source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 593

Last change on this file since 593 was 593, checked in by Tomi Tilli, 6 years ago

Flashing now works again.
Hack to get Windows 95 to work properly (MODULE_WIN95_CMOS_HACK included for 386 builds by default).
Edited makefile to produce large 386 build.
Fixed recovery time for QDI Vision VLB-IDE controllers.
No more warnings with Nasm 2.13.xx and later.
File dialog now properly restores default drive when file selection is cancelled.
File size: 14.1 KB
Line 
1####################################################################################################
2# Makefile to build XTIDE Universal BIOS. #
3# #
4# Valid makefile targets are: #
5# all Removes existing files and builds binary files in \Build #
6# small Builds 8 kiB binaries only (without checksum) #
7# large Builds 12 kiB binaries only (without checksum) #
8# clean Removes all files from \Build #
9# checksum* Builds all and then generates checksum byte to all binary files #
10# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
11# unused* Checks if there are any unused functions that can be removed to save space #
12# #
13# * at the end of target name means that Perl is required for the job. #
14# Build directory must be created manually if it does not exist. #
15# #
16# #
17# Following modules can be included or excluded: #
18# MODULE_8BIT_IDE Support for 8-BIT IDE cards like XTIDE #
19# MODULE_8BIT_IDE_ADVANCED Support for memory mapped and DMA based cards like JRIDE and XTCF #
20# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers (requires USE_386) #
21# MODULE_COMPATIBLE_TABLES Support for ill behaving software that tries to access DPT directly #
22# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
23# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
24# MODULE_HOTKEYS Hotkey Bar to boot from any drive #
25# MODULE_IRQ IDE IRQ support #
26# MODULE_SERIAL Virtual hard disks using serial port #
27# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
28# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
29# MODULE_VERY_LATE_INIT Initialize on INT 13h if our INT 19h handler is not called #
30# MODULE_POWER_MANAGEMENT Power Management support #
31# MODULE_WIN95_CMOS_HACK Hack for Windows 95 compatibility #
32# #
33# Not modules but these affect the assembly: #
34# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
35# RELOCATE_INT13H_STACK ** Relocates INT 13h stack to beginning of stolen conventional memory #
36# RESERVE_DIAGNOSTIC_CYLINDER Reserve one L-CHS cylinder for compatibility with old BIOSes #
37# NO_ATAID_VALIDATION *** Excludes code that tries to ensure proper communication with drives #
38# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
39# USE_286 Use instructions supported by 286 and later (defines USE_UNDOC_INTEL)#
40# USE_386 Use instructions supported by 386 and later (defines USE_286) #
41# USE_AT Use features supported on AT and later systems (not available on XT) #
42# USE_UNDOC_INTEL Optimizations for Intel CPU:s - do NOT use on NEC V20/V30/Sony CPU:s #
43# USE_NEC_V Optimizations for use with NEC V20/V30 processors only #
44# CLD_NEEDED Only needed for compatibility with buggy software/BIOSes #
45# #
46# ** AT Builds only (when USE_AT is defined) #
47# *** Use this only when certain known good drives are not being detected (eg WD Caviars) #
48####################################################################################################
49
50###########################################
51# Source files and destination executable #
52###########################################
53
54# Assembly source code file (*.asm):
55SRC_ASM = Src/Main.asm
56
57# Program executable file name without extension:
58PROG = ide
59
60
61#######################################
62# Destination and include directories #
63#######################################
64
65# Directory where binary file will be compiled to
66BUILD_DIR = Build
67
68# Subdirectories where included files are:
69HEADERS = Inc/
70HEADERS += Inc/Controllers/
71HEADERS += Src/
72HEADERS += Src/Handlers/
73HEADERS += Src/Handlers/Int13h/
74HEADERS += Src/Handlers/Int13h/EBIOS/
75HEADERS += Src/Handlers/Int13h/Tools/
76HEADERS += Src/Handlers/Int19h/
77HEADERS += Src/Device/
78HEADERS += Src/Device/IDE/
79HEADERS += Src/Device/MemoryMappedIDE/
80HEADERS += Src/Device/Serial/
81HEADERS += Src/Initialization/
82HEADERS += Src/Initialization/AdvancedAta/
83HEADERS += Src/Menus/
84HEADERS += Src/Menus/BootMenu/
85HEADERS += Src/Libraries/
86HEADERS += Src/VariablesAndDPTs/
87
88# Subdirectories where library files are:
89LIBS = ../Assembly_Library/Inc/
90LIBS += ../Assembly_Library/Src/
91LIBS += ../Assembly_Library/Src/Display/
92LIBS += ../Assembly_Library/Src/File/
93LIBS += ../Assembly_Library/Src/Keyboard/
94LIBS += ../Assembly_Library/Src/Menu/
95LIBS += ../Assembly_Library/Src/Menu/Dialog/
96LIBS += ../Assembly_Library/Src/String/
97LIBS += ../Assembly_Library/Src/Time/
98LIBS += ../Assembly_Library/Src/Util/
99LIBS += ../Assembly_Library/Src/Serial/
100LIBS += ../XTIDE_Universal_BIOS/Inc/
101HEADERS += $(LIBS)
102
103
104#################################################################
105# Assembler preprocessor defines. #
106#################################################################
107DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_EBIOS MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_POWER_MANAGEMENT RESERVE_DIAGNOSTIC_CYLINDER NO_ATAID_VALIDATION CLD_NEEDED
108DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE_ADVANCED MODULE_COMPATIBLE_TABLES
109
110DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE_ADVANCED
111DEFINES_XTPLUS = $(DEFINES_XT) USE_186
112DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 MODULE_IRQ MODULE_COMPATIBLE_TABLES
113
114DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE)
115DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE)
116DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
117
118DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE NO_ATAID_VALIDATION CLD_NEEDED
119DEFINES_386 = $(DEFINES_AT) USE_386 MODULE_ADVANCED_ATA MODULE_WIN95_CMOS_HACK
120DEFINES_386_LARGE = $(DEFINES_AT_LARGE) USE_386 MODULE_ADVANCED_ATA MODULE_WIN95_CMOS_HACK
121
122DEFINES_ALL_FEATURES = MODULE_8BIT_IDE MODULE_8BIT_IDE_ADVANCED MODULE_ADVANCED_ATA MODULE_EBIOS MODULE_BOOT_MENU MODULE_HOTKEYS MODULE_IRQ MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_STRINGS_COMPRESSED MODULE_POWER_MANAGEMENT MODULE_COMPATIBLE_TABLES
123DEFINES_ALL_FEATURES += ELIMINATE_CGA_SNOW RELOCATE_INT13H_STACK RESERVE_DIAGNOSTIC_CYLINDER MODULE_WIN95_CMOS_HACK
124
125
126###################
127# Other variables #
128###################
129
130# Target size of the BIOS, used in main.asm for number of 512B blocks (CNT_ROM_BLOCKS) and by checksum Perl script below ('make checksum').
131# Note! The size must be a multiple of 2 KB for compatibility reasons.
132BIOS_SIZE_TINY = 4096
133BIOS_SIZE_SMALL = 8192
134BIOS_SIZE_LARGE = 10240
135
136# Add -D in front of every preprocessor define declaration
137DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
138DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
139DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
140DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
141DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
142DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
143DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_TINY)
144DEFS_386 = $(DEFINES_386:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
145DEFS_386_LARGE = $(DEFINES_386_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
146DEFS_ALL_FEATURES = $(DEFINES_ALL_FEATURES:%=-D%)
147
148# Add -I in front of all header directories
149IHEADERS = $(HEADERS:%=-I%)
150
151# Path + target file to be built
152TARGET = $(BUILD_DIR)/$(PROG)
153
154#########################
155# Compilers and linkers #
156#########################
157
158# Make
159MAKE = mingw32-make.exe
160
161# Assembler
162AS = nasm.exe
163
164# use this command to erase files.
165RM = -del /Q
166
167
168#############################
169# Compiler and linker flags #
170#############################
171
172# Assembly compiler flags
173ASFLAGS = -f bin # Produce binary object files
174ASFLAGS += $(IHEADERS) # Set header file directory paths
175ASFLAGS += -Worphan-labels # Warn about labels without colon
176ASFLAGS += -Ox # Optimize operands to their shortest forms
177
178
179############################################
180# Build process. Actual work is done here. #
181############################################
182
183all: clean small large
184 @echo All done!
185
186small: xt_tiny xt xtplus at 386
187 @echo All small binaries built!
188
189large: xt_large xtplus_large at_large 386_large
190 @echo All large binaries built!
191
192at:
193 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
194 @echo * Small AT version "$(TARGET)_at.bin" built.
195
196at_large:
197 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
198 @echo * Large AT version "$(TARGET)_atl.bin" built.
199
200xtplus:
201 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
202 @echo * Small XT Plus version "$(TARGET)_xtp.bin" built.
203
204xtplus_large:
205 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
206 @echo * Large XT Plus version "$(TARGET)_xtpl.bin" built.
207
208xt:
209 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
210 @echo * Small XT version "$(TARGET)_xt.bin" built.
211
212xt_large:
213 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
214 @echo * Large XT version "$(TARGET)_xtl.bin" built.
215
216xt_tiny:
217 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin"
218 @echo * Tiny XT version "$(TARGET)_tiny.bin" built.
219
220386:
221 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
222 @echo * Small 386 version "$(TARGET)_386.bin" built.
223
224386_large:
225 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -l"$(TARGET)_386l.lst" -o"$(TARGET)_386l.bin"
226 @echo * Large 386 version "$(TARGET)_386l.bin" built.
227
228strings: src\Strings.asm
229 @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
230 @perl ..\Tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
231 @echo StringsCompressed.asm updated!
232
233clean:
234 @$(RM) $(BUILD_DIR)\*.*
235 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
236
237checksum: all
238 @perl ..\Tools\checksum.pl $(TARGET)_tiny.bin $(BIOS_SIZE_TINY)
239 @perl ..\Tools\checksum.pl $(TARGET)_xt.bin $(BIOS_SIZE_SMALL)
240 @perl ..\Tools\checksum.pl $(TARGET)_xtp.bin $(BIOS_SIZE_SMALL)
241 @perl ..\Tools\checksum.pl $(TARGET)_at.bin $(BIOS_SIZE_SMALL)
242 @perl ..\Tools\checksum.pl $(TARGET)_xtl.bin $(BIOS_SIZE_LARGE)
243 @perl ..\Tools\checksum.pl $(TARGET)_xtpl.bin $(BIOS_SIZE_LARGE)
244 @perl ..\Tools\checksum.pl $(TARGET)_atl.bin $(BIOS_SIZE_LARGE)
245 @perl ..\Tools\checksum.pl $(TARGET)_386.bin $(BIOS_SIZE_SMALL)
246 @perl ..\Tools\checksum.pl $(TARGET)_386l.bin $(BIOS_SIZE_LARGE)
247
248unused:
249 @echo "All Features"
250 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -l"$(TARGET)_unused.lst"
251 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
252 @perl ..\Tools\unused.pl $(TARGET)_unused.lst $(TARGET)_unused.asm
253 @echo "XT Small"
254 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst"
255 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
256 @perl ..\Tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm
257 @echo "XT Large"
258 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst"
259 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
260 @perl ..\Tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm
261 @echo "AT Small"
262 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst"
263 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
264 @perl ..\Tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm
265 @echo "AT Large"
266 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst"
267 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
268 @perl ..\Tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm
269
270
Note: See TracBrowser for help on using the repository browser.