source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 491

Last change on this file since 491 was 491, checked in by krille_n_@…, 12 years ago

Changes:

  • Added a new define (USE_UNDOC_INTEL) that enables optimizations possible by using undocumented instructions available on all Intel processors and truly compatible clones. AFAIK the only exceptions are the NEC V-series and the Sony CXQ70108 processors so this option should be safe for use on the AT builds.
  • Building BIOSDRVS or the BIOS without MODULE_STRINGS_COMPRESSED would fail due to the recent code exclusions so I changed them a bit. Also fixed the mistaken change to Main.asm
  • Changed the Tandy specific info in Configuration_FullMode.txt so it matches the info in the Wiki.
  • Optimizations and fixes in general.
File size: 12.2 KB
Line 
1####################################################################################################
2# Makefile to build XTIDE Universal BIOS. #
3# #
4# Valid makefile targets are: #
5# all Removes existing files and builds binary files in \Build #
6# small Builds 8 kiB binaries only (without checksum) #
7# large Builds 15 kiB binaries only (without checksum) #
8# clean Removes all files from \Build #
9# checksum* Builds all and then generates checksum byte to all binary files #
10# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
11# #
12# * at the end of target name means that Perl is required for the job. #
13# Build directory must be created manually if it does not exist. #
14# #
15# #
16# Following modules can be included or excluded: #
17# MODULE_8BIT_IDE Support for 8-BIT IDE cards like XTIDE #
18# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers #
19# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
20# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
21# MODULE_HOTKEYS Hotkey Bar to boot from any drive #
22# MODULE_IRQ IDE IRQ support #
23# MODULE_SERIAL Virtual hard disks using serial port #
24# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
25# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
26# MODULE_FEATURE_SETS Power Management support #
27# #
28# Not modules but these affect the assembly: #
29# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
30# RELOCATE_INT13H_STACK Relocates INT 13h stack to top of stolen conventional memory #
31# RESERVE_DIAGNOSTIC_CYLINDER Reserve one L-CHS cylinder for compatibility with old BIOSes #
32# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
33# USE_286 Use instructions supported by 286 and later #
34# USE_386 Use instructions supported by 386 and later #
35# USE_AT Use features supported on AT and later systems (not available on XT) #
36# USE_UNDOC_INTEL Optimizations for Intel CPU:s - do NOT use on NEC V20/V30/Sony CPU:s #
37# #
38####################################################################################################
39
40###########################################
41# Source files and destination executable #
42###########################################
43
44# Assembly source code file (*.asm):
45SRC_ASM = Src/Main.asm
46
47# Program executable file name without extension:
48PROG = ide
49
50
51#######################################
52# Destination and include directories #
53#######################################
54
55# Directory where binary file will be compiled to
56BUILD_DIR = Build
57
58# Subdirectories where included files are:
59HEADERS = Inc/
60HEADERS += Inc/Controllers/
61HEADERS += Src/
62HEADERS += Src/Handlers/
63HEADERS += Src/Handlers/Int13h/
64HEADERS += Src/Handlers/Int13h/EBIOS/
65HEADERS += Src/Handlers/Int13h/Tools/
66HEADERS += Src/Handlers/Int19h/
67HEADERS += Src/Device/
68HEADERS += Src/Device/IDE/
69HEADERS += Src/Device/MemoryMappedIDE/
70HEADERS += Src/Device/Serial/
71HEADERS += Src/Initialization/
72HEADERS += Src/Initialization/AdvancedAta/
73HEADERS += Src/Menus/
74HEADERS += Src/Menus/BootMenu/
75HEADERS += Src/Libraries/
76HEADERS += Src/VariablesAndDPTs/
77
78# Subdirectories where library files are:
79LIBS = ../Assembly_Library/Inc/
80LIBS += ../Assembly_Library/Src/
81LIBS += ../Assembly_Library/Src/Display/
82LIBS += ../Assembly_Library/Src/File/
83LIBS += ../Assembly_Library/Src/Keyboard/
84LIBS += ../Assembly_Library/Src/Menu/
85LIBS += ../Assembly_Library/Src/Menu/Dialog/
86LIBS += ../Assembly_Library/Src/String/
87LIBS += ../Assembly_Library/Src/Time/
88LIBS += ../Assembly_Library/Src/Util/
89LIBS += ../Assembly_Library/Src/Serial/
90LIBS += ../XTIDE_Universal_BIOS/Inc/
91HEADERS += $(LIBS)
92
93
94#################################################################
95# Assembler preprocessor defines. #
96#################################################################
97DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_EBIOS MODULE_FEATURE_SETS RESERVE_DIAGNOSTIC_CYLINDER
98DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE
99
100DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE MODULE_SERIAL MODULE_SERIAL_FLOPPY
101DEFINES_XTPLUS = $(DEFINES_COMMON) $(DEFINES_XT) USE_186
102DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 USE_UNDOC_INTEL RELOCATE_INT13H_STACK MODULE_IRQ MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_ADVANCED_ATA
103
104DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE)
105DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE)
106DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
107
108DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE
109DEFINES_386_8K = $(DEFINES_AT) USE_386
110
111DEFINES_ALL_FEATURES = MODULE_8BIT_IDE MODULE_ADVANCED_ATA MODULE_BOOT_MENU MODULE_EBIOS MODULE_HOTKEYS MODULE_IRQ MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_STRINGS_COMPRESSED MODULE_FEATURE_SETS
112
113
114###################
115# Other variables #
116###################
117
118# Target size of the ROM, used in main.asm for number of 512B blocks and by checksum Perl script below
119ROMSIZE = 8192
120ROMSIZE_LARGE = 15360
121
122# Add -D in front of every preprocessor define declaration
123DEFS_XT = $(DEFINES_XT:%=-D%) -DROMSIZE=$(ROMSIZE)
124DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DROMSIZE=$(ROMSIZE)
125DEFS_AT = $(DEFINES_AT:%=-D%) -DROMSIZE=$(ROMSIZE)
126DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
127DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
128DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
129DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DROMSIZE=$(ROMSIZE)
130DEFS_386_8K = $(DEFINES_386_8K:%=-D%) -DROMSIZE=$(ROMSIZE)
131DEFS_ALL_FEATURES = $(DEFINES_ALL_FEATURES:%=-D%)
132
133# Add -I in front of all header directories
134IHEADERS = $(HEADERS:%=-I%)
135
136# Path + target file to be built
137TARGET = $(BUILD_DIR)/$(PROG)
138
139#########################
140# Compilers and linkers #
141#########################
142
143# Make
144MAKE = mingw32-make.exe
145
146# Assembler
147AS = nasm.exe
148
149# use this command to erase files.
150RM = -del /Q
151
152
153#############################
154# Compiler and linker flags #
155#############################
156
157# Assembly compiler flags
158ASFLAGS = -f bin # Produce binary object files
159ASFLAGS += $(IHEADERS) # Set header file directory paths
160ASFLAGS += -Worphan-labels # Warn about labels without colon
161ASFLAGS += -Ox # Optimize operands to their shortest forms
162
163
164############################################
165# Build process. Actual work is done here. #
166############################################
167
168all: clean small large
169 @echo All done!
170
171small: xt_tiny xt xtplus at 386_8k
172 @echo All 8 kiB binaries built!
173
174large: xt_large xtplus_large at_large
175 @echo All 15 kiB binaries built!
176
177at:
178 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
179 @echo * 8k AT version "$(TARGET)_at.bin" built.
180
181at_large:
182 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
183 @echo *15k AT version "$(TARGET)_atl.bin" built.
184
185xtplus:
186 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
187 @echo * 8k XT Plus version "$(TARGET)_xtp.bin" built.
188
189xtplus_large:
190 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
191 @echo *15k XT Plus version "$(TARGET)_xtpl.bin" built.
192
193xt:
194 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
195 @echo * 8k XT version "$(TARGET)_xt.bin" built.
196
197xt_large:
198 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
199 @echo *15k XT version "$(TARGET)_xtl.bin" built.
200
201xt_tiny:
202 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin"
203 @echo * Tiny XT version "$(TARGET)_tiny.bin" built.
204
205386_8k:
206 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_8K) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
207 @echo * 8k 386 version "$(TARGET)_386.bin" built.
208
209strings: src\Strings.asm
210 @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
211 @perl ..\tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
212 @echo StringsCompressed.asm updated!
213
214clean:
215 @$(RM) $(BUILD_DIR)\*.*
216 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
217
218checksum: all
219 @perl ..\tools\checksum.pl $(TARGET)_tiny.bin $(ROMSIZE)
220 @perl ..\tools\checksum.pl $(TARGET)_xt.bin $(ROMSIZE)
221 @perl ..\tools\checksum.pl $(TARGET)_xtp.bin $(ROMSIZE)
222 @perl ..\tools\checksum.pl $(TARGET)_at.bin $(ROMSIZE)
223 @perl ..\tools\checksum.pl $(TARGET)_xtl.bin $(ROMSIZE_LARGE)
224 @perl ..\tools\checksum.pl $(TARGET)_xtpl.bin $(ROMSIZE_LARGE)
225 @perl ..\tools\checksum.pl $(TARGET)_atl.bin $(ROMSIZE_LARGE)
226 @perl ..\tools\checksum.pl $(TARGET)_386.bin $(ROMSIZE)
227
228unused:
229 @echo "All Features"
230 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -l"$(TARGET)_unused.lst"
231 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
232 @perl ..\tools\unused.pl $(TARGET)_unused.lst $(TARGET)_unused.asm
233 @echo "XT Small"
234 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst"
235 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
236 @perl ..\tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm
237 @echo "XT Large"
238 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst"
239 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
240 @perl ..\tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm
241 @echo "AT Small"
242 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst"
243 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
244 @perl ..\tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm
245 @echo "AT Large"
246 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst"
247 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
248 @perl ..\tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm
249
250
Note: See TracBrowser for help on using the repository browser.