source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 398

Last change on this file since 398 was 398, checked in by aitotat@…, 13 years ago

Changes to XTIDE Universal BIOS:

  • IRQ related stuff is now optional MODULE_IRQ.
  • XT builds no longer include support for IDE IRQ.
File size: 9.8 KB
Line 
1##################################################################################################
2# Makefile to build XTIDE Universal BIOS. #
3# #
4# Valid makefile targets are: #
5# all Removes existing files and builds binary files in \Build #
6# small Builds 8 kiB binaries only (without checksum) #
7# large Builds 15 kiB binaries only (without checksum) #
8# clean Removes all files from \Build #
9# checksum* Builds all and then generates checksum byte to all binary files #
10# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
11# #
12# * at the end of target name means that Perl is required for the job. #
13# Build directory must be created manually if it does not exist. #
14# #
15# #
16# Following modules can be included or excluded: #
17# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers #
18# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
19# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
20# MODULE_HOTKEYS Hotkey Bar to boot from any drive #
21# MODULE_IRQ IDE IRQ support #
22# MODULE_JRIDE Support for JR-IDE/ISA #
23# MODULE_SERIAL Virtual hard disks using serial port #
24# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
25# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
26# #
27# Not modules but these affect the assembly: #
28# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
29# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
30# USE_286 Use instructions supported by 286 and later #
31# USE_386 Use instructions supported by 386 and later #
32# USE_AT Use features supported on AT and later systems (not available on XT) #
33# #
34##################################################################################################
35
36###########################################
37# Source files and destination executable #
38###########################################
39
40# Assembly source code file (*.asm):
41SRC_ASM = Src/Main.asm
42
43# Program executable file name without extension:
44PROG = ide
45
46
47#######################################
48# Destination and include directories #
49#######################################
50
51# Directory where binary file will be compiled to
52BUILD_DIR = Build
53
54# Subdirectories where included files are:
55HEADERS = Inc/
56HEADERS += Inc/Controllers/
57HEADERS += Src/
58HEADERS += Src/Handlers/
59HEADERS += Src/Handlers/Int13h/
60HEADERS += Src/Handlers/Int13h/EBIOS/
61HEADERS += Src/Handlers/Int13h/Tools/
62HEADERS += Src/Handlers/Int19h/
63HEADERS += Src/Device/
64HEADERS += Src/Device/IDE/
65HEADERS += Src/Device/MemoryMappedIDE/
66HEADERS += Src/Device/Serial/
67HEADERS += Src/Initialization/
68HEADERS += Src/Initialization/AdvancedAta/
69HEADERS += Src/Menus/
70HEADERS += Src/Menus/BootMenu/
71HEADERS += Src/Libraries/
72HEADERS += Src/VariablesAndDPTs/
73
74# Subdirectories where library files are:
75LIBS = ../Assembly_Library/Inc/
76LIBS += ../Assembly_Library/Src/
77LIBS += ../Assembly_Library/Src/Display/
78LIBS += ../Assembly_Library/Src/File/
79LIBS += ../Assembly_Library/Src/Keyboard/
80LIBS += ../Assembly_Library/Src/Menu/
81LIBS += ../Assembly_Library/Src/Menu/Dialog/
82LIBS += ../Assembly_Library/Src/String/
83LIBS += ../Assembly_Library/Src/Time/
84LIBS += ../Assembly_Library/Src/Util/
85LIBS += ../Assembly_Library/Src/Serial/
86LIBS += ../XTIDE_Universal_BIOS/Inc/
87HEADERS += $(LIBS)
88
89
90#################################################################
91# Assembler preprocessor defines. #
92#################################################################
93DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_EBIOS
94DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_JRIDE MODULE_SERIAL MODULE_SERIAL_FLOPPY
95
96DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_JRIDE MODULE_SERIAL MODULE_SERIAL_FLOPPY
97DEFINES_XTPLUS = $(DEFINES_COMMON) $(DEFINES_XT) USE_186
98DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 MODULE_IRQ MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_ADVANCED_ATA
99
100DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE)
101DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE)
102DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
103
104DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED
105DEFINES_386_8K = $(DEFINES_AT) USE_386
106
107
108###################
109# Other variables #
110###################
111
112# Target size of the ROM, used in main.asm for number of 512B blocks and by checksum Perl script below
113ROMSIZE = 8192
114ROMSIZE_LARGE = 15360
115
116# Add -D in front of every preprocessor define declaration
117DEFS_XT = $(DEFINES_XT:%=-D%) -DROMSIZE=$(ROMSIZE)
118DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DROMSIZE=$(ROMSIZE)
119DEFS_AT = $(DEFINES_AT:%=-D%) -DROMSIZE=$(ROMSIZE)
120DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
121DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
122DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
123DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DROMSIZE=$(ROMSIZE)
124DEFS_386_8K = $(DEFINES_386_8K:%=-D%) -DROMSIZE=$(ROMSIZE)
125
126# Add -I in front of all header directories
127IHEADERS = $(HEADERS:%=-I%)
128
129# Path + target file to be built
130TARGET = $(BUILD_DIR)/$(PROG)
131
132#########################
133# Compilers and linkers #
134#########################
135
136# Make
137MAKE = mingw32-make.exe
138
139# Assembler
140AS = nasm.exe
141
142# use this command to erase files.
143RM = -del /Q
144
145
146#############################
147# Compiler and linker flags #
148#############################
149
150# Assembly compiler flags
151ASFLAGS = -f bin # Produce binary object files
152ASFLAGS += $(IHEADERS) # Set header file directory paths
153ASFLAGS += -Worphan-labels # Warn about labels without colon
154ASFLAGS += -Ox # Optimize operands to their shortest forms
155
156
157############################################
158# Build process. Actual work is done here. #
159############################################
160
161all: clean small large
162 @echo All done!
163
164small: xt_tiny xt xtplus at 386_8k
165 @echo All 8 kiB binaries built!
166
167large: xt_large xtplus_large at_large
168 @echo All 15 kiB binaries built!
169
170at:
171 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
172 @echo * 8k AT version "$(TARGET)_at.bin" built.
173
174at_large:
175 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
176 @echo *15k AT version "$(TARGET)_atl.bin" built.
177
178xtplus:
179 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
180 @echo * 8k XT Plus version "$(TARGET)_xtp.bin" built.
181
182xtplus_large:
183 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
184 @echo *15k XT Plus version "$(TARGET)_xtpl.bin" built.
185
186xt:
187 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
188 @echo * 8k XT version "$(TARGET)_xt.bin" built.
189
190xt_large:
191 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
192 @echo *15k XT version "$(TARGET)_xtl.bin" built.
193
194xt_tiny:
195 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin"
196 @echo * Tiny XT version "$(TARGET)_tiny.bin" built.
197
198386_8k:
199 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_8K) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
200 @echo * 8k 386 version "$(TARGET)_386.bin" built.
201
202strings: src\Strings.asm
203 @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_XT) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
204 @perl ..\tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
205 @echo StringsCompressed.asm updated!
206
207clean:
208 @$(RM) $(BUILD_DIR)\*.*
209 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
210
211checksum: all
212 @perl ..\tools\checksum.pl $(TARGET)_tiny.bin $(ROMSIZE)
213 @perl ..\tools\checksum.pl $(TARGET)_xt.bin $(ROMSIZE)
214 @perl ..\tools\checksum.pl $(TARGET)_xtp.bin $(ROMSIZE)
215 @perl ..\tools\checksum.pl $(TARGET)_at.bin $(ROMSIZE)
216 @perl ..\tools\checksum.pl $(TARGET)_xtl.bin $(ROMSIZE_LARGE)
217 @perl ..\tools\checksum.pl $(TARGET)_xtpl.bin $(ROMSIZE_LARGE)
218 @perl ..\tools\checksum.pl $(TARGET)_atl.bin $(ROMSIZE_LARGE)
219 @perl ..\tools\checksum.pl $(TARGET)_386.bin $(ROMSIZE)
220
221xt_unused: xt
222 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_xt_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
223 @perl ..\tools\unused.pl $(TARGET)_xt.lst $(TARGET)_xt_unused.asm
224
Note: See TracBrowser for help on using the repository browser.