source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 582

Last change on this file since 582 was 580, checked in by krille_n_@…, 10 years ago

Changes:

  • XTIDECFG: Fixed a bug from r459 where the menu option for selection of default boot drive would be missing if the BIOS had been built without MODULE_HOTKEYS. The menu option is now visible if either or both of MODULE_HOTKEYS and MODULE_BOOT_MENU is available.
  • BIOS: Disabled ATA-ID validation by adding a new define (NO_ATAID_VALIDATION) and making it the default for all builds since at least two WD Caviar drive models are incompatible with it.
  • Fixed the "No Fixed Disk Present in FDISK"-bug introduced in r551 which means the Tiny build now works without including MODULE_DRIVEXLATE.
  • Fixed a bug from r528 where pressing hotkey F6 would not initiate detection of serial drives.
  • Fixed a bug from r186 in DisplayFormatCompressed.asm where the boot menu would print the IRQ in hexadecimal format when it should be in decimal format.
  • Optimizations and fixes.
File size: 13.4 KB
Line 
1####################################################################################################
2# Makefile to build XTIDE Universal BIOS. #
3# #
4# Valid makefile targets are: #
5# all Removes existing files and builds binary files in \Build #
6# small Builds 8 kiB binaries only (without checksum) #
7# large Builds 12 kiB binaries only (without checksum) #
8# clean Removes all files from \Build #
9# checksum* Builds all and then generates checksum byte to all binary files #
10# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
11# unused* Checks if there are any unused functions that can be removed to save space #
12# #
13# * at the end of target name means that Perl is required for the job. #
14# Build directory must be created manually if it does not exist. #
15# #
16# #
17# Following modules can be included or excluded: #
18# MODULE_8BIT_IDE Support for 8-BIT IDE cards like XTIDE #
19# MODULE_8BIT_IDE_ADVANCED Support for memory mapped and DMA based cards like JRIDE and XTCF #
20# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers #
21# MODULE_COMPATIBLE_TABLES Support for ill behaving software that tries to access DPT directly #
22# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
23# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
24# MODULE_HOTKEYS Hotkey Bar to boot from any drive #
25# MODULE_IRQ IDE IRQ support #
26# MODULE_SERIAL Virtual hard disks using serial port #
27# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
28# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
29# MODULE_VERY_LATE_INIT Initialize on INT 13h if our INT 19h handler is not called #
30# MODULE_POWER_MANAGEMENT Power Management support #
31# #
32# Not modules but these affect the assembly: #
33# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
34# RELOCATE_INT13H_STACK ** Relocates INT 13h stack to beginning of stolen conventional memory #
35# RESERVE_DIAGNOSTIC_CYLINDER Reserve one L-CHS cylinder for compatibility with old BIOSes #
36# DANGEROUS_DETECTION Scans Advanced Controllers from dangerous ports like mirrored PIC #
37# NO_ATAID_VALIDATION *** Excludes code that tries to ensure proper communication with drives #
38# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
39# USE_286 Use instructions supported by 286 and later (defines USE_UNDOC_INTEL)#
40# USE_386 Use instructions supported by 386 and later (defines USE_286) #
41# USE_AT Use features supported on AT and later systems (not available on XT) #
42# USE_UNDOC_INTEL Optimizations for Intel CPU:s - do NOT use on NEC V20/V30/Sony CPU:s #
43# #
44# ** AT Builds only (when USE_AT is defined) #
45# *** Use this only when certain known good drives are not being detected (eg WD Caviars) #
46####################################################################################################
47
48###########################################
49# Source files and destination executable #
50###########################################
51
52# Assembly source code file (*.asm):
53SRC_ASM = Src/Main.asm
54
55# Program executable file name without extension:
56PROG = ide
57
58
59#######################################
60# Destination and include directories #
61#######################################
62
63# Directory where binary file will be compiled to
64BUILD_DIR = Build
65
66# Subdirectories where included files are:
67HEADERS = Inc/
68HEADERS += Inc/Controllers/
69HEADERS += Src/
70HEADERS += Src/Handlers/
71HEADERS += Src/Handlers/Int13h/
72HEADERS += Src/Handlers/Int13h/EBIOS/
73HEADERS += Src/Handlers/Int13h/Tools/
74HEADERS += Src/Handlers/Int19h/
75HEADERS += Src/Device/
76HEADERS += Src/Device/IDE/
77HEADERS += Src/Device/MemoryMappedIDE/
78HEADERS += Src/Device/Serial/
79HEADERS += Src/Initialization/
80HEADERS += Src/Initialization/AdvancedAta/
81HEADERS += Src/Menus/
82HEADERS += Src/Menus/BootMenu/
83HEADERS += Src/Libraries/
84HEADERS += Src/VariablesAndDPTs/
85
86# Subdirectories where library files are:
87LIBS = ../Assembly_Library/Inc/
88LIBS += ../Assembly_Library/Src/
89LIBS += ../Assembly_Library/Src/Display/
90LIBS += ../Assembly_Library/Src/File/
91LIBS += ../Assembly_Library/Src/Keyboard/
92LIBS += ../Assembly_Library/Src/Menu/
93LIBS += ../Assembly_Library/Src/Menu/Dialog/
94LIBS += ../Assembly_Library/Src/String/
95LIBS += ../Assembly_Library/Src/Time/
96LIBS += ../Assembly_Library/Src/Util/
97LIBS += ../Assembly_Library/Src/Serial/
98LIBS += ../XTIDE_Universal_BIOS/Inc/
99HEADERS += $(LIBS)
100
101
102#################################################################
103# Assembler preprocessor defines. #
104#################################################################
105DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_EBIOS MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_POWER_MANAGEMENT RESERVE_DIAGNOSTIC_CYLINDER NO_ATAID_VALIDATION
106DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE_ADVANCED MODULE_COMPATIBLE_TABLES
107
108DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE_ADVANCED
109DEFINES_XTPLUS = $(DEFINES_XT) USE_186
110DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 MODULE_IRQ MODULE_ADVANCED_ATA MODULE_COMPATIBLE_TABLES
111
112DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE)
113DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE)
114DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
115
116DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE NO_ATAID_VALIDATION
117DEFINES_386_8K = $(DEFINES_AT) USE_386
118
119DEFINES_ALL_FEATURES = MODULE_8BIT_IDE MODULE_8BIT_IDE_ADVANCED MODULE_ADVANCED_ATA MODULE_EBIOS MODULE_BOOT_MENU MODULE_HOTKEYS MODULE_IRQ MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_STRINGS_COMPRESSED MODULE_POWER_MANAGEMENT MODULE_COMPATIBLE_TABLES
120DEFINES_ALL_FEATURES += ELIMINATE_CGA_SNOW RELOCATE_INT13H_STACK RESERVE_DIAGNOSTIC_CYLINDER
121
122
123###################
124# Other variables #
125###################
126
127# Target size of the ROM, used in main.asm for number of 512B blocks and by checksum Perl script below
128BIOS_SIZE = 8192 # For BIOS header (use even multiplier!)
129ROMSIZE = $(BIOS_SIZE) # Size of binary to build when building with make checksum
130BIOS_SIZE_LARGE = 12288
131ROMSIZE_LARGE = $(BIOS_SIZE_LARGE)
132
133# Add -D in front of every preprocessor define declaration
134DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
135DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
136DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
137DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
138DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
139DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
140DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
141DEFS_386_8K = $(DEFINES_386_8K:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
142DEFS_ALL_FEATURES = $(DEFINES_ALL_FEATURES:%=-D%)
143
144# Add -I in front of all header directories
145IHEADERS = $(HEADERS:%=-I%)
146
147# Path + target file to be built
148TARGET = $(BUILD_DIR)/$(PROG)
149
150#########################
151# Compilers and linkers #
152#########################
153
154# Make
155MAKE = mingw32-make.exe
156
157# Assembler
158AS = nasm.exe
159
160# use this command to erase files.
161RM = -del /Q
162
163
164#############################
165# Compiler and linker flags #
166#############################
167
168# Assembly compiler flags
169ASFLAGS = -f bin # Produce binary object files
170ASFLAGS += $(IHEADERS) # Set header file directory paths
171ASFLAGS += -Worphan-labels # Warn about labels without colon
172ASFLAGS += -Ox # Optimize operands to their shortest forms
173
174
175############################################
176# Build process. Actual work is done here. #
177############################################
178
179all: clean small large
180 @echo All done!
181
182small: xt_tiny xt xtplus at 386_8k
183 @echo All small binaries built!
184
185large: xt_large xtplus_large at_large
186 @echo All large binaries built!
187
188at:
189 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
190 @echo * Small AT version "$(TARGET)_at.bin" built.
191
192at_large:
193 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
194 @echo * Large AT version "$(TARGET)_atl.bin" built.
195
196xtplus:
197 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
198 @echo * Small XT Plus version "$(TARGET)_xtp.bin" built.
199
200xtplus_large:
201 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
202 @echo * Large XT Plus version "$(TARGET)_xtpl.bin" built.
203
204xt:
205 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
206 @echo * Small XT version "$(TARGET)_xt.bin" built.
207
208xt_large:
209 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
210 @echo * Large XT version "$(TARGET)_xtl.bin" built.
211
212xt_tiny:
213 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin"
214 @echo * Tiny XT version "$(TARGET)_tiny.bin" built.
215
216386_8k:
217 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_8K) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
218 @echo * Small 386 version "$(TARGET)_386.bin" built.
219
220strings: src\Strings.asm
221 @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
222 @perl ..\tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
223 @echo StringsCompressed.asm updated!
224
225clean:
226 @$(RM) $(BUILD_DIR)\*.*
227 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
228
229checksum: all
230 @perl ..\tools\checksum.pl $(TARGET)_tiny.bin $(ROMSIZE)
231 @perl ..\tools\checksum.pl $(TARGET)_xt.bin $(ROMSIZE)
232 @perl ..\tools\checksum.pl $(TARGET)_xtp.bin $(ROMSIZE)
233 @perl ..\tools\checksum.pl $(TARGET)_at.bin $(ROMSIZE)
234 @perl ..\tools\checksum.pl $(TARGET)_xtl.bin $(ROMSIZE_LARGE)
235 @perl ..\tools\checksum.pl $(TARGET)_xtpl.bin $(ROMSIZE_LARGE)
236 @perl ..\tools\checksum.pl $(TARGET)_atl.bin $(ROMSIZE_LARGE)
237 @perl ..\tools\checksum.pl $(TARGET)_386.bin $(ROMSIZE)
238
239unused:
240 @echo "All Features"
241 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -l"$(TARGET)_unused.lst"
242 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
243 @perl ..\tools\unused.pl $(TARGET)_unused.lst $(TARGET)_unused.asm
244 @echo "XT Small"
245 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst"
246 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
247 @perl ..\tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm
248 @echo "XT Large"
249 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst"
250 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
251 @perl ..\tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm
252 @echo "AT Small"
253 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst"
254 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
255 @perl ..\tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm
256 @echo "AT Large"
257 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst"
258 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
259 @perl ..\tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm
260
261
Note: See TracBrowser for help on using the repository browser.