#################################################################################################### # Makefile to build XTIDE Universal BIOS. # # # # Valid makefile targets are: # # all Removes existing files and builds binary files in \Build # # small Builds 8 kiB binaries only (without checksum) # # large Builds 12 kiB binaries only (without checksum) # # clean Removes all files from \Build # # checksum* Builds all and then generates checksum byte to all binary files # # strings* Compress src\Strings.asm to src\StringsCompressed.asm # # unused* Checks if there are any unused functions that can be removed to save space # # # # * at the end of target name means that Perl is required for the job. # # Build directory must be created manually if it does not exist. # # # # # # Following modules can be included or excluded: # # MODULE_8BIT_IDE Support for 8-BIT IDE cards like XTIDE # # MODULE_8BIT_IDE_ADVANCED Support for memory mapped and DMA based cards like JRIDE and XTCF # # MODULE_ADVANCED_ATA Native support for some VLB IDE controllers # # MODULE_BOOT_MENU Boot Menu for selection of drive to boot from # # MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB # # MODULE_HOTKEYS Hotkey Bar to boot from any drive # # MODULE_IRQ IDE IRQ support # # MODULE_SERIAL Virtual hard disks using serial port # # MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) # # MODULE_STRINGS_COMPRESSED Use compressed strings to save space # # MODULE_FEATURE_SETS Power Management support # # # # Not modules but these affect the assembly: # # ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes # # RELOCATE_INT13H_STACK ** Relocates INT 13h stack to beginning of stolen conventional memory # # RESERVE_DIAGNOSTIC_CYLINDER Reserve one L-CHS cylinder for compatibility with old BIOSes # # USE_186 Use instructions supported by 80188/80186 and V20/V30 and later # # USE_286 Use instructions supported by 286 and later (defines USE_UNDOC_INTEL)# # USE_386 Use instructions supported by 386 and later (defines USE_286) # # USE_AT Use features supported on AT and later systems (not available on XT) # # USE_UNDOC_INTEL Optimizations for Intel CPU:s - do NOT use on NEC V20/V30/Sony CPU:s # # # # ** AT Builds only (when USE_AT is defined) # #################################################################################################### ########################################### # Source files and destination executable # ########################################### # Assembly source code file (*.asm): SRC_ASM = Src/Main.asm # Program executable file name without extension: PROG = ide ####################################### # Destination and include directories # ####################################### # Directory where binary file will be compiled to BUILD_DIR = Build # Subdirectories where included files are: HEADERS = Inc/ HEADERS += Inc/Controllers/ HEADERS += Src/ HEADERS += Src/Handlers/ HEADERS += Src/Handlers/Int13h/ HEADERS += Src/Handlers/Int13h/EBIOS/ HEADERS += Src/Handlers/Int13h/Tools/ HEADERS += Src/Handlers/Int19h/ HEADERS += Src/Device/ HEADERS += Src/Device/IDE/ HEADERS += Src/Device/MemoryMappedIDE/ HEADERS += Src/Device/Serial/ HEADERS += Src/Initialization/ HEADERS += Src/Initialization/AdvancedAta/ HEADERS += Src/Menus/ HEADERS += Src/Menus/BootMenu/ HEADERS += Src/Libraries/ HEADERS += Src/VariablesAndDPTs/ # Subdirectories where library files are: LIBS = ../Assembly_Library/Inc/ LIBS += ../Assembly_Library/Src/ LIBS += ../Assembly_Library/Src/Display/ LIBS += ../Assembly_Library/Src/File/ LIBS += ../Assembly_Library/Src/Keyboard/ LIBS += ../Assembly_Library/Src/Menu/ LIBS += ../Assembly_Library/Src/Menu/Dialog/ LIBS += ../Assembly_Library/Src/String/ LIBS += ../Assembly_Library/Src/Time/ LIBS += ../Assembly_Library/Src/Util/ LIBS += ../Assembly_Library/Src/Serial/ LIBS += ../XTIDE_Universal_BIOS/Inc/ HEADERS += $(LIBS) ################################################################# # Assembler preprocessor defines. # ################################################################# DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_EBIOS MODULE_FEATURE_SETS RESERVE_DIAGNOSTIC_CYLINDER DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE_ADVANCED DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE_ADVANCED DEFINES_XTPLUS = $(DEFINES_COMMON) $(DEFINES_XT) USE_186 DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 MODULE_IRQ MODULE_ADVANCED_ATA DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE) DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE) DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE) DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE DEFINES_386_8K = $(DEFINES_AT) USE_386 DEFINES_ALL_FEATURES = MODULE_8BIT_IDE MODULE_8BIT_IDE_ADVANCED MODULE_ADVANCED_ATA MODULE_EBIOS MODULE_BOOT_MENU MODULE_HOTKEYS MODULE_IRQ MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_STRINGS_COMPRESSED MODULE_FEATURE_SETS DEFINES_ALL_FEATURES += ELIMINATE_CGA_SNOW RELOCATE_INT13H_STACK RESERVE_DIAGNOSTIC_CYLINDER ################### # Other variables # ################### # Target size of the ROM, used in main.asm for number of 512B blocks and by checksum Perl script below BIOS_SIZE = 8192 # For BIOS header (use even multiplier!) ROMSIZE = $(BIOS_SIZE) # Size of binary to build when building with make checksum BIOS_SIZE_LARGE = 12288 ROMSIZE_LARGE = $(BIOS_SIZE_LARGE) # Add -D in front of every preprocessor define declaration DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE) DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE) DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE) DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE) DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE) DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE) DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE) DEFS_386_8K = $(DEFINES_386_8K:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE) DEFS_ALL_FEATURES = $(DEFINES_ALL_FEATURES:%=-D%) # Add -I in front of all header directories IHEADERS = $(HEADERS:%=-I%) # Path + target file to be built TARGET = $(BUILD_DIR)/$(PROG) ######################### # Compilers and linkers # ######################### # Make MAKE = mingw32-make.exe # Assembler AS = nasm.exe # use this command to erase files. RM = -del /Q ############################# # Compiler and linker flags # ############################# # Assembly compiler flags ASFLAGS = -f bin # Produce binary object files ASFLAGS += $(IHEADERS) # Set header file directory paths ASFLAGS += -Worphan-labels # Warn about labels without colon ASFLAGS += -Ox # Optimize operands to their shortest forms ############################################ # Build process. Actual work is done here. # ############################################ all: clean small large @echo All done! small: xt_tiny xt xtplus at 386_8k @echo All small binaries built! large: xt_large xtplus_large at_large @echo All large binaries built! at: @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin" @echo * Small AT version "$(TARGET)_at.bin" built. at_large: @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin" @echo *Large AT version "$(TARGET)_atl.bin" built. xtplus: @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin" @echo * Small XT Plus version "$(TARGET)_xtp.bin" built. xtplus_large: @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin" @echo *Large XT Plus version "$(TARGET)_xtpl.bin" built. xt: @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin" @echo * Small XT version "$(TARGET)_xt.bin" built. xt_large: @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin" @echo *Large XT version "$(TARGET)_xtl.bin" built. xt_tiny: @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin" @echo * Tiny XT version "$(TARGET)_tiny.bin" built. 386_8k: @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_8K) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin" @echo * Small 386 version "$(TARGET)_386.bin" built. strings: src\Strings.asm @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst @perl ..\tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm @echo StringsCompressed.asm updated! clean: @$(RM) $(BUILD_DIR)\*.* @echo Deleted "(*.*)" from "$(BUILD_DIR)/" checksum: all @perl ..\tools\checksum.pl $(TARGET)_tiny.bin $(ROMSIZE) @perl ..\tools\checksum.pl $(TARGET)_xt.bin $(ROMSIZE) @perl ..\tools\checksum.pl $(TARGET)_xtp.bin $(ROMSIZE) @perl ..\tools\checksum.pl $(TARGET)_at.bin $(ROMSIZE) @perl ..\tools\checksum.pl $(TARGET)_xtl.bin $(ROMSIZE_LARGE) @perl ..\tools\checksum.pl $(TARGET)_xtpl.bin $(ROMSIZE_LARGE) @perl ..\tools\checksum.pl $(TARGET)_atl.bin $(ROMSIZE_LARGE) @perl ..\tools\checksum.pl $(TARGET)_386.bin $(ROMSIZE) unused: @echo "All Features" @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -l"$(TARGET)_unused.lst" @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS @perl ..\tools\unused.pl $(TARGET)_unused.lst $(TARGET)_unused.asm @echo "XT Small" @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst" @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS @perl ..\tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm @echo "XT Large" @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst" @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS @perl ..\tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm @echo "AT Small" @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst" @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS @perl ..\tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm @echo "AT Large" @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst" @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS @perl ..\tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm