[497] | 1 | ; Project name : XTIDE Universal BIOS Configurator v2
|
---|
| 2 | ; Description : Functions to detect ports and devices.
|
---|
| 3 |
|
---|
| 4 | ;
|
---|
| 5 | ; XTIDE Universal BIOS and Associated Tools
|
---|
[526] | 6 | ; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
|
---|
[497] | 7 | ;
|
---|
| 8 | ; This program is free software; you can redistribute it and/or modify
|
---|
| 9 | ; it under the terms of the GNU General Public License as published by
|
---|
| 10 | ; the Free Software Foundation; either version 2 of the License, or
|
---|
| 11 | ; (at your option) any later version.
|
---|
| 12 | ;
|
---|
| 13 | ; This program is distributed in the hope that it will be useful,
|
---|
| 14 | ; but WITHOUT ANY WARRANTY; without even the implied warranty of
|
---|
| 15 | ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
---|
| 16 | ; GNU General Public License for more details.
|
---|
| 17 | ; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
|
---|
| 18 | ;
|
---|
| 19 |
|
---|
| 20 | ; Section containing code
|
---|
| 21 | SECTION .text
|
---|
| 22 |
|
---|
[518] | 23 | IDE_PORT_TO_START_DETECTION EQU 00h ; Must be zero (not actual port)
|
---|
| 24 | FIRST_MEMORY_SEGMENT_ADDRESS EQU 0C000h
|
---|
| 25 |
|
---|
[497] | 26 | ;--------------------------------------------------------------------
|
---|
[505] | 27 | ; IdeAutodetect_DetectIdeDeviceFromPortDXAndReturnControlBlockInSI
|
---|
[497] | 28 | ; Parameters:
|
---|
[504] | 29 | ; DX: IDE Base Port or segment address (Command Block)
|
---|
[497] | 30 | ; DS:DI: Ptr to ROMVARS
|
---|
| 31 | ; Returns:
|
---|
| 32 | ; AL: Device Type
|
---|
[504] | 33 | ; SI: IDE Control Block Base port (port mapped devices only)
|
---|
[497] | 34 | ; CF: Clear if IDE Device found
|
---|
| 35 | ; Set if IDE Device not found
|
---|
| 36 | ; Corrupts registers:
|
---|
[502] | 37 | ; AH, BX
|
---|
[497] | 38 | ;--------------------------------------------------------------------
|
---|
[504] | 39 | IdeAutodetect_DetectIdeDeviceFromPortDXAndReturnControlBlockInSI:
|
---|
[567] | 40 | cmp dh, FIRST_MEMORY_SEGMENT_ADDRESS >> 8
|
---|
[504] | 41 | jb SHORT DetectPortMappedDeviceFromPortDX
|
---|
| 42 | ; Fall to DetectMemoryMappedDeviceFromSegmentDX
|
---|
[497] | 43 |
|
---|
[504] | 44 | ;--------------------------------------------------------------------
|
---|
| 45 | ; DetectMemoryMappedDeviceFromSegmentDX
|
---|
| 46 | ; Parameters:
|
---|
| 47 | ; DX: Segment address for Memory Mapped Device
|
---|
| 48 | ; DS:DI: Ptr to ROMVARS
|
---|
| 49 | ; Returns:
|
---|
| 50 | ; AL: Device Type
|
---|
| 51 | ; CF: Clear if IDE Device found
|
---|
| 52 | ; Set if IDE Device not found
|
---|
| 53 | ; Corrupts registers:
|
---|
| 54 | ; AH, BX
|
---|
| 55 | ;--------------------------------------------------------------------
|
---|
| 56 | DetectMemoryMappedDeviceFromSegmentDX:
|
---|
[567] | 57 | ; *** Try to detect JR-IDE/ISA and ADP50L (only if MODULE_8BIT_IDE_ADVANCED is present) ***
|
---|
[497] | 58 | test WORD [di+ROMVARS.wFlags], FLG_ROMVARS_MODULE_8BIT_IDE_ADVANCED
|
---|
[567] | 59 | stc
|
---|
| 60 | jz SHORT .NoIdeDeviceFound
|
---|
[497] | 61 |
|
---|
| 62 | push ds
|
---|
| 63 | mov ds, dx
|
---|
[567] | 64 |
|
---|
| 65 | cli
|
---|
[497] | 66 | mov ah, [JRIDE_COMMAND_BLOCK_REGISTER_WINDOW_OFFSET + STATUS_REGISTER_in]
|
---|
| 67 | mov al, [JRIDE_CONTROL_BLOCK_REGISTER_WINDOW_OFFSET + ALTERNATE_STATUS_REGISTER_in]
|
---|
[567] | 68 | sti
|
---|
[497] | 69 | call CompareIdeStatusRegistersFromALandAH
|
---|
[567] | 70 | mov al, DEVICE_8BIT_JRIDE_ISA
|
---|
| 71 | jnc .IdeDeviceFound
|
---|
| 72 |
|
---|
| 73 | cli
|
---|
| 74 | mov ah, [ADP50L_COMMAND_BLOCK_REGISTER_WINDOW_OFFSET + (STATUS_REGISTER_in << 1)]
|
---|
| 75 | mov al, [ADP50L_CONTROL_BLOCK_REGISTER_WINDOW_OFFSET + (ALTERNATE_STATUS_REGISTER_in << 1)]
|
---|
| 76 | sti
|
---|
| 77 | call CompareIdeStatusRegistersFromALandAH
|
---|
| 78 | mov al, DEVICE_8BIT_ADP50L
|
---|
| 79 |
|
---|
| 80 | .IdeDeviceFound:
|
---|
[518] | 81 | mov si, dx ; For IDEDTCT.COM
|
---|
[567] | 82 | pop ds
|
---|
| 83 | .NoIdeDeviceFound:
|
---|
| 84 | ret
|
---|
[497] | 85 |
|
---|
| 86 |
|
---|
[504] | 87 | ;--------------------------------------------------------------------
|
---|
| 88 | ; DetectPortMappedDeviceFromPortDX
|
---|
| 89 | ; Parameters:
|
---|
| 90 | ; DX: IDE Base Port (Command Block)
|
---|
| 91 | ; DS:DI: Ptr to ROMVARS
|
---|
| 92 | ; Returns:
|
---|
| 93 | ; AL: Device Type
|
---|
| 94 | ; SI: IDE Control Block Base port
|
---|
| 95 | ; CF: Clear if IDE Device found
|
---|
| 96 | ; Set if IDE Device not found
|
---|
| 97 | ; Corrupts registers:
|
---|
| 98 | ; AH, BX
|
---|
| 99 | ;--------------------------------------------------------------------
|
---|
| 100 | DetectPortMappedDeviceFromPortDX:
|
---|
[502] | 101 | ; *** Try to detect Standard 16- and 32-bit IDE Devices ***
|
---|
[504] | 102 | mov al, DEVICE_16BIT_ATA ; Assume 16-bit ISA slot for AT builds
|
---|
[497] | 103 | call Buffers_IsXTbuildLoaded
|
---|
[504] | 104 | eCMOVE al, DEVICE_8BIT_ATA ; Assume 8-bit ISA slot for XT builds
|
---|
[502] | 105 |
|
---|
[504] | 106 | ; Start with standard Control Block base port used by Primary and Secondary IDE
|
---|
| 107 | mov si, dx
|
---|
| 108 | add si, STANDARD_CONTROL_BLOCK_OFFSET
|
---|
| 109 | mov bx, STATUS_REGISTER_in | (ALTERNATE_STATUS_REGISTER_in << 8)
|
---|
| 110 | .RedetectTertiaryOrQuaternaryWithDifferentControlBlockAddress:
|
---|
| 111 | push ax ; Store device type
|
---|
| 112 | call DetectIdeDeviceFromPortsDXandSIwithOffsetsInBLandBH
|
---|
| 113 | pop ax ; Restore device type
|
---|
[497] | 114 | jnc SHORT .IdeDeviceFound
|
---|
| 115 |
|
---|
[502] | 116 | ; 16- or 32-bit IDE Device was not found but we may have used wrong Control Block port if we were trying
|
---|
| 117 | ; to detect Tertiary or Quaternary IDE controllers. Control Block port location is not standardized. For
|
---|
| 118 | ; example Promise FloppyMAX has Control Block at STANDARD_CONTROL_BLOCK_OFFSET but Sound Blaster 16 (CT2290)
|
---|
| 119 | ; use DEVICE_ATA_SECONDARY_PORTCTRL for Tertiary and Quaternary even though only Secondary should use that.
|
---|
[504] | 120 | call ChangeDifferentControlBlockAddressToSI
|
---|
| 121 | je SHORT .RedetectTertiaryOrQuaternaryWithDifferentControlBlockAddress
|
---|
[497] | 122 |
|
---|
[502] | 123 |
|
---|
[497] | 124 | ; Detect 8-bit devices only if MODULE_8BIT_IDE is available
|
---|
[567] | 125 | test BYTE [di+ROMVARS.wFlags], FLG_ROMVARS_MODULE_8BIT_IDE | FLG_ROMVARS_MODULE_8BIT_IDE_ADVANCED
|
---|
[504] | 126 | jz SHORT NoIdeDeviceFound
|
---|
[567] | 127 | jpo SHORT .SkipXTCF ; Only 1 bit set means no MODULE_8BIT_IDE_ADVANCED
|
---|
[497] | 128 |
|
---|
[502] | 129 | ; *** Try to detect XT-CF ***
|
---|
[504] | 130 | mov si, dx
|
---|
| 131 | add si, BYTE XTCF_CONTROL_BLOCK_OFFSET
|
---|
| 132 | shl bx, 1 ; SHL 1 register offsets for XT-CF
|
---|
| 133 | call DetectIdeDeviceFromPortsDXandSIwithOffsetsInBLandBH
|
---|
[497] | 134 | mov al, DEVICE_8BIT_XTCF_PIO8
|
---|
| 135 | jnc SHORT .IdeDeviceFound
|
---|
[567] | 136 | shr bx, 1
|
---|
| 137 | .SkipXTCF:
|
---|
[497] | 138 |
|
---|
[502] | 139 | ; *** Try to detect 8-bit XT-IDE rev 1 or rev 2 ***
|
---|
[498] | 140 | ; Note that A0<->A3 address swaps Status Register and Alternative
|
---|
| 141 | ; Status Register addresses. That is why we need another step
|
---|
| 142 | ; to check is this XT-IDE rev 1 or rev 2.
|
---|
[567] | 143 | mov si, dx
|
---|
| 144 | add si, BYTE XTIDE_CONTROL_BLOCK_OFFSET
|
---|
[504] | 145 | call DetectIdeDeviceFromPortsDXandSIwithOffsetsInBLandBH
|
---|
| 146 | jc SHORT NoIdeDeviceFound ; No XT-IDE rev 1 or rev 2 found
|
---|
[497] | 147 |
|
---|
[498] | 148 | ; Now we can be sure that we have XT-IDE rev 1 or rev 2.
|
---|
| 149 | ; Rev 2 swaps address lines A0 and A3 thus LBA Low Register
|
---|
| 150 | ; moves from offset 3h to offset Ah. There is no Register at
|
---|
| 151 | ; offset Ah so if we can write to it and read back, then we
|
---|
| 152 | ; must have XT-IDE rev 2 or modded rev 1.
|
---|
| 153 | push dx
|
---|
| 154 | add dx, BYTE 0Ah ; LBA Low Register for XT-IDE rev 2
|
---|
| 155 | mov al, DEVICE_8BIT_XTIDE_REV2 ; Our test byte
|
---|
| 156 | out dx, al ; Output our test byte
|
---|
| 157 | JMP_DELAY
|
---|
| 158 | in al, dx ; Read back
|
---|
| 159 | pop dx
|
---|
| 160 | cmp al, DEVICE_8BIT_XTIDE_REV2
|
---|
| 161 | je SHORT .IdeDeviceFound
|
---|
| 162 | mov al, DEVICE_8BIT_XTIDE_REV1 ; We must have rev 1
|
---|
[497] | 163 | .IdeDeviceFound:
|
---|
[518] | 164 | clc
|
---|
[497] | 165 | ret
|
---|
| 166 |
|
---|
| 167 |
|
---|
| 168 | ;--------------------------------------------------------------------
|
---|
[504] | 169 | ; DetectIdeDeviceFromPortsDXandSIwithOffsetsInBLandBH
|
---|
[497] | 170 | ; Parameters:
|
---|
| 171 | ; BL: Offset to IDE Status Register
|
---|
[504] | 172 | ; BH: Offset to Alternative Status Register
|
---|
| 173 | ; DX: IDE Base Port address
|
---|
| 174 | ; SI: IDE Control Block address
|
---|
[497] | 175 | ; Returns:
|
---|
| 176 | ; CF: Clear if IDE Device found
|
---|
| 177 | ; Set if IDE Device not found
|
---|
| 178 | ; Corrupts registers:
|
---|
| 179 | ; AX
|
---|
| 180 | ;--------------------------------------------------------------------
|
---|
[504] | 181 | DetectIdeDeviceFromPortsDXandSIwithOffsetsInBLandBH:
|
---|
[497] | 182 | ; Read Status and Alternative Status Registers
|
---|
| 183 | push dx
|
---|
| 184 |
|
---|
[504] | 185 | add dl, bl
|
---|
[497] | 186 | cli ; Disable Interrupts
|
---|
[504] | 187 | in al, dx ; Read Status Register...
|
---|
| 188 | mov ah, al ; ...to AH
|
---|
| 189 | mov dx, si
|
---|
| 190 | add dl, bh
|
---|
| 191 | in al, dx ; Read Alternative Status Register to AL
|
---|
[497] | 192 | sti ; Enable Interrupts
|
---|
| 193 |
|
---|
| 194 | pop dx
|
---|
| 195 | ; Fall to CompareIdeStatusRegistersFromALandAH
|
---|
| 196 |
|
---|
| 197 |
|
---|
| 198 | ;--------------------------------------------------------------------
|
---|
| 199 | ; CompareIdeStatusRegistersFromALandAH
|
---|
| 200 | ; Parameters:
|
---|
[504] | 201 | ; AH: Possible IDE Status Register contents
|
---|
| 202 | ; AL: Possible IDE Alternative Status Register contents
|
---|
[497] | 203 | ; Returns:
|
---|
| 204 | ; CF: Clear if valid Status Register Contents
|
---|
| 205 | ; Set if not possible IDE Status Registers
|
---|
| 206 | ; Corrupts registers:
|
---|
| 207 | ; Nothing
|
---|
| 208 | ;--------------------------------------------------------------------
|
---|
| 209 | CompareIdeStatusRegistersFromALandAH:
|
---|
| 210 | ; Status Register now in AH and Alternative Status Register in AL.
|
---|
| 211 | ; They must be the same if base port was in use by IDE device.
|
---|
| 212 | cmp al, ah
|
---|
[518] | 213 | jne SHORT NoIdeDeviceFound
|
---|
[497] | 214 |
|
---|
[505] | 215 | ; Bytes were the same but it is possible they were both FFh, for
|
---|
[502] | 216 | ; example. We must make sure bits are what is expected from valid
|
---|
| 217 | ; IDE Status Register. So far all drives I've tested return 50h
|
---|
[518] | 218 | ; (FLG_STATUS_DRDY and FLG_STATUS_DSC set) or 00h.
|
---|
| 219 | ; I suspect that the zero might mean non available drive is selected. For example if Master
|
---|
[504] | 220 | ; drive is present but Slave is selected from IDE Drive and Head Select Register,
|
---|
[518] | 221 | ; then the Status Register can be 00h. We cannot accept 00h as valid byte
|
---|
| 222 | ; since that can easily cause invalid JR-IDE/ISA detections.
|
---|
[497] | 223 | test al, FLG_STATUS_BSY | FLG_STATUS_DF | FLG_STATUS_DRQ | FLG_STATUS_ERR
|
---|
[519] | 224 | jnz SHORT NoIdeDeviceFound ; Busy or Errors cannot be set
|
---|
[497] | 225 | test al, FLG_STATUS_DRDY
|
---|
[519] | 226 | jz SHORT NoIdeDeviceFound ; Device needs to be ready
|
---|
[567] | 227 | ret ; Return with CF cleared
|
---|
[497] | 228 |
|
---|
[504] | 229 | NoIdeDeviceFound:
|
---|
[497] | 230 | stc
|
---|
| 231 | ret
|
---|
| 232 |
|
---|
| 233 |
|
---|
| 234 | ;--------------------------------------------------------------------
|
---|
[504] | 235 | ; ChangeDifferentControlBlockAddressToSI
|
---|
| 236 | ; Parameters:
|
---|
| 237 | ; DX: IDE Base Port address
|
---|
| 238 | ; SI: IDE Control Block address
|
---|
| 239 | ; Returns:
|
---|
| 240 | ; ZF: Set if SI changed
|
---|
| 241 | ; Cleared if different control block address is not possible
|
---|
| 242 | ; Corrupts registers:
|
---|
| 243 | ; AH
|
---|
| 244 | ;--------------------------------------------------------------------
|
---|
| 245 | ChangeDifferentControlBlockAddressToSI:
|
---|
| 246 | cmp si, 368h
|
---|
| 247 | je SHORT .TrySecondAlternative
|
---|
| 248 | cmp si, 3E8h
|
---|
| 249 | je SHORT .TrySecondAlternative
|
---|
| 250 |
|
---|
| 251 | cmp si, 360h
|
---|
| 252 | je SHORT .TryLastAlternative
|
---|
| 253 | cmp si, 3E0h
|
---|
| 254 | je SHORT .TryLastAlternative
|
---|
| 255 | ret ; Return with ZF cleared
|
---|
| 256 |
|
---|
| 257 | .TryLastAlternative:
|
---|
| 258 | mov si, DEVICE_ATA_SECONDARY_PORTCTRL + 8 ; Changes to 370h used by Sound Blaster 16 (CT2290)
|
---|
| 259 | ; Fall to .TrySecondAlternative
|
---|
| 260 | .TrySecondAlternative:
|
---|
| 261 | sub si, BYTE 8h ; 368h to 360h, 3E8h to 3E0h
|
---|
| 262 | xor ah, ah ; Set ZF
|
---|
| 263 | ret
|
---|
| 264 |
|
---|
| 265 |
|
---|
| 266 | ;--------------------------------------------------------------------
|
---|
[497] | 267 | ; IdeAutodetect_IncrementDXtoNextIdeBasePort
|
---|
| 268 | ; Parameters:
|
---|
[518] | 269 | ; DX: Previous IDE Base Port or IDE_PORT_TO_START_DETECTION
|
---|
[497] | 270 | ; Returns:
|
---|
| 271 | ; DX: Next IDE Base Port
|
---|
| 272 | ; ZF: Set if no more Base Ports (DX was last base port on entry)
|
---|
| 273 | ; Clear if new base port returned in DX
|
---|
| 274 | ; Corrupts registers:
|
---|
| 275 | ; AX
|
---|
| 276 | ;--------------------------------------------------------------------
|
---|
| 277 | ALIGN JUMP_ALIGN
|
---|
| 278 | IdeAutodetect_IncrementDXtoNextIdeBasePort:
|
---|
| 279 | cmp dx, [cs:.wLastIdePort]
|
---|
| 280 | je SHORT .AllPortsAlreadyDetected
|
---|
| 281 |
|
---|
| 282 | push si
|
---|
| 283 | mov si, .rgwIdeBasePorts
|
---|
| 284 | .CompareNextIdeBasePort:
|
---|
| 285 | cmp [cs:si], dx
|
---|
| 286 | lea si, [si+2] ; Increment SI and preserve FLAGS
|
---|
| 287 | jne SHORT .CompareNextIdeBasePort
|
---|
| 288 |
|
---|
| 289 | mov dx, [cs:si] ; Get next port
|
---|
| 290 | test dx, dx ; Clear ZF
|
---|
| 291 | pop si
|
---|
| 292 | .AllPortsAlreadyDetected:
|
---|
| 293 | ret
|
---|
| 294 |
|
---|
| 295 |
|
---|
| 296 | ; All ports used in autodetection. Ports can be in any order.
|
---|
| 297 | ALIGN WORD_ALIGN
|
---|
| 298 | .rgwIdeBasePorts:
|
---|
| 299 | dw IDE_PORT_TO_START_DETECTION ; Must be first
|
---|
[498] | 300 | ; Standard IDE
|
---|
| 301 | dw DEVICE_ATA_PRIMARY_PORT
|
---|
| 302 | dw DEVICE_ATA_SECONDARY_PORT
|
---|
| 303 | dw DEVICE_ATA_TERTIARY_PORT
|
---|
| 304 | dw DEVICE_ATA_QUATERNARY_PORT
|
---|
[497] | 305 | ; 8-bit Devices
|
---|
| 306 | dw 200h
|
---|
| 307 | dw 220h
|
---|
| 308 | dw 240h
|
---|
| 309 | dw 260h
|
---|
| 310 | dw 280h
|
---|
| 311 | dw 2A0h
|
---|
| 312 | dw 2C0h
|
---|
| 313 | dw 2E0h
|
---|
| 314 | dw 300h
|
---|
| 315 | dw 320h
|
---|
| 316 | dw 340h
|
---|
| 317 | dw 360h
|
---|
| 318 | dw 380h
|
---|
| 319 | dw 3A0h
|
---|
| 320 | dw 3C0h
|
---|
| 321 | dw 3E0h
|
---|
[567] | 322 | ; Memory Segment Addresses
|
---|
| 323 | dw 0C000h ; JR-IDE/ISA
|
---|
| 324 | dw 0C400h ; JR-IDE/ISA
|
---|
| 325 | dw 0C800h ; JR-IDE/ISA and ADP50L
|
---|
| 326 | dw 0CA00h ; ADP50L
|
---|
| 327 | dw 0CC00h ; JR-IDE/ISA and ADP50L
|
---|
| 328 | dw 0CE00h ; ADP50L
|
---|
| 329 | dw 0D000h ; JR-IDE/ISA
|
---|
| 330 | dw 0D400h ; JR-IDE/ISA
|
---|
| 331 | dw 0D800h ; JR-IDE/ISA
|
---|
[497] | 332 | .wLastIdePort:
|
---|
[567] | 333 | dw 0DC00h ; JR-IDE/ISA
|
---|