, BYTE HARDWARE_IRQ_8_INTERRUPT_70h - 8   ; Interrupt vector number
    100100    mov     si, IdeIrq_InterruptServiceRoutineForIrqs8to15
    101     jmp     SHORT Interrupts_InstallHandlerToVectorInBXFromCSSI
     101    jmp     SHORT Interrupts_InstallHandlerToVectorInALFromCSSI
    102102
    103103;--------------------------------------------------------------------
    104104; .InstallLowIrqHandler
    105105;   Parameters:
    106 ;       BX:     IRQ number (0...7)
    107 ;       ES:     BDA and Interrupt Vector segment (zero)
    108 ;   Returns:
    109 ;       Nothing
    110 ;   Corrupts registers:
    111 ;       BX, SI
     106;       AL:     IRQ number (0...7)
     107;       ES:     BDA and Interrupt Vector segment (zero)
     108;   Returns:
     109;       Nothing
     110;   Corrupts registers:
     111;       AL, BX, SI
    112112;--------------------------------------------------------------------
    113113.InstallLowIrqHandler:
    114     add     bx, BYTE HARDWARE_IRQ_0_INTERRUPT_08h       ; Interrupt vector number
     114    add     al, BYTE HARDWARE_IRQ_0_INTERRUPT_08h       ; Interrupt vector number
    115115    mov     si, IdeIrq_InterruptServiceRoutineForIrqs2to7
    116     ; Fall to Interrupts_InstallHandlerToVectorInBXFromCSSI
    117 
    118 
    119 ;--------------------------------------------------------------------
    120 ; Interrupts_InstallHandlerToVectorInBXFromCSSI
    121 ;   Parameters:
    122 ;       BX:     Interrupt vector number (for example 13h)
     116    ; Fall to Interrupts_InstallHandlerToVectorInALFromCSSI
     117
     118
     119;--------------------------------------------------------------------
     120; Interrupts_InstallHandlerToVectorInALFromCSSI
     121;   Parameters:
     122;       AL:     Interrupt vector number (for example 13h)
    123123;       ES:     BDA and Interrupt Vector segment (zero)
    124124;       CS:SI:  Ptr to interrupt handler
    … …  
    126126;       Nothing
    127127;   Corrupts registers:
    128 ;       BX
    129 ;--------------------------------------------------------------------
    130 Interrupts_InstallHandlerToVectorInBXFromCSSI:
    131     eSHL_IM bx, 2                   ; Shift for DWORD offset
     128;       AX, BX
     129;--------------------------------------------------------------------
     130Interrupts_InstallHandlerToVectorInALFromCSSI:
     131    mov     bl, 4                   ; Shift for DWORD offset, MUL smaller than other alternatives
     132    mul     bl
     133    xchg    ax, bx
    132134    mov     [es:bx], si             ; Store offset
    133135    mov     [es:bx+2], cs           ; Store segment

  • trunk/XTIDE_Universal_BIOS/Src/Main.asm

    r254 r258  
    176176    %include "BootMenuEvent.asm"    ; For menu library event handling
    177177                                    ; NOTE: BootMenuPrint needs to come immediately after BootMenuEvent
    178     %include "BootMenuPrint.asm"    ; For printing Boot Menu strings
     178                                    ;       so that jump table entries in BootMenuEvent stay within 8-bits
     179    %include "BootMenuPrint.asm"    ; For printing Boot Menu strings, also includes "BootMenuPrintCfg.asm"
    179180    %include "BootPrint.asm"        ; For printing boot information
    180     %include "BootMenuPrintCfg.asm" ; For printing hard disk configuration
    181181    %include "FloppyDrive.asm"      ; Floppy Drive related functions
    182182    %include "BootSector.asm"       ; For loading boot sector

  • trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/CreateDPT.asm

    r227 r258  
    6363.StoreFlags:
    6464    mov     [di+DPT.wFlags], ax
    65 
    66 %ifdef MODULE_SERIAL
    67     cmp     byte [cs:bp+IDEVARS.bDevice], DEVICE_SERIAL_PORT
    68     jnz     .StoreAddressing
    69     or      byte [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
    70 %endif
    7165    ; Fall to .StoreAddressing
    7266
    … …  
    205199.StoreDeviceSpecificParameters:
    206200    call    Device_FinalizeDPT
     201
     202%ifdef MODULE_SERIAL_FLOPPY
     203;
     204; These two instructions serve two purposes:
     205; 1. If the drive is a floppy drive (CF set), then we effectively increment the counter.
     206; 2. If this is a hard disk, and there have been any floppy drives previously added, then the hard disk is
     207;    effectively discarded.  This is more of a safety check then code that should ever normally be hit (see below).
     208;    Since the floppy DPT's come after the hard disk DPT's, without expensive (code size) code to relocate a DPT,
     209;    this was necessary.  Now, this situation shouldn't happen in normal operation, for a couple of reasons:
     210;       A. xtidecfg always puts configured serial ports at the end fo the IDEVARS list
     211;       B. the auto serial code is always executed last
     212;       C. the serial server always returns floppy drives last
     213;
     214    adc     byte [RAMVARS.xlateVars+XLATEVARS.bFlopCreateCnt], 0
     215    jnz     .AllDone   
     216%else
     217;
     218; Even without floppy support enabled, we shouldn't try to mount a floppy image as a hard disk, which
     219; could lead to unpredictable results since no MBR will be present, etc.  The server doesn't know that
     220; floppies are supported, so it is important to still fail here if a floppy is seen during the drive scan.
     221;
     222    jc      .AllDone
     223%endif
     224
    207225    ; Fall to .StoreDriveNumberAndUpdateDriveCount
    208226
    … …  
    230248    ja      SHORT .AllDone              ;  If so, return
    231249    mov     [RAMVARS.bFirstDrv], dl     ; Store first drive number
     250
     251.AllDone:
    232252    clc
    233 .AllDone:
    234253    ret
     254

  • trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/FindDPT.asm

    r233 r258  
    1414;       DS:DI:  Ptr to first unused DPT
    1515;   Corrupts registers:
    16 ;       DL
     16;       DX
    1717;--------------------------------------------------------------------
    1818ALIGN JUMP_ALIGN
    1919FindDPT_ForNewDriveToDSDI:
    20     mov     dl, [RAMVARS.bFirstDrv]
    21     add     dl, [RAMVARS.bDrvCnt]
     20    mov     ax, [RAMVARS.wDrvCntAndFirst]
     21    add     al, ah
     22%ifdef MODULE_SERIAL_FLOPPY
     23    add     al, [RAMVARS.xlateVars+XLATEVARS.bFlopCreateCnt]
     24%endif
     25    xchg    ax, dx     
    2226    ; Fall to FindDPT_ForDriveNumber
    2327
    … …  
    4145    xchg    di, ax  ; Save the contents of AX in DI
    4246
     47%ifdef MODULE_SERIAL_FLOPPY
     48    mov     ax, [RAMVARS.wDrvCntAndFirst]
     49       
     50    test    dl, dl
     51    js      .harddisk
     52
     53    call    RamVars_UnpackFlopCntAndFirstToAL
     54    add     dl, ah                      ; add in end of hard disk DPT list, floppies start immediately after
     55.harddisk:
     56    sub     dl, al                      ; subtract off beginning of either hard disk or floppy list (as appropriate)
     57%else
     58    sub     dl, [RAMVARS.bFirstDrv]     ; subtract off beginning of hard disk list
     59%endif
     60       
    4361    mov     al, LARGEST_DPT_SIZE
    44     sub     dl, [RAMVARS.bFirstDrv]
     62       
    4563    mul     dl
    4664    add     ax, BYTE RAMVARS_size
    4765
    48     xchg    di, ax  ; Restore AX and put result in DI
     66    xchg    di, ax                      ; Restore AX and put result in DI
    4967    pop     dx
    5068    ret
    … …  
    89107; IterateToMasterAtPortCallback
    90108;   Parameters:
    91 ;       CH:     Drive number
    92109;       DX:     IDE Base Port address
    93110;       DS:DI:  Ptr to DPT to examine
    94111;   Returns:
    95 ;       DL:     Drive number if correct DPT
    96112;       CF:     Set if wanted DPT found
    97113;               Cleared if wrong DPT
    … …  
    116132    pop     bx
    117133    jne     SHORT ReturnWrongDPT
    118     mov     dl, ch                              ; Return drive number in DL
    119134
    120135ReturnRightDPT:
    … …  
    187202;   Returns:
    188203;       DS:DI:      Ptr to wanted DPT (if found)
     204;                   If not found, points to first empty DPT
    189205;       CF:         Set if wanted DPT found
    190206;                   Cleared if DPT not found, or no DPTs present
    … …  
    195211IterateAllDPTs:
    196212    push    cx
    197     mov     cx, [RAMVARS.wDrvCntAndFirst]
     213
     214    mov     cl, [RAMVARS.bDrvCnt]       
     215    mov     ch, 0
     216       
     217    mov     di, RAMVARS_size            ; Point DS:DI to first DPT
     218       
    198219    jcxz    .NotFound                   ; Return if no drives
    199     mov     di, RAMVARS_size            ; Point DS:DI to first DPT
     220       
    200221ALIGN JUMP_ALIGN
    201222.LoopWhileDPTsLeft:
    202223    call    si                          ; Is wanted DPT?
    203224    jc      SHORT .AllDptsIterated      ;  If so, return
    204     inc     ch                          ; Increment drive number
    205225    add     di, BYTE LARGEST_DPT_SIZE   ; Point to next DPT
    206     dec     cl                          ; Decrement drives left
    207     jnz     SHORT .LoopWhileDPTsLeft
     226    loop    .LoopWhileDPTsLeft
     227       
    208228.NotFound:     
    209229    clc                                 ; Clear CF since DPT not found
     230       
    210231ALIGN JUMP_ALIGN
    211232.AllDptsIterated:

  • trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/RamVars.asm

    r241 r258  
    123123;       DS:     RAMVARS segment
    124124;   Returns:
    125 ;       CF:     Set if function is handled by this BIOS
    126 ;               Cleared if function belongs to some other BIOS
     125;       CF:     Cleared if function is handled by this BIOS
     126;               Set if function belongs to some other BIOS
    127127;   Corrupts registers:
    128128;       Nothing
    … …  
    131131RamVars_IsFunctionHandledByThisBIOS:
    132132    test    ah, ah          ; Reset for all floppy and hard disk drives?
    133     jz      SHORT .FunctionIsHandledByOurBIOS
    134     cmp     ah, 08h         ; Read Disk Drive Parameters?
    135     jne     SHORT RamVars_IsDriveHandledByThisBIOS
    136     test    dl, dl          ; We do not handle floppy drives
    137     jns     SHORT .FunctionIsNotHandledByOurBIOS
    138 ALIGN JUMP_ALIGN
    139 .FunctionIsHandledByOurBIOS:
    140     stc
    141 .FunctionIsNotHandledByOurBIOS:
    142     ret
    143 
     133    jz      SHORT RamVars_IsDriveHandledByThisBIOS.CFAlreadyClear_IsHandledByOurBIOS
     134    cmp     ah, 08h
     135%ifdef MODULE_SERIAL_FLOPPY
     136; we handle all traffic for function 08h, as we need to wrap both hard disk and floppy drive counts
     137    je      SHORT RamVars_IsDriveHandledByThisBIOS.CFAlreadyClear_IsHandledByOurBIOS
     138%else
     139; we handle all *hard disk* traffic for function 08h, as we need to wrap the hard disk drive count
     140    je      SHORT RamVars_IsDriveHandledByThisBIOS.IsDriveAHardDisk
     141%endif
     142;;; fall-through           
     143       
    144144;--------------------------------------------------------------------
    145145; Checks if drive is handled by this BIOS.
    … …  
    150150;       DS:     RAMVARS segment
    151151;   Returns:
    152 ;       CF:     Set if drive is handled by this BIOS
    153 ;               Cleared if drive belongs to some other BIOS
     152;       CF:     Cleared if drive is handled by this BIOS
     153;               Set if drive belongs to some other BIOS
    154154;   Corrupts registers:
    155155;       Nothing
    … …  
    158158RamVars_IsDriveHandledByThisBIOS:
    159159    push    ax
    160     mov     ax, [RAMVARS.wDrvCntAndFirst]       ; Drive count to AL, First number to AH
    161     add     al, ah                              ; One past last drive to AL
    162     cmp     dl, al                              ; Above last supported?
    163     jae     SHORT .DriveNotHandledByThisBIOS
    164     cmp     ah, dl                              ; Below first supported?
    165     ja      SHORT .DriveNotHandledByThisBIOS
    166     stc
    167 .DriveNotHandledByThisBIOS:
     160
     161    mov     ax, [RAMVARS.wDrvCntAndFirst]       ; Drive count to AH, First number to AL
     162    add     ah, al                              ; One past last drive to AH
     163    cmp     dl, ah                              ; Above last supported?
     164    jae     SHORT .HardDiskIsNotHandledByThisBIOS
     165.TestLowLimit:
     166    cmp     dl, al                              ; Below first supported?
     167    jae     SHORT .CFAlreadyClear_IsHandledByOurBIOS_PopAX  ; note that CF is clear if the branch is taken
     168
     169.HardDiskIsNotHandledByThisBIOS:
     170%ifdef MODULE_SERIAL_FLOPPY
     171    call    RamVars_UnpackFlopCntAndFirstToAL
     172    cbw                                         ; normally 0h, could be ffh if no drives present
     173    adc     ah, al                              ; if no drives present, still ffh (ffh + ffh + 1 = ffh)
     174    js      SHORT .DiskIsNotHandledByThisBIOS
     175    cmp     ah, dl
     176    jz      SHORT .CFAlreadyClear_IsHandledByOurBIOS_PopAX
     177    cmp     al, dl
     178    jz      SHORT .CFAlreadyClear_IsHandledByOurBIOS_PopAX
     179.DiskIsNotHandledByThisBIOS:           
     180%endif
     181
     182    stc                                         ; Is not supported by our BIOS
     183       
     184.CFAlreadyClear_IsHandledByOurBIOS_PopAX:               
    168185    pop     ax
    169     ret
    170 
    171 
    172 ;--------------------------------------------------------------------
    173 ; RamVars_GetHardDiskCountFromBDAtoCX
    174 ;   Parameters:
    175 ;       DS:     RAMVARS segment
    176 ;   Returns:
    177 ;       CX:     Total hard disk count
    178 ;   Corrupts registers:
    179 ;       Nothing
    180 ;--------------------------------------------------------------------
    181 ALIGN JUMP_ALIGN
    182 RamVars_GetHardDiskCountFromBDAtoCX:
     186.CFAlreadyClear_IsHandledByOurBIOS:
     187    ret
     188
     189%ifndef MODULE_SERIAL_FLOPPY       
     190;
     191; Note that we could have just checked for the high order bit in dl, but with the needed STC and jumps,
     192; leveraging the code above resulted in space savings.
     193;
     194.IsDriveAHardDisk:     
     195    push    ax                                  ; match stack at the top of routine
     196    mov     al, 80h                             ; to catch all hard disks, lower limit is 80h vs. bFirstDrv
     197    jmp     .TestLowLimit                       ; and there is no need to test a high limit
     198%endif
     199
     200;--------------------------------------------------------------------
     201; RamVars_GetHardDiskCountFromBDAtoAX
     202;   Parameters:
     203;       DS:     RAMVARS segment
     204;   Returns:
     205;       AX:     Total hard disk count
     206;   Corrupts registers:
     207;       CX
     208;--------------------------------------------------------------------
     209ALIGN JUMP_ALIGN
     210RamVars_GetHardDiskCountFromBDAtoAX:
    183211    push    es
    184     push    dx
    185 
    186     LOAD_BDA_SEGMENT_TO es, cx, !       ; Zero CX
    187     call    RamVars_GetCountOfKnownDrivesToDL
     212
     213    LOAD_BDA_SEGMENT_TO es, ax
     214    call    RamVars_GetCountOfKnownDrivesToAX
    188215    mov     cl, [es:BDA.bHDCount]
    189     MAX_U   cl, dl
    190 
    191     pop     dx
     216    MAX_U   al, cl
     217       
    192218    pop     es
    193219    ret
    194220
    195221;--------------------------------------------------------------------
    196 ; RamVars_GetCountOfKnownDrivesToDL
    197 ;   Parameters:
    198 ;       DS:     RAMVARS segment
    199 ;   Returns:
    200 ;       DL:     Total hard disk count
    201 ;   Corrupts registers:
    202 ;       Nothing
    203 ;--------------------------------------------------------------------
    204 ALIGN JUMP_ALIGN
    205 RamVars_GetCountOfKnownDrivesToDL:
    206     mov     dl, [RAMVARS.bFirstDrv]     ; Number for our first drive
    207     add     dl, [RAMVARS.bDrvCnt]       ; Our drives
    208     and     dl, 7Fh                     ; Clear HD bit for drive count
    209     ret
    210 
    211 
     222; RamVars_GetCountOfKnownDrivesToAX
     223;   Parameters:
     224;       DS:     RAMVARS segment
     225;   Returns:
     226;       AX:     Total hard disk count
     227;   Corrupts registers:
     228;       None
     229;--------------------------------------------------------------------
     230ALIGN JUMP_ALIGN
     231RamVars_GetCountOfKnownDrivesToAX:
     232    mov     ax, [RAMVARS.wDrvCntAndFirst]
     233    add     al, ah
     234    and     al, 7fh
     235    cbw
     236    ret
     237   
    212238;--------------------------------------------------------------------
    213239; RamVars_GetIdeControllerCountToCX
    … …  
    219245;       Nothing
    220246;--------------------------------------------------------------------
     247ALIGN JUMP_ALIGN
    221248RamVars_GetIdeControllerCountToCX:
    222249    eMOVZX  cx, BYTE [cs:ROMVARS.bIdeCnt]
    223250    ret
     251
     252%ifdef MODULE_SERIAL_FLOPPY
     253;--------------------------------------------------------------------
     254; RamVars_UnpackFlopCntAndFirstToAL
     255;   Parameters:
     256;       Nothing
     257;   Returns:
     258;       AL:     First floppy drive number supported
     259;       CF:     Number of floppy drives supported (clear = 1, set = 2)
     260;   Corrupts registers:
     261;       Nothing
     262;--------------------------------------------------------------------       
     263ALIGN JUMP_ALIGN
     264RamVars_UnpackFlopCntAndFirstToAL:
     265    mov     al, [RAMVARS.xlateVars+XLATEVARS.bFlopCntAndFirst]
     266    sar     al, 1       
     267    ret
     268%endif

  • trunk/XTIDE_Universal_BIOS/makefile

    r252 r258  
    6666# Assembler preprocessor defines.                               #
    6767#################################################################
    68 DEFINES = INCLUDE_MENU_LIBRARY EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS MODULE_EBIOS MODULE_SERIAL MODULE_STRINGS_COMPRESSED
     68DEFINES = INCLUDE_MENU_LIBRARY EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS MODULE_EBIOS MODULE_SERIAL MODULE_STRINGS_COMPRESSED MODULE_SERIAL_FLOPPY
    6969DEFINES_XT = ELIMINATE_CGA_SNOW
    7070DEFINES_XTPLUS = ELIMINATE_CGA_SNOW USE_186
Note: See TracChangeset for help on using the changeset viewer.