| 1 | ; Project name : XTIDE Universal BIOS Configurator v2
|
|---|
| 2 | ; Description : All strings.
|
|---|
| 3 |
|
|---|
| 4 | ; Section containing initialized data
|
|---|
| 5 | SECTION .data
|
|---|
| 6 |
|
|---|
| 7 | ; Menu title
|
|---|
| 8 | g_szProgramTitle:
|
|---|
| 9 | db "Configuration and Flashing program for XTIDE Universal BIOS v2.0.0.",LF,CR,NULL
|
|---|
| 10 | g_szXtideUniversalBiosSignature: db "XTIDE200",NULL
|
|---|
| 11 | g_szBiosIsNotLoaded: db "BIOS is not loaded!",NULL
|
|---|
| 12 | g_szEEPROM: db "EEPROM",NULL
|
|---|
| 13 | g_szSourceAndTypeSeparator: db " : ",NULL
|
|---|
| 14 | g_szUnidentified: db "Unidentified",NULL
|
|---|
| 15 | g_szUnsaved: db " ",SINGLE_LEFT_HORIZONTAL_TO_VERTICAL,
|
|---|
| 16 | db "Unsaved",SINGLE_RIGHT_HORIZONTAL_TO_VERTICAL,NULL
|
|---|
| 17 |
|
|---|
| 18 | ; Item formatting
|
|---|
| 19 | g_szFormatItemWithoutValue: db "%c%s",NULL
|
|---|
| 20 | g_szFormatItemNameWithValue: db "%25s%-10S",NULL
|
|---|
| 21 |
|
|---|
| 22 |
|
|---|
| 23 | g_szNo: db "No",NULL
|
|---|
| 24 | g_szMultichoiceBooleanFlag:
|
|---|
| 25 | db "No",LF
|
|---|
| 26 | g_szYes: db "Yes",NULL
|
|---|
| 27 |
|
|---|
| 28 | ; Exit messages
|
|---|
| 29 | g_szDlgExitToDos: db "Exit to DOS?",NULL
|
|---|
| 30 | g_szDlgSaveChanges: db "Do you want to save changes to XTIDE Universal BIOS image file?",NULL
|
|---|
| 31 |
|
|---|
| 32 |
|
|---|
| 33 | ; Generic dialog strings
|
|---|
| 34 | g_szNotificationDialog: db "Notification.",NULL
|
|---|
| 35 | g_szErrorDialog: db "Error!",NULL
|
|---|
| 36 | g_szGenericDialogInfo: db "Press ENTER or ESC to close dialog.",NULL
|
|---|
| 37 |
|
|---|
| 38 | ; Flashing related strings
|
|---|
| 39 | g_szFlashTitle: db "Flashing EEPROM, please wait.",NULL
|
|---|
| 40 | g_szErrEepromTooSmall: db "Image is too large for selected EEPROM type!",NULL
|
|---|
| 41 | g_szErrEepromPolling: db "Timeout when polling EEPROM.",LF
|
|---|
| 42 | db "EEPROM was not flashed properly!",NULL
|
|---|
| 43 | g_szErrEepromVerify: db "EEPROM did not return the same byte that was written.",LF
|
|---|
| 44 | db "EEPROM was not flashed properly!",NULL
|
|---|
| 45 | g_szPCFlashSuccessful: db "EEPROM was written successfully.",LF
|
|---|
| 46 | db "Press any key to reboot.",NULL
|
|---|
| 47 | g_szForeignFlash: db "EEPROM was written successfully.",NULL
|
|---|
| 48 |
|
|---|
| 49 |
|
|---|
| 50 | ; Strings for main menu
|
|---|
| 51 | g_szItemMainExitToDOS: db "Exit to DOS",NULL
|
|---|
| 52 | g_szItemMainLoadFile: db "Load BIOS from file",NULL
|
|---|
| 53 | g_szItemMainLoadROM: db "Load BIOS from EEPROM",NULL
|
|---|
| 54 | g_szItemMainLoadStngs: db "Load old settings from EEPROM",NULL
|
|---|
| 55 | g_szItemMainConfigure: db "Configure XTIDE Universal BIOS",NULL
|
|---|
| 56 | g_szItemMainFlash: db "Flash EEPROM",NULL
|
|---|
| 57 |
|
|---|
| 58 | g_szDlgMainLoadROM: db "Successfully loaded XTIDE Universal BIOS from EEPROM.",NULL
|
|---|
| 59 | g_szDlgMainLoadStngs: db "Successfully loaded settings from EEPROM.",NULL
|
|---|
| 60 | g_szDlgMainLoadFile: db "Successfully loaded file for flashing.",NULL
|
|---|
| 61 | g_szDlgMainSaveFile: db "Successfully saved XTIDE Universal BIOS to file.",NULL
|
|---|
| 62 | g_szDlgMainFileTooBig: db "Selected file is too big to be loaded for flashing!",NULL
|
|---|
| 63 | g_szDlgMainLoadErr: db "Failed to load file!",NULL
|
|---|
| 64 | g_szDlgMainSaveErr: db "Failed to save file!",NULL
|
|---|
| 65 | g_szDlgFileTitle: db "Select file to be flashed.",NULL
|
|---|
| 66 | g_szDlgFileFilter: db "*.*",NULL
|
|---|
| 67 |
|
|---|
| 68 |
|
|---|
| 69 | g_szNfoMainExitToDOS: db "Quits XTIDE Universal BIOS Configurator.",NULL
|
|---|
| 70 | g_szNfoMainLoadFile: db "Load BIOS file to be configured or flashed.",NULL
|
|---|
| 71 | g_szNfoMainLoadROM: db "Load BIOS from EEPROM to be reconfigured.",NULL
|
|---|
| 72 | g_szNfoMainLoadStngs: db "Load old XTIDE Universal BIOS settings from EEPROM.",NULL
|
|---|
| 73 | g_szNfoMainConfigure: db "Configure XTIDE Universal BIOS settings.",NULL
|
|---|
| 74 | g_szNfoMainFlash: db "Flash loaded BIOS image to EEPROM.",NULL
|
|---|
| 75 |
|
|---|
| 76 |
|
|---|
| 77 | ; Strings for XTIDE Universal BIOS configuration menu
|
|---|
| 78 | g_szItemCfgBackToMain: db "Back to Main Menu",NULL
|
|---|
| 79 | g_szItemCfgIde1: db "Primary IDE Controller",NULL
|
|---|
| 80 | g_szItemCfgIde2: db "Secondary IDE Controller",NULL
|
|---|
| 81 | g_szItemCfgIde3: db "Tertiary IDE Controller",NULL
|
|---|
| 82 | g_szItemCfgIde4: db "Quaternary IDE Controller",NULL
|
|---|
| 83 | g_szItemCfgBootMenu: db "Boot settings",NULL
|
|---|
| 84 | g_szItemCfgFullMode: db "Full operating mode",NULL
|
|---|
| 85 | g_szItemCfgStealSize: db "kiB to steal from RAM",NULL
|
|---|
| 86 | g_szItemCfgIdeCnt: db "IDE controllers",NULL
|
|---|
| 87 |
|
|---|
| 88 | g_szDlgCfgFullMode: db "Enable full operating mode?",NULL
|
|---|
| 89 | g_szDlgCfgStealSize: db "How many kiB of base memory to steal for XTIDE Universal BIOS variables (1...255)?",NULL
|
|---|
| 90 | g_szDlgCfgIdeCnt: db "How many IDE controllers to manage (1...4)?",NULL
|
|---|
| 91 |
|
|---|
| 92 | g_szNfoCfgIde: db "IDE controller and drive configuration.",NULL
|
|---|
| 93 | g_szNfoCfgBootMenu: db "Boot configuration.",NULL
|
|---|
| 94 | g_szNfoCfgFullMode: db "Full mode supports multiple controllers and has more features.",NULL
|
|---|
| 95 | g_szNfoCfgStealSize: db "How many kiB's to steal from Conventional memory for XTIDE Universal BIOS variables.",NULL
|
|---|
| 96 | g_szNfoCfgIdeCnt: db "Number of IDE controllers to manage.",NULL
|
|---|
| 97 |
|
|---|
| 98 | g_szSerialMoved: db "A Serial Controller has been moved to the end of the Controller list. No further action is required. Serial Controllers must be placed at the end of the list.",NULL
|
|---|
| 99 |
|
|---|
| 100 | g_szHelpCfgFullMode: incbin "Configuration_FullMode.txt"
|
|---|
| 101 | db NULL
|
|---|
| 102 | g_szHelpCfgStealSize: incbin "Configuration_StealSize.txt"
|
|---|
| 103 | db NULL
|
|---|
| 104 |
|
|---|
| 105 | ; Strings for IDE Controller menu
|
|---|
| 106 | g_szItemBackToCfgMenu: db "Back to Configuration Menu",NULL
|
|---|
| 107 | g_szItemIdeMaster: db "Master Drive",NULL
|
|---|
| 108 | g_szItemIdeSlave: db "Slave Drive",NULL
|
|---|
| 109 | g_szItemIdeDevice: db "Device type",NULL
|
|---|
| 110 | g_szItemIdeCmdPort: db "Base (cmd block) address",NULL
|
|---|
| 111 | g_szItemIdeCtrlPort: db "Control block address",NULL
|
|---|
| 112 | g_szItemIdeEnIRQ: db "Enable interrupt",NULL
|
|---|
| 113 | g_szItemIdeIRQ: db "IRQ",NULL
|
|---|
| 114 | g_szItemSerialCOM: db "COM Port",NULL
|
|---|
| 115 | g_szItemSerialBaud: db "Baud Rate",NULL
|
|---|
| 116 | g_szItemSerialPort: db "COM Port I/O address",NULL
|
|---|
| 117 |
|
|---|
| 118 | g_szItemIdeSerialComPort: db "COM port",NULL
|
|---|
| 119 | g_szItemIdeSerialBaudRate: db "Baud rate",NULL
|
|---|
| 120 |
|
|---|
| 121 | g_szDlgDevice: db "Select controller type.",NULL
|
|---|
| 122 | g_szDlgIdeCmdPort: db "Enter IDE command block (base port) address.",NULL
|
|---|
| 123 | g_szDlgIdeCtrlPort: db "Enter IDE control block address (usually command block + 200h).",NULL
|
|---|
| 124 | g_szDlgIdeEnIRQ: db "Enable interrupt?",NULL
|
|---|
| 125 | g_szDlgIdeIRQ: db "Enter IRQ channel (2...7 for 8-bit controllers, 2...15 for any other controller).",NULL
|
|---|
| 126 |
|
|---|
| 127 | g_szNfoIdeBackToCfgMenu:db "Back to XTIDE Universal BIOS Configuration Menu.",NULL
|
|---|
| 128 | g_szNfoIdeMaster: db "Settings for Master Drive.",NULL
|
|---|
| 129 | g_szNfoIdeSlave: db "Settings for Slave Drive.",NULL
|
|---|
| 130 | g_szNfoIdeDevice: db "Select controller device type.",NULL
|
|---|
| 131 | g_szNfoIdeCmdPort: db "IDE Controller Command Block (base port) address.",NULL
|
|---|
| 132 | g_szNfoIdeCtrlPort: db "IDE Controller Control Block address. Usually Cmd Block + 8 for XTIDE, and Cmd Block + 200h for ATA.",NULL
|
|---|
| 133 | g_szNfoIdeEnIRQ: db "Interrupt or polling mode.",NULL
|
|---|
| 134 | g_szNfoIdeIRQ: db "IRQ channel to use.",NULL
|
|---|
| 135 | g_szNfoIdeSerialCOM: db "Select a COM port by number.",NULL
|
|---|
| 136 | g_szNfoIdeSerialBaud: db "Select the COM port's Baud Rate. The server must match this speed. Note that UART clock multipliers may impact the actual speed.",NULL
|
|---|
| 137 | g_szNfoIdeSerialPort: db "Select a COM port by custom I/O port address. Any address is valid up to 3f8h, but must be on an 8-byte boundary.",NULL
|
|---|
| 138 |
|
|---|
| 139 | g_szHelpIdeCmdPort: incbin "IDE_CommandPort.txt"
|
|---|
| 140 | db NULL
|
|---|
| 141 | g_szHelpIdeCtrlPort: incbin "IDE_ControlPort.txt"
|
|---|
| 142 | db NULL
|
|---|
| 143 | g_szHelpIdeEnIRQ: incbin "IDE_EnableInterrupt.txt"
|
|---|
| 144 | db NULL
|
|---|
| 145 | g_szHelpIdeIRQ: incbin "IDE_IRQ.txt"
|
|---|
| 146 | db NULL
|
|---|
| 147 | g_szHelpIdeSerialCOM: incbin "IDE_SerialCOM.txt"
|
|---|
| 148 | db NULL
|
|---|
| 149 | g_szHelpIdeSerialPort: incbin "IDE_SerialPort.txt"
|
|---|
| 150 | db NULL
|
|---|
| 151 | g_szHelpIdeSerialBaud: incbin "IDE_SerialBaud.txt"
|
|---|
| 152 | db NULL
|
|---|
| 153 |
|
|---|
| 154 | g_szMultichoiceCfgDevice:
|
|---|
| 155 | db "8-bit dual port (XTIDE)",LF
|
|---|
| 156 | db "XTIDE mod (A0<->A3)",LF
|
|---|
| 157 | db "8-bit single port",LF
|
|---|
| 158 | db "16-bit standard IDE",LF
|
|---|
| 159 | db "32-bit generic IDE",LF
|
|---|
| 160 | db "Serial port virtual device",LF
|
|---|
| 161 | db "JR-IDE/ISA",NULL
|
|---|
| 162 |
|
|---|
| 163 | g_szSerialCOMChoice:
|
|---|
| 164 | db "COM1 - address 3f8h",LF
|
|---|
| 165 | db "COM2 - address 2f8h",LF
|
|---|
| 166 | db "COM3 - address 3e8h",LF
|
|---|
| 167 | db "COM4 - address 2e8h",LF
|
|---|
| 168 | db "COM5 - address 2f0h",LF
|
|---|
| 169 | db "COM6 - address 3e0h",LF
|
|---|
| 170 | db "COM7 - address 2e0h",LF
|
|---|
| 171 | db "COM8 - address 260h",LF
|
|---|
| 172 | db "COM9 - address 368h",LF
|
|---|
| 173 | db "COMA - address 268h",LF
|
|---|
| 174 | db "COMB - address 360h",LF
|
|---|
| 175 | db "COMC - address 270h",LF
|
|---|
| 176 | db "COMx - Custom address",NULL
|
|---|
| 177 |
|
|---|
| 178 | g_szValueCfgCOM1: db "COM1",NULL
|
|---|
| 179 | g_szValueCfgCOM2: db "COM2",NULL
|
|---|
| 180 | g_szValueCfgCOM3: db "COM3",NULL
|
|---|
| 181 | g_szValueCfgCOM4: db "COM4",NULL
|
|---|
| 182 | g_szValueCfgCOM5: db "COM5",NULL
|
|---|
| 183 | g_szValueCfgCOM6: db "COM6",NULL
|
|---|
| 184 | g_szValueCfgCOM7: db "COM7",NULL
|
|---|
| 185 | g_szValueCfgCOM8: db "COM8",NULL
|
|---|
| 186 | g_szValueCfgCOM9: db "COM9",NULL
|
|---|
| 187 | g_szValueCfgCOMA: db "COMA",NULL
|
|---|
| 188 | g_szValueCfgCOMB: db "COMB",NULL
|
|---|
| 189 | g_szValueCfgCOMC: db "COMC",NULL
|
|---|
| 190 | g_szValueCfgCOMx: db "Custom",NULL
|
|---|
| 191 |
|
|---|
| 192 | g_szSerialBaudChoice:
|
|---|
| 193 | db "115.2K baud",LF
|
|---|
| 194 | db "57.6K baud",LF
|
|---|
| 195 | db "38.4K baud",LF
|
|---|
| 196 | db "28.8K baud",LF
|
|---|
| 197 | db "19.2K baud",LF
|
|---|
| 198 | db "9600 baud",LF
|
|---|
| 199 | db "4800 baud",LF
|
|---|
| 200 | db "2400 baud",NULL
|
|---|
| 201 |
|
|---|
| 202 | g_szValueCfgBaud115_2: db "115.2K",NULL
|
|---|
| 203 | g_szValueCfgBaud57_6: db "57.6K",NULL
|
|---|
| 204 | g_szValueCfgBaud38_4: db "38.4K",NULL
|
|---|
| 205 | g_szValueCfgBaud28_8: db "28.8K",NULL
|
|---|
| 206 | g_szValueCfgBaud19_2: db "19.2K",NULL
|
|---|
| 207 | g_szValueCfgBaud9600: db "9600",NULL
|
|---|
| 208 | g_szValueCfgBaud4800: db "4800",NULL
|
|---|
| 209 | g_szValueCfgBaud2400: db "2400",NULL
|
|---|
| 210 |
|
|---|
| 211 |
|
|---|
| 212 | g_szValueCfgDeviceDual8b: db "XTIDE",NULL
|
|---|
| 213 | g_szValueCfgDeviceMod: db "XTIDEmod",NULL
|
|---|
| 214 | g_szValueCfgDeviceSingle8b: db "8-bit",NULL
|
|---|
| 215 | g_szValueCfgDevice16b: db "16-bit",NULL
|
|---|
| 216 | g_szValueCfgDevice32b: db "32-bit",NULL
|
|---|
| 217 | g_szValueCfgDeviceSerial: db "Serial",NULL
|
|---|
| 218 | g_szValueCfgDeviceJrIdeIsa: db "JR-ISA",NULL
|
|---|
| 219 |
|
|---|
| 220 |
|
|---|
| 221 | ; Strings for DRVPARAMS menu
|
|---|
| 222 | g_szItemDrvBackToIde: db "Back to IDE Controller Menu",NULL
|
|---|
| 223 | g_szItemDrvBlockMode: db "Block Mode Transfers",NULL
|
|---|
| 224 | g_szItemDrvWriteCache: db "Internal Write Cache",NULL
|
|---|
| 225 | g_szItemDrvUserCHS: db "User specified CHS",NULL
|
|---|
| 226 | g_szItemDrvCyls: db "Cylinders",NULL
|
|---|
| 227 | g_szItemDrvHeads: db "Heads",NULL
|
|---|
| 228 | g_szItemDrvSect: db "Sectors per track",NULL
|
|---|
| 229 | g_szItemDrvUserLBA: db "User specified LBA",NULL
|
|---|
| 230 | g_szItemDrvLbaSectors: db "Millions of sectors",NULL
|
|---|
| 231 |
|
|---|
| 232 | g_szDlgDrvBlockMode: db "Enable Block Mode Transfers?",NULL
|
|---|
| 233 | g_szDlgDrvWriteCache: db "Select hard drive internal write cache settings.",NULL
|
|---|
| 234 | g_szDlgDrvUserCHS: db "Specify (P-)CHS parameters manually?",NULL
|
|---|
| 235 | g_szDlgDrvCyls: db "Enter number of P-CHS cylinders (1...16383).",NULL
|
|---|
| 236 | g_szDlgDrvHeads: db "Enter number of P-CHS heads (1...16).",NULL
|
|---|
| 237 | g_szDlgDrvSect: db "Enter number of sectors per track (1...63).",NULL
|
|---|
| 238 | g_szDlgDrvUserLBA: db "Limit drive capacity?",NULL
|
|---|
| 239 | g_szDlgDrvLbaSectors: db "Enter maximum capacity in millions of sectors (16...256).",NULL
|
|---|
| 240 |
|
|---|
| 241 | g_szNfoDrvBlockMode: db "Transfer multiple sectors per data request.",NULL
|
|---|
| 242 | g_szNfoDrvWriteCache: db "Hard Drive Internal Write Cache settings (WARNING!).",NULL
|
|---|
| 243 | g_szNfoDrvUserCHS: db "Specify (P-)CHS parameters manually instead of autodetecting them.",NULL
|
|---|
| 244 | g_szNfoDrvCyls: db "Number of user specified P-CHS cylinders.",NULL
|
|---|
| 245 | g_szNfoDrvHeads: db "Number of user specified P-CHS heads.",NULL
|
|---|
| 246 | g_szNfoDrvSect: db "Number of user specified P-CHS sectors per track.",NULL
|
|---|
| 247 | g_szNfoDrvUserLBA: db "Limit drive capacity to X million sectors.",NULL
|
|---|
| 248 | g_szNfoDrvLbaSectors: db "Millions of sectors (1024*1024). 1M sectors = 512 MiB.",NULL
|
|---|
| 249 |
|
|---|
| 250 | g_szHelpDrvBlockMode: incbin "Drive_BlockMode.txt"
|
|---|
| 251 | db NULL
|
|---|
| 252 | g_szHelpDrvWriteCache: incbin "Drive_WriteCache.txt"
|
|---|
| 253 | db NULL
|
|---|
| 254 | g_szHelpDrvUserCHS: incbin "Drive_UserCHS.txt"
|
|---|
| 255 | db NULL
|
|---|
| 256 | g_szHelpDrvUserLBA: incbin "Drive_UserLBA.txt"
|
|---|
| 257 | db NULL
|
|---|
| 258 |
|
|---|
| 259 | g_szMultichoiseWrCache: db "Drive Default",LF
|
|---|
| 260 | db "Disable Write Cache",LF
|
|---|
| 261 | db "Enable Write Cache",NULL
|
|---|
| 262 |
|
|---|
| 263 | g_szValueDrvWrCaDis: db "Disabled",NULL
|
|---|
| 264 | g_szValueDrvWrCaEn: db "Enabled",NULL
|
|---|
| 265 |
|
|---|
| 266 |
|
|---|
| 267 | ; Strings for boot settings menu
|
|---|
| 268 | g_szItemBootEnableMenu: db "Boot Menu",NULL
|
|---|
| 269 | g_szItemBootTimeout: db "Selection timeout",NULL
|
|---|
| 270 | g_szItemBootDrive: db "Default boot drive",NULL
|
|---|
| 271 | g_szItemBootDispMode: db "Display Mode",NULL
|
|---|
| 272 | g_szItemBootFloppyDrvs: db "Number of Floppy Drives",NULL
|
|---|
| 273 | g_szItemBootSwap: db "Swap boot drive numbers",NULL
|
|---|
| 274 | g_szItemSerialDetect: db "Scan for Serial Drives",NULL
|
|---|
| 275 |
|
|---|
| 276 | g_szDlgBootEnableMenu: db "Enable Boot Menu?",NULL
|
|---|
| 277 | g_szDlgBootTimeout: db "Enter Boot Menu selection timeout in BIOS timer ticks (2...1092).",NULL
|
|---|
| 278 | g_szDlgBootDrive: db "Enter default drive number (0xh for Floppy Drives, 8xh for Hard Disks, FFh for ROM boot).",NULL
|
|---|
| 279 | g_szDlgBootDispMode: db "Select display mode for Boot Menu.",NULL
|
|---|
| 280 | g_szDlgBootFloppyDrvs: db "Select number of Floppy Drives to display on boot menu.",NULL
|
|---|
| 281 | g_szDlgBootSwap: db "Enable drive number translation?",NULL
|
|---|
| 282 | g_szDlgSerialDetect: db "Scan for serial drives?",NULL
|
|---|
| 283 |
|
|---|
| 284 | g_szNfoBootEnableMenu: db "Enable to display boot drive selection menu.",NULL
|
|---|
| 285 | g_szNfoBootTimeout: db "Menu item selection timeout in BIOS timer ticks. 1 tick = 54.9 ms.",NULL
|
|---|
| 286 | g_szNfoBootDrive: db "Default drive on boot menu.",NULL
|
|---|
| 287 | g_szNfoDispMode: db "Display Mode for Boot Menu.",NULL
|
|---|
| 288 | g_szNfoBootFloppyDrvs: db "Number of Floppy Drives to display on boot menu.",NULL
|
|---|
| 289 | g_szNfoBootSwap: db "Drive Number Translation (swap first drive with selected).",NULL
|
|---|
| 290 | g_szNfoSerialDetect: db "Scans all standard COM ports for serial drives. This can also be invoked by holding down ALT at the end of normal drive detection.",NULL
|
|---|
| 291 |
|
|---|
| 292 | g_szHelpBootTimeout: incbin "Bootmenu_Timeout.txt"
|
|---|
| 293 | db NULL
|
|---|
| 294 | g_szHelpBootDrive: incbin "Bootmenu_DefaultDrive.txt"
|
|---|
| 295 | db NULL
|
|---|
| 296 | g_szHelpBootFloppyDrvs: incbin "Bootmenu_FloppyDrives.txt"
|
|---|
| 297 | db NULL
|
|---|
| 298 | g_szHelpBootSwap: incbin "Bootmenu_SwapDrives.txt"
|
|---|
| 299 | db NULL
|
|---|
| 300 | g_szHelpSerialDetect: incbin "Bootmenu_SerialDetect.txt"
|
|---|
| 301 | db NULL
|
|---|
| 302 |
|
|---|
| 303 | g_szMultichoiceBootDispMode:
|
|---|
| 304 | db "Default",LF
|
|---|
| 305 | db "40x25 Black & White",LF
|
|---|
| 306 | db "40x25 Color",LF
|
|---|
| 307 | db "80x25 Black & White",LF
|
|---|
| 308 | db "80x25 Color",LF
|
|---|
| 309 | db "80x25 Monochrome",NULL
|
|---|
| 310 |
|
|---|
| 311 | g_szMultichoiceBootFloppyDrvs:
|
|---|
| 312 | db "Autodetect",LF
|
|---|
| 313 | db "1",LF
|
|---|
| 314 | db "2",LF
|
|---|
| 315 | db "3",LF
|
|---|
| 316 | db "4",NULL
|
|---|
| 317 |
|
|---|
| 318 | g_szValueBootDispModeDefault: db "Default",NULL
|
|---|
| 319 | g_szValueBootDispModeBW40: db "BW40",NULL
|
|---|
| 320 | g_szValueBootDispModeCO40: db "CO40",NULL
|
|---|
| 321 | g_szValueBootDispModeBW80: db "BW80",NULL
|
|---|
| 322 | g_szValueBootDispModeCO80: db "CO80",NULL
|
|---|
| 323 | g_szValueBootDispModeMono: db "Mono",NULL
|
|---|
| 324 |
|
|---|
| 325 | g_szValueBootFloppyDrvsAuto: db "Auto",NULL
|
|---|
| 326 | g_szValueBootFloppyDrvs1: db "1",NULL
|
|---|
| 327 | g_szValueBootFloppyDrvs2: db "2",NULL
|
|---|
| 328 | g_szValueBootFloppyDrvs3: db "3",NULL
|
|---|
| 329 | g_szValueBootFloppyDrvs4: db "4",NULL
|
|---|
| 330 |
|
|---|
| 331 |
|
|---|
| 332 | ; Strings for Flash menu
|
|---|
| 333 | g_szItemFlashStart: db "Start flashing",NULL
|
|---|
| 334 | g_szItemFlashEepromType:db "EEPROM type",NULL
|
|---|
| 335 | g_szItemFlashSDP: db "SDP command",NULL
|
|---|
| 336 | g_szItemFlashAddr: db "EEPROM address",NULL
|
|---|
| 337 | g_szItemFlashPageSize: db "Page size",NULL
|
|---|
| 338 | g_szItemFlashChecksum: db "Generate checksum byte",NULL
|
|---|
| 339 |
|
|---|
| 340 | g_szDlgFlashEepromType: db "Select EEPROM type.",NULL
|
|---|
| 341 | g_szDlgFlashSDP: db "Select Software Data Protection command.",NULL
|
|---|
| 342 | g_szDlgFlashAddr: db "Enter segment address where EEPROM is located.",NULL
|
|---|
| 343 | g_szDlgFlashPageSize: db "Select write page size.",NULL
|
|---|
| 344 | g_szDlgFlashChecksum: db "Generate checksum byte to the end of BIOS image?",NULL
|
|---|
| 345 |
|
|---|
| 346 | g_szNfoFlashEepromType: db "EEPROM type.",NULL
|
|---|
| 347 | g_szNfoFlashStart: db "Writes BIOS to EEPROM.",NULL
|
|---|
| 348 | g_szNfoFlashSDP: db "Software Data Protection command.",NULL
|
|---|
| 349 | g_szNfoFlashAddr: db "Address (segment) where EEPROM is located.",NULL
|
|---|
| 350 | g_szNfoFlashPageSize: db "Number of bytes to write before delay.",NULL
|
|---|
| 351 | g_szNfoFlashChecksum: db "Generate checksum byte to the end of BIOS image.",NULL
|
|---|
| 352 |
|
|---|
| 353 | g_szHelpFlashSDP: incbin "Flash_SdpCommand.txt"
|
|---|
| 354 | db NULL
|
|---|
| 355 | g_szHelpFlashPageSize: incbin "Flash_PageSize.txt"
|
|---|
| 356 | db NULL
|
|---|
| 357 | g_szHelpFlashChecksum: incbin "Flash_Checksum.txt"
|
|---|
| 358 | db NULL
|
|---|
| 359 |
|
|---|
| 360 | g_szMultichoiceEepromType:
|
|---|
| 361 | db "2816 (2 kiB)",LF
|
|---|
| 362 | db "2864 (8 kiB)",LF
|
|---|
| 363 | db "2864 mod (8 kiB)",LF
|
|---|
| 364 | db "28256 (32 kiB)",LF
|
|---|
| 365 | db "28512 (64 kiB)",NULL
|
|---|
| 366 | g_szValueFlash2816: db "2816",NULL
|
|---|
| 367 | g_szValueFlash2864: db "2864",NULL
|
|---|
| 368 | g_szValueFlash2864Mod: db "2864mod",NULL
|
|---|
| 369 | g_szValueFlash28256: db "28256",NULL
|
|---|
| 370 | g_szValueFlash28512: db "28512",NULL
|
|---|
| 371 |
|
|---|
| 372 | g_szMultichoiceSdpCommand:
|
|---|
| 373 | db "None",LF
|
|---|
| 374 | db "Enable",LF
|
|---|
| 375 | g_szValueFlashDisable: db "Disable",NULL
|
|---|
| 376 | g_szValueFlashNone: db "None",NULL
|
|---|
| 377 | g_szValueFlashEnable: db "Enable",NULL
|
|---|
| 378 |
|
|---|
| 379 | g_szMultichoicePageSize:
|
|---|
| 380 | db "1 byte",LF
|
|---|
| 381 | db "2 bytes",LF
|
|---|
| 382 | db "4 bytes",LF
|
|---|
| 383 | db "8 bytes",LF
|
|---|
| 384 | db "16 bytes",LF
|
|---|
| 385 | db "32 bytes",LF
|
|---|
| 386 | g_szValueFlash64bytes: db "64 bytes",NULL
|
|---|
| 387 | g_szValueFlash1byte: db "1 byte",NULL
|
|---|
| 388 | g_szValueFlash2bytes: db "2 bytes",NULL
|
|---|
| 389 | g_szValueFlash4bytes: db "4 bytes",NULL
|
|---|
| 390 | g_szValueFlash8bytes: db "8 bytes",NULL
|
|---|
| 391 | g_szValueFlash16bytes: db "16 bytes",NULL
|
|---|
| 392 | g_szValueFlash32bytes: db "32 bytes",NULL
|
|---|
| 393 |
|
|---|
| 394 | g_szSelectionTimeout: db DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2u s",NULL
|
|---|
| 395 |
|
|---|
| 396 | g_szDashForZero: db "- ",NULL
|
|---|
| 397 |
|
|---|
| 398 | g_szValueUnknownError: db "Error!",NULL
|
|---|
| 399 |
|
|---|
