source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 630

Last change on this file since 630 was 630, checked in by Krister Nordvall, 8 days ago

Changes:

  • Changed the g_szPCFlashSuccessful string in XTIDECFG to reflect the reality - it turns out ANY key was limited to just ENTER or ESC.
  • Removed the NEC V-specific optimization I added in r602 because NEC's documentation completely fails to mention that the ROL4 instruction also changes the high nibble of AL. Huge thanks to vcfed-member dreNorteR for discovering this and also for suggesting an optimization to the physical address conversion code in IdeTransfer.asm.
  • Made some changes to the OUTPUT_AL_TO_IDE_REGISTER and OUTPUT_AL_TO_IDE_CONTROL_BLOCK_REGISTER macros as an optimization. This saves 15+12 bytes in builds without MODULE_8BIT_IDE (e.g. the PS/2 builds).
  • Other minor optimizations and cleanups.
File size: 17.1 KB
Line 
1####################################################################################################
2# Makefile to build XTIDE Universal BIOS. #
3# #
4# Valid makefile targets are: #
5# all Removes existing files and builds binary files in \Build (without checksums) #
6# small Builds only binaries smaller than or equal to 8 kiB (without checksums) #
7# large Builds only binaries larger than 8 kiB (without checksums) #
8# custom Builds custom binary without checksum (change DEFINES_CUSTOM / BIOS_SIZE_CUSTOM first) #
9# clean Removes all files from \Build #
10# checksum* Same as 'all' but also applies checksums to the binaries #
11# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
12# unused* Checks if there are any unused functions that can be removed to save space #
13# #
14# * at the end of target name means that Perl is required for the job. #
15# Build directory must be created manually if it does not exist. #
16# #
17# #
18# Following modules can be included or excluded: #
19# MODULE_8BIT_IDE Support for 8-BIT IDE cards like XTIDE #
20# MODULE_8BIT_IDE_ADVANCED Support for memory mapped and DMA based cards like JRIDE and XTCF #
21# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers (requires USE_386) #
22# MODULE_COMPATIBLE_TABLES Support for ill behaving software that tries to access DPT directly #
23# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
24# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
25# MODULE_HOTKEYS Hotkey Bar to boot from any drive #
26# MODULE_IRQ IDE IRQ support #
27# MODULE_SERIAL Virtual hard disks using serial port #
28# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
29# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
30# MODULE_VERY_LATE_INIT Initialize on INT 13h if our INT 19h handler is not called #
31# MODULE_POWER_MANAGEMENT Power Management support #
32# MODULE_WIN9X_CMOS_HACK Hack for Windows 9x compatibility #
33# MODULE_MFM_COMPATIBILITY Restores BDA drive count for MFM/SCSI controllers that expect to be #
34# the only hard drive controller in the system #
35# #
36# Not modules but these affect the assembly: #
37# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
38# RELOCATE_INT13H_STACK ** Relocates INT 13h stack to beginning of stolen conventional memory #
39# NO_ATAID_VALIDATION *** Excludes code that tries to ensure proper communication with drives #
40# NO_ATAID_CORRECTION Excludes code that corrects illegal CHS values from some CF cards #
41# USE_086 Applies WORD alignment padding for use with 8086/V30 CPUs only #
42# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
43# USE_286 Use instructions supported by 286 and later (defines USE_UNDOC_INTEL)#
44# USE_386 Use instructions supported by 386 and later (defines USE_286) #
45# USE_AT Use features supported on AT and later systems (not available on XT) #
46# USE_PS2 For use with 286+ IBM PS/2 machines only (defines USE_AT) #
47# USE_UNDOC_INTEL Optimizations for Intel CPUs - do NOT use on NEC V20/V30/Sony CPUs #
48# USE_NEC_V Optimizations for use with NEC V20/V30 CPUs only #
49# CLD_NEEDED Only needed for compatibility with buggy software/BIOSes #
50# EXTRA_LOOP_UNROLLING_SMALL Improves transfer speed on some CPU + IDE controller combinations #
51# EXTRA_LOOP_UNROLLING_LARGE Same as above but faster and uses more ROM space #
52# #
53# ** AT Builds only (when USE_AT is defined) #
54# *** Use this only when certain known good drives are not being detected (eg WD Caviars) #
55####################################################################################################
56
57###########################################
58# Source files and destination executable #
59###########################################
60
61# Assembly source code file (*.asm):
62SRC_ASM = Src/Main.asm
63
64# Program executable file name without extension:
65PROG = ide
66
67
68#######################################
69# Destination and include directories #
70#######################################
71
72# Directory where binary file will be compiled to
73BUILD_DIR = Build
74
75# Subdirectories where included files are:
76HEADERS = Inc/
77HEADERS += Inc/Controllers/
78HEADERS += Src/
79HEADERS += Src/Handlers/
80HEADERS += Src/Handlers/Int13h/
81HEADERS += Src/Handlers/Int13h/EBIOS/
82HEADERS += Src/Handlers/Int13h/Tools/
83HEADERS += Src/Handlers/Int19h/
84HEADERS += Src/Device/
85HEADERS += Src/Device/IDE/
86HEADERS += Src/Device/MemoryMappedIDE/
87HEADERS += Src/Device/Serial/
88HEADERS += Src/Initialization/
89HEADERS += Src/Initialization/AdvancedAta/
90HEADERS += Src/Menus/
91HEADERS += Src/Menus/BootMenu/
92HEADERS += Src/Libraries/
93HEADERS += Src/VariablesAndDPTs/
94
95# Subdirectories where library files are:
96LIBS = ../Assembly_Library/Inc/
97LIBS += ../Assembly_Library/Src/
98LIBS += ../Assembly_Library/Src/Display/
99LIBS += ../Assembly_Library/Src/File/
100LIBS += ../Assembly_Library/Src/Keyboard/
101LIBS += ../Assembly_Library/Src/Menu/
102LIBS += ../Assembly_Library/Src/Menu/Dialog/
103LIBS += ../Assembly_Library/Src/String/
104LIBS += ../Assembly_Library/Src/Time/
105LIBS += ../Assembly_Library/Src/Util/
106LIBS += ../Assembly_Library/Src/Serial/
107LIBS += ../XTIDE_Universal_BIOS/Inc/
108HEADERS += $(LIBS)
109
110
111##################################
112# Assembler preprocessor defines #
113##################################
114DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_EBIOS MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_POWER_MANAGEMENT NO_ATAID_VALIDATION CLD_NEEDED EXTRA_LOOP_UNROLLING_SMALL
115DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE_ADVANCED MODULE_COMPATIBLE_TABLES EXTRA_LOOP_UNROLLING_LARGE
116
117DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE_ADVANCED
118DEFINES_XTPLUS = $(DEFINES_XT) USE_186
119DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 MODULE_IRQ MODULE_COMPATIBLE_TABLES
120DEFINES_386 = $(DEFINES_AT) USE_386 MODULE_ADVANCED_ATA MODULE_WIN9X_CMOS_HACK
121DEFINES_PS2 = USE_PS2 USE_286 MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_BOOT_MENU MODULE_EBIOS MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_IRQ MODULE_POWER_MANAGEMENT NO_ATAID_VALIDATION CLD_NEEDED
122
123DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE)
124DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE)
125DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
126DEFINES_386_LARGE = $(DEFINES_386) $(DEFINES_COMMON_LARGE)
127DEFINES_PS2_LARGE = $(DEFINES_PS2) MODULE_COMPATIBLE_TABLES
128
129DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE NO_ATAID_VALIDATION NO_ATAID_CORRECTION CLD_NEEDED
130
131DEFINES_CUSTOM = ?
132
133
134###################
135# Other variables #
136###################
137
138# Target size of the BIOS, used in Main.asm for number of 512B blocks (CNT_ROM_BLOCKS) and by checksum Perl script below ('make checksum').
139# Note! The size must be a multiple of 2 KB for compatibility reasons.
140BIOS_SIZE_TINY = 4096
141BIOS_SIZE_SMALL = 8192
142BIOS_SIZE_LARGE = 12288
143BIOS_SIZE_CUSTOM = ?
144
145# Add -D in front of every preprocessor define declaration
146DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
147DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
148DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
149DEFS_386 = $(DEFINES_386:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
150DEFS_PS2 = $(DEFINES_PS2:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
151DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
152DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
153DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
154DEFS_386_LARGE = $(DEFINES_386_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
155DEFS_PS2_LARGE = $(DEFINES_PS2_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
156DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_TINY)
157DEFS_CUSTOM = $(DEFINES_CUSTOM:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_CUSTOM)
158
159# Add -I in front of all header directories
160IHEADERS = $(HEADERS:%=-I%)
161
162# Path + target file to be built
163TARGET = $(BUILD_DIR)/$(PROG)
164
165
166#########################
167# Compilers and linkers #
168#########################
169
170# Make
171MAKE = mingw32-make.exe
172
173# Assembler
174AS = nasm.exe
175
176# use this command to erase files.
177RM = -del /Q
178
179
180#############################
181# Compiler and linker flags #
182#############################
183
184# Assembly compiler flags
185ASFLAGS = -f bin # Produce binary object files
186ASFLAGS += $(IHEADERS) # Set header file directory paths
187ASFLAGS += -Worphan-labels # Warn about labels without colon
188ASFLAGS += -Ox # Optimize operands to their shortest forms
189
190
191############################################
192# Build process. Actual work is done here. #
193############################################
194
195all: clean small large
196 @echo All done!
197
198small: xt_tiny xt xtplus at 386 ps2
199 @echo All small binaries built!
200
201large: xt_large xtplus_large at_large 386_large ps2_large
202 @echo All large binaries built!
203
204ps2:
205 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_PS2) -l"$(TARGET)_ps2.lst" -o"$(TARGET)_ps2.bin"
206 @echo * Small PS/2 version "$(TARGET)_ps2.bin" built.
207
208ps2_large:
209 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_PS2_LARGE) -l"$(TARGET)_ps2l.lst" -o"$(TARGET)_ps2l.bin"
210 @echo * Large PS/2 version "$(TARGET)_ps2l.bin" built.
211
212386:
213 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
214 @echo * Small 386 version "$(TARGET)_386.bin" built.
215
216386_large:
217 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -l"$(TARGET)_386l.lst" -o"$(TARGET)_386l.bin"
218 @echo * Large 386 version "$(TARGET)_386l.bin" built.
219
220at:
221 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
222 @echo * Small AT version "$(TARGET)_at.bin" built.
223
224at_large:
225 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
226 @echo * Large AT version "$(TARGET)_atl.bin" built.
227
228xtplus:
229 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
230 @echo * Small XT Plus version "$(TARGET)_xtp.bin" built.
231
232xtplus_large:
233 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
234 @echo * Large XT Plus version "$(TARGET)_xtpl.bin" built.
235
236xt:
237 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
238 @echo * Small XT version "$(TARGET)_xt.bin" built.
239
240xt_large:
241 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
242 @echo * Large XT version "$(TARGET)_xtl.bin" built.
243
244xt_tiny:
245 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin"
246 @echo * Tiny XT version "$(TARGET)_tiny.bin" built.
247
248custom:
249 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_CUSTOM) -l"$(TARGET)_cstm.lst" -o"$(TARGET)_cstm.bin"
250 @echo * Custom version "$(TARGET)_cstm.bin" built.
251
252strings: src\Strings.asm
253 @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
254 @perl ..\Tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
255 @echo StringsCompressed.asm updated!
256
257clean:
258 @$(RM) $(BUILD_DIR)\*.*
259 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
260
261checksum: all
262 @perl ..\Tools\checksum.pl $(TARGET)_tiny.bin $(BIOS_SIZE_TINY)
263 @perl ..\Tools\checksum.pl $(TARGET)_xt.bin $(BIOS_SIZE_SMALL)
264 @perl ..\Tools\checksum.pl $(TARGET)_xtp.bin $(BIOS_SIZE_SMALL)
265 @perl ..\Tools\checksum.pl $(TARGET)_at.bin $(BIOS_SIZE_SMALL)
266 @perl ..\Tools\checksum.pl $(TARGET)_386.bin $(BIOS_SIZE_SMALL)
267 @perl ..\Tools\checksum.pl $(TARGET)_ps2.bin $(BIOS_SIZE_SMALL)
268 @perl ..\Tools\checksum.pl $(TARGET)_xtl.bin $(BIOS_SIZE_LARGE)
269 @perl ..\Tools\checksum.pl $(TARGET)_xtpl.bin $(BIOS_SIZE_LARGE)
270 @perl ..\Tools\checksum.pl $(TARGET)_atl.bin $(BIOS_SIZE_LARGE)
271 @perl ..\Tools\checksum.pl $(TARGET)_386l.bin $(BIOS_SIZE_LARGE)
272 @perl ..\Tools\checksum.pl $(TARGET)_ps2l.bin $(BIOS_SIZE_LARGE)
273
274unused:
275 @echo "XT Tiny"
276 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -o"$(TARGET)_unused_tiny.asm" -l"$(TARGET)_unused_tiny.lst"
277 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -o"$(TARGET)_unused_tiny.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
278 @perl ..\Tools\unused.pl $(TARGET)_unused_tiny.lst $(TARGET)_unused_tiny.asm
279 @echo "XT Small"
280 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst"
281 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
282 @perl ..\Tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm
283 @echo "XT Large"
284 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst"
285 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
286 @perl ..\Tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm
287 @echo "XT Plus Small"
288 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -o"$(TARGET)_unused_xtp.asm" -l"$(TARGET)_unused_xtp.lst"
289 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -o"$(TARGET)_unused_xtp.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
290 @perl ..\Tools\unused.pl $(TARGET)_unused_xtp.lst $(TARGET)_unused_xtp.asm
291 @echo "XT Plus Large"
292 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -o"$(TARGET)_unused_xtpl.asm" -l"$(TARGET)_unused_xtpl.lst"
293 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -o"$(TARGET)_unused_xtpl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
294 @perl ..\Tools\unused.pl $(TARGET)_unused_xtpl.lst $(TARGET)_unused_xtpl.asm
295 @echo "AT Small"
296 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst"
297 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
298 @perl ..\Tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm
299 @echo "AT Large"
300 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst"
301 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
302 @perl ..\Tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm
303 @echo "386 Small"
304 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -o"$(TARGET)_unused_386.asm" -l"$(TARGET)_unused_386.lst"
305 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -o"$(TARGET)_unused_386.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
306 @perl ..\Tools\unused.pl $(TARGET)_unused_386.lst $(TARGET)_unused_386.asm
307 @echo "386 Large"
308 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -o"$(TARGET)_unused_386l.asm" -l"$(TARGET)_unused_386l.lst"
309 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -o"$(TARGET)_unused_386l.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
310 @perl ..\Tools\unused.pl $(TARGET)_unused_386l.lst $(TARGET)_unused_386l.asm
311 @echo "PS/2 Small"
312 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_PS2) -o"$(TARGET)_unused_ps2.asm" -l"$(TARGET)_unused_ps2.lst"
313 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_PS2) -o"$(TARGET)_unused_ps2.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
314 @perl ..\Tools\unused.pl $(TARGET)_unused_ps2.lst $(TARGET)_unused_ps2.asm
315 @echo "PS/2 Large"
316 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_PS2_LARGE) -o"$(TARGET)_unused_ps2l.asm" -l"$(TARGET)_unused_ps2l.lst"
317 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_PS2_LARGE) -o"$(TARGET)_unused_ps2l.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
318 @perl ..\Tools\unused.pl $(TARGET)_unused_ps2l.lst $(TARGET)_unused_ps2l.asm
319
Note: See TracBrowser for help on using the repository browser.