Context Navigation

source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/Strings.asm@ 304

Visit:

Last change on this file since 304 was 293, checked in by krille_n_@…, 12 years ago

Commit 1/2 (Library, Configurators and Serial Server):

Changed Emulate.inc so that making 286 and 386 versions now works. Additionally, only one processor type define is needed in the makefile.
Minor optimizations.
Fixed spelling and did some cleaning.

File size: 16.3 KB

Rev	Line
[57]	1	; Project name : XTIDE Universal BIOS Configurator v2
	2	; Description : All strings.
	3
	4	; Section containing initialized data
	5	SECTION .data
	6
	7	; Menu title
	8	g_szProgramTitle:
[280]	9	db "Configuration and Flashing program for XTIDE Universal BIOS v2.0.0.",LF,CR,NULL
[282]	10	g_szXtideUniversalBiosSignature: db "XTIDE200",NULL
[57]	11	g_szBiosIsNotLoaded: db "BIOS is not loaded!",NULL
	12	g_szEEPROM: db "EEPROM",NULL
	13	g_szSourceAndTypeSeparator: db " : ",NULL
	14	g_szUnidentified: db "Unidentified",NULL
	15	g_szUnsaved: db " ",SINGLE_LEFT_HORIZONTAL_TO_VERTICAL,
[242]	16	db "Unsaved",SINGLE_RIGHT_HORIZONTAL_TO_VERTICAL,NULL
[108]	17
[57]	18	; Item formatting
	19	g_szFormatItemWithoutValue: db "%c%s",NULL
[59]	20	g_szFormatItemNameWithValue: db "%25s%-10S",NULL
[57]	21
	22
	23	g_szNo: db "No",NULL
[108]	24	g_szMultichoiceBooleanFlag:
[57]	25	db "No",LF
[293]	26	g_szYes: db "Yes",NULL
[57]	27
[59]	28	; Exit messages
	29	g_szDlgExitToDos: db "Exit to DOS?",NULL
	30	g_szDlgSaveChanges: db "Do you want to save changes to XTIDE Universal BIOS image file?",NULL
[57]	31
[59]	32
[57]	33	; Generic dialog strings
	34	g_szNotificationDialog: db "Notification.",NULL
	35	g_szErrorDialog: db "Error!",NULL
	36	g_szGenericDialogInfo: db "Press ENTER or ESC to close dialog.",NULL
	37
[65]	38	; Flashing related strings
[109]	39	g_szFlashTitle: db "Flashing EEPROM, please wait.",NULL
[68]	40	g_szErrEepromTooSmall: db "Image is too large for selected EEPROM type!",NULL
[65]	41	g_szErrEepromPolling: db "Timeout when polling EEPROM.",LF
	42	db "EEPROM was not flashed properly!",NULL
	43	g_szErrEepromVerify: db "EEPROM did not return the same byte that was written.",LF
	44	db "EEPROM was not flashed properly!",NULL
[293]	45	g_szPCFlashSuccessful: db "EEPROM was written successfully.",LF
[65]	46	db "Press any key to reboot.",NULL
	47	g_szForeignFlash: db "EEPROM was written successfully.",NULL
[57]	48
[65]	49
[57]	50	; Strings for main menu
	51	g_szItemMainExitToDOS: db "Exit to DOS",NULL
	52	g_szItemMainLoadFile: db "Load BIOS from file",NULL
	53	g_szItemMainLoadROM: db "Load BIOS from EEPROM",NULL
	54	g_szItemMainLoadStngs: db "Load old settings from EEPROM",NULL
	55	g_szItemMainConfigure: db "Configure XTIDE Universal BIOS",NULL
	56	g_szItemMainFlash: db "Flash EEPROM",NULL
	57
	58	g_szDlgMainLoadROM: db "Successfully loaded XTIDE Universal BIOS from EEPROM.",NULL
	59	g_szDlgMainLoadStngs: db "Successfully loaded settings from EEPROM.",NULL
	60	g_szDlgMainLoadFile: db "Successfully loaded file for flashing.",NULL
	61	g_szDlgMainSaveFile: db "Successfully saved XTIDE Universal BIOS to file.",NULL
	62	g_szDlgMainFileTooBig: db "Selected file is too big to be loaded for flashing!",NULL
	63	g_szDlgMainLoadErr: db "Failed to load file!",NULL
	64	g_szDlgMainSaveErr: db "Failed to save file!",NULL
	65	g_szDlgFileTitle: db "Select file to be flashed.",NULL
	66	g_szDlgFileFilter: db ".",NULL
	67
[199]	68
[57]	69	g_szNfoMainExitToDOS: db "Quits XTIDE Universal BIOS Configurator.",NULL
	70	g_szNfoMainLoadFile: db "Load BIOS file to be configured or flashed.",NULL
	71	g_szNfoMainLoadROM: db "Load BIOS from EEPROM to be reconfigured.",NULL
	72	g_szNfoMainLoadStngs: db "Load old XTIDE Universal BIOS settings from EEPROM.",NULL
	73	g_szNfoMainConfigure: db "Configure XTIDE Universal BIOS settings.",NULL
	74	g_szNfoMainFlash: db "Flash loaded BIOS image to EEPROM.",NULL
	75
	76
	77	; Strings for XTIDE Universal BIOS configuration menu
	78	g_szItemCfgBackToMain: db "Back to Main Menu",NULL
	79	g_szItemCfgIde1: db "Primary IDE Controller",NULL
	80	g_szItemCfgIde2: db "Secondary IDE Controller",NULL
	81	g_szItemCfgIde3: db "Tertiary IDE Controller",NULL
	82	g_szItemCfgIde4: db "Quaternary IDE Controller",NULL
[290]	83	g_szItemCfgBootMenu: db "Boot settings",NULL
[57]	84	g_szItemCfgFullMode: db "Full operating mode",NULL
	85	g_szItemCfgStealSize: db "kiB to steal from RAM",NULL
[59]	86	g_szItemCfgIdeCnt: db "IDE controllers",NULL
[57]	87
	88	g_szDlgCfgFullMode: db "Enable full operating mode?",NULL
	89	g_szDlgCfgStealSize: db "How many kiB of base memory to steal for XTIDE Universal BIOS variables (1...255)?",NULL
[153]	90	g_szDlgCfgIdeCnt: db "How many IDE controllers to manage (1...4)?",NULL
[57]	91
	92	g_szNfoCfgIde: db "IDE controller and drive configuration.",NULL
[290]	93	g_szNfoCfgBootMenu: db "Boot configuration.",NULL
[57]	94	g_szNfoCfgFullMode: db "Full mode supports multiple controllers and has more features.",NULL
[59]	95	g_szNfoCfgStealSize: db "How many kiB's to steal from Conventional memory for XTIDE Universal BIOS variables.",NULL
[57]	96	g_szNfoCfgIdeCnt: db "Number of IDE controllers to manage.",NULL
	97
[258]	98	g_szSerialMoved: db "A Serial Controller has been moved to the end of the Controller list. No further action is required. Serial Controllers must be placed at the end of the list.",NULL
	99
[68]	100	g_szHelpCfgFullMode: incbin "Configuration_FullMode.txt"
	101	db NULL
	102	g_szHelpCfgStealSize: incbin "Configuration_StealSize.txt"
	103	db NULL
[57]	104
	105	; Strings for IDE Controller menu
	106	g_szItemBackToCfgMenu: db "Back to Configuration Menu",NULL
	107	g_szItemIdeMaster: db "Master Drive",NULL
	108	g_szItemIdeSlave: db "Slave Drive",NULL
[153]	109	g_szItemIdeDevice: db "Device type",NULL
[57]	110	g_szItemIdeCmdPort: db "Base (cmd block) address",NULL
	111	g_szItemIdeCtrlPort: db "Control block address",NULL
	112	g_szItemIdeEnIRQ: db "Enable interrupt",NULL
	113	g_szItemIdeIRQ: db "IRQ",NULL
[199]	114	g_szItemSerialCOM: db "COM Port",NULL
	115	g_szItemSerialBaud: db "Baud Rate",NULL
	116	g_szItemSerialPort: db "COM Port I/O address",NULL
[57]	117
[199]	118	g_szItemIdeSerialComPort: db "COM port",NULL
	119	g_szItemIdeSerialBaudRate: db "Baud rate",NULL
	120
[153]	121	g_szDlgDevice: db "Select controller type.",NULL
[57]	122	g_szDlgIdeCmdPort: db "Enter IDE command block (base port) address.",NULL
	123	g_szDlgIdeCtrlPort: db "Enter IDE control block address (usually command block + 200h).",NULL
	124	g_szDlgIdeEnIRQ: db "Enable interrupt?",NULL
	125	g_szDlgIdeIRQ: db "Enter IRQ channel (2...7 for 8-bit controllers, 2...15 for any other controller).",NULL
[242]	126
[57]	127	g_szNfoIdeBackToCfgMenu:db "Back to XTIDE Universal BIOS Configuration Menu.",NULL
	128	g_szNfoIdeMaster: db "Settings for Master Drive.",NULL
	129	g_szNfoIdeSlave: db "Settings for Slave Drive.",NULL
[153]	130	g_szNfoIdeDevice: db "Select controller device type.",NULL
[57]	131	g_szNfoIdeCmdPort: db "IDE Controller Command Block (base port) address.",NULL
[199]	132	g_szNfoIdeCtrlPort: db "IDE Controller Control Block address. Usually Cmd Block + 8 for XTIDE, and Cmd Block + 200h for ATA.",NULL
[57]	133	g_szNfoIdeEnIRQ: db "Interrupt or polling mode.",NULL
	134	g_szNfoIdeIRQ: db "IRQ channel to use.",NULL
[199]	135	g_szNfoIdeSerialCOM: db "Select a COM port by number.",NULL
[203]	136	g_szNfoIdeSerialBaud: db "Select the COM port's Baud Rate. The server must match this speed. Note that UART clock multipliers may impact the actual speed.",NULL
[242]	137	g_szNfoIdeSerialPort: db "Select a COM port by custom I/O port address. Any address is valid up to 3f8h, but must be on an 8-byte boundary.",NULL
[57]	138
[68]	139	g_szHelpIdeCmdPort: incbin "IDE_CommandPort.txt"
	140	db NULL
	141	g_szHelpIdeCtrlPort: incbin "IDE_ControlPort.txt"
	142	db NULL
	143	g_szHelpIdeEnIRQ: incbin "IDE_EnableInterrupt.txt"
	144	db NULL
	145	g_szHelpIdeIRQ: incbin "IDE_IRQ.txt"
	146	db NULL
[199]	147	g_szHelpIdeSerialCOM: incbin "IDE_SerialCOM.txt"
	148	db NULL
	149	g_szHelpIdeSerialPort: incbin "IDE_SerialPort.txt"
	150	db NULL
	151	g_szHelpIdeSerialBaud: incbin "IDE_SerialBaud.txt"
	152	db NULL
[57]	153
[153]	154	g_szMultichoiceCfgDevice:
[57]	155	db "8-bit dual port (XTIDE)",LF
[286]	156	db "XTIDE mod (A0<->A3)",LF
[57]	157	db "8-bit single port",LF
[153]	158	db "16-bit standard IDE",LF
	159	db "32-bit generic IDE",LF
[286]	160	db "Serial port virtual device",LF
	161	db "JR-IDE/ISA",NULL
[57]	162
[199]	163	g_szSerialCOMChoice:
[233]	164	db "COM1 - address 3f8h",LF
	165	db "COM2 - address 2f8h",LF
	166	db "COM3 - address 3e8h",LF
	167	db "COM4 - address 2e8h",LF
	168	db "COM5 - address 2f0h",LF
	169	db "COM6 - address 3e0h",LF
	170	db "COM7 - address 2e0h",LF
	171	db "COM8 - address 260h",LF
	172	db "COM9 - address 368h",LF
	173	db "COMA - address 268h",LF
	174	db "COMB - address 360h",LF
	175	db "COMC - address 270h",LF
	176	db "COMx - Custom address",NULL
[199]	177
	178	g_szValueCfgCOM1: db "COM1",NULL
	179	g_szValueCfgCOM2: db "COM2",NULL
	180	g_szValueCfgCOM3: db "COM3",NULL
	181	g_szValueCfgCOM4: db "COM4",NULL
	182	g_szValueCfgCOM5: db "COM5",NULL
	183	g_szValueCfgCOM6: db "COM6",NULL
	184	g_szValueCfgCOM7: db "COM7",NULL
	185	g_szValueCfgCOM8: db "COM8",NULL
	186	g_szValueCfgCOM9: db "COM9",NULL
	187	g_szValueCfgCOMA: db "COMA",NULL
	188	g_szValueCfgCOMB: db "COMB",NULL
	189	g_szValueCfgCOMC: db "COMC",NULL
	190	g_szValueCfgCOMx: db "Custom",NULL
[242]	191
[199]	192	g_szSerialBaudChoice:
[233]	193	db "115.2K baud",LF
	194	db "57.6K baud",LF
	195	db "38.4K baud",LF
	196	db "28.8K baud",LF
	197	db "19.2K baud",LF
[199]	198	db "9600 baud",LF
[242]	199	db "4800 baud",LF
[233]	200	db "2400 baud",NULL
[199]	201
[233]	202	g_szValueCfgBaud115_2: db "115.2K",NULL
	203	g_szValueCfgBaud57_6: db "57.6K",NULL
	204	g_szValueCfgBaud38_4: db "38.4K",NULL
	205	g_szValueCfgBaud28_8: db "28.8K",NULL
	206	g_szValueCfgBaud19_2: db "19.2K",NULL
	207	g_szValueCfgBaud9600: db "9600",NULL
[242]	208	g_szValueCfgBaud4800: db "4800",NULL
[199]	209	g_szValueCfgBaud2400: db "2400",NULL
[233]	210
[242]	211
[153]	212	g_szValueCfgDeviceDual8b: db "XTIDE",NULL
[286]	213	g_szValueCfgDeviceMod: db "XTIDEmod",NULL
[153]	214	g_szValueCfgDeviceSingle8b: db "8-bit",NULL
	215	g_szValueCfgDevice16b: db "16-bit",NULL
	216	g_szValueCfgDevice32b: db "32-bit",NULL
[199]	217	g_szValueCfgDeviceSerial: db "Serial",NULL
[286]	218	g_szValueCfgDeviceJrIdeIsa: db "JR-ISA",NULL
[57]	219
	220
	221	; Strings for DRVPARAMS menu
	222	g_szItemDrvBackToIde: db "Back to IDE Controller Menu",NULL
	223	g_szItemDrvBlockMode: db "Block Mode Transfers",NULL
[286]	224	g_szItemDrvWriteCache: db "Internal Write Cache",NULL
[57]	225	g_szItemDrvUserCHS: db "User specified CHS",NULL
	226	g_szItemDrvCyls: db "Cylinders",NULL
	227	g_szItemDrvHeads: db "Heads",NULL
	228	g_szItemDrvSect: db "Sectors per track",NULL
[286]	229	g_szItemDrvUserLBA: db "User specified LBA",NULL
	230	g_szItemDrvLbaSectors: db "Millions of sectors",NULL
[57]	231
	232	g_szDlgDrvBlockMode: db "Enable Block Mode Transfers?",NULL
[286]	233	g_szDlgDrvWriteCache: db "Select hard drive internal write cache settings.",NULL
[57]	234	g_szDlgDrvUserCHS: db "Specify (P-)CHS parameters manually?",NULL
	235	g_szDlgDrvCyls: db "Enter number of P-CHS cylinders (1...16383).",NULL
	236	g_szDlgDrvHeads: db "Enter number of P-CHS heads (1...16).",NULL
	237	g_szDlgDrvSect: db "Enter number of sectors per track (1...63).",NULL
[286]	238	g_szDlgDrvUserLBA: db "Limit drive capacity?",NULL
	239	g_szDlgDrvLbaSectors: db "Enter maximum capacity in millions of sectors (16...256).",NULL
[57]	240
	241	g_szNfoDrvBlockMode: db "Transfer multiple sectors per data request.",NULL
[286]	242	g_szNfoDrvWriteCache: db "Hard Drive Internal Write Cache settings (WARNING!).",NULL
[59]	243	g_szNfoDrvUserCHS: db "Specify (P-)CHS parameters manually instead of autodetecting them.",NULL
[57]	244	g_szNfoDrvCyls: db "Number of user specified P-CHS cylinders.",NULL
	245	g_szNfoDrvHeads: db "Number of user specified P-CHS heads.",NULL
	246	g_szNfoDrvSect: db "Number of user specified P-CHS sectors per track.",NULL
[286]	247	g_szNfoDrvUserLBA: db "Limit drive capacity to X million sectors.",NULL
	248	g_szNfoDrvLbaSectors: db "Millions of sectors (1024*1024). 1M sectors = 512 MiB.",NULL
[57]	249
[68]	250	g_szHelpDrvBlockMode: incbin "Drive_BlockMode.txt"
	251	db NULL
[286]	252	g_szHelpDrvWriteCache: incbin "Drive_WriteCache.txt"
	253	db NULL
[68]	254	g_szHelpDrvUserCHS: incbin "Drive_UserCHS.txt"
	255	db NULL
[286]	256	g_szHelpDrvUserLBA: incbin "Drive_UserLBA.txt"
	257	db NULL
	258
	259	g_szMultichoiseWrCache: db "Drive Default",LF
	260	db "Disable Write Cache",LF
	261	db "Enable Write Cache",NULL
[57]	262
[286]	263	g_szValueDrvWrCaDis: db "Disabled",NULL
	264	g_szValueDrvWrCaEn: db "Enabled",NULL
[57]	265
[286]	266
[290]	267	; Strings for boot settings menu
	268	g_szItemBootEnableMenu: db "Boot Menu",NULL
[57]	269	g_szItemBootTimeout: db "Selection timeout",NULL
	270	g_szItemBootDrive: db "Default boot drive",NULL
[144]	271	g_szItemBootDispMode: db "Display Mode",NULL
[59]	272	g_szItemBootFloppyDrvs: db "Number of Floppy Drives",NULL
[57]	273	g_szItemBootSwap: db "Swap boot drive numbers",NULL
[199]	274	g_szItemSerialDetect: db "Scan for Serial Drives",NULL
[57]	275
[290]	276	g_szDlgBootEnableMenu: db "Enable Boot Menu?",NULL
	277	g_szDlgBootTimeout: db "Enter Boot Menu selection timeout in BIOS timer ticks (2...1092).",NULL
[57]	278	g_szDlgBootDrive: db "Enter default drive number (0xh for Floppy Drives, 8xh for Hard Disks, FFh for ROM boot).",NULL
[144]	279	g_szDlgBootDispMode: db "Select display mode for Boot Menu.",NULL
	280	g_szDlgBootFloppyDrvs: db "Select number of Floppy Drives to display on boot menu.",NULL
[57]	281	g_szDlgBootSwap: db "Enable drive number translation?",NULL
[199]	282	g_szDlgSerialDetect: db "Scan for serial drives?",NULL
[242]	283
[290]	284	g_szNfoBootEnableMenu: db "Enable to display boot drive selection menu.",NULL
	285	g_szNfoBootTimeout: db "Menu item selection timeout in BIOS timer ticks. 1 tick = 54.9 ms.",NULL
[57]	286	g_szNfoBootDrive: db "Default drive on boot menu.",NULL
[144]	287	g_szNfoDispMode: db "Display Mode for Boot Menu.",NULL
[59]	288	g_szNfoBootFloppyDrvs: db "Number of Floppy Drives to display on boot menu.",NULL
[57]	289	g_szNfoBootSwap: db "Drive Number Translation (swap first drive with selected).",NULL
[203]	290	g_szNfoSerialDetect: db "Scans all standard COM ports for serial drives. This can also be invoked by holding down ALT at the end of normal drive detection.",NULL
[57]	291
[68]	292	g_szHelpBootTimeout: incbin "Bootmenu_Timeout.txt"
	293	db NULL
	294	g_szHelpBootDrive: incbin "Bootmenu_DefaultDrive.txt"
	295	db NULL
	296	g_szHelpBootFloppyDrvs: incbin "Bootmenu_FloppyDrives.txt"
	297	db NULL
	298	g_szHelpBootSwap: incbin "Bootmenu_SwapDrives.txt"
	299	db NULL
[199]	300	g_szHelpSerialDetect: incbin "Bootmenu_SerialDetect.txt"
	301	db NULL
[57]	302
[144]	303	g_szMultichoiceBootDispMode:
	304	db "Default",LF
	305	db "40x25 Black & White",LF
	306	db "40x25 Color",LF
	307	db "80x25 Black & White",LF
	308	db "80x25 Color",LF
	309	db "80x25 Monochrome",NULL
	310
[108]	311	g_szMultichoiceBootFloppyDrvs:
[59]	312	db "Autodetect",LF
	313	db "1",LF
	314	db "2",LF
	315	db "3",LF
	316	db "4",NULL
[57]	317
[144]	318	g_szValueBootDispModeDefault: db "Default",NULL
	319	g_szValueBootDispModeBW40: db "BW40",NULL
	320	g_szValueBootDispModeCO40: db "CO40",NULL
	321	g_szValueBootDispModeBW80: db "BW80",NULL
	322	g_szValueBootDispModeCO80: db "CO80",NULL
	323	g_szValueBootDispModeMono: db "Mono",NULL
	324
[59]	325	g_szValueBootFloppyDrvsAuto: db "Auto",NULL
	326	g_szValueBootFloppyDrvs1: db "1",NULL
	327	g_szValueBootFloppyDrvs2: db "2",NULL
	328	g_szValueBootFloppyDrvs3: db "3",NULL
	329	g_szValueBootFloppyDrvs4: db "4",NULL
	330
	331
[57]	332	; Strings for Flash menu
	333	g_szItemFlashStart: db "Start flashing",NULL
[59]	334	g_szItemFlashEepromType:db "EEPROM type",NULL
[57]	335	g_szItemFlashSDP: db "SDP command",NULL
	336	g_szItemFlashAddr: db "EEPROM address",NULL
	337	g_szItemFlashPageSize: db "Page size",NULL
	338	g_szItemFlashChecksum: db "Generate checksum byte",NULL
	339
[59]	340	g_szDlgFlashEepromType: db "Select EEPROM type.",NULL
	341	g_szDlgFlashSDP: db "Select Software Data Protection command.",NULL
[57]	342	g_szDlgFlashAddr: db "Enter segment address where EEPROM is located.",NULL
[59]	343	g_szDlgFlashPageSize: db "Select write page size.",NULL
[57]	344	g_szDlgFlashChecksum: db "Generate checksum byte to the end of BIOS image?",NULL
	345
[59]	346	g_szNfoFlashEepromType: db "EEPROM type.",NULL
[57]	347	g_szNfoFlashStart: db "Writes BIOS to EEPROM.",NULL
	348	g_szNfoFlashSDP: db "Software Data Protection command.",NULL
	349	g_szNfoFlashAddr: db "Address (segment) where EEPROM is located.",NULL
	350	g_szNfoFlashPageSize: db "Number of bytes to write before delay.",NULL
	351	g_szNfoFlashChecksum: db "Generate checksum byte to the end of BIOS image.",NULL
	352
[68]	353	g_szHelpFlashSDP: incbin "Flash_SdpCommand.txt"
	354	db NULL
	355	g_szHelpFlashPageSize: incbin "Flash_PageSize.txt"
	356	db NULL
	357	g_szHelpFlashChecksum: incbin "Flash_Checksum.txt"
	358	db NULL
[57]	359
[108]	360	g_szMultichoiceEepromType:
[59]	361	db "2816 (2 kiB)",LF
	362	db "2864 (8 kiB)",LF
[159]	363	db "2864 mod (8 kiB)",LF
[59]	364	db "28256 (32 kiB)",LF
	365	db "28512 (64 kiB)",NULL
	366	g_szValueFlash2816: db "2816",NULL
	367	g_szValueFlash2864: db "2864",NULL
[159]	368	g_szValueFlash2864Mod: db "2864mod",NULL
[59]	369	g_szValueFlash28256: db "28256",NULL
	370	g_szValueFlash28512: db "28512",NULL
[57]	371
[108]	372	g_szMultichoiceSdpCommand:
[59]	373	db "None",LF
	374	db "Enable",LF
[293]	375	g_szValueFlashDisable: db "Disable",NULL
[59]	376	g_szValueFlashNone: db "None",NULL
	377	g_szValueFlashEnable: db "Enable",NULL
[57]	378
[108]	379	g_szMultichoicePageSize:
[59]	380	db "1 byte",LF
	381	db "2 bytes",LF
	382	db "4 bytes",LF
	383	db "8 bytes",LF
	384	db "16 bytes",LF
	385	db "32 bytes",LF
[293]	386	g_szValueFlash64bytes: db "64 bytes",NULL
[65]	387	g_szValueFlash1byte: db "1 byte",NULL
[59]	388	g_szValueFlash2bytes: db "2 bytes",NULL
	389	g_szValueFlash4bytes: db "4 bytes",NULL
	390	g_szValueFlash8bytes: db "8 bytes",NULL
	391	g_szValueFlash16bytes: db "16 bytes",NULL
	392	g_szValueFlash32bytes: db "32 bytes",NULL
[185]	393
	394	g_szSelectionTimeout: db DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2u s",NULL
	395
[233]	396	g_szDashForZero: db "- ",NULL
	397
	398	g_szValueUnknownError: db "Error!",NULL
	399

Note: See TracBrowser for help on using the repository browser.

Download in other formats: