Context Navigation

source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Strings.asm@ 449

Visit:

Last change on this file since 449 was 438, checked in by aitotat@…, 12 years ago

Changes to Configurator:

Changed Fast XTIDE to Lo-tech XT-CF

File size: 19.9 KB

Rev	Line
[57]	1	; Project name : XTIDE Universal BIOS Configurator v2
	2	; Description : All strings.
	3
[376]	4	;
[380]	5	; XTIDE Universal BIOS and Associated Tools
[376]	6	; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
	7	;
	8	; This program is free software; you can redistribute it and/or modify
	9	; it under the terms of the GNU General Public License as published by
	10	; the Free Software Foundation; either version 2 of the License, or
	11	; (at your option) any later version.
[380]	12	;
[376]	13	; This program is distributed in the hope that it will be useful,
	14	; but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
[380]	16	; GNU General Public License for more details.
[376]	17	; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
[380]	18	;
[376]	19
[57]	20	; Section containing initialized data
	21	SECTION .data
	22
	23	; Menu title
	24	g_szProgramTitle:
[280]	25	db "Configuration and Flashing program for XTIDE Universal BIOS v2.0.0.",LF,CR,NULL
[425]	26	g_szXtideUniversalBiosSignature: db "XTIDE201",NULL
[57]	27	g_szBiosIsNotLoaded: db "BIOS is not loaded!",NULL
	28	g_szEEPROM: db "EEPROM",NULL
	29	g_szSourceAndTypeSeparator: db " : ",NULL
	30	g_szUnidentified: db "Unidentified",NULL
	31	g_szUnsaved: db " ",SINGLE_LEFT_HORIZONTAL_TO_VERTICAL,
[242]	32	db "Unsaved",SINGLE_RIGHT_HORIZONTAL_TO_VERTICAL,NULL
[108]	33
[57]	34	; Item formatting
	35	g_szFormatItemWithoutValue: db "%c%s",NULL
[59]	36	g_szFormatItemNameWithValue: db "%25s%-10S",NULL
[57]	37
	38
	39	g_szNo: db "No",NULL
[108]	40	g_szMultichoiceBooleanFlag:
[57]	41	db "No",LF
[293]	42	g_szYes: db "Yes",NULL
[57]	43
[59]	44	; Exit messages
	45	g_szDlgExitToDos: db "Exit to DOS?",NULL
	46	g_szDlgSaveChanges: db "Do you want to save changes to XTIDE Universal BIOS image file?",NULL
[57]	47
[59]	48
[57]	49	; Generic dialog strings
	50	g_szNotificationDialog: db "Notification.",NULL
	51	g_szErrorDialog: db "Error!",NULL
	52	g_szGenericDialogInfo: db "Press ENTER or ESC to close dialog.",NULL
	53
[65]	54	; Flashing related strings
[109]	55	g_szFlashTitle: db "Flashing EEPROM, please wait.",NULL
[68]	56	g_szErrEepromTooSmall: db "Image is too large for selected EEPROM type!",NULL
[65]	57	g_szErrEepromPolling: db "Timeout when polling EEPROM.",LF
	58	db "EEPROM was not flashed properly!",NULL
	59	g_szErrEepromVerify: db "EEPROM did not return the same byte that was written.",LF
	60	db "EEPROM was not flashed properly!",NULL
[293]	61	g_szPCFlashSuccessful: db "EEPROM was written successfully.",LF
[65]	62	db "Press any key to reboot.",NULL
	63	g_szForeignFlash: db "EEPROM was written successfully.",NULL
[57]	64
[65]	65
[57]	66	; Strings for main menu
	67	g_szItemMainExitToDOS: db "Exit to DOS",NULL
	68	g_szItemMainLoadFile: db "Load BIOS from file",NULL
	69	g_szItemMainLoadROM: db "Load BIOS from EEPROM",NULL
	70	g_szItemMainLoadStngs: db "Load old settings from EEPROM",NULL
	71	g_szItemMainConfigure: db "Configure XTIDE Universal BIOS",NULL
	72	g_szItemMainFlash: db "Flash EEPROM",NULL
[380]	73	g_szItemMainSave: db "Save BIOS back to original file",NULL
[336]	74	g_szItemMainLicense: db "Copyright and License Information",NULL
	75	g_szItemMainHomePage: db "Web Links",NULL
[57]	76
	77	g_szDlgMainLoadROM: db "Successfully loaded XTIDE Universal BIOS from EEPROM.",NULL
	78	g_szDlgMainLoadStngs: db "Successfully loaded settings from EEPROM.",NULL
	79	g_szDlgMainLoadFile: db "Successfully loaded file for flashing.",NULL
	80	g_szDlgMainSaveFile: db "Successfully saved XTIDE Universal BIOS to file.",NULL
	81	g_szDlgMainFileTooBig: db "Selected file is too big to be loaded for flashing!",NULL
	82	g_szDlgMainLoadErr: db "Failed to load file!",NULL
	83	g_szDlgMainSaveErr: db "Failed to save file!",NULL
	84	g_szDlgFileTitle: db "Select file to be flashed.",NULL
	85	g_szDlgFileFilter: db ".",NULL
	86
	87	g_szNfoMainExitToDOS: db "Quits XTIDE Universal BIOS Configurator.",NULL
	88	g_szNfoMainLoadFile: db "Load BIOS file to be configured or flashed.",NULL
	89	g_szNfoMainLoadROM: db "Load BIOS from EEPROM to be reconfigured.",NULL
	90	g_szNfoMainLoadStngs: db "Load old XTIDE Universal BIOS settings from EEPROM.",NULL
	91	g_szNfoMainConfigure: db "Configure XTIDE Universal BIOS settings.",NULL
	92	g_szNfoMainFlash: db "Flash loaded BIOS image to EEPROM.",NULL
[371]	93	g_szNfoMainSave: db "Save BIOS changes back to original file from which it was loaded.",NULL
[380]	94	g_szNfoMainLicense: db "XTIDE Universal BIOS and XTIDECFG Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team."
	95	db " Released under GNU GPL v2, with ABSOLUTELY NO WARRANTY. Press ENTER for more details...",NULL
[336]	96	g_szNfoMainHomePage: db "Visit http://code.google.com/p/ xtideuniversalbios (home page) and http://vintage-computer.com/ vcforum (support)",NULL
[57]	97
[380]	98	g_szHelpMainLicense: incbin "Main_License.txt"
	99	db NULL
[57]	100
	101	; Strings for XTIDE Universal BIOS configuration menu
	102	g_szItemCfgBackToMain: db "Back to Main Menu",NULL
	103	g_szItemCfgIde1: db "Primary IDE Controller",NULL
	104	g_szItemCfgIde2: db "Secondary IDE Controller",NULL
	105	g_szItemCfgIde3: db "Tertiary IDE Controller",NULL
	106	g_szItemCfgIde4: db "Quaternary IDE Controller",NULL
[290]	107	g_szItemCfgBootMenu: db "Boot settings",NULL
[57]	108	g_szItemCfgFullMode: db "Full operating mode",NULL
	109	g_szItemCfgStealSize: db "kiB to steal from RAM",NULL
[59]	110	g_szItemCfgIdeCnt: db "IDE controllers",NULL
[380]	111	g_szItemCfgIdleTimeout: db "Power Management",NULL
[57]	112
	113	g_szDlgCfgFullMode: db "Enable full operating mode?",NULL
	114	g_szDlgCfgStealSize: db "How many kiB of base memory to steal for XTIDE Universal BIOS variables (1...255)?",NULL
[153]	115	g_szDlgCfgIdeCnt: db "How many IDE controllers to manage (1...4)?",NULL
[380]	116	g_szDlgCfgIdleTimeout: db "Select the amount of time before idling drives should enter standby mode.",NULL
[57]	117
	118	g_szNfoCfgIde: db "IDE controller and drive configuration.",NULL
[290]	119	g_szNfoCfgBootMenu: db "Boot configuration.",NULL
[57]	120	g_szNfoCfgFullMode: db "Full mode supports multiple controllers and has more features.",NULL
[59]	121	g_szNfoCfgStealSize: db "How many kiB's to steal from Conventional memory for XTIDE Universal BIOS variables.",NULL
[57]	122	g_szNfoCfgIdeCnt: db "Number of IDE controllers to manage.",NULL
[380]	123	g_szNfoCfgIdleTimeout: db "Enable Power Management to set the harddrive(s) to spin down after idling a certain amount of time.",NULL
[57]	124
[380]	125	g_szSerialMoved: db "A Serial Controller has been moved to the end of the Controller list."
	126	db " No further action is required. Serial Controllers must be placed at the end of the list.",NULL
[258]	127
[68]	128	g_szHelpCfgFullMode: incbin "Configuration_FullMode.txt"
	129	db NULL
	130	g_szHelpCfgStealSize: incbin "Configuration_StealSize.txt"
	131	db NULL
[380]	132	g_szHelpCfgIdleTimeout: db "This option enables the standby timer for all harddrives handled by XTIDE Universal BIOS,"
	133	db " allowing the drives to spin down after idling the selected amount of time."
	134	db " Note that this does not work with old drives that lack the Power Management feature set."
	135	db " Also note that timeouts less than 5 minutes may cause unnecessary wear on the drives and is not recommended"
	136	db " (use for compatibility testing only).",NULL
	137	g_szMultichoiceIdleTimeout:
	138	db "Disabled",LF
	139	db "1 m",LF
	140	db "2 m",LF
	141	db "3 m",LF
	142	db "4 m",LF
	143	db "5 m",LF
	144	db "6 m",LF
	145	db "7 m",LF
	146	db "8 m",LF
	147	db "9 m",LF
	148	db "10 m",LF
	149	db "11 m",LF
	150	db "12 m",LF
	151	db "13 m",LF
	152	db "14 m",LF
	153	db "15 m",LF
	154	db "16 m",LF
	155	db "17 m",LF
	156	db "18 m",LF
	157	db "19 m",LF
	158	db "20 m",LF
	159	db "30 m",LF
	160	db "1 h",LF
	161	db "1 h 30 m",LF
	162	g_szIdleTimeoutChoice24: db "2 h",NULL
[57]	163
[380]	164	g_szIdleTimeoutChoice0: db "Disabled",NULL
	165	g_szIdleTimeoutChoice1: db "1 m",NULL
	166	g_szIdleTimeoutChoice2: db "2 m",NULL
	167	g_szIdleTimeoutChoice3: db "3 m",NULL
	168	g_szIdleTimeoutChoice4: db "4 m",NULL
	169	g_szIdleTimeoutChoice5: db "5 m",NULL
	170	g_szIdleTimeoutChoice6: db "6 m",NULL
	171	g_szIdleTimeoutChoice7: db "7 m",NULL
	172	g_szIdleTimeoutChoice8: db "8 m",NULL
	173	g_szIdleTimeoutChoice9: db "9 m",NULL
	174	g_szIdleTimeoutChoice10: db "10 m",NULL
	175	g_szIdleTimeoutChoice11: db "11 m",NULL
	176	g_szIdleTimeoutChoice12: db "12 m",NULL
	177	g_szIdleTimeoutChoice13: db "13 m",NULL
	178	g_szIdleTimeoutChoice14: db "14 m",NULL
	179	g_szIdleTimeoutChoice15: db "15 m",NULL
	180	g_szIdleTimeoutChoice16: db "16 m",NULL
	181	g_szIdleTimeoutChoice17: db "17 m",NULL
	182	g_szIdleTimeoutChoice18: db "18 m",NULL
	183	g_szIdleTimeoutChoice19: db "19 m",NULL
	184	g_szIdleTimeoutChoice20: db "20 m",NULL
	185	g_szIdleTimeoutChoice21: db "30 m",NULL
	186	g_szIdleTimeoutChoice22: db "1 h",NULL
	187	g_szIdleTimeoutChoice23: db "1 h 30 m",NULL
	188
[57]	189	; Strings for IDE Controller menu
	190	g_szItemBackToCfgMenu: db "Back to Configuration Menu",NULL
	191	g_szItemIdeMaster: db "Master Drive",NULL
	192	g_szItemIdeSlave: db "Slave Drive",NULL
[153]	193	g_szItemIdeDevice: db "Device type",NULL
[57]	194	g_szItemIdeCmdPort: db "Base (cmd block) address",NULL
	195	g_szItemIdeCtrlPort: db "Control block address",NULL
	196	g_szItemIdeEnIRQ: db "Enable interrupt",NULL
	197	g_szItemIdeIRQ: db "IRQ",NULL
[199]	198	g_szItemSerialCOM: db "COM Port",NULL
	199	g_szItemSerialBaud: db "Baud Rate",NULL
	200	g_szItemSerialPort: db "COM Port I/O address",NULL
[57]	201
[380]	202	g_szItemIdeSerialComPort: db "COM port",NULL
	203	g_szItemIdeSerialBaudRate: db "Baud rate",NULL
[199]	204
[153]	205	g_szDlgDevice: db "Select controller type.",NULL
[57]	206	g_szDlgIdeCmdPort: db "Enter IDE command block (base port) address.",NULL
	207	g_szDlgIdeCtrlPort: db "Enter IDE control block address (usually command block + 200h).",NULL
	208	g_szDlgIdeEnIRQ: db "Enable interrupt?",NULL
	209	g_szDlgIdeIRQ: db "Enter IRQ channel (2...7 for 8-bit controllers, 2...15 for any other controller).",NULL
[242]	210
[57]	211	g_szNfoIdeBackToCfgMenu:db "Back to XTIDE Universal BIOS Configuration Menu.",NULL
	212	g_szNfoIdeMaster: db "Settings for Master Drive.",NULL
	213	g_szNfoIdeSlave: db "Settings for Slave Drive.",NULL
[153]	214	g_szNfoIdeDevice: db "Select controller device type.",NULL
[57]	215	g_szNfoIdeCmdPort: db "IDE Controller Command Block (base port) address.",NULL
[199]	216	g_szNfoIdeCtrlPort: db "IDE Controller Control Block address. Usually Cmd Block + 8 for XTIDE, and Cmd Block + 200h for ATA.",NULL
[57]	217	g_szNfoIdeEnIRQ: db "Interrupt or polling mode.",NULL
	218	g_szNfoIdeIRQ: db "IRQ channel to use.",NULL
[199]	219	g_szNfoIdeSerialCOM: db "Select a COM port by number.",NULL
[380]	220	g_szNfoIdeSerialBaud: db "Select the COM port's Baud Rate. The server must match this speed."
	221	db " Note that UART clock multipliers may impact the actual speed.",NULL
[242]	222	g_szNfoIdeSerialPort: db "Select a COM port by custom I/O port address. Any address is valid up to 3f8h, but must be on an 8-byte boundary.",NULL
[57]	223
[68]	224	g_szHelpIdeCmdPort: incbin "IDE_CommandPort.txt"
	225	db NULL
	226	g_szHelpIdeCtrlPort: incbin "IDE_ControlPort.txt"
	227	db NULL
	228	g_szHelpIdeEnIRQ: incbin "IDE_EnableInterrupt.txt"
	229	db NULL
	230	g_szHelpIdeIRQ: incbin "IDE_IRQ.txt"
	231	db NULL
[199]	232	g_szHelpIdeSerialCOM: incbin "IDE_SerialCOM.txt"
	233	db NULL
	234	g_szHelpIdeSerialPort: incbin "IDE_SerialPort.txt"
	235	db NULL
	236	g_szHelpIdeSerialBaud: incbin "IDE_SerialBaud.txt"
	237	db NULL
[57]	238
[153]	239	g_szMultichoiceCfgDevice:
[403]	240	db "JR-IDE/ISA",LF
[438]	241	db "Lo-tech XT-CF",LF
[403]	242	db "XTIDE rev 2 or modded rev 1",LF
[362]	243	db "XTIDE rev 1",LF
	244	db "16-bit ISA/VLB/PCI IDE",LF
	245	db "32-bit VLB/PCI IDE",LF
[403]	246	db "Serial port virtual device",NULL
[57]	247
[403]	248
[199]	249	g_szSerialCOMChoice:
[233]	250	db "COM1 - address 3f8h",LF
	251	db "COM2 - address 2f8h",LF
	252	db "COM3 - address 3e8h",LF
	253	db "COM4 - address 2e8h",LF
	254	db "COM5 - address 2f0h",LF
	255	db "COM6 - address 3e0h",LF
	256	db "COM7 - address 2e0h",LF
	257	db "COM8 - address 260h",LF
	258	db "COM9 - address 368h",LF
	259	db "COMA - address 268h",LF
	260	db "COMB - address 360h",LF
	261	db "COMC - address 270h",LF
	262	db "COMx - Custom address",NULL
[199]	263
	264	g_szValueCfgCOM1: db "COM1",NULL
	265	g_szValueCfgCOM2: db "COM2",NULL
	266	g_szValueCfgCOM3: db "COM3",NULL
	267	g_szValueCfgCOM4: db "COM4",NULL
	268	g_szValueCfgCOM5: db "COM5",NULL
	269	g_szValueCfgCOM6: db "COM6",NULL
	270	g_szValueCfgCOM7: db "COM7",NULL
	271	g_szValueCfgCOM8: db "COM8",NULL
	272	g_szValueCfgCOM9: db "COM9",NULL
	273	g_szValueCfgCOMA: db "COMA",NULL
	274	g_szValueCfgCOMB: db "COMB",NULL
	275	g_szValueCfgCOMC: db "COMC",NULL
	276	g_szValueCfgCOMx: db "Custom",NULL
[242]	277
[199]	278	g_szSerialBaudChoice:
[233]	279	db "115.2K baud",LF
	280	db "57.6K baud",LF
	281	db "38.4K baud",LF
	282	db "28.8K baud",LF
	283	db "19.2K baud",LF
[199]	284	db "9600 baud",LF
[242]	285	db "4800 baud",LF
[233]	286	db "2400 baud",NULL
[199]	287
[233]	288	g_szValueCfgBaud115_2: db "115.2K",NULL
	289	g_szValueCfgBaud57_6: db "57.6K",NULL
	290	g_szValueCfgBaud38_4: db "38.4K",NULL
	291	g_szValueCfgBaud28_8: db "28.8K",NULL
	292	g_szValueCfgBaud19_2: db "19.2K",NULL
	293	g_szValueCfgBaud9600: db "9600",NULL
[242]	294	g_szValueCfgBaud4800: db "4800",NULL
[199]	295	g_szValueCfgBaud2400: db "2400",NULL
[233]	296
[242]	297
[403]	298	g_szValueCfgDeviceJrIdeIsa: db "JR-ISA",NULL
[438]	299	g_szValueCfgDeviceFast: db "XT-CF",NULL
[403]	300	g_szValueCfgDeviceRev2: db "XTIDE r2",NULL
[362]	301	g_szValueCfgDeviceRev1: db "XTIDE r1",NULL
[153]	302	g_szValueCfgDevice16b: db "16-bit",NULL
	303	g_szValueCfgDevice32b: db "32-bit",NULL
[199]	304	g_szValueCfgDeviceSerial: db "Serial",NULL
[57]	305
	306
[403]	307
[57]	308	; Strings for DRVPARAMS menu
	309	g_szItemDrvBackToIde: db "Back to IDE Controller Menu",NULL
	310	g_szItemDrvBlockMode: db "Block Mode Transfers",NULL
[425]	311	g_szItemDrvXlateMode: db "CHS translation method",NULL
[286]	312	g_szItemDrvWriteCache: db "Internal Write Cache",NULL
[57]	313	g_szItemDrvUserCHS: db "User specified CHS",NULL
	314	g_szItemDrvCyls: db "Cylinders",NULL
	315	g_szItemDrvHeads: db "Heads",NULL
	316	g_szItemDrvSect: db "Sectors per track",NULL
[286]	317	g_szItemDrvUserLBA: db "User specified LBA",NULL
	318	g_szItemDrvLbaSectors: db "Millions of sectors",NULL
[57]	319
	320	g_szDlgDrvBlockMode: db "Enable Block Mode Transfers?",NULL
[425]	321	g_szDlgDrvXlateMode: db "Select P-CHS to L-CHS translation method.",NULL
[286]	322	g_szDlgDrvWriteCache: db "Select hard drive internal write cache settings.",NULL
[57]	323	g_szDlgDrvUserCHS: db "Specify (P-)CHS parameters manually?",NULL
	324	g_szDlgDrvCyls: db "Enter number of P-CHS cylinders (1...16383).",NULL
	325	g_szDlgDrvHeads: db "Enter number of P-CHS heads (1...16).",NULL
	326	g_szDlgDrvSect: db "Enter number of sectors per track (1...63).",NULL
[286]	327	g_szDlgDrvUserLBA: db "Limit drive capacity?",NULL
[425]	328	g_szDlgDrvLbaSectors: db "Enter maximum capacity in millions of sectors (16...256).",NULL
[57]	329
	330	g_szNfoDrvBlockMode: db "Transfer multiple sectors per data request.",NULL
[425]	331	g_szNfoDrvXlateMode: db "P-CHS to L-CHS translation method.",NULL
[286]	332	g_szNfoDrvWriteCache: db "Hard Drive Internal Write Cache settings (WARNING!).",NULL
[59]	333	g_szNfoDrvUserCHS: db "Specify (P-)CHS parameters manually instead of autodetecting them.",NULL
[57]	334	g_szNfoDrvCyls: db "Number of user specified P-CHS cylinders.",NULL
	335	g_szNfoDrvHeads: db "Number of user specified P-CHS heads.",NULL
	336	g_szNfoDrvSect: db "Number of user specified P-CHS sectors per track.",NULL
[286]	337	g_szNfoDrvUserLBA: db "Limit drive capacity to X million sectors.",NULL
	338	g_szNfoDrvLbaSectors: db "Millions of sectors (1024*1024). 1M sectors = 512 MiB.",NULL
[57]	339
[68]	340	g_szHelpDrvBlockMode: incbin "Drive_BlockMode.txt"
	341	db NULL
[286]	342	g_szHelpDrvWriteCache: incbin "Drive_WriteCache.txt"
	343	db NULL
[68]	344	g_szHelpDrvUserCHS: incbin "Drive_UserCHS.txt"
	345	db NULL
[286]	346	g_szHelpDrvUserLBA: incbin "Drive_UserLBA.txt"
	347	db NULL
[380]	348
[425]	349	g_szMultichoiseXlateMode:
	350	db "NORMAL",LF
	351	db "LARGE",LF
	352	db "Assisted LBA",LF
	353	db "Autodetect",NULL
	354
	355	g_szValueDrvXlateNormal:db "NORMAL",NULL
	356	g_szValueDrvXlateLarge: db "LARGE",NULL
	357	g_szValueDrvXlateLBA: db "LBA",NULL
	358	g_szValueDrvXlateAuto: db "Auto",NULL
	359
[286]	360	g_szMultichoiseWrCache: db "Drive Default",LF
	361	db "Disable Write Cache",LF
	362	db "Enable Write Cache",NULL
[57]	363
[286]	364	g_szValueDrvWrCaDis: db "Disabled",NULL
	365	g_szValueDrvWrCaEn: db "Enabled",NULL
[57]	366
[286]	367
[290]	368	; Strings for boot settings menu
[57]	369	g_szItemBootTimeout: db "Selection timeout",NULL
	370	g_szItemBootDrive: db "Default boot drive",NULL
[144]	371	g_szItemBootDispMode: db "Display Mode",NULL
[59]	372	g_szItemBootFloppyDrvs: db "Number of Floppy Drives",NULL
[199]	373	g_szItemSerialDetect: db "Scan for Serial Drives",NULL
[57]	374
[290]	375	g_szDlgBootTimeout: db "Enter Boot Menu selection timeout in BIOS timer ticks (2...1092).",NULL
[403]	376	g_szDlgBootDrive: db "Enter default drive number (0xh for Floppy Drives, 8xh for Hard Disks).",NULL
	377	g_szDlgBootDispMode: db "Select display mode.",NULL
	378	g_szDlgBootFloppyDrvs: db "Select number of Floppy Drives in system.",NULL
[199]	379	g_szDlgSerialDetect: db "Scan for serial drives?",NULL
[242]	380
[290]	381	g_szNfoBootTimeout: db "Menu item selection timeout in BIOS timer ticks. 1 tick = 54.9 ms.",NULL
[57]	382	g_szNfoBootDrive: db "Default drive on boot menu.",NULL
[403]	383	g_szNfoDispMode: db "Display mode to set when booting.",NULL
	384	g_szNfoBootFloppyDrvs: db "Number of Floppy Drives in system.",NULL
[380]	385	g_szNfoSerialDetect: db "Scans all standard COM ports for serial drives."
	386	db " This can also be invoked by holding down ALT at the end of normal drive detection.",NULL
[57]	387
[68]	388	g_szHelpBootTimeout: incbin "Bootmenu_Timeout.txt"
	389	db NULL
	390	g_szHelpBootDrive: incbin "Bootmenu_DefaultDrive.txt"
	391	db NULL
	392	g_szHelpBootFloppyDrvs: incbin "Bootmenu_FloppyDrives.txt"
	393	db NULL
[199]	394	g_szHelpSerialDetect: incbin "Bootmenu_SerialDetect.txt"
	395	db NULL
[57]	396
[144]	397	g_szMultichoiceBootDispMode:
	398	db "Default",LF
	399	db "40x25 Black & White",LF
	400	db "40x25 Color",LF
	401	db "80x25 Black & White",LF
	402	db "80x25 Color",LF
	403	db "80x25 Monochrome",NULL
	404
[108]	405	g_szMultichoiceBootFloppyDrvs:
[59]	406	db "Autodetect",LF
	407	db "1",LF
	408	db "2",LF
	409	db "3",LF
	410	db "4",NULL
[57]	411
[144]	412	g_szValueBootDispModeDefault: db "Default",NULL
	413	g_szValueBootDispModeBW40: db "BW40",NULL
	414	g_szValueBootDispModeCO40: db "CO40",NULL
	415	g_szValueBootDispModeBW80: db "BW80",NULL
	416	g_szValueBootDispModeCO80: db "CO80",NULL
	417	g_szValueBootDispModeMono: db "Mono",NULL
	418
[59]	419	g_szValueBootFloppyDrvsAuto: db "Auto",NULL
	420	g_szValueBootFloppyDrvs1: db "1",NULL
	421	g_szValueBootFloppyDrvs2: db "2",NULL
	422	g_szValueBootFloppyDrvs3: db "3",NULL
	423	g_szValueBootFloppyDrvs4: db "4",NULL
	424
	425
[57]	426	; Strings for Flash menu
	427	g_szItemFlashStart: db "Start flashing",NULL
[59]	428	g_szItemFlashEepromType:db "EEPROM type",NULL
[57]	429	g_szItemFlashSDP: db "SDP command",NULL
	430	g_szItemFlashAddr: db "EEPROM address",NULL
	431	g_szItemFlashPageSize: db "Page size",NULL
	432	g_szItemFlashChecksum: db "Generate checksum byte",NULL
	433
[59]	434	g_szDlgFlashEepromType: db "Select EEPROM type.",NULL
	435	g_szDlgFlashSDP: db "Select Software Data Protection command.",NULL
[57]	436	g_szDlgFlashAddr: db "Enter segment address where EEPROM is located.",NULL
[59]	437	g_szDlgFlashPageSize: db "Select write page size.",NULL
[57]	438	g_szDlgFlashChecksum: db "Generate checksum byte to the end of BIOS image?",NULL
	439
[59]	440	g_szNfoFlashEepromType: db "EEPROM type.",NULL
[57]	441	g_szNfoFlashStart: db "Writes BIOS to EEPROM.",NULL
	442	g_szNfoFlashSDP: db "Software Data Protection command.",NULL
	443	g_szNfoFlashAddr: db "Address (segment) where EEPROM is located.",NULL
	444	g_szNfoFlashPageSize: db "Number of bytes to write before delay.",NULL
	445	g_szNfoFlashChecksum: db "Generate checksum byte to the end of BIOS image.",NULL
	446
[68]	447	g_szHelpFlashSDP: incbin "Flash_SdpCommand.txt"
	448	db NULL
	449	g_szHelpFlashPageSize: incbin "Flash_PageSize.txt"
	450	db NULL
	451	g_szHelpFlashChecksum: incbin "Flash_Checksum.txt"
	452	db NULL
[57]	453
[108]	454	g_szMultichoiceEepromType:
[59]	455	db "2816 (2 kiB)",LF
	456	db "2864 (8 kiB)",LF
[159]	457	db "2864 mod (8 kiB)",LF
[59]	458	db "28256 (32 kiB)",LF
	459	db "28512 (64 kiB)",NULL
	460	g_szValueFlash2816: db "2816",NULL
	461	g_szValueFlash2864: db "2864",NULL
[159]	462	g_szValueFlash2864Mod: db "2864mod",NULL
[59]	463	g_szValueFlash28256: db "28256",NULL
	464	g_szValueFlash28512: db "28512",NULL
[57]	465
[108]	466	g_szMultichoiceSdpCommand:
[59]	467	db "None",LF
	468	db "Enable",LF
[293]	469	g_szValueFlashDisable: db "Disable",NULL
[59]	470	g_szValueFlashNone: db "None",NULL
	471	g_szValueFlashEnable: db "Enable",NULL
[57]	472
[108]	473	g_szMultichoicePageSize:
[59]	474	db "1 byte",LF
	475	db "2 bytes",LF
	476	db "4 bytes",LF
	477	db "8 bytes",LF
	478	db "16 bytes",LF
	479	db "32 bytes",LF
[293]	480	g_szValueFlash64bytes: db "64 bytes",NULL
[65]	481	g_szValueFlash1byte: db "1 byte",NULL
[59]	482	g_szValueFlash2bytes: db "2 bytes",NULL
	483	g_szValueFlash4bytes: db "4 bytes",NULL
	484	g_szValueFlash8bytes: db "8 bytes",NULL
	485	g_szValueFlash16bytes: db "16 bytes",NULL
	486	g_szValueFlash32bytes: db "32 bytes",NULL
[185]	487
[380]	488	g_szSelectionTimeout: db DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2u s",NULL
[185]	489
[380]	490	g_szDashForZero: db "- ",NULL
[233]	491
	492	g_szValueUnknownError: db "Error!",NULL
	493

Note: See TracBrowser for help on using the repository browser.

Download in other formats: