source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 549

Last change on this file since 549 was 545, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Integrated XT-CFv3 support by James Pearce.
  • XT-CFv2 memory mapped I/O and DMA modes are no longer supported (but PIO mode is).
File size: 13.1 KB
Line 
1####################################################################################################
2# Makefile to build XTIDE Universal BIOS. #
3# #
4# Valid makefile targets are: #
5# all Removes existing files and builds binary files in \Build #
6# small Builds 8 kiB binaries only (without checksum) #
7# large Builds 12 kiB binaries only (without checksum) #
8# clean Removes all files from \Build #
9# checksum* Builds all and then generates checksum byte to all binary files #
10# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
11# unused* Checks if there are any unused functions that can be removed to save space #
12# #
13# * at the end of target name means that Perl is required for the job. #
14# Build directory must be created manually if it does not exist. #
15# #
16# #
17# Following modules can be included or excluded: #
18# MODULE_8BIT_IDE Support for 8-BIT IDE cards like XTIDE #
19# MODULE_8BIT_IDE_ADVANCED Support for memory mapped and DMA based cards like JRIDE and XTCF #
20# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers #
21# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
22# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
23# MODULE_HOTKEYS Hotkey Bar to boot from any drive #
24# MODULE_IRQ IDE IRQ support #
25# MODULE_SERIAL Virtual hard disks using serial port #
26# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
27# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
28# MODULE_FEATURE_SETS Power Management support #
29# #
30# Not modules but these affect the assembly: #
31# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
32# RELOCATE_INT13H_STACK ** Relocates INT 13h stack to beginning of stolen conventional memory #
33# RESERVE_DIAGNOSTIC_CYLINDER Reserve one L-CHS cylinder for compatibility with old BIOSes #
34# CREATE_COMPATIBLE_DPT Presents compatible DPTs for ill behaving applications #
35# DANGEROUS_DETECTION Scans Advanced Controllers from dangerous ports like mirrored PIC #
36# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
37# USE_286 Use instructions supported by 286 and later (defines USE_UNDOC_INTEL)#
38# USE_386 Use instructions supported by 386 and later (defines USE_286) #
39# USE_AT Use features supported on AT and later systems (not available on XT) #
40# USE_UNDOC_INTEL Optimizations for Intel CPU:s - do NOT use on NEC V20/V30/Sony CPU:s #
41# #
42# ** AT Builds only (when USE_AT is defined) #
43####################################################################################################
44
45###########################################
46# Source files and destination executable #
47###########################################
48
49# Assembly source code file (*.asm):
50SRC_ASM = Src/Main.asm
51
52# Program executable file name without extension:
53PROG = ide
54
55
56#######################################
57# Destination and include directories #
58#######################################
59
60# Directory where binary file will be compiled to
61BUILD_DIR = Build
62
63# Subdirectories where included files are:
64HEADERS = Inc/
65HEADERS += Inc/Controllers/
66HEADERS += Src/
67HEADERS += Src/Handlers/
68HEADERS += Src/Handlers/Int13h/
69HEADERS += Src/Handlers/Int13h/EBIOS/
70HEADERS += Src/Handlers/Int13h/Tools/
71HEADERS += Src/Handlers/Int19h/
72HEADERS += Src/Device/
73HEADERS += Src/Device/IDE/
74HEADERS += Src/Device/MemoryMappedIDE/
75HEADERS += Src/Device/Serial/
76HEADERS += Src/Initialization/
77HEADERS += Src/Initialization/AdvancedAta/
78HEADERS += Src/Menus/
79HEADERS += Src/Menus/BootMenu/
80HEADERS += Src/Libraries/
81HEADERS += Src/VariablesAndDPTs/
82
83# Subdirectories where library files are:
84LIBS = ../Assembly_Library/Inc/
85LIBS += ../Assembly_Library/Src/
86LIBS += ../Assembly_Library/Src/Display/
87LIBS += ../Assembly_Library/Src/File/
88LIBS += ../Assembly_Library/Src/Keyboard/
89LIBS += ../Assembly_Library/Src/Menu/
90LIBS += ../Assembly_Library/Src/Menu/Dialog/
91LIBS += ../Assembly_Library/Src/String/
92LIBS += ../Assembly_Library/Src/Time/
93LIBS += ../Assembly_Library/Src/Util/
94LIBS += ../Assembly_Library/Src/Serial/
95LIBS += ../XTIDE_Universal_BIOS/Inc/
96HEADERS += $(LIBS)
97
98
99#################################################################
100# Assembler preprocessor defines. #
101#################################################################
102DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_EBIOS MODULE_FEATURE_SETS RESERVE_DIAGNOSTIC_CYLINDER
103DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE_ADVANCED CREATE_COMPATIBLE_DPT
104
105DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE_ADVANCED
106DEFINES_XTPLUS = $(DEFINES_COMMON) $(DEFINES_XT) USE_186
107DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 MODULE_IRQ MODULE_ADVANCED_ATA CREATE_COMPATIBLE_DPT
108
109DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE)
110DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE)
111DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
112
113DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE
114DEFINES_386_8K = $(DEFINES_AT) USE_386 CREATE_COMPATIBLE_DPT
115
116DEFINES_ALL_FEATURES = MODULE_8BIT_IDE MODULE_8BIT_IDE_ADVANCED MODULE_ADVANCED_ATA MODULE_EBIOS MODULE_BOOT_MENU MODULE_HOTKEYS MODULE_IRQ MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_STRINGS_COMPRESSED MODULE_FEATURE_SETS
117DEFINES_ALL_FEATURES += ELIMINATE_CGA_SNOW RELOCATE_INT13H_STACK RESERVE_DIAGNOSTIC_CYLINDER
118
119
120###################
121# Other variables #
122###################
123
124# Target size of the ROM, used in main.asm for number of 512B blocks and by checksum Perl script below
125BIOS_SIZE = 8192 # For BIOS header (use even multiplier!)
126ROMSIZE = $(BIOS_SIZE) # Size of binary to build when building with make checksum
127BIOS_SIZE_LARGE = 12288
128ROMSIZE_LARGE = $(BIOS_SIZE_LARGE)
129
130# Add -D in front of every preprocessor define declaration
131DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
132DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
133DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
134DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
135DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
136DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
137DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
138DEFS_386_8K = $(DEFINES_386_8K:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
139DEFS_ALL_FEATURES = $(DEFINES_ALL_FEATURES:%=-D%)
140
141# Add -I in front of all header directories
142IHEADERS = $(HEADERS:%=-I%)
143
144# Path + target file to be built
145TARGET = $(BUILD_DIR)/$(PROG)
146
147#########################
148# Compilers and linkers #
149#########################
150
151# Make
152MAKE = mingw32-make.exe
153
154# Assembler
155AS = nasm.exe
156
157# use this command to erase files.
158RM = -del /Q
159
160
161#############################
162# Compiler and linker flags #
163#############################
164
165# Assembly compiler flags
166ASFLAGS = -f bin # Produce binary object files
167ASFLAGS += $(IHEADERS) # Set header file directory paths
168ASFLAGS += -Worphan-labels # Warn about labels without colon
169ASFLAGS += -Ox # Optimize operands to their shortest forms
170
171
172############################################
173# Build process. Actual work is done here. #
174############################################
175
176all: clean small large
177 @echo All done!
178
179small: xt_tiny xt xtplus at 386_8k
180 @echo All small binaries built!
181
182large: xt_large xtplus_large at_large
183 @echo All large binaries built!
184
185at:
186 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
187 @echo * Small AT version "$(TARGET)_at.bin" built.
188
189at_large:
190 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
191 @echo *Large AT version "$(TARGET)_atl.bin" built.
192
193xtplus:
194 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
195 @echo * Small XT Plus version "$(TARGET)_xtp.bin" built.
196
197xtplus_large:
198 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
199 @echo *Large XT Plus version "$(TARGET)_xtpl.bin" built.
200
201xt:
202 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
203 @echo * Small XT version "$(TARGET)_xt.bin" built.
204
205xt_large:
206 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
207 @echo *Large XT version "$(TARGET)_xtl.bin" built.
208
209xt_tiny:
210 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin"
211 @echo * Tiny XT version "$(TARGET)_tiny.bin" built.
212
213386_8k:
214 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_8K) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
215 @echo * Small 386 version "$(TARGET)_386.bin" built.
216
217strings: src\Strings.asm
218 @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
219 @perl ..\tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
220 @echo StringsCompressed.asm updated!
221
222clean:
223 @$(RM) $(BUILD_DIR)\*.*
224 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
225
226checksum: all
227 @perl ..\tools\checksum.pl $(TARGET)_tiny.bin $(ROMSIZE)
228 @perl ..\tools\checksum.pl $(TARGET)_xt.bin $(ROMSIZE)
229 @perl ..\tools\checksum.pl $(TARGET)_xtp.bin $(ROMSIZE)
230 @perl ..\tools\checksum.pl $(TARGET)_at.bin $(ROMSIZE)
231 @perl ..\tools\checksum.pl $(TARGET)_xtl.bin $(ROMSIZE_LARGE)
232 @perl ..\tools\checksum.pl $(TARGET)_xtpl.bin $(ROMSIZE_LARGE)
233 @perl ..\tools\checksum.pl $(TARGET)_atl.bin $(ROMSIZE_LARGE)
234 @perl ..\tools\checksum.pl $(TARGET)_386.bin $(ROMSIZE)
235
236unused:
237 @echo "All Features"
238 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -l"$(TARGET)_unused.lst"
239 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
240 @perl ..\tools\unused.pl $(TARGET)_unused.lst $(TARGET)_unused.asm
241 @echo "XT Small"
242 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst"
243 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
244 @perl ..\tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm
245 @echo "XT Large"
246 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst"
247 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
248 @perl ..\tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm
249 @echo "AT Small"
250 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst"
251 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
252 @perl ..\tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm
253 @echo "AT Large"
254 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst"
255 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
256 @perl ..\tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm
257
258
Note: See TracBrowser for help on using the repository browser.