source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS_Configurator_v2/makefile@ 592

Last change on this file since 592 was 592, checked in by Krister Nordvall, 6 years ago

Changes:

  • The problem with NASM in the previous revision (r591) has been fixed.
  • The colors used by the boot menu and hotkey bar can now be customized by selecting one of a number of pre-defined color themes. Suggestions for additional themes are more than welcome!
  • Large builds are now 10 KB. Small builds are still 8 KB with the exception of the Tiny build which is now 4 KB. In other words, builds are now as small as possible to make it easier to combine them with other BIOSes.
  • Added code to the library to improve drive error handling. XTIDECFG can now handle "Drive Not Ready" errors.
  • Fixed a couple of potential bugs in AtaID.asm (AtaID_GetMaxPioModeToAXandMinCycleTimeToCX); 1) ATA1.bPioMode was treated as a WORD variable. 2) ATA2.bPIOSupp was assumed to be non-zero which would result in PIO mode 3 being returned if the assumption was wrong.
  • Made the same changes in the equivalent function used by BIOSDRVS (DisplayPioModeInformationUsingAtaInfoFromDSBX in AtaInfo.asm).
  • Fixed a bug from r587 in PDC20x30.asm in PDC20x30_GetMaxPioModeToALandMinPioCycleTimeToBX.
  • Fixed a bug from r523 in XTIDECFG where Auto Configure would only set the IRQ on one IDE interface on AT-builds.
  • XTIDECFG will now restore the default settings for the "Serial port virtual device" when reselecting it in the list of device types. This makes it behave consistently for all device types.
  • The eAAM macro is now used regardless if USE_UNDOC_INTEL is defined or not because it is apparently supported on all processors including the NEC V20/V30 CPUs.
  • Renamed the EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS define to EXCLUDE_FROM_XUB.
  • Added a define to exclude unused library code from BIOSDRVS (EXCLUDE_FROM_BIOSDRVS). This makes it a lot smaller than in previous revisions.
  • All unnecessary CLD-instructions are now under a new define 'CLD_NEEDED' which is only enabled for the BIOS. It is disabled for XTIDECFG and BIOSDRVS but can be enabled if needed by adding this define to the respective makefile. This change was made because these unnecessary instructions are wasteful and should never be needed. In fact, they only serve to hide bugs (in other peoples code) which I strongly believe should be avoided. I recommend people making their own BIOSes from source to not use this define as it's extremely unlikely to be needed.
  • Updated the copyright info in SerDrive and changed an URL to point to the new site.
  • Updated the copyright info and version number in BIOSDRVS.
  • Updated the copyright info in XTIDECFG.
  • Optimizations in general.
File size: 4.3 KB
RevLine 
[57]1###############################################################################
[293]2# Makefile to build XTIDE Universal BIOS Configurator v2. #
[57]3# #
4# Valid makefile targets are: #
5# all Removes existing files and builds binary file in \Build #
6# clean Removes all files from \Build #
7# #
8# Build directory must be created manually if it does not exist. #
9# #
10###############################################################################
11
12###########################################
13# Source files and destination executable #
14###########################################
15
16# Assembly source code file (*.asm):
17SRC_ASM = Src/Main.asm
18
19# Program executable file name without extension:
20PROG = xtidecfg
21EXTENSION = com
22
23
24#######################################
25# Destination and include directories #
26#######################################
27
28# Directory where binary file will be compiled to
29BUILD_DIR = Build
30
31# Subdirectories where included files are:
32HEADERS = Inc/
[68]33HEADERS += Inc/Help/
[57]34HEADERS += Src/
35HEADERS += Src/Menupages/
36
37# Subdirectories where library files are:
[59]38LIBS = ../Assembly_Library/Inc/
39LIBS += ../Assembly_Library/Src/
40LIBS += ../Assembly_Library/Src/Display/
41LIBS += ../Assembly_Library/Src/File/
42LIBS += ../Assembly_Library/Src/Keyboard/
43LIBS += ../Assembly_Library/Src/Menu/
44LIBS += ../Assembly_Library/Src/Menu/Dialog/
45LIBS += ../Assembly_Library/Src/String/
46LIBS += ../Assembly_Library/Src/Time/
47LIBS += ../Assembly_Library/Src/Util/
[57]48LIBS += ../XTIDE_Universal_BIOS/Inc/
[481]49LIBS += ../XTIDE_Universal_BIOS/Inc/Controllers/
[57]50HEADERS += $(LIBS)
51
52
53#################################################################
54# Assembler preprocessor defines. #
55#################################################################
[181]56DEFINES = EXCLUDE_FROM_XTIDECFG
[57]57DEFINES_XT = ELIMINATE_CGA_SNOW
58DEFINES_XTPLUS = USE_186 ELIMINATE_CGA_SNOW
[293]59DEFINES_AT = USE_286 USE_AT
[57]60
61
62###################
63# Other variables #
64###################
65
66# Add -D in front of every preprocessor define declaration
67DEFS = $(DEFINES:%=-D%)
68DEFS_XT = $(DEFINES_XT:%=-D%)
69DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%)
70DEFS_AT = $(DEFINES_AT:%=-D%)
71
72# Add -I in front of all header directories
73IHEADERS = $(HEADERS:%=-I%)
74
[145]75# Path + target file to be built
[57]76TARGET = $(BUILD_DIR)/$(PROG)
77
78
79#########################
80# Compilers and linkers #
81#########################
82
83# Make
84MAKE = mingw32-make.exe
85
86# Assembler
[187]87AS = nasm.exe
[57]88
89# use this command to erase files.
90RM = -del /Q
91
92
93#############################
94# Compiler and linker flags #
95#############################
96
97# Assembly compiler flags
98ASFLAGS = -f bin # Produce binary object files
99ASFLAGS += $(DEFS) # Preprocessor defines
100ASFLAGS += $(IHEADERS) # Set header file directory paths
101ASFLAGS += -Worphan-labels # Warn about labels without colon
[592]102ASFLAGS += -Ox # Optimize operands to their shortest forms
[57]103
104
105############################################
106# Build process. Actual work is done here. #
107############################################
108
[145]109.PHONY: all at xtplus xt clean release
[57]110
[425]111all: clean release
[145]112 @echo All done!
[57]113
114at:
[82]115 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.$(EXTENSION)"
[145]116 @echo AT version "$(TARGET)_at.$(EXTENSION)" built.
[57]117
118xtplus:
[82]119 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.$(EXTENSION)"
[293]120 @echo XT Plus version "$(TARGET)_xtp.$(EXTENSION)" built.
[57]121
122xt:
[82]123 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET).$(EXTENSION)"
[145]124 @echo XT version "$(TARGET).$(EXTENSION)" built.
[57]125
126clean:
127 @$(RM) $(BUILD_DIR)\*.*
128 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
[145]129
130release: xt
131 @echo Compressing with UPX...
132 @upx -qq --8086 --ultra-brute $(TARGET).$(EXTENSION)
133 @echo Done! XT version is ready for release.
[370]134
135xt_unused: xt
136 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_xt_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]137 @perl ..\Tools\unused.pl $(TARGET)_xt.lst $(TARGET)_xt_unused.asm
[370]138
Note: See TracBrowser for help on using the repository browser.