source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 619

Last change on this file since 619 was 618, checked in by Krister Nordvall, 3 years ago

Changes:

  • Updated the BIOS makefile. Added the NO_ATAID_CORRECTION define back to the Tiny build as I've realized that the correction code should not be needed for builds without MODULE_EBIOS. Also added a new makefile target 'custom' to make it easier for people to make custom builds.
  • Fixed a bug where calling INT 13h/AH=15h for drives not handled by XUB (floppy drives for example) would return an error due to the fact that any non-zero return value in AH from the other BIOS would cause the CF to be set in Int13h_SetErrorCodeToIntpackInSSBPfromAH. The return path is now via Int13h_ReturnFromHandlerWithoutStoringErrorCode which means that no status/error code will be returned in the BDA but that should not be a problem as the other BIOS should do that anyway. This change also fixed another potential problem where return values in DL from the other BIOS were assumed to be drive numbers when MODULE_SERIAL_FLOPPY is included in the build.
  • Minor optimizations and fixes.
File size: 15.2 KB
Line 
1####################################################################################################
2# Makefile to build XTIDE Universal BIOS. #
3# #
4# Valid makefile targets are: #
5# all Removes existing files and builds binary files in \Build (without checksums) #
6# small Builds only binaries smaller than or equal to 8 kiB (without checksums) #
7# large Builds only binaries larger than 8 kiB (without checksums) #
8# custom Builds custom binary without checksum (change DEFINES_CUSTOM / BIOS_SIZE_CUSTOM first) #
9# clean Removes all files from \Build #
10# checksum* Same as 'all' but also applies checksums to the binaries #
11# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
12# unused* Checks if there are any unused functions that can be removed to save space #
13# #
14# * at the end of target name means that Perl is required for the job. #
15# Build directory must be created manually if it does not exist. #
16# #
17# #
18# Following modules can be included or excluded: #
19# MODULE_8BIT_IDE Support for 8-BIT IDE cards like XTIDE #
20# MODULE_8BIT_IDE_ADVANCED Support for memory mapped and DMA based cards like JRIDE and XTCF #
21# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers (requires USE_386) #
22# MODULE_COMPATIBLE_TABLES Support for ill behaving software that tries to access DPT directly #
23# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
24# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
25# MODULE_HOTKEYS Hotkey Bar to boot from any drive #
26# MODULE_IRQ IDE IRQ support #
27# MODULE_SERIAL Virtual hard disks using serial port #
28# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
29# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
30# MODULE_VERY_LATE_INIT Initialize on INT 13h if our INT 19h handler is not called #
31# MODULE_POWER_MANAGEMENT Power Management support #
32# MODULE_WIN9X_CMOS_HACK Hack for Windows 9x compatibility #
33# MODULE_MFM_COMPATIBILITY Restores BDA drive count for MFM controllers that expect to be the #
34# only hard drive controller on the system #
35# #
36# Not modules but these affect the assembly: #
37# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
38# RELOCATE_INT13H_STACK ** Relocates INT 13h stack to beginning of stolen conventional memory #
39# NO_ATAID_VALIDATION *** Excludes code that tries to ensure proper communication with drives #
40# NO_ATAID_CORRECTION Excludes code that corrects illegal CHS values from some CF cards #
41# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
42# USE_286 Use instructions supported by 286 and later (defines USE_UNDOC_INTEL)#
43# USE_386 Use instructions supported by 386 and later (defines USE_286) #
44# USE_AT Use features supported on AT and later systems (not available on XT) #
45# USE_UNDOC_INTEL Optimizations for Intel CPU:s - do NOT use on NEC V20/V30/Sony CPU:s #
46# USE_NEC_V Optimizations for use with NEC V20/V30 processors only #
47# CLD_NEEDED Only needed for compatibility with buggy software/BIOSes #
48# #
49# ** AT Builds only (when USE_AT is defined) #
50# *** Use this only when certain known good drives are not being detected (eg WD Caviars) #
51####################################################################################################
52
53###########################################
54# Source files and destination executable #
55###########################################
56
57# Assembly source code file (*.asm):
58SRC_ASM = Src/Main.asm
59
60# Program executable file name without extension:
61PROG = ide
62
63
64#######################################
65# Destination and include directories #
66#######################################
67
68# Directory where binary file will be compiled to
69BUILD_DIR = Build
70
71# Subdirectories where included files are:
72HEADERS = Inc/
73HEADERS += Inc/Controllers/
74HEADERS += Src/
75HEADERS += Src/Handlers/
76HEADERS += Src/Handlers/Int13h/
77HEADERS += Src/Handlers/Int13h/EBIOS/
78HEADERS += Src/Handlers/Int13h/Tools/
79HEADERS += Src/Handlers/Int19h/
80HEADERS += Src/Device/
81HEADERS += Src/Device/IDE/
82HEADERS += Src/Device/MemoryMappedIDE/
83HEADERS += Src/Device/Serial/
84HEADERS += Src/Initialization/
85HEADERS += Src/Initialization/AdvancedAta/
86HEADERS += Src/Menus/
87HEADERS += Src/Menus/BootMenu/
88HEADERS += Src/Libraries/
89HEADERS += Src/VariablesAndDPTs/
90
91# Subdirectories where library files are:
92LIBS = ../Assembly_Library/Inc/
93LIBS += ../Assembly_Library/Src/
94LIBS += ../Assembly_Library/Src/Display/
95LIBS += ../Assembly_Library/Src/File/
96LIBS += ../Assembly_Library/Src/Keyboard/
97LIBS += ../Assembly_Library/Src/Menu/
98LIBS += ../Assembly_Library/Src/Menu/Dialog/
99LIBS += ../Assembly_Library/Src/String/
100LIBS += ../Assembly_Library/Src/Time/
101LIBS += ../Assembly_Library/Src/Util/
102LIBS += ../Assembly_Library/Src/Serial/
103LIBS += ../XTIDE_Universal_BIOS/Inc/
104HEADERS += $(LIBS)
105
106
107##################################
108# Assembler preprocessor defines #
109##################################
110DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_EBIOS MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_POWER_MANAGEMENT NO_ATAID_VALIDATION CLD_NEEDED
111DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE_ADVANCED MODULE_COMPATIBLE_TABLES
112
113DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE_ADVANCED
114DEFINES_XTPLUS = $(DEFINES_XT) USE_186
115DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 MODULE_IRQ MODULE_COMPATIBLE_TABLES
116DEFINES_386 = $(DEFINES_AT) USE_386 MODULE_ADVANCED_ATA MODULE_WIN9X_CMOS_HACK
117
118DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE)
119DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE)
120DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
121DEFINES_386_LARGE = $(DEFINES_386) $(DEFINES_COMMON_LARGE)
122
123DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE NO_ATAID_VALIDATION NO_ATAID_CORRECTION CLD_NEEDED
124
125DEFINES_CUSTOM = ?
126
127
128###################
129# Other variables #
130###################
131
132# Target size of the BIOS, used in Main.asm for number of 512B blocks (CNT_ROM_BLOCKS) and by checksum Perl script below ('make checksum').
133# Note! The size must be a multiple of 2 KB for compatibility reasons.
134BIOS_SIZE_TINY = 4096
135BIOS_SIZE_SMALL = 8192
136BIOS_SIZE_LARGE = 10240
137BIOS_SIZE_CUSTOM = ?
138
139# Add -D in front of every preprocessor define declaration
140DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
141DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
142DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
143DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
144DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
145DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
146DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_TINY)
147DEFS_386 = $(DEFINES_386:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
148DEFS_386_LARGE = $(DEFINES_386_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
149DEFS_CUSTOM = $(DEFINES_CUSTOM:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_CUSTOM)
150
151# Add -I in front of all header directories
152IHEADERS = $(HEADERS:%=-I%)
153
154# Path + target file to be built
155TARGET = $(BUILD_DIR)/$(PROG)
156
157
158#########################
159# Compilers and linkers #
160#########################
161
162# Make
163MAKE = mingw32-make.exe
164
165# Assembler
166AS = nasm.exe
167
168# use this command to erase files.
169RM = -del /Q
170
171
172#############################
173# Compiler and linker flags #
174#############################
175
176# Assembly compiler flags
177ASFLAGS = -f bin # Produce binary object files
178ASFLAGS += $(IHEADERS) # Set header file directory paths
179ASFLAGS += -Worphan-labels # Warn about labels without colon
180ASFLAGS += -Ox # Optimize operands to their shortest forms
181
182
183############################################
184# Build process. Actual work is done here. #
185############################################
186
187all: clean small large
188 @echo All done!
189
190small: xt_tiny xt xtplus at 386
191 @echo All small binaries built!
192
193large: xt_large xtplus_large at_large 386_large
194 @echo All large binaries built!
195
196at:
197 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
198 @echo * Small AT version "$(TARGET)_at.bin" built.
199
200at_large:
201 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
202 @echo * Large AT version "$(TARGET)_atl.bin" built.
203
204xtplus:
205 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
206 @echo * Small XT Plus version "$(TARGET)_xtp.bin" built.
207
208xtplus_large:
209 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
210 @echo * Large XT Plus version "$(TARGET)_xtpl.bin" built.
211
212xt:
213 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
214 @echo * Small XT version "$(TARGET)_xt.bin" built.
215
216xt_large:
217 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
218 @echo * Large XT version "$(TARGET)_xtl.bin" built.
219
220xt_tiny:
221 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin"
222 @echo * Tiny XT version "$(TARGET)_tiny.bin" built.
223
224386:
225 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
226 @echo * Small 386 version "$(TARGET)_386.bin" built.
227
228386_large:
229 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -l"$(TARGET)_386l.lst" -o"$(TARGET)_386l.bin"
230 @echo * Large 386 version "$(TARGET)_386l.bin" built.
231
232custom:
233 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_CUSTOM) -l"$(TARGET)_custom.lst" -o"$(TARGET)_custom.bin"
234 @echo * Custom version "$(TARGET)_custom.bin" built.
235
236strings: src\Strings.asm
237 @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
238 @perl ..\Tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
239 @echo StringsCompressed.asm updated!
240
241clean:
242 @$(RM) $(BUILD_DIR)\*.*
243 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
244
245checksum: all
246 @perl ..\Tools\checksum.pl $(TARGET)_tiny.bin $(BIOS_SIZE_TINY)
247 @perl ..\Tools\checksum.pl $(TARGET)_xt.bin $(BIOS_SIZE_SMALL)
248 @perl ..\Tools\checksum.pl $(TARGET)_xtp.bin $(BIOS_SIZE_SMALL)
249 @perl ..\Tools\checksum.pl $(TARGET)_at.bin $(BIOS_SIZE_SMALL)
250 @perl ..\Tools\checksum.pl $(TARGET)_xtl.bin $(BIOS_SIZE_LARGE)
251 @perl ..\Tools\checksum.pl $(TARGET)_xtpl.bin $(BIOS_SIZE_LARGE)
252 @perl ..\Tools\checksum.pl $(TARGET)_atl.bin $(BIOS_SIZE_LARGE)
253 @perl ..\Tools\checksum.pl $(TARGET)_386.bin $(BIOS_SIZE_SMALL)
254 @perl ..\Tools\checksum.pl $(TARGET)_386l.bin $(BIOS_SIZE_LARGE)
255
256unused:
257 @echo "XT Tiny"
258 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -o"$(TARGET)_unused_tiny.asm" -l"$(TARGET)_unused_tiny.lst"
259 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -o"$(TARGET)_unused_tiny.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
260 @perl ..\Tools\unused.pl $(TARGET)_unused_tiny.lst $(TARGET)_unused_tiny.asm
261 @echo "XT Small"
262 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst"
263 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
264 @perl ..\Tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm
265 @echo "XT Large"
266 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst"
267 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
268 @perl ..\Tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm
269 @echo "XT Plus Small"
270 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -o"$(TARGET)_unused_xtp.asm" -l"$(TARGET)_unused_xtp.lst"
271 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -o"$(TARGET)_unused_xtp.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
272 @perl ..\Tools\unused.pl $(TARGET)_unused_xtp.lst $(TARGET)_unused_xtp.asm
273 @echo "XT Plus Large"
274 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -o"$(TARGET)_unused_xtpl.asm" -l"$(TARGET)_unused_xtpl.lst"
275 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -o"$(TARGET)_unused_xtpl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
276 @perl ..\Tools\unused.pl $(TARGET)_unused_xtpl.lst $(TARGET)_unused_xtpl.asm
277 @echo "AT Small"
278 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst"
279 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
280 @perl ..\Tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm
281 @echo "AT Large"
282 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst"
283 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
284 @perl ..\Tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm
285 @echo "386 Small"
286 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -o"$(TARGET)_unused_386.asm" -l"$(TARGET)_unused_386.lst"
287 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -o"$(TARGET)_unused_386.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
288 @perl ..\Tools\unused.pl $(TARGET)_unused_386.lst $(TARGET)_unused_386.asm
289 @echo "386 Large"
290 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -o"$(TARGET)_unused_386l.asm" -l"$(TARGET)_unused_386l.lst"
291 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -o"$(TARGET)_unused_386l.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
292 @perl ..\Tools\unused.pl $(TARGET)_unused_386l.lst $(TARGET)_unused_386l.asm
293
Note: See TracBrowser for help on using the repository browser.