source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 518

Last change on this file since 518 was 511, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Large builds are now 12k to allow more features in the future.
File size: 12.6 KB
Line 
1####################################################################################################
2# Makefile to build XTIDE Universal BIOS. #
3# #
4# Valid makefile targets are: #
5# all Removes existing files and builds binary files in \Build #
6# small Builds 8 kiB binaries only (without checksum) #
7# large Builds 12 kiB binaries only (without checksum) #
8# clean Removes all files from \Build #
9# checksum* Builds all and then generates checksum byte to all binary files #
10# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
11# unused* Checks if there are any unused functions that can be removed to save space #
12# #
13# * at the end of target name means that Perl is required for the job. #
14# Build directory must be created manually if it does not exist. #
15# #
16# #
17# Following modules can be included or excluded: #
18# MODULE_8BIT_IDE Support for 8-BIT IDE cards like XTIDE #
19# MODULE_8BIT_IDE_ADVANCED Support for memory mapped and DMA based cards like JRIDE and XTCF #
20# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers #
21# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
22# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
23# MODULE_HOTKEYS Hotkey Bar to boot from any drive #
24# MODULE_IRQ IDE IRQ support #
25# MODULE_SERIAL Virtual hard disks using serial port #
26# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
27# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
28# MODULE_FEATURE_SETS Power Management support #
29# #
30# Not modules but these affect the assembly: #
31# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
32# RELOCATE_INT13H_STACK Relocates INT 13h stack to top of stolen conventional memory #
33# RESERVE_DIAGNOSTIC_CYLINDER Reserve one L-CHS cylinder for compatibility with old BIOSes #
34# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
35# USE_286 Use instructions supported by 286 and later (defines USE_UNDOC_INTEL)#
36# USE_386 Use instructions supported by 386 and later (defines USE_286) #
37# USE_AT Use features supported on AT and later systems (not available on XT) #
38# USE_UNDOC_INTEL Optimizations for Intel CPU:s - do NOT use on NEC V20/V30/Sony CPU:s #
39# #
40####################################################################################################
41
42###########################################
43# Source files and destination executable #
44###########################################
45
46# Assembly source code file (*.asm):
47SRC_ASM = Src/Main.asm
48
49# Program executable file name without extension:
50PROG = ide
51
52
53#######################################
54# Destination and include directories #
55#######################################
56
57# Directory where binary file will be compiled to
58BUILD_DIR = Build
59
60# Subdirectories where included files are:
61HEADERS = Inc/
62HEADERS += Inc/Controllers/
63HEADERS += Src/
64HEADERS += Src/Handlers/
65HEADERS += Src/Handlers/Int13h/
66HEADERS += Src/Handlers/Int13h/EBIOS/
67HEADERS += Src/Handlers/Int13h/Tools/
68HEADERS += Src/Handlers/Int19h/
69HEADERS += Src/Device/
70HEADERS += Src/Device/IDE/
71HEADERS += Src/Device/MemoryMappedIDE/
72HEADERS += Src/Device/Serial/
73HEADERS += Src/Initialization/
74HEADERS += Src/Initialization/AdvancedAta/
75HEADERS += Src/Menus/
76HEADERS += Src/Menus/BootMenu/
77HEADERS += Src/Libraries/
78HEADERS += Src/VariablesAndDPTs/
79
80# Subdirectories where library files are:
81LIBS = ../Assembly_Library/Inc/
82LIBS += ../Assembly_Library/Src/
83LIBS += ../Assembly_Library/Src/Display/
84LIBS += ../Assembly_Library/Src/File/
85LIBS += ../Assembly_Library/Src/Keyboard/
86LIBS += ../Assembly_Library/Src/Menu/
87LIBS += ../Assembly_Library/Src/Menu/Dialog/
88LIBS += ../Assembly_Library/Src/String/
89LIBS += ../Assembly_Library/Src/Time/
90LIBS += ../Assembly_Library/Src/Util/
91LIBS += ../Assembly_Library/Src/Serial/
92LIBS += ../XTIDE_Universal_BIOS/Inc/
93HEADERS += $(LIBS)
94
95
96#################################################################
97# Assembler preprocessor defines. #
98#################################################################
99DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_EBIOS MODULE_FEATURE_SETS RESERVE_DIAGNOSTIC_CYLINDER
100DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE_ADVANCED
101
102DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE_ADVANCED
103DEFINES_XTPLUS = $(DEFINES_COMMON) $(DEFINES_XT) USE_186
104DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 RELOCATE_INT13H_STACK MODULE_IRQ MODULE_ADVANCED_ATA
105
106DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE)
107DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE)
108DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
109
110DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE
111DEFINES_386_8K = $(DEFINES_AT) USE_386
112
113DEFINES_ALL_FEATURES = MODULE_8BIT_IDE MODULE_8BIT_IDE_ADVANCED MODULE_ADVANCED_ATA MODULE_EBIOS MODULE_BOOT_MENU MODULE_HOTKEYS MODULE_IRQ MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_STRINGS_COMPRESSED MODULE_FEATURE_SETS
114
115
116###################
117# Other variables #
118###################
119
120# Target size of the ROM, used in main.asm for number of 512B blocks and by checksum Perl script below
121BIOS_SIZE = 8192 # For BIOS header (use even multiplier!)
122ROMSIZE = $(BIOS_SIZE) # Size of binary to build when building with make checksum
123BIOS_SIZE_LARGE = 12288
124ROMSIZE_LARGE = $(BIOS_SIZE_LARGE)
125
126# Add -D in front of every preprocessor define declaration
127DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
128DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
129DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
130DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
131DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
132DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
133DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
134DEFS_386_8K = $(DEFINES_386_8K:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE)
135DEFS_ALL_FEATURES = $(DEFINES_ALL_FEATURES:%=-D%)
136
137# Add -I in front of all header directories
138IHEADERS = $(HEADERS:%=-I%)
139
140# Path + target file to be built
141TARGET = $(BUILD_DIR)/$(PROG)
142
143#########################
144# Compilers and linkers #
145#########################
146
147# Make
148MAKE = mingw32-make.exe
149
150# Assembler
151AS = nasm.exe
152
153# use this command to erase files.
154RM = -del /Q
155
156
157#############################
158# Compiler and linker flags #
159#############################
160
161# Assembly compiler flags
162ASFLAGS = -f bin # Produce binary object files
163ASFLAGS += $(IHEADERS) # Set header file directory paths
164ASFLAGS += -Worphan-labels # Warn about labels without colon
165ASFLAGS += -Ox # Optimize operands to their shortest forms
166
167
168############################################
169# Build process. Actual work is done here. #
170############################################
171
172all: clean small large
173 @echo All done!
174
175small: xt_tiny xt xtplus at 386_8k
176 @echo All small binaries built!
177
178large: xt_large xtplus_large at_large
179 @echo All large binaries built!
180
181at:
182 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
183 @echo * Small AT version "$(TARGET)_at.bin" built.
184
185at_large:
186 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
187 @echo *Large AT version "$(TARGET)_atl.bin" built.
188
189xtplus:
190 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
191 @echo * Small XT Plus version "$(TARGET)_xtp.bin" built.
192
193xtplus_large:
194 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
195 @echo *Large XT Plus version "$(TARGET)_xtpl.bin" built.
196
197xt:
198 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
199 @echo * Small XT version "$(TARGET)_xt.bin" built.
200
201xt_large:
202 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
203 @echo *Large XT version "$(TARGET)_xtl.bin" built.
204
205xt_tiny:
206 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin"
207 @echo * Tiny XT version "$(TARGET)_tiny.bin" built.
208
209386_8k:
210 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_8K) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
211 @echo * Small 386 version "$(TARGET)_386.bin" built.
212
213strings: src\Strings.asm
214 @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
215 @perl ..\tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
216 @echo StringsCompressed.asm updated!
217
218clean:
219 @$(RM) $(BUILD_DIR)\*.*
220 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
221
222checksum: all
223 @perl ..\tools\checksum.pl $(TARGET)_tiny.bin $(ROMSIZE)
224 @perl ..\tools\checksum.pl $(TARGET)_xt.bin $(ROMSIZE)
225 @perl ..\tools\checksum.pl $(TARGET)_xtp.bin $(ROMSIZE)
226 @perl ..\tools\checksum.pl $(TARGET)_at.bin $(ROMSIZE)
227 @perl ..\tools\checksum.pl $(TARGET)_xtl.bin $(ROMSIZE_LARGE)
228 @perl ..\tools\checksum.pl $(TARGET)_xtpl.bin $(ROMSIZE_LARGE)
229 @perl ..\tools\checksum.pl $(TARGET)_atl.bin $(ROMSIZE_LARGE)
230 @perl ..\tools\checksum.pl $(TARGET)_386.bin $(ROMSIZE)
231
232unused:
233 @echo "All Features"
234 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -l"$(TARGET)_unused.lst"
235 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
236 @perl ..\tools\unused.pl $(TARGET)_unused.lst $(TARGET)_unused.asm
237 @echo "XT Small"
238 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst"
239 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
240 @perl ..\tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm
241 @echo "XT Large"
242 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst"
243 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
244 @perl ..\tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm
245 @echo "AT Small"
246 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst"
247 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
248 @perl ..\tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm
249 @echo "AT Large"
250 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst"
251 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
252 @perl ..\tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm
253
254
Note: See TracBrowser for help on using the repository browser.