Changeset 200 in xtideuniversalbios for trunk/XTIDE_Universal_BIOS_Configurator_v2/Src

Timestamp:

Nov 22, 2011, 8:38:36 AM (13 years ago)

Author:

gregli@…

google:author:

gregli@hotmail.com

Message:

Added logic to skip scanning COM ports if a COM port was already found during the normal detection process, to avoid finding the same serial drive twice and preseting the OS with two drives which in reality point to the same physical file on the server. Also added logic to skip scanning for the slave serial drive if the master was not found. And various small optimizations.

Location:

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src

Files:

• Menupages/IdeControllerMenu.asm (modified) (2 diffs)
• Strings.asm (modified) (1 diff)

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Menupages/IdeControllerMenu.asm

@@ -119 +119 @@
     at  MENUITEM.itemValue + ITEM_VALUE.wRomvarsValueOffset,        dw  NULL
     at  MENUITEM.itemValue + ITEM_VALUE.szDialogTitle,              dw  g_szDlgIdeCmdPort
-    at  MENUITEM.itemValue + ITEM_VALUE.wMinValue,                  dw  240h
-    at  MENUITEM.itemValue + ITEM_VALUE.wMaxValue,                  dw  438h
+    at  MENUITEM.itemValue + ITEM_VALUE.wMinValue,                  dw  DEVICE_SERIAL_PACKEDPORTANDBAUD_MINPORT
+    at  MENUITEM.itemValue + ITEM_VALUE.wMaxValue,                  dw  DEVICE_SERIAL_PACKEDPORTANDBAUD_MAXPORT
     at  MENUITEM.itemValue + ITEM_VALUE.fnValueReader,              dw  IdeControllerMenu_SerialReadPort
     at  MENUITEM.itemValue + ITEM_VALUE.fnValueWriter,              dw  IdeControllerMenu_SerialWritePort
@@ -538 +538 @@
 .custom:
         mov     al,'x'                              ; ASCII value 'x' for custom
-        mov     ah,0                                ; 240h is default custom value
+        mov     ah,1 << DEVICE_SERIAL_PACKEDPORTANDBAUD_PORT_FIELD_POSITION ; 248h 
         jmp     IdeControllerMenu_SerialWriteCOM_PackAndRet
 

trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Strings.asm

@@ -135 +135 @@
 g_szNfoIdeSerialCOM:    db  "Select a COM port by number.",NULL
 g_szNfoIdeSerialBaud:   db  "Select the COM port's Baud Rate. The server must match this speed. Note UART clock multipliers may impact the actual speed.",NULL
-g_szNfoIdeSerialPort:   db  "Select a COM port by custom I/O port address. Address must be in the range 240h and 438h and be on an 8-byte boundary.", NULL
+g_szNfoIdeSerialPort:   db  "Select a COM port by custom I/O port address. Address must be in the range 248h to 438h and be on an 8-byte boundary.", NULL
 
 g_szHelpIdeCmdPort:     incbin  "IDE_CommandPort.txt"