Context Navigation

Strings.asm@ 375

Visit:

Last change on this file since 375 was 371, checked in by gregli@…, 12 years ago

Small changes. 1) Changes biosdrvs.com to output CR+LF instead of LF+CR, consistent with DOS/Windows, but I did not update the Assembly Library as this would break the Configurator; 2) Put a C/C++ section in Version.inc for the serial server; 3) Configurator defaults the EEPROM address after scanning for a EEPROM in memory (as it does for loading the BIOS from ROM); 4) Added a command to the Configurator main menu to save chages to the file from which it was loaded (if it was loaded form a file), which is symmetric with the Load command and more discoverable than exiting DOS and then being prompted (which is still there too, if changes are unsaved).

File size: 17.0 KB

Rev	Line
[57]	1	; Project name : XTIDE Universal BIOS Configurator v2
	2	; Description : All strings.
	3
	4	; Section containing initialized data
	5	SECTION .data
	6
	7	; Menu title
	8	g_szProgramTitle:
[280]	9	db "Configuration and Flashing program for XTIDE Universal BIOS v2.0.0.",LF,CR,NULL
[282]	10	g_szXtideUniversalBiosSignature: db "XTIDE200",NULL
[57]	11	g_szBiosIsNotLoaded: db "BIOS is not loaded!",NULL
	12	g_szEEPROM: db "EEPROM",NULL
	13	g_szSourceAndTypeSeparator: db " : ",NULL
	14	g_szUnidentified: db "Unidentified",NULL
	15	g_szUnsaved: db " ",SINGLE_LEFT_HORIZONTAL_TO_VERTICAL,
[242]	16	db "Unsaved",SINGLE_RIGHT_HORIZONTAL_TO_VERTICAL,NULL
[108]	17
[57]	18	; Item formatting
	19	g_szFormatItemWithoutValue: db "%c%s",NULL
[59]	20	g_szFormatItemNameWithValue: db "%25s%-10S",NULL
[57]	21
	22
	23	g_szNo: db "No",NULL
[108]	24	g_szMultichoiceBooleanFlag:
[57]	25	db "No",LF
[293]	26	g_szYes: db "Yes",NULL
[57]	27
[59]	28	; Exit messages
	29	g_szDlgExitToDos: db "Exit to DOS?",NULL
	30	g_szDlgSaveChanges: db "Do you want to save changes to XTIDE Universal BIOS image file?",NULL
[57]	31
[59]	32
[57]	33	; Generic dialog strings
	34	g_szNotificationDialog: db "Notification.",NULL
	35	g_szErrorDialog: db "Error!",NULL
	36	g_szGenericDialogInfo: db "Press ENTER or ESC to close dialog.",NULL
	37
[65]	38	; Flashing related strings
[109]	39	g_szFlashTitle: db "Flashing EEPROM, please wait.",NULL
[68]	40	g_szErrEepromTooSmall: db "Image is too large for selected EEPROM type!",NULL
[65]	41	g_szErrEepromPolling: db "Timeout when polling EEPROM.",LF
	42	db "EEPROM was not flashed properly!",NULL
	43	g_szErrEepromVerify: db "EEPROM did not return the same byte that was written.",LF
	44	db "EEPROM was not flashed properly!",NULL
[293]	45	g_szPCFlashSuccessful: db "EEPROM was written successfully.",LF
[65]	46	db "Press any key to reboot.",NULL
	47	g_szForeignFlash: db "EEPROM was written successfully.",NULL
[57]	48
[65]	49
[57]	50	; Strings for main menu
	51	g_szItemMainExitToDOS: db "Exit to DOS",NULL
	52	g_szItemMainLoadFile: db "Load BIOS from file",NULL
	53	g_szItemMainLoadROM: db "Load BIOS from EEPROM",NULL
	54	g_szItemMainLoadStngs: db "Load old settings from EEPROM",NULL
	55	g_szItemMainConfigure: db "Configure XTIDE Universal BIOS",NULL
	56	g_szItemMainFlash: db "Flash EEPROM",NULL
[371]	57	g_szItemMainSave: db "Save BIOS back to original file",NULL
[336]	58	g_szItemMainLicense: db "Copyright and License Information",NULL
	59	g_szItemMainHomePage: db "Web Links",NULL
[57]	60
	61	g_szDlgMainLoadROM: db "Successfully loaded XTIDE Universal BIOS from EEPROM.",NULL
	62	g_szDlgMainLoadStngs: db "Successfully loaded settings from EEPROM.",NULL
	63	g_szDlgMainLoadFile: db "Successfully loaded file for flashing.",NULL
	64	g_szDlgMainSaveFile: db "Successfully saved XTIDE Universal BIOS to file.",NULL
	65	g_szDlgMainFileTooBig: db "Selected file is too big to be loaded for flashing!",NULL
	66	g_szDlgMainLoadErr: db "Failed to load file!",NULL
	67	g_szDlgMainSaveErr: db "Failed to save file!",NULL
	68	g_szDlgFileTitle: db "Select file to be flashed.",NULL
	69	g_szDlgFileFilter: db ".",NULL
	70
	71	g_szNfoMainExitToDOS: db "Quits XTIDE Universal BIOS Configurator.",NULL
	72	g_szNfoMainLoadFile: db "Load BIOS file to be configured or flashed.",NULL
	73	g_szNfoMainLoadROM: db "Load BIOS from EEPROM to be reconfigured.",NULL
	74	g_szNfoMainLoadStngs: db "Load old XTIDE Universal BIOS settings from EEPROM.",NULL
	75	g_szNfoMainConfigure: db "Configure XTIDE Universal BIOS settings.",NULL
	76	g_szNfoMainFlash: db "Flash loaded BIOS image to EEPROM.",NULL
[371]	77	g_szNfoMainSave: db "Save BIOS changes back to original file from which it was loaded.",NULL
[369]	78	g_szNfoMainLicense: db "XTIDE Universal BIOS and XTIDECFG Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team. Released under GNU GPL v2, with ABSOLUTELY NO WARRANTY. Press ENTER for more details...",NULL
[336]	79	g_szNfoMainHomePage: db "Visit http://code.google.com/p/ xtideuniversalbios (home page) and http://vintage-computer.com/ vcforum (support)",NULL
[57]	80
[336]	81	g_szHelpMainLicense: incbin "Main_License.txt"
	82	db NULL
[57]	83
	84	; Strings for XTIDE Universal BIOS configuration menu
	85	g_szItemCfgBackToMain: db "Back to Main Menu",NULL
	86	g_szItemCfgIde1: db "Primary IDE Controller",NULL
	87	g_szItemCfgIde2: db "Secondary IDE Controller",NULL
	88	g_szItemCfgIde3: db "Tertiary IDE Controller",NULL
	89	g_szItemCfgIde4: db "Quaternary IDE Controller",NULL
[290]	90	g_szItemCfgBootMenu: db "Boot settings",NULL
[57]	91	g_szItemCfgFullMode: db "Full operating mode",NULL
	92	g_szItemCfgStealSize: db "kiB to steal from RAM",NULL
[59]	93	g_szItemCfgIdeCnt: db "IDE controllers",NULL
[57]	94
	95	g_szDlgCfgFullMode: db "Enable full operating mode?",NULL
	96	g_szDlgCfgStealSize: db "How many kiB of base memory to steal for XTIDE Universal BIOS variables (1...255)?",NULL
[153]	97	g_szDlgCfgIdeCnt: db "How many IDE controllers to manage (1...4)?",NULL
[57]	98
	99	g_szNfoCfgIde: db "IDE controller and drive configuration.",NULL
[290]	100	g_szNfoCfgBootMenu: db "Boot configuration.",NULL
[57]	101	g_szNfoCfgFullMode: db "Full mode supports multiple controllers and has more features.",NULL
[59]	102	g_szNfoCfgStealSize: db "How many kiB's to steal from Conventional memory for XTIDE Universal BIOS variables.",NULL
[57]	103	g_szNfoCfgIdeCnt: db "Number of IDE controllers to manage.",NULL
	104
[258]	105	g_szSerialMoved: db "A Serial Controller has been moved to the end of the Controller list. No further action is required. Serial Controllers must be placed at the end of the list.",NULL
	106
[68]	107	g_szHelpCfgFullMode: incbin "Configuration_FullMode.txt"
	108	db NULL
	109	g_szHelpCfgStealSize: incbin "Configuration_StealSize.txt"
	110	db NULL
[57]	111
	112	; Strings for IDE Controller menu
	113	g_szItemBackToCfgMenu: db "Back to Configuration Menu",NULL
	114	g_szItemIdeMaster: db "Master Drive",NULL
	115	g_szItemIdeSlave: db "Slave Drive",NULL
[153]	116	g_szItemIdeDevice: db "Device type",NULL
[57]	117	g_szItemIdeCmdPort: db "Base (cmd block) address",NULL
	118	g_szItemIdeCtrlPort: db "Control block address",NULL
	119	g_szItemIdeEnIRQ: db "Enable interrupt",NULL
	120	g_szItemIdeIRQ: db "IRQ",NULL
[199]	121	g_szItemSerialCOM: db "COM Port",NULL
	122	g_szItemSerialBaud: db "Baud Rate",NULL
	123	g_szItemSerialPort: db "COM Port I/O address",NULL
[57]	124
[199]	125	g_szItemIdeSerialComPort: db "COM port",NULL
	126	g_szItemIdeSerialBaudRate: db "Baud rate",NULL
	127
[153]	128	g_szDlgDevice: db "Select controller type.",NULL
[57]	129	g_szDlgIdeCmdPort: db "Enter IDE command block (base port) address.",NULL
	130	g_szDlgIdeCtrlPort: db "Enter IDE control block address (usually command block + 200h).",NULL
	131	g_szDlgIdeEnIRQ: db "Enable interrupt?",NULL
	132	g_szDlgIdeIRQ: db "Enter IRQ channel (2...7 for 8-bit controllers, 2...15 for any other controller).",NULL
[242]	133
[57]	134	g_szNfoIdeBackToCfgMenu:db "Back to XTIDE Universal BIOS Configuration Menu.",NULL
	135	g_szNfoIdeMaster: db "Settings for Master Drive.",NULL
	136	g_szNfoIdeSlave: db "Settings for Slave Drive.",NULL
[153]	137	g_szNfoIdeDevice: db "Select controller device type.",NULL
[57]	138	g_szNfoIdeCmdPort: db "IDE Controller Command Block (base port) address.",NULL
[199]	139	g_szNfoIdeCtrlPort: db "IDE Controller Control Block address. Usually Cmd Block + 8 for XTIDE, and Cmd Block + 200h for ATA.",NULL
[57]	140	g_szNfoIdeEnIRQ: db "Interrupt or polling mode.",NULL
	141	g_szNfoIdeIRQ: db "IRQ channel to use.",NULL
[199]	142	g_szNfoIdeSerialCOM: db "Select a COM port by number.",NULL
[203]	143	g_szNfoIdeSerialBaud: db "Select the COM port's Baud Rate. The server must match this speed. Note that UART clock multipliers may impact the actual speed.",NULL
[242]	144	g_szNfoIdeSerialPort: db "Select a COM port by custom I/O port address. Any address is valid up to 3f8h, but must be on an 8-byte boundary.",NULL
[57]	145
[68]	146	g_szHelpIdeCmdPort: incbin "IDE_CommandPort.txt"
	147	db NULL
	148	g_szHelpIdeCtrlPort: incbin "IDE_ControlPort.txt"
	149	db NULL
	150	g_szHelpIdeEnIRQ: incbin "IDE_EnableInterrupt.txt"
	151	db NULL
	152	g_szHelpIdeIRQ: incbin "IDE_IRQ.txt"
	153	db NULL
[199]	154	g_szHelpIdeSerialCOM: incbin "IDE_SerialCOM.txt"
	155	db NULL
	156	g_szHelpIdeSerialPort: incbin "IDE_SerialPort.txt"
	157	db NULL
	158	g_szHelpIdeSerialBaud: incbin "IDE_SerialBaud.txt"
	159	db NULL
[57]	160
[153]	161	g_szMultichoiceCfgDevice:
[362]	162	db "XTIDE rev 1",LF
	163	db "XTIDE rev 2 or modded rev 1",LF
	164	db "Fast XTIDE (CPLD v2 project)",LF
	165	db "16-bit ISA/VLB/PCI IDE",LF
	166	db "32-bit VLB/PCI IDE",LF
[286]	167	db "Serial port virtual device",LF
	168	db "JR-IDE/ISA",NULL
[57]	169
[199]	170	g_szSerialCOMChoice:
[233]	171	db "COM1 - address 3f8h",LF
	172	db "COM2 - address 2f8h",LF
	173	db "COM3 - address 3e8h",LF
	174	db "COM4 - address 2e8h",LF
	175	db "COM5 - address 2f0h",LF
	176	db "COM6 - address 3e0h",LF
	177	db "COM7 - address 2e0h",LF
	178	db "COM8 - address 260h",LF
	179	db "COM9 - address 368h",LF
	180	db "COMA - address 268h",LF
	181	db "COMB - address 360h",LF
	182	db "COMC - address 270h",LF
	183	db "COMx - Custom address",NULL
[199]	184
	185	g_szValueCfgCOM1: db "COM1",NULL
	186	g_szValueCfgCOM2: db "COM2",NULL
	187	g_szValueCfgCOM3: db "COM3",NULL
	188	g_szValueCfgCOM4: db "COM4",NULL
	189	g_szValueCfgCOM5: db "COM5",NULL
	190	g_szValueCfgCOM6: db "COM6",NULL
	191	g_szValueCfgCOM7: db "COM7",NULL
	192	g_szValueCfgCOM8: db "COM8",NULL
	193	g_szValueCfgCOM9: db "COM9",NULL
	194	g_szValueCfgCOMA: db "COMA",NULL
	195	g_szValueCfgCOMB: db "COMB",NULL
	196	g_szValueCfgCOMC: db "COMC",NULL
	197	g_szValueCfgCOMx: db "Custom",NULL
[242]	198
[199]	199	g_szSerialBaudChoice:
[233]	200	db "115.2K baud",LF
	201	db "57.6K baud",LF
	202	db "38.4K baud",LF
	203	db "28.8K baud",LF
	204	db "19.2K baud",LF
[199]	205	db "9600 baud",LF
[242]	206	db "4800 baud",LF
[233]	207	db "2400 baud",NULL
[199]	208
[233]	209	g_szValueCfgBaud115_2: db "115.2K",NULL
	210	g_szValueCfgBaud57_6: db "57.6K",NULL
	211	g_szValueCfgBaud38_4: db "38.4K",NULL
	212	g_szValueCfgBaud28_8: db "28.8K",NULL
	213	g_szValueCfgBaud19_2: db "19.2K",NULL
	214	g_szValueCfgBaud9600: db "9600",NULL
[242]	215	g_szValueCfgBaud4800: db "4800",NULL
[199]	216	g_szValueCfgBaud2400: db "2400",NULL
[233]	217
[242]	218
[362]	219	g_szValueCfgDeviceRev1: db "XTIDE r1",NULL
	220	g_szValueCfgDeviceRev2: db "XTIDE r2",NULL
	221	g_szValueCfgDeviceFast: db "Fast XT",NULL
[153]	222	g_szValueCfgDevice16b: db "16-bit",NULL
	223	g_szValueCfgDevice32b: db "32-bit",NULL
[199]	224	g_szValueCfgDeviceSerial: db "Serial",NULL
[286]	225	g_szValueCfgDeviceJrIdeIsa: db "JR-ISA",NULL
[57]	226
	227
	228	; Strings for DRVPARAMS menu
	229	g_szItemDrvBackToIde: db "Back to IDE Controller Menu",NULL
	230	g_szItemDrvBlockMode: db "Block Mode Transfers",NULL
[286]	231	g_szItemDrvWriteCache: db "Internal Write Cache",NULL
[57]	232	g_szItemDrvUserCHS: db "User specified CHS",NULL
	233	g_szItemDrvCyls: db "Cylinders",NULL
	234	g_szItemDrvHeads: db "Heads",NULL
	235	g_szItemDrvSect: db "Sectors per track",NULL
[286]	236	g_szItemDrvUserLBA: db "User specified LBA",NULL
	237	g_szItemDrvLbaSectors: db "Millions of sectors",NULL
[57]	238
	239	g_szDlgDrvBlockMode: db "Enable Block Mode Transfers?",NULL
[286]	240	g_szDlgDrvWriteCache: db "Select hard drive internal write cache settings.",NULL
[57]	241	g_szDlgDrvUserCHS: db "Specify (P-)CHS parameters manually?",NULL
	242	g_szDlgDrvCyls: db "Enter number of P-CHS cylinders (1...16383).",NULL
	243	g_szDlgDrvHeads: db "Enter number of P-CHS heads (1...16).",NULL
	244	g_szDlgDrvSect: db "Enter number of sectors per track (1...63).",NULL
[286]	245	g_szDlgDrvUserLBA: db "Limit drive capacity?",NULL
[360]	246	g_szDlgDrvLbaSectors: db "Enter maximum capacity in millions of sectors (1...256).",NULL
[57]	247
	248	g_szNfoDrvBlockMode: db "Transfer multiple sectors per data request.",NULL
[286]	249	g_szNfoDrvWriteCache: db "Hard Drive Internal Write Cache settings (WARNING!).",NULL
[59]	250	g_szNfoDrvUserCHS: db "Specify (P-)CHS parameters manually instead of autodetecting them.",NULL
[57]	251	g_szNfoDrvCyls: db "Number of user specified P-CHS cylinders.",NULL
	252	g_szNfoDrvHeads: db "Number of user specified P-CHS heads.",NULL
	253	g_szNfoDrvSect: db "Number of user specified P-CHS sectors per track.",NULL
[286]	254	g_szNfoDrvUserLBA: db "Limit drive capacity to X million sectors.",NULL
	255	g_szNfoDrvLbaSectors: db "Millions of sectors (1024*1024). 1M sectors = 512 MiB.",NULL
[57]	256
[68]	257	g_szHelpDrvBlockMode: incbin "Drive_BlockMode.txt"
	258	db NULL
[286]	259	g_szHelpDrvWriteCache: incbin "Drive_WriteCache.txt"
	260	db NULL
[68]	261	g_szHelpDrvUserCHS: incbin "Drive_UserCHS.txt"
	262	db NULL
[286]	263	g_szHelpDrvUserLBA: incbin "Drive_UserLBA.txt"
	264	db NULL
	265
	266	g_szMultichoiseWrCache: db "Drive Default",LF
	267	db "Disable Write Cache",LF
	268	db "Enable Write Cache",NULL
[57]	269
[286]	270	g_szValueDrvWrCaDis: db "Disabled",NULL
	271	g_szValueDrvWrCaEn: db "Enabled",NULL
[57]	272
[286]	273
[290]	274	; Strings for boot settings menu
	275	g_szItemBootEnableMenu: db "Boot Menu",NULL
[57]	276	g_szItemBootTimeout: db "Selection timeout",NULL
	277	g_szItemBootDrive: db "Default boot drive",NULL
[144]	278	g_szItemBootDispMode: db "Display Mode",NULL
[59]	279	g_szItemBootFloppyDrvs: db "Number of Floppy Drives",NULL
[57]	280	g_szItemBootSwap: db "Swap boot drive numbers",NULL
[199]	281	g_szItemSerialDetect: db "Scan for Serial Drives",NULL
[57]	282
[290]	283	g_szDlgBootEnableMenu: db "Enable Boot Menu?",NULL
	284	g_szDlgBootTimeout: db "Enter Boot Menu selection timeout in BIOS timer ticks (2...1092).",NULL
[57]	285	g_szDlgBootDrive: db "Enter default drive number (0xh for Floppy Drives, 8xh for Hard Disks, FFh for ROM boot).",NULL
[144]	286	g_szDlgBootDispMode: db "Select display mode for Boot Menu.",NULL
	287	g_szDlgBootFloppyDrvs: db "Select number of Floppy Drives to display on boot menu.",NULL
[57]	288	g_szDlgBootSwap: db "Enable drive number translation?",NULL
[199]	289	g_szDlgSerialDetect: db "Scan for serial drives?",NULL
[242]	290
[290]	291	g_szNfoBootEnableMenu: db "Enable to display boot drive selection menu.",NULL
	292	g_szNfoBootTimeout: db "Menu item selection timeout in BIOS timer ticks. 1 tick = 54.9 ms.",NULL
[57]	293	g_szNfoBootDrive: db "Default drive on boot menu.",NULL
[144]	294	g_szNfoDispMode: db "Display Mode for Boot Menu.",NULL
[59]	295	g_szNfoBootFloppyDrvs: db "Number of Floppy Drives to display on boot menu.",NULL
[57]	296	g_szNfoBootSwap: db "Drive Number Translation (swap first drive with selected).",NULL
[203]	297	g_szNfoSerialDetect: db "Scans all standard COM ports for serial drives. This can also be invoked by holding down ALT at the end of normal drive detection.",NULL
[57]	298
[68]	299	g_szHelpBootTimeout: incbin "Bootmenu_Timeout.txt"
	300	db NULL
	301	g_szHelpBootDrive: incbin "Bootmenu_DefaultDrive.txt"
	302	db NULL
	303	g_szHelpBootFloppyDrvs: incbin "Bootmenu_FloppyDrives.txt"
	304	db NULL
	305	g_szHelpBootSwap: incbin "Bootmenu_SwapDrives.txt"
	306	db NULL
[199]	307	g_szHelpSerialDetect: incbin "Bootmenu_SerialDetect.txt"
	308	db NULL
[57]	309
[144]	310	g_szMultichoiceBootDispMode:
	311	db "Default",LF
	312	db "40x25 Black & White",LF
	313	db "40x25 Color",LF
	314	db "80x25 Black & White",LF
	315	db "80x25 Color",LF
	316	db "80x25 Monochrome",NULL
	317
[108]	318	g_szMultichoiceBootFloppyDrvs:
[59]	319	db "Autodetect",LF
	320	db "1",LF
	321	db "2",LF
	322	db "3",LF
	323	db "4",NULL
[57]	324
[144]	325	g_szValueBootDispModeDefault: db "Default",NULL
	326	g_szValueBootDispModeBW40: db "BW40",NULL
	327	g_szValueBootDispModeCO40: db "CO40",NULL
	328	g_szValueBootDispModeBW80: db "BW80",NULL
	329	g_szValueBootDispModeCO80: db "CO80",NULL
	330	g_szValueBootDispModeMono: db "Mono",NULL
	331
[59]	332	g_szValueBootFloppyDrvsAuto: db "Auto",NULL
	333	g_szValueBootFloppyDrvs1: db "1",NULL
	334	g_szValueBootFloppyDrvs2: db "2",NULL
	335	g_szValueBootFloppyDrvs3: db "3",NULL
	336	g_szValueBootFloppyDrvs4: db "4",NULL
	337
	338
[57]	339	; Strings for Flash menu
	340	g_szItemFlashStart: db "Start flashing",NULL
[59]	341	g_szItemFlashEepromType:db "EEPROM type",NULL
[57]	342	g_szItemFlashSDP: db "SDP command",NULL
	343	g_szItemFlashAddr: db "EEPROM address",NULL
	344	g_szItemFlashPageSize: db "Page size",NULL
	345	g_szItemFlashChecksum: db "Generate checksum byte",NULL
	346
[59]	347	g_szDlgFlashEepromType: db "Select EEPROM type.",NULL
	348	g_szDlgFlashSDP: db "Select Software Data Protection command.",NULL
[57]	349	g_szDlgFlashAddr: db "Enter segment address where EEPROM is located.",NULL
[59]	350	g_szDlgFlashPageSize: db "Select write page size.",NULL
[57]	351	g_szDlgFlashChecksum: db "Generate checksum byte to the end of BIOS image?",NULL
	352
[59]	353	g_szNfoFlashEepromType: db "EEPROM type.",NULL
[57]	354	g_szNfoFlashStart: db "Writes BIOS to EEPROM.",NULL
	355	g_szNfoFlashSDP: db "Software Data Protection command.",NULL
	356	g_szNfoFlashAddr: db "Address (segment) where EEPROM is located.",NULL
	357	g_szNfoFlashPageSize: db "Number of bytes to write before delay.",NULL
	358	g_szNfoFlashChecksum: db "Generate checksum byte to the end of BIOS image.",NULL
	359
[68]	360	g_szHelpFlashSDP: incbin "Flash_SdpCommand.txt"
	361	db NULL
	362	g_szHelpFlashPageSize: incbin "Flash_PageSize.txt"
	363	db NULL
	364	g_szHelpFlashChecksum: incbin "Flash_Checksum.txt"
	365	db NULL
[57]	366
[108]	367	g_szMultichoiceEepromType:
[59]	368	db "2816 (2 kiB)",LF
	369	db "2864 (8 kiB)",LF
[159]	370	db "2864 mod (8 kiB)",LF
[59]	371	db "28256 (32 kiB)",LF
	372	db "28512 (64 kiB)",NULL
	373	g_szValueFlash2816: db "2816",NULL
	374	g_szValueFlash2864: db "2864",NULL
[159]	375	g_szValueFlash2864Mod: db "2864mod",NULL
[59]	376	g_szValueFlash28256: db "28256",NULL
	377	g_szValueFlash28512: db "28512",NULL
[57]	378
[108]	379	g_szMultichoiceSdpCommand:
[59]	380	db "None",LF
	381	db "Enable",LF
[293]	382	g_szValueFlashDisable: db "Disable",NULL
[59]	383	g_szValueFlashNone: db "None",NULL
	384	g_szValueFlashEnable: db "Enable",NULL
[57]	385
[108]	386	g_szMultichoicePageSize:
[59]	387	db "1 byte",LF
	388	db "2 bytes",LF
	389	db "4 bytes",LF
	390	db "8 bytes",LF
	391	db "16 bytes",LF
	392	db "32 bytes",LF
[293]	393	g_szValueFlash64bytes: db "64 bytes",NULL
[65]	394	g_szValueFlash1byte: db "1 byte",NULL
[59]	395	g_szValueFlash2bytes: db "2 bytes",NULL
	396	g_szValueFlash4bytes: db "4 bytes",NULL
	397	g_szValueFlash8bytes: db "8 bytes",NULL
	398	g_szValueFlash16bytes: db "16 bytes",NULL
	399	g_szValueFlash32bytes: db "32 bytes",NULL
[185]	400
	401	g_szSelectionTimeout: db DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2u s",NULL
	402
[233]	403	g_szDashForZero: db "- ",NULL
	404
	405	g_szValueUnknownError: db "Error!",NULL
	406

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Strings.asm@ 375

Download in other formats: