source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/MenuEvents.asm@ 613

Last change on this file since 613 was 592, checked in by Krister Nordvall, 6 years ago

Changes:

  • The problem with NASM in the previous revision (r591) has been fixed.
  • The colors used by the boot menu and hotkey bar can now be customized by selecting one of a number of pre-defined color themes. Suggestions for additional themes are more than welcome!
  • Large builds are now 10 KB. Small builds are still 8 KB with the exception of the Tiny build which is now 4 KB. In other words, builds are now as small as possible to make it easier to combine them with other BIOSes.
  • Added code to the library to improve drive error handling. XTIDECFG can now handle "Drive Not Ready" errors.
  • Fixed a couple of potential bugs in AtaID.asm (AtaID_GetMaxPioModeToAXandMinCycleTimeToCX); 1) ATA1.bPioMode was treated as a WORD variable. 2) ATA2.bPIOSupp was assumed to be non-zero which would result in PIO mode 3 being returned if the assumption was wrong.
  • Made the same changes in the equivalent function used by BIOSDRVS (DisplayPioModeInformationUsingAtaInfoFromDSBX in AtaInfo.asm).
  • Fixed a bug from r587 in PDC20x30.asm in PDC20x30_GetMaxPioModeToALandMinPioCycleTimeToBX.
  • Fixed a bug from r523 in XTIDECFG where Auto Configure would only set the IRQ on one IDE interface on AT-builds.
  • XTIDECFG will now restore the default settings for the "Serial port virtual device" when reselecting it in the list of device types. This makes it behave consistently for all device types.
  • The eAAM macro is now used regardless if USE_UNDOC_INTEL is defined or not because it is apparently supported on all processors including the NEC V20/V30 CPUs.
  • Renamed the EXCLUDE_FROM_XTIDE_UNIVERSAL_BIOS define to EXCLUDE_FROM_XUB.
  • Added a define to exclude unused library code from BIOSDRVS (EXCLUDE_FROM_BIOSDRVS). This makes it a lot smaller than in previous revisions.
  • All unnecessary CLD-instructions are now under a new define 'CLD_NEEDED' which is only enabled for the BIOS. It is disabled for XTIDECFG and BIOSDRVS but can be enabled if needed by adding this define to the respective makefile. This change was made because these unnecessary instructions are wasteful and should never be needed. In fact, they only serve to hide bugs (in other peoples code) which I strongly believe should be avoided. I recommend people making their own BIOSes from source to not use this define as it's extremely unlikely to be needed.
  • Updated the copyright info in SerDrive and changed an URL to point to the new site.
  • Updated the copyright info and version number in BIOSDRVS.
  • Updated the copyright info in XTIDECFG.
  • Optimizations in general.
File size: 6.7 KB
Line 
1; Project name : XTIDE Universal BIOS Configurator v2
2; Description : Menu event handling.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; MenuEvents_DisplayMenu
25; Parameters:
26; Nothing
27; Returns:
28; Nothing
29; Corrupts registers:
30; All, except segments
31;--------------------------------------------------------------------
32ALIGN JUMP_ALIGN
33MenuEvents_DisplayMenu:
34 mov bx, MenuEventHandler
35 JMP_MENU_LIBRARY DisplayWithHandlerInBXandUserDataInDXAX
36
37
38;--------------------------------------------------------------------
39; MenuEventHandler
40; Common parameters for all events:
41; BX: Menu event (anything from MENUEVENT struct)
42; SS:BP: Menu library handle
43; Common return values for all events:
44; CF: Set if event processed
45; Cleared if event not processed
46; Corrupts registers:
47; All
48;--------------------------------------------------------------------
49ALIGN JUMP_ALIGN
50MenuEventHandler:
51 cmp bx, MENUEVENT.RefreshItemFromCX ; Above last supported item?
52 ja SHORT .EventNotHandled
53 jmp [cs:bx+.rgfnEventSpecificHandlers]
54.EventNotHandled:
55.IdleProcessing:
56 clc
57 ret
58
59ALIGN WORD_ALIGN
60.rgfnEventSpecificHandlers:
61 dw .InitializeMenuinitFromDSSI
62 dw .ExitMenu
63 dw .IdleProcessing
64 dw .ItemHighlightedFromCX
65 dw .ItemSelectedFromCX
66 dw .KeyStrokeInAX
67 dw .RefreshTitle
68 dw .RefreshInformation
69 dw .RefreshItemFromCX
70
71
72; Parameters:
73; DS:SI: Ptr to MENUINIT struct to initialize
74; Returns:
75; DS:SI: Ptr to initialized MENUINIT struct
76ALIGN JUMP_ALIGN
77.InitializeMenuinitFromDSSI:
78 push ds
79 push cs
80 pop ds
81 mov di, g_MenupageForMainMenu
82 call Menupage_SetActiveMenupageFromDSDI
83 call Menupage_GetVisibleMenuitemsToAXfromDSDI
84 pop ds
85
86 mov [si+MENUINIT.wItems], ax
87 mov WORD [si+MENUINIT.wTitleAndInfoLines], INFO_LINES_IN_MENU << 8 | TITLE_LINES_IN_MENU
88 mov BYTE [si+MENUINIT.bWidth], MENU_WIDTH
89 CALL_DISPLAY_LIBRARY GetColumnsToALandRowsToAH
90 mov [si+MENUINIT.bHeight], ah
91 call MainMenu_EnterMenuOrModifyItemVisibility
92 stc
93 ret
94
95
96; Parameters:
97; None
98; Returns:
99; CF: Set to exit menu
100; Clear to cancel exit
101ALIGN JUMP_ALIGN
102.ExitMenu:
103 call Menupage_GetActiveMenupageToDSDI
104 mov si, [di+MENUPAGE.fnBack]
105 cmp si, ExitToDosFromBackButton
106 je SHORT .QuitProgram
107 call si ; Back to previous menu
108 clc
109 ret
110
111ALIGN JUMP_ALIGN
112.QuitProgram:
113 mov bx, g_szDlgExitToDos
114 call Dialogs_DisplayYesNoResponseDialogWithTitleStringInBX
115 jz SHORT .ExitToDOS
116 clc
117 ret
118.ExitToDOS:
119 call Buffers_SaveChangesIfFileLoaded
120 CALL_MENU_LIBRARY Close
121 stc
122 ret
123
124
125; Parameters:
126; CX: Index of new highlighted item
127; DX: Index of previously highlighted item or NO_ITEM_HIGHLIGHTED
128ALIGN JUMP_ALIGN
129.ItemHighlightedFromCX:
130 CALL_MENU_LIBRARY ClearInformationArea
131 CALL_MENU_LIBRARY RefreshInformation
132 stc
133 ret
134
135
136; Parameters:
137; CX: Index of selected item
138ALIGN JUMP_ALIGN
139.ItemSelectedFromCX:
140 call Menupage_GetActiveMenupageToDSDI
141 call Menupage_GetCXthVisibleMenuitemToDSSIfromDSDI
142 call [si+MENUITEM.fnActivate]
143 stc
144 ret
145
146
147; Parameters:
148; AL: ASCII character for the key
149; AH: Keyboard library scan code for the key
150ALIGN JUMP_ALIGN
151.KeyStrokeInAX:
152 cmp ah, KEY_DISPLAY_ITEM_HELP
153 jne SHORT .EventNotHandled
154
155;ALIGN JUMP_ALIGN
156;.DisplayHelp:
157 call Menupage_GetActiveMenupageToDSDI
158 CALL_MENU_LIBRARY GetHighlightedItemToAX
159 xchg cx, ax
160 call Menupage_GetCXthVisibleMenuitemToDSSIfromDSDI
161 call Menuitem_DisplayHelpMessageFromDSSI
162 stc
163 ret
164
165
166; Parameters:
167; CX: Index of item to refresh
168; Cursor has been positioned to the beginning of item line
169ALIGN JUMP_ALIGN
170.RefreshItemFromCX:
171 inc cx ; NO_ITEM_HIGHLIGHTED ?
172 jz SHORT .NothingToRefresh
173 dec cx
174 call Menupage_GetActiveMenupageToDSDI
175 call Menupage_GetCXthVisibleMenuitemToDSSIfromDSDI
176 jnc SHORT .NothingToRefresh
177 call MenuitemPrint_NameWithPossibleValueFromDSSI
178.NothingToRefresh:
179 stc
180 ret
181
182
183; Parameters:
184; CX: Index of highlighted item
185; Cursor has been positioned to the beginning of first line
186ALIGN JUMP_ALIGN
187.RefreshInformation:
188 inc cx ; NO_ITEM_HIGHLIGHTED ?
189 jz SHORT .NothingToRefresh
190 dec cx
191 call Menupage_GetActiveMenupageToDSDI
192 call Menupage_GetCXthVisibleMenuitemToDSSIfromDSDI
193 call MenuitemPrint_PrintQuickInfoFromDSSI
194 stc
195 ret
196
197
198; Parameters:
199; CX: Index of highlighted item
200; Cursor has been positioned to the beginning of first line
201ALIGN JUMP_ALIGN
202.RefreshTitle:
203 call .PrintProgramName
204 call .PrintLoadStatus
205 call .PrintStatusOfUnsavedChanges
206 stc
207.ReturnSinceNothingToPrint:
208 ret
209
210ALIGN JUMP_ALIGN
211.PrintProgramName:
212 mov si, g_szProgramTitle
213 JMP_DISPLAY_LIBRARY PrintNullTerminatedStringFromCSSI
214
215ALIGN JUMP_ALIGN
216.PrintLoadStatus:
217 mov al, [g_cfgVars+CFGVARS.wFlags]
218 test al, FLG_CFGVARS_FILELOADED
219 jnz SHORT .PrintNameOfLoadedFile
220 test al, FLG_CFGVARS_ROMLOADED
221 mov si, g_szEEPROM
222 jnz SHORT .PrintNameOfLoadedFileOrEeprom
223 ; Fall to .PrintNothingLoaded
224
225.PrintNothingLoaded:
226 mov si, g_szBiosIsNotLoaded
227 JMP_DISPLAY_LIBRARY PrintNullTerminatedStringFromCSSI
228
229ALIGN JUMP_ALIGN
230.PrintNameOfLoadedFile:
231 mov si, g_cfgVars+CFGVARS.szOpenedFile
232 ; Fall to .PrintNameOfLoadedFileOrEeprom
233
234ALIGN JUMP_ALIGN
235.PrintNameOfLoadedFileOrEeprom:
236 CALL_DISPLAY_LIBRARY PrintNullTerminatedStringFromCSSI
237 ; Fall to .PrintTypeOfLoadedBios
238
239.PrintTypeOfLoadedBios:
240 mov si, g_szSourceAndTypeSeparator
241 CALL_DISPLAY_LIBRARY PrintNullTerminatedStringFromCSSI
242 call Buffers_IsXtideUniversalBiosLoaded
243 jne SHORT .PrintUnidentifiedType
244
245 call Buffers_GetFileBufferToESDI
246 mov bx, es
247 lea si, [di+ROMVARS.szVersion]
248 JMP_DISPLAY_LIBRARY PrintNullTerminatedStringFromBXSI
249
250ALIGN JUMP_ALIGN
251.PrintUnidentifiedType:
252 mov si, g_szUnidentified
253 JMP_DISPLAY_LIBRARY PrintNullTerminatedStringFromCSSI
254
255ALIGN JUMP_ALIGN
256.PrintStatusOfUnsavedChanges:
257 test BYTE [g_cfgVars+CFGVARS.wFlags], FLG_CFGVARS_UNSAVED
258 jz SHORT .ReturnSinceNothingToPrint
259 mov si, g_szUnsaved
260 JMP_DISPLAY_LIBRARY PrintNullTerminatedStringFromCSSI
Note: See TracBrowser for help on using the repository browser.