source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS_Configurator_v2/Src/EEPROM.asm@ 591

Last change on this file since 591 was 589, checked in by Krister Nordvall, 8 years ago

Changes:

  • BIOS: Fixed a purely cosmetic bug from r542 where, in builds containing MODULE_EBIOS, the boot menu would display an incorrect drive size (0.4 kB with MODULE_STRINGS_COMPRESSED or 0.5 kB without) for old drives with no support for LBA.
  • Fixed a bug from r392 where Vision_DetectAndReturnIDinAXandPortInDXifControllerPresent would return the ID in AL instead of AH (if DANGEROUS_DETECTION had been defined).
  • Fixed a bug from r587 in AdvAtaInit.asm that would prevent detection of QDI Vision controllers.
  • Also changed how the QDI Vision IDs are defined (removed the need for shifting) to avoid confusion. This fixed a potential bug from r587 in AdvAtaInit.asm where some IDs were not being shifted.
  • Fixed a bug in PDC20x30.asm from r587 where GetPdcIDtoAX would not return with the IDE base port in DX so DisablePdcProgrammingMode would fail.
  • Made some changes to ModuleDependency.inc and other files so that MODULE_ADVANCED_ATA now requires USE_386. Consequently it is no longer included in the regular AT-builds, only in the 386_8k-build.
  • Moved the UNROLL_SECTORS_IN_CX_TO_xWORDS macros from IDE_8bit.inc to IdeIO.inc which means it's now possible to build a BIOS without MODULE_8BIT_IDE.
  • XTIDECFG: Added a minimum DOS version check (since it needs DOS version 2+) to allow the program to quit gracefully in the unlikely scenario where someone tries to run it under DOS version 1.
  • Made some changes to Drive.asm to improve drive enumeration. The old method using GET_DOS_DRIVE_PARAMETER_BLOCK_FOR_SPECIFIC_DRIVE worked well in Windows XP but not in Windows 98 SE (in Windows or in DOS mode). The two problems were; 1) The function call would access the drives which on single floppy drive systems would cause Windows to swap between A: and B: (throwing a blue screen asking the user to insert a disk etc). 2) Only floppy drives and FAT16 drives would be available in the list of drives, no FAT32/optical/network drives.
  • Improved code in IdeControllerMenu.asm so that the default port addresses for all IDE interfaces are now restored when (re-)selecting the (same) type of IDE device.
  • Also made it impossible to select a device type unless the required module is included in the loaded BIOS.
  • The version check done when loading a BIOS now uses the FLASH_SIGNATURE definition from Version.inc. Any changes affecting RomVars now only requires updating that definition. This means that changes to RomVars must be implemented in both the BIOS and XTIDECFG before being committed to the repository.
  • Added a compatibility fix for 3Com 3C503 cards to the ROM checksumming code in Buffers.asm (Buffers_GenerateChecksum).
  • SerDrive: Made some minor changes to file names and paths to improve compatibility with case sensitive environments.
  • BIOSDRVS: Made a minor size optimization which as a side effect also makes it compatible with all DOS versions including DOS version 1.
  • Library: Renamed the WAIT_RETRACE_IF_NECESSARY_THEN macro to CALL_WAIT_FOR_RETRACE_IF_NECESSARY_THEN and made a tail-call-optimized version of it (JMP_WAIT_FOR_RETRACE_IF_NECESSARY_THEN).
  • A speed optimization to the eRCL_IM macro for 386 and higher. This change breaks emulation in the sense that the macro will fail when given a memory operand as the first parameter.
  • Other minor optimizations and fixes.
File size: 5.3 KB
RevLine 
[57]1; Project name : XTIDE Univeral BIOS Configurator v2
2; Description : Functions for managing EEPROM contents.
3
[376]4;
[526]5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
[376]7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
[526]12;
[376]13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
[526]16; GNU General Public License for more details.
[376]17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
[526]18;
[376]19
[65]20; Section containing initialized data
21SECTION .data
22
23ALIGN WORD_ALIGN
24g_rgwEepromTypeToSizeInWords:
25 dw (2<<10) / 2 ; EEPROM_TYPE.2816_2kiB
26 dw (8<<10) / 2
[159]27 dw (8<<10) / 2 ; EEPROM_TYPE.2864_8kiB_MOD
[65]28 dw (32<<10) / 2
29 dw (64<<10) / 2
30
31g_rgwEepromPageToSizeInBytes:
32 dw 1 ; EEPROM_PAGE.1_byte
33 dw 2
34 dw 4
35 dw 8
36 dw 16
37 dw 32
38 dw 64
39
40
41
[57]42; Section containing code
43SECTION .text
44
45;--------------------------------------------------------------------
[68]46; EEPROM_LoadXtideUniversalBiosFromRomToRamBufferAndReturnSizeInDXCX
[57]47; Parameters:
48; Nothing
49; Returns:
[68]50; DX:CX: BIOS size in bytes
[57]51; Corrupts registers:
52; AX, BX, SI, DI
53;--------------------------------------------------------------------
54ALIGN JUMP_ALIGN
[68]55EEPROM_LoadXtideUniversalBiosFromRomToRamBufferAndReturnSizeInDXCX:
[57]56 push es
57
58 call EEPROM_FindXtideUniversalBiosROMtoESDI
[484]59 call EEPROM_GetXtideUniversalBiosSizeFromESDItoDXCX
[57]60 xor si, si ; Load from beginning of ROM
61 call LoadBytesFromRomToRamBuffer
62
[484]63 call EEPROM_GetXtideUniversalBiosSizeFromESDItoDXCX
[57]64 pop es
65 ret
66
[484]67
[57]68;--------------------------------------------------------------------
[484]69; EEPROM_GetXtideUniversalBiosSizeFromESDItoDXCX
[57]70; Parameters:
[484]71; ES:DI: Ptr to XTIDE Universal BIOS
[57]72; Returns:
[68]73; DX:CX: Bios size in bytes
[57]74; Corrupts registers:
[68]75; Nothing
[57]76;--------------------------------------------------------------------
77ALIGN JUMP_ALIGN
[484]78EEPROM_GetXtideUniversalBiosSizeFromESDItoDXCX:
[68]79 xor dx, dx
[558]80 mov ch, [es:di+ROMVARS.bRomSize]
81 mov cl, dl
82 eSHL_IM ch, 1
[589]83 eRCL_IM dl, 1
[57]84 ret
85
86
87;--------------------------------------------------------------------
88; EEPROM_LoadOldSettingsFromRomToRamBuffer
89; Parameters:
90; Nothing
91; Returns:
92; CF: Set if EEPROM was found
93; Cleared if EEPROM not found
94; Corrupts registers:
95; AX, BX, CX, SI, DI
96;--------------------------------------------------------------------
97ALIGN JUMP_ALIGN
98EEPROM_LoadOldSettingsFromRomToRamBuffer:
99 mov cx, ROMVARS_size - ROMVARS.wFlags ; Number of bytes to load
100 mov si, ROMVARS.wFlags ; Offset where to start loading
101 ; Fall to LoadBytesFromRomToRamBuffer
102
103;--------------------------------------------------------------------
104; LoadBytesFromRomToRamBuffer
105; Parameters:
106; CX: Number of bytes to load from ROM
107; SI: Offset to first byte to load
108; Returns:
109; CF: Set if EEPROM was found
110; Cleared if EEPROM not found
111; Corrupts registers:
[523]112; AX, BX, CX, SI
[57]113;--------------------------------------------------------------------
114ALIGN JUMP_ALIGN
115LoadBytesFromRomToRamBuffer:
116 push es
117 push ds
[523]118 push di
[57]119
120 call EEPROM_FindXtideUniversalBiosROMtoESDI
121 jnc SHORT .XtideUniversalBiosNotFound
122 push es
123 pop ds ; DS:SI points to ROM
124
125 call Buffers_GetFileBufferToESDI
126 mov di, si ; ES:DI points to RAM buffer
127
128 cld
129 call Memory_CopyCXbytesFromDSSItoESDI
130 stc
131
132.XtideUniversalBiosNotFound:
[523]133 pop di
[57]134 pop ds
135 pop es
136 ret
137
138
139;--------------------------------------------------------------------
140; EEPROM_FindXtideUniversalBiosROMtoESDI
141; Parameters:
142; Nothing
143; Returns:
144; ES:DI: EEPROM segment
145; CF: Set if EEPROM was found
146; Cleared if EEPROM not found
147; Corrupts registers:
148; AX, BX
149;--------------------------------------------------------------------
150ALIGN JUMP_ALIGN
151EEPROM_FindXtideUniversalBiosROMtoESDI:
152 push si
153 push cx
154
155 xor di, di ; Zero DI (offset)
156 mov bx, 0C000h ; First possible ROM segment
157ALIGN JUMP_ALIGN
158.SegmentLoop:
159 mov es, bx ; Possible ROM segment to ES
160 call Buffers_IsXtideUniversalBiosSignatureInESDI
161 je SHORT .RomFound
[568]162 add bx, 80h ; Increment by 2kB (minimum possible distance from the beginning of one option ROM to the next)
[57]163 jnc SHORT .SegmentLoop ; Loop until segment overflows
164 clc
165 jmp SHORT .ReturnWithoutUpdatingCF
166ALIGN JUMP_ALIGN
167.RomFound:
168 stc
169.ReturnWithoutUpdatingCF:
170 pop cx
171 pop si
172 ret
173
174
175;--------------------------------------------------------------------
[65]176; EEPROM_LoadFromRomToRamComparisonBuffer
[57]177; Parameters:
178; Nothing
179; Returns:
[65]180; Nothing
[57]181; Corrupts registers:
[65]182; BX, CX, SI, DI
[57]183;--------------------------------------------------------------------
184ALIGN JUMP_ALIGN
[65]185EEPROM_LoadFromRomToRamComparisonBuffer:
186 push es
187 push ds
188
189 mov ds, [cs:g_cfgVars+CFGVARS.wEepromSegment]
190 xor si, si
191 call Buffers_GetFlashComparisonBufferToESDI
[293]192 eMOVZX bx, [cs:g_cfgVars+CFGVARS.bEepromType]
[65]193 mov cx, [cs:bx+g_rgwEepromTypeToSizeInWords]
194 cld
195 rep movsw
196
197 pop ds
198 pop es
[57]199 ret
Note: See TracBrowser for help on using the repository browser.